WP2323197 Refrigerator Defrost Heater Genuine OEM Replaces Part Numbers: WP2323197, 2323197, 1408374, 2176064, 2188174, AP6007344, PS11740458.   

Read more less

WP3347288 Washer Lower Agitator  Fits Specific Top Load Washer Models. Replaces Part Number: WP3347288, 3347288, 3348245, 3352107, 519233, AP6008022, PS11741151. Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.

Read more less

WP3363003 Washer Upper Agitator Fits Specific Top Load Washer Models. Replaces Part Number: WP3363003, 3363003, 2654, AP6008106, PS11741237. Description: The Upper Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. 

Read more less

WP3363394 Genuine OEM Washer Drain Pump  Direct Drive Washer Drain Pump for Whirlpool, Kenmore, Roper, Estate, Kirkland, and many more  Replaces Part Number: 3363394, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 62516, 63347, 64076, 8235, AP6008107, PS11741239. This pump fits most direct drive washers. The pump outlet is about 1 1/4". The pump comes fully-boxed, brand new, in its original packaging.    

Read more less

WP3363892 Washer Genuine OEM Drain Pump Drain pump for belt-less direct-drive washer Oversized 1-3/4" outlet with flapper with back flow flapper valve Replaces Part Numbers:3363892, 3352496, AP6008110, PS11741242, WP3363892VP, B002CRSNT4, LP121   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WP3368921 Genuine OEM Torx Screw Replaces Part Numbers: WP3368921, 3368921, 3400701, 522970, 7101P685-60, AP6008125, PS11741257, WP3368921VP.      California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Genuine Whirlpool WP3387134 Dryer Cycling Thermostat - Compatible with Whirlpool, Kenmore, Maytag, KitchenAid Product Description Maintain optimal drying temperatures with the Genuine Whirlpool WP3387134 Dryer Cycling Thermostat. This OEM cycling thermostat is designed for select Whirlpool, Kenmore, Maytag, KitchenAid, and other dryers, regulating the heating element by cycling on at 155°F (68°C). It addresses issues like no heat, insufficient heat, overheating, or prolonged drying times, delivering reliable performance as an authentic Whirlpool part. Note: Includes one cycling thermostat. Disconnect power before installation. Check dryer venting and related components for optimal performance. Replaces part numbers: WP3387134, 3387134, 2011, 2893, 3-6910, 306910, 3387135, 3387139, ET187, PD00002313, EAP11741405, WP3387134VP, AP6008270, PS11741405, L155-25F.  Compatibility: Compatible with models including but not limited to: Whirlpool: WED5500XW0, WED5600XW0, WED9400SW0, WGD5500XW0, WED5800BC0 Kenmore: 110.60022010, 110.68002010, 110.87872603 Maytag: MED6000XW0, MED7000XW0 KitchenAid: YKEHX01PMT0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and other dryers. 🔥 Specifications: OEM cycling thermostat, cycles on at 155°F (68°C). 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves no heat, insufficient heat, overheating, or prolonged drying times. Product Specification Part Number: Genuine Whirlpool WP3387134 Component Type: Dryer cycling thermostat Material: Metal and plastic Electrical Specs: Cycles on at 155°F (68°C). Mounting: Screw-mounted near heater housing or exhaust duct Operating Conditions: Suitable for high-heat dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running efficiently today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool WP3387747 Dryer Heating Element - Compatible with Whirlpool, Kenmore, Maytag, KitchenAid Product Description Restore efficient drying with the Genuine Whirlpool WP3387747 Dryer Heating Element. This OEM heating element is designed for select Whirlpool, Kenmore, Maytag, KitchenAid, and other electric dryers, providing consistent heat to dry clothes effectively. It addresses issues like no heat, insufficient heat, or prolonged drying times, delivering reliable performance as an authentic Whirlpool part. Note: Includes one heating element with coiled design. Disconnect power before installation. Check dryer venting and thermostats for related issues to ensure optimal performance. Replaces part numbers: WP3387747, 3387747, 80003, W11045584, PD00002365, EAP11741416, AP6008281, PS11741416, WP3387747VP. Compatibility: Compatible with models including but not limited to: Whirlpool: WED5500XW0, WED5600XW0, WED9400SW0, WGD5500XW0, WED5800BC0 Kenmore: 110.60022010, 110.68002010, 110.87872603 Maytag: MED6000XW0, MED7000XW0 KitchenAid: YKEHX01PMT0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and other electric dryers. 🔥 Specifications: OEM heating element, 5400W, 240V. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes. 🛡️ Effective Fixes: Resolves no heat, insufficient heat, or prolonged drying times. Product Specification Part Number: Genuine Whirlpool WP3387747 Component Type: Dryer heating element Material: Metal (nickel-chromium alloy coil) Electrical Specs: 5400W, 240V, Mounting: Screw-mounted in dryer heater housing Operating Conditions: Suitable for high-heat dryer environments Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer performing optimally today! Add to cart now for a reliable fix!

Read more less

WP3387749 Dryer Genuine OEM Heating Element – Compatible with Whirlpool, Kenmore, Maytag Dryers Product Description Restore your dryer’s heating performance with the WP3387749 Dryer Genuine OEM Heating Element. This factory-approved replacement part generates the heat needed to dry laundry efficiently. A failed heating element may cause your dryer to run but not heat, take longer to dry clothes, or shut down during cycles. Replacing it with this genuine OEM part ensures safe operation and long-lasting performance. Replaces Part Numbers WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418. Compatibility This heating element is compatible with select Whirlpool, Kenmore, Maytag dryers. Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.96573220, and Maytag MEDC215EW1. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Wide Compatibility – Fits Whirlpool, Kenmore, Maytag dryers 🔥 Restores Heating – Generates reliable, consistent heat for drying 💰 Cost-Effective OEM Repair – Genuine part ensures durability and performance 🛠️ DIY Friendly – Installs with standard tools in under 30 minutes 🛡️ Fixes Common Issues – Solves no-heat problems, long drying times, or mid-cycle shutdowns 📐 Product Specification Part Number: WP3387749 Component Type: Dryer Heating Element Material: High-temperature resistant metal coil with mounting housing Mounting: Direct replacement heating element assembly Operating Conditions: Designed for residential dryers Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Nut driver, Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the dryer before beginning repairs to prevent electrical shock. Steps: Disconnect power and remove dryer rear access panel. Locate the heating element housing inside the dryer. Disconnect wire terminals and remove screws securing the old element. Slide out defective element and install the new WP3387749. Reconnect wires, secure housing, and reinstall rear panel. Restore power and test dryer heating. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Get your dryer heating again — Add to Cart Now for a safe, factory-approved repair! WP3387749 Dryer Genuine OEM Heating Element Cross Reference Information   Part Number WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418.

Read more less

WP338906 Dryer Genuine OEM Flame Sensor – Compatible with Whirlpool, Maytag, Kenmore, Amana, Crosley, and Roper Gas Dryers Product Description Ensure your gas dryer heats safely and efficiently with the WP338906 Dryer Genuine OEM Flame Sensor. This factory-approved sensor detects the heat of the igniter and signals the gas valve to open, allowing the burner to ignite properly. A faulty flame sensor can cause the dryer to stop heating or shut off prematurely. Replacing it with this genuine OEM part restores safe ignition and consistent drying performance. Replaces Part Numbers WP338906, 338906, 14205529, 14210083, 14218928, 3-3377, 303377, 35001096, 56231, 63-5013, DC32-00008A, DE353, ER338906, K35-194, PD00002361, EAP11741429, AP6008294, PS11741429, R0611503, TJ90DE353, WP338906VP, Y303377, Y56231, 6501EL3001A, 5303281135. Compatibility This genuine flame sensor is compatible with select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Roper gas dryers. Example compatible models include (but are not limited to): Whirlpool WGD4815EW2, Maytag MGDC465HW0, and Kenmore 110.71202010. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-certified flame sensor for Whirlpool-brand dryers 🔥 Reliable Ignition Detection – Ensures safe gas ignition and consistent heating 💰 Energy Efficient – Prevents wasted gas and improves dryer performance 🛠️ Easy Installation – Installs with a screwdriver in under 20 minutes 🛡️ Fixes Common Issues – Solves dryer not heating, short cycling, or ignition failure 📐 Product Specification Part Number: WP338906 Component Type: Gas Dryer Flame Sensor Material: Metal and high-temperature resistant ceramic Mounting: Direct-fit replacement on burner housing Operating Conditions: Designed for residential gas dryers Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug dryer and shut off gas supply before beginning repairs. Steps: Disconnect power and gas supply. Remove the front lower panel or lint screen housing to access the burner assembly. Locate and unscrew the old flame sensor from the burner tube. Disconnect the wire terminals from the old sensor. Install the new WP338906 sensor and reconnect wires. Reassemble panels, restore power and gas, and test the dryer. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore reliable heat ignition and dryer performance — Add to Cart Now for a safe, factory-approved repair!

Read more less

WP3390719 Dryer Genuine OEM Thermal Fuse – Compatible with Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley Dryers Product Description Protect your dryer from overheating with the WP3390719 Dryer Genuine OEM Thermal Fuse. This disposable, one-time fuse ensures safe operation of your appliance by cutting off power if the temperature exceeds safe limits. A bad thermal fuse can cause your appliance to stop functioning or prevent it from turning on altogether. Symptoms of a bad thermal fuse include no heat or a dryer that won't start. Replaces Part Numbers WP3390719, 3390719, 15-198, 279650, 3389639, 3389640, 660877, 688841, 690198, 690798, 80004, ET402, PD00002330, EAP11741444, AP6008309, PS11741444, WP3390719VP. Compatibility This thermal fuse is compatible with select Whirlpool, Kenmore, Maytag, Amana, Roper, and Crosley dryers. Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.66912690, and Maytag MEDC215EW1. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Wide Compatibility – Fits Whirlpool, Kenmore, Maytag, Amana, Roper, and Crosley dryers 🔒 Built-In Safety – Shuts off dryer if overheating is detected 💰 Cost-Effective OEM Replacement – Durable, factory-tested fuse 🛠️ DIY Friendly – Quick replacement with standard tools 🛡️ Fixes Common Issues – Solves no-heat problems or dryers failing to start 📐 Product Specification Part Number: WP3390719 Component Type: Dryer Thermal Fuse Material: Heat-resistant metal and thermal cutoff components Mounting: Direct-fit replacement, attaches to blower housing Operating Conditions: Designed for residential dryer safety control Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Nut driver, Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always disconnect power before beginning any dryer repair. Steps: Unplug dryer and remove the rear access panel. Locate thermal fuse on blower housing. Disconnect wire terminals from the old fuse. Remove mounting screw and take out the defective fuse. Install new WP3390719 fuse, secure with screw, and reconnect wires. Reattach rear panel, restore power, and test dryer. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your dryer’s safe operation — Add to Cart Now for a reliable, factory-approved repair!

Read more less

Genuine Whirlpool WP3406107 Dryer Door Switch - Compatible with Whirlpool, Kenmore, Maytag Product Description Restore safe and reliable dryer operation with the Genuine Whirlpool WP3406107 Dryer Door Switch. This OEM part is designed for select Whirlpool, Kenmore, Maytag, KitchenAid, and Roper dryers, detecting door status to stop the dryer when the door is opened, preventing unsafe operation. Crafted for precise fit and durability, it addresses issues like the dryer not starting, running with the door open, or failing to stop when the door is opened. Note: Includes one door switch with three terminals. Disconnect power before installation. Test with a multimeter for continuity to confirm failure. Replaces part numbers: WP3406107, WPW10569603, 3406107, W10569603, 3405100, 3405101, 3406100, 3406101, 528948, AP6008561, PS11741701, WP3406107VP. Compatibility: Compatible with models including but not limited to: Whirlpool: LER4634JQ0, LGR5636JQ0, LEQ9508PW0, LGQ9508PW0, LER7646EZ0 Kenmore: 110.62922100, 110.92826100, 110.62932100 Maytag: MDE5500AYW, MDG5500AWW KitchenAid, Roper: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Roper dryers. 🔐 Specifications: OEM door switch with three terminals, designed for precise door status detection. 💪 Reliable Performance: High-quality construction ensures long-lasting operation and safety. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves dryer not starting, running with door open, or not stopping when door is opened. Product Specification Part Number: Genuine Whirlpool WP3406107 Component Type: Dryer door switch Material: Plastic housing with metal contacts Terminals: Three, 1/4" male quick-connect Mounting: Clip-mounted, located near dryer door frame Operating Conditions: Suitable for household dryer environments Compliance: UL listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer safe and functional today! Add to cart now for a reliable fix!

Read more less