W11087438 Refrigerator Genuine Evaporator Fan Motor
Replaces Part Number: W11087438, 4534150, W10727641, W10799016, AP6048055, PS12070640.
Description: The Evaporator Fan Motor is a Genuine OEM part for Whirlpool refrigerators. It circulates air over the refrigerator's evaporator coils, which helps maintain a consistent and even temperature throughout the fridge and freezer compartments. This ensures that your food stays fresh and properly cooled.
W11104452CM Refrigerator LED Light Module
LED light module with white bezel, flat lens and two male pin connector on board.
Fits specific Whirlpool SxS refrigerators.
Replaces Part Numbers: W11104452, W10497505, W10550215, OEM24923598, AP6230899, PS12070918.Description: This LED Light Assembly is a replacement part for specific Whirlpool refrigerator models. It is responsible for illuminating the interior of your refrigerator, providing clear visibility of your food and beverages. A bad LED light can occur due to normal wear and tear, power surges, or electrical malfunctions. If you notice symptoms such as dim or flickering lights, or if the lights are completely non-functional, it may be time to replace the LED light module assembly.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11126005CM Dishwasher Wash Vane Sensor
Description: This Sensor is a replacement component specifically designed for certain Whirlpool dishwasher models. It plays a crucial role in monitoring cycle conditions like temperature and soil levels to automatically customize wash sequences. Causes of a bad sensor can include leaking or faulty wiring disrupting signals over time, mineral buildup gumming internal mechanisms, or damage from impact.
Replaces Part Numbers: W11126005, W11503875, W10380177, W10380483, W10647239, AP6261394, PS12114437.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
W11130362 Washer Genuine OEM Suspension Rod Kit
23-1/2" overall length.
The pack includes four dampers.
Fits Specific Whirlpool 4.5 CF top load washer models.
Replaces Part numbers: W11130362, W11027174, W10780040, W10594080, W10735786, W10748956, W10821710, W10901056, W11033491, W11228718, AP6262443, PS12347546.
🛠️ W11130362 Washer Genuine OEM Suspension Rod Kit
Stop the shaking. Start the cleaning. The W11130362 Suspension Rod Kit is a genuine OEM replacement designed to stabilize your washer tub and eliminate excessive vibration during spin cycles.
If your washer is banging, off-balance, or “walking” across the floor, worn suspension rods are the likely cause. This easy-to-install kit restores proper balance and extends the life of your machine.
✅ Key Features:
Genuine OEM Quality – Factory-approved replacement for W11130362
Vibration Control – Dampens movement for a smooth spin cycle
Includes All 4 Suspension Rods – Complete kit for a full fix
DIY Installation – No special tools required
Compatible with Whirlpool, Maytag, Amana, and more
🔍 Common Washer Issues This Fixes:
Excessive noise or banging during spin
Off-balance or unsteady drum
Washer “walking” or shifting position
Poor spinning or water left in clothes
💡 Why Buy from Parts-O-Matic?We carry only 100% genuine OEM parts—no substitutes. With fast shipping, verified fit, and expert customer service, Parts-O-Matic helps you fix it fast and fix it right the first time.
📦 Replaces Part Numbers:
W11130362, W11027174, W10780040, W10594080, W10735786, W10748956, W10821710, W10901056, W11033491, W11228718, AP6262443, PS12347546.
🧰 Fits Brands & Models:
Whirlpool
Maytag
Amana
Admiral
Roper
Not sure if it fits your washer model? Contact us — we’ll help you match the right part!
W11162091CM Dryer Drum belt
97.625" - 5 Rib poly V belt.
Fits newer Whirlpool dryers with lint filter behind door.
Replaces Parts Numbers:W11162091, W10610886, OEM18834443, AP6278146, PS12347906.
Description: This Belt is a replacement part for specific Whirlpool dryer models. It is responsible for connecting the drum to the motor, enabling the drum to rotate during the drying cycle. This belt ensures that clothes tumble properly for efficient and even drying.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11165546 Washer Genuine Water Valve – Compatible with Whirlpool, Maytag, Kenmore, Amana, Crosley Washers
Product Description
This Valve is a Genuine OEM part for specific Maytag, Whirlpool washing machine models. This component controls the flow of water into the washing machine during the fill cycle, ensuring that the proper amount of water enters the machine based on the selected settings. The valve is crucial for regulating water levels and maintaining the efficiency and effectiveness of the washing process.
Replaces Part Numbers
W11165546, W10839828, 4545980, W10599423, W10758828, W11096267, W11165546VP, PD00037668, EAP12348013, AP6284346, PS12348013.
Compatibility
This genuine water valve is compatible with select Whirlpool, Maytag, Kenmore, Amana, and Crosley washers.
Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWB765FW1, and Kenmore 110.22242511.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Broad Compatibility – Fits Whirlpool, Maytag, Kenmore, Amana, and Crosley washers
💧 Reliable Water Control – Regulates hot and cold water flow into the washer tub
💰 Cost-Effective OEM Replacement – Factory-tested for long-lasting performance
🛠️ DIY Friendly – Installs in 20–30 minutes with standard tools
🛡️ Fixes Common Issues – Resolves filling errors, leaks, and cycle interruptions
📐 Product Specification
Part Number: W11165546
Component Type: Washer Water Valve Assembly
Material: Reinforced plastic housing with metal solenoids
Mounting: Direct-fit replacement
Operating Conditions: Designed for residential washer use
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, adjustable wrench, pliers
⚠️ Safety First: Disconnect power and turn off water supply before installation.
Steps:
Unplug washer and shut off water supply.
Remove the rear access panel to reach the water valve.
Disconnect water hoses and wire connectors from the old valve.
Unscrew and remove the defective water valve.
Install the new W11165546 valve, reconnect hoses and wiring.
Reattach the panel, restore water and power, and run a test cycle.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Fix washer filling issues fast — Add to Cart Now for a safe, factory-approved repair!
W11168740 Washer Genuine OEM Cold Water Inlet Valve
Replaces Part Number: W11168740, WPW10240949, W10240949, W10921514, AP6285450, PS12348073.
120V, 60Hz, two coil cold water valve.
Fits specific Whirlpool top load washer models.
Description: This Water Inlet Valve is a Genuine OEM part for specific Kenmore, Maytag, Whirlpool washing machine models. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. Common causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals.
W11168740 Washer Cold Water Inlet Valve – Genuine OEM Part
Keep your washer running smoothly with the W11168740 Cold Water Inlet Valve. This genuine OEM replacement controls the flow of cold water into your washing machine, ensuring proper fill and wash cycles.
Key Features:
✅ Genuine OEM Part – Reliable, factory-tested quality
🔁 Replaces: WPW10240949, W10240949, W10921514, AP6285450, PS12348073
🚿 Controls cold water flow during fill cycles
🛠️ Fits Whirlpool, Maytag, Amana, and other major brands
🧰 Easy-to-install, direct-fit replacement
⚠️ Disconnect power and water supply before servicing. Contact us to confirm model compatibility.
📦 Part Number: W11168740💯 30-Day Money Back Guarantee
W11168743 Washer Genuine OEM Hot Water Inlet Valve – Compatible with Whirlpool, Maytag, Kenmore Washers
💧 Product Overview
Restore hot water flow to your washing machine with the W11168743 Washer Hot Water Inlet Valve. This Genuine OEM replacement part controls the hot water entry into your top-load washer and is a direct fit for many Whirlpool, Maytag, Kenmore, Amana, and Roper models.
This Hot Water Inlet Valve is a Genuine OEM part for specific Maytag, Kenmore, Whirlpool washing machine models. This part controls the flow of hot water into the washing machine during the wash cycle, ensuring that the machine receives the correct amount of hot water for optimal cleaning performance.
Washer HOT water inlet valve.
Standard hose fitting inlet,
1 water outlet.
🔧 Key Features
🪛 OEM replacement part number: W11168743, WPW10240948, W10240948, 4585634, W10921515, AP6327638, PS12348074.
🔥 Controls hot water flow during wash cycles
🧰 Easy-to-install and fits just like the original
🛡️ Built to last with high-quality materials
💡 Common fix for washer not filling with hot water
🏷️ Compatible Brands
Whirlpool
Maytag
Kenmore
Amana
Roper
💡 Tip: Always match your model number to ensure compatibility.
💡 Why Buy from Parts-O-Matic
🚚 Free shipping across the U.S. — no surprises at checkout
🔧 Experts in washer and appliance parts
✅ OEM parts guarantee – no cheap imitations
😊 Trusted by homeowners and professional technicians
W11168743CM Washer Water Valve (Hot Side)
Washer HOT water inlet valve.
Standard hose fitting inlet,
1 water outlet.
Replaces part Numbers: W11168743, WPW10240948, W10240948, 4585634, W10921515, AP6327638, PS12348074.
Description: This Hot Water Inlet Valve is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. This part controls the flow of hot water into the washing machine during the wash cycle, ensuring that the machine receives the correct amount of hot water for optimal cleaning performance
Ensure your washer fills correctly with hot water using the W11168743 Hot Water Inlet Valve. This factory-tested part regulates hot water flow during wash cycles for optimal cleaning performance.
Key Features:
✅ – This is an aftermarket part that can be used as a replacement for the OEM part. durable and reliable
🔁 Replaces: W11168743, WPW10240948, W10240948, 4585634, W10921515, AP6327638, PS12348074
🚿 Controls hot water input to the washer
🛠️ Compatible with Whirlpool, Maytag, Amana & more
🧰 Simple, direct-fit installation
⚠️ Always disconnect power and water before installation. Contact us to verify model compatibility.
📦 Part Number: W11168743CM💯 30-Day Money Back Guarantee
W11175771 Dishwasher Genuine Water Valve
Replaces Part Numbers: W11175771, W10195047, W10327250, W10872255, W11130744, AP6339872, PS12578165.
120V, 3/4" GHT inlet, 1/2" push on outlet.
Fits select Kenmore, Maytag, Whirlpool dishwasher models
Description: This Water Inlet Valve is a Genuine OEM part for select Kenmore, Maytag, Whirlpool dishwasher models. This component controls the flow of water into the dishwasher, functioning to ensure the right amount of water is supplied during each wash cycle. The valve operates via electronic controls from the dishwasher, responding to the needs of various cycles and adjustments in water pressure.
