XPARTCO W11688995 Washer Water Inlet Valve - Compatible with Whirlpool, Maytag, Amana, Inglis Washers

Product Description

Restore your washer’s performance with the Replacement W11688995 Washer Water Inlet Valve. This high-quality replacement dual-coil cold water inlet valve replaces the Whirlpool W11688995, designed for select Whirlpool, Maytag, Amana, Inglis, and other front-load washing machines. Constructed with durable ABS plastic and reliable solenoids, it controls cold water flow into the washer during fill cycles, ensuring precise operation. It fixes issues like no water flow, slow filling, water leaks, fabric softener dispenser not emptying.

Note: Inspect fill hoses for cracks or dryness and consider replacing them to prevent leaks. Check the hot water valve (W11688994) and motor pulley for wear if issues persist.

Replaces part numbers: W11688995, W11316256, W11036930, W11486361, AP7218603, PS17216730, EAP12711564

Compatibility:

Compatible with models including but not limited to:

• Whirlpool: WFW560CHW0, WFW560CHW1, WFW560CHW2, WFW5620HW0, WFW5620HW1, WFW5620HW2, WFW5620HW3, WFW6620HC0, WFW6620HC1, WFW6620HW0

• Maytag: MHW5630HC0, MHW5630HC2, MHW6630HC1, MHW8630HC2

• Amana: NFW5800HW0, NFW5800HW1, NFW5800HW2, NFW5800HW4

• Inglis: IFW5900HW0, IFW5900HW1

Verify your model number or contact support for assistance.

Key Features:

• ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, KitchenAid, Jenn-Air, Magic Chef, and other front-load washer models.

• 🔥 Specifications: Dual-coil cold water inlet valve, 120V, 60Hz, made of durable ABS plastic with reliable solenoids, 1/2" threaded NPT inlet with screen, two push-on outlet connections, solenoid resistance 500–1500 ohms.

• 💰 Cost-Effective Alternative: Replacement part offers OEM-equivalent performance at a lower price.

• 🛠️ Easy Installation: Requires a Phillips screwdriver, 1/4" nut driver, pliers, and work gloves; typically installed in 20–40 minutes.

• 🛡️ Reliable Fixes: Resolves no water flow, slow filling, leaks, fabric softener dispenser issues, or error codes (F8E1, LO FL).

Installation Notes:

• Tools Needed: Phillips screwdriver, 1/4" nut driver, pliers, work gloves, towels.

• Safety First: Unplug the washer and shut off the hot and cold water supplies before installation.

• Handle with Care: Take photos of wire and hose connections before disassembly to ensure correct reconnection. Test solenoid continuity (500–1500 ohms) with a multimeter to confirm valve failure. Inspect fill hoses and replace if cracked or dry to prevent flooding.