ERP IG9400 Gas Oven Igniter Replaces: Electrolux #316489400. Flat style|16" lead wires|1-1/2" ceramic block Description: This Flat Style Oven Igniter Kit is a high-quality replacement part for specific Frigidaire gas ranges and wall oven models. It functions to ignite the gas to light the oven burner. This does not replace round igniters, or igniters with blue ceramic.  When you turn on the oven, the igniter is activated, and it starts to glow hot. As it heats up, it ignites the gas that is released from the oven's burner. This process continues until the oven reaches the desired temperature. Replaces Part Numbers: 316489400, 1197384, 316428500, 316428501, 5304462661, 7316489400, AH1528534, EA1528534, AP3963540, PS1528534.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only: WARNING: California’s Proposition 65 

Read more less

ERP IG10016 Gas Oven Igniter Replaces: Electrolux #5303131300, GE #WB2X10016, Invensys #41-209. Flat style|Has (1) 15" lead wire to disconnect block with additional 12" lead and (1) 8" lead wire 1-1/2" ceramic block Includes male/female two pin quick disconnect and jumper wires with 3/16" & 1/4" female crimped terminals Fits Specific Electrolux, Frigidaire, GE Gas Oven models. Replaces Part Numbers:5304509706, 316489402, 316489408, 316119301, 4545981, AP6230715, PS12071409, WB2X10016, WB02X10016, 1704, AH241804, EA241804, AP2009619, PS241804. Description: This Oven Igniter is a replacement part for select Frigidaire, Kenmore, GE gas oven models, designed to ignite the gas in the oven burner to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP 7432P136-60 Gas Oven Igniter 3.4 - 3.6 Amp, 1.5" block, 3.75" cage w/90° bkt, 7.75" leads w/male spade Replaces both back or broil igniter for specific Amana, Magic Chef, Whirlpool Ranges Description: This Oven Igniter is a replacement part that guarantees optimal performance for your oven. It is a crucial component that provides the necessary ignition to start the gas flow and ignite the oven burner. This specific igniter is designed for horizontal mounting, ensuring proper positioning and efficient ignition. It is a vital component that helps your oven reach the desired temperature quickly and maintain it throughout the cooking process. Replaces Part Numbers: WP7432P136-60, 7432P136-60, 1544454, 31991701, 32009801, 74008064, 7432P131-60, AP6011349, PS11744545, WP7432P136-60VP.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP 00612817 Cooktop Surface Burner Igniter Surface burner igniter electrode.   For Bosch, Thermador Replaces Part Numbers:  00612817, 612817, AH3477958, EA3477958, PS3477958, AP4434211, PS8727623. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP W10515459 Range Surface Burner Spark Electrode Replaces Part Numbers: WPW10515459, W10515459, W11194809, W11246789, AP6022541, PS11755874.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

74005890 Gas Range Spark Electrode Set Product Title Aftermarket 74005890 Gas Range Spark Electrode Set - Compatible with Jenn-Air, Whirlpool Ranges, Includes 2 Electrodes, Terminal Block, Wires Product Description Ensure consistent burner ignition with the 74005890 Gas Range Spark Electrode Set from Parts-O-Matic. This high-quality aftermarket set replaces the original 74005890, featuring two spark electrodes, a terminal block, and wires for select Jenn-Air and Whirlpool gas ranges. Designed for reliable sparking, it’s ideal for fixing burners that fail to light, spark weakly, or cause continuous clicking. Enjoy free shipping on all orders at Parts-O-Matic! Key Features: ✅ Broad Compatibility: Fits select Jenn-Air, Whirlpool, and other brand gas range models. 🔥 Reliable Ignition: Includes two ceramic electrodes for consistent sparking to ignite burners efficiently. 💰 Cost-Effective Alternative: Aftermarket set offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Includes terminal block and wires for straightforward replacement; requires a Phillips screwdriver and 10–20 minutes. 🛡️ Fixes Common Issues: Resolves burners not lighting, weak sparks, continuous clicking, or gas smell without ignition. Compatibility: Compatible with models including but not limited to: Jenn-Air: JDS9860AAP, JDS9860ACB, JDS9860ACS, JDS9860ACW, JGR8850ADW Whirlpool: GW395LEPB, GW395LEPQ, GW395LEPS Replaces part numbers: WP74005890, 74005890, 74006098, 7432P120-60, 895262, AP6010920, PS11744110, EAP11744110, PD00004364 Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance. Installation Notes: Tools Needed: Phillips screwdriver, putty knife, needle nose pliers, 1x4 wood piece (to prop range top). Safety First: Unplug the range and shut off the gas supply before installation. Steps: Remove burner grates and caps, use a putty knife to release the range top’s spring clips, prop the top with a 1x4 wood piece, unscrew the old electrodes, disconnect the wires from the terminal block, and install the new electrodes and terminal block with included wires. Adjust the electrode tip if sparking is weak (avoid cracking the ceramic). Test burners after reassembly. Installation takes 10–20 minutes. Download our installation guide or watch our YouTube tutorial for step-by-step instructions. Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Get your gas range burners lighting perfectly today! Add to cart now for an affordable fix with free shipping on your entire order!

Read more less

755058CM Gas Range Oven Igniter 3.4 - 3.6 Amp, 1.5" block, 3.75" cage, 11" leads with two pin connector. Fits specific Bosch, Thermador gas oven models. Replaces Part Numbers:00755058, 755099, 755058, AP5809118, PS9495615. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65

Read more less

5304506545CM Gas Oven Igniter 3.2 - 3.6 amp, 1.25" block, open cage, with 7" lead. Fits Specific Electrolux, Frigidaire gas ranges. Replaces Part Numbers:5304506545, 316489404, 4455997, 7316489404, AP6036346, PS11770500.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Choice WB13X25500 Gas Range Oven Igniter - Compatible with GE, Hotpoint, RCA Ranges Product Description Restore your gas oven’s baking performance with the Choice WB13X25500 Gas Range Oven Igniter from Parts-O-Matic. This high-quality replacement flat-style glow bar igniter replaces the GE WB13X25500, designed for select GE, Hotpoint, and RCA gas ranges with hot surface ignition systems. Featuring a 3.5-inch ceramic body, 18-inch lead wires with a quick-disconnect plug, and a 3.2–3.6 amp rating at 120V, it heats to open the oven safety valve and ignite the gas burner. It’s a cost-effective solution for ovens that won’t start, heat unevenly, emit a gas smell without igniting, or experience delayed ignition. Handle with care to avoid damaging the fragile silicon carbide element.  Enjoy fast and free shipping on all orders at Parts-O-Matic! Note: If the igniter glows but doesn’t ignite, check the gas safety valve for proper function. Replaces part numbers: WB13X25500, 223C3381G029, 501RB, 180220MT1, AP5986244, PS11726670, PD00041940, 41-228, IGNA033, PCP447 Compatibility: Compatible with models including but not limited to: GE: JGB660SEJ4SS, JGB700SEJ4SS, PGB911SEJ2SS, JGB735DP1BB, PGS930BEL3TS, CGS986SEL2SS Hotpoint: RGB series RCA: Select gas range models Verify your model number or contact Parts-O-Matic support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and RCA gas range models for lower oven bake functions. 🔥 Specifications: Flat-style glow bar igniter with 3.5" ceramic body, 10" lead wires with quick-disconnect plug, draws 3.2–3.6 amps at 120V for reliable ignition. 1.25" block, open cage, with 10" lead. 💰 Cost-Effective Alternative: This replacement part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Includes two ceramic wire nuts and quick-disconnect plug; requires a Phillips screwdriver, socket set, and pliers; typically installed in 15–20 minutes. 🛡️ Reliable Fixes: Resolves issues like no ignition, uneven heating, gas smell, delayed ignition, or oven not reaching set temperature. Installation Notes: Tools Needed: Phillips screwdriver, small socket set or nut driver, needle-nose pliers, wire splicing tool. Safety First: Disconnect power and shut off the gas valve before installation. Handle with Care: Avoid touching the silicon carbide element with bare hands, as oils can shorten the igniter’s lifespan. Wear nitrile gloves during handling. Installation Steps: Pull the oven away from the wall, unplug power, and turn off the gas line. Remove the oven bottom panel (2 screws) and access the igniter via the drawer area or rear panel. Unplug the igniter’s wire harness, unscrew the igniter (2 screws), and pull wires through. If the quick-disconnect plug doesn’t match, cut and splice wires using the included ceramic wire nuts. Install the new igniter, reassemble, and tuck excess wires near the gas safety valve to avoid heat exposure. Note: Fused or rusted screws may require a Dremel tool; removing the oven door aids access. If the igniter glows but doesn’t ignite, test the gas safety valve. Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your gas range back to perfect performance today! Add to cart now for a budget-friendly fix with fast and free shipping on your entire order!

Read more less

ERP WB23X5340 Range Oven Temperature Sensor 2-1/8" probe Replaces Part Numbers: WB23X5340, WB23T10002, 253024, AH236490, AP2023913, EA236490, PS236490, WB20K5035, WB20K5040, WB24X5340.   This is an aftermarket part that can be used as a replacement for the OEM part.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less