XPARTCO 137032600 Dryer Thermal Fuse – Compatible with Frigidaire, Electrolux, and Kenmore Dryers Product Description Protect your dryer from overheating with the XPARTCO 137032600 Dryer Thermal Fuse. This high-quality aftermarket replacement acts as a safety device that shuts off power to the heating element if the dryer overheats. A blown fuse can cause the dryer to stop heating or fail to start. Replacing it with this reliable and affordable XPARTCO fuse ensures safe operation and restores your dryer’s performance. Replaces Part Numbers 137032600, 137060800, 1483164, 7137032600, AH2349395, EA2349395, PD00000890, EAP2349395, AP4368739, PS2349395. Compatibility This replacement thermal fuse fits select Frigidaire, Electrolux, and Kenmore dryers. Example compatible models include (but are not limited to): Frigidaire AEQ6000ES0, Electrolux EIED55HIW0, and Kenmore 417.88042700. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM performance for Frigidaire and Electrolux dryers 🔥 Safety Protection – Prevents overheating by cutting off power to the heating element 💰 Cost-Effective Fix – Affordable alternative to expensive OEM replacements 🛠️ Easy Installation – Direct-fit design for simple DIY replacement 🛡️ Fixes Common Issues – Restores heat function and resolves dryer not starting or heating problems 📐 Product Specification Part Number: 137032600 Component Type: Dryer Thermal Fuse Material: Heat-resistant plastic and metal housing Mounting: Direct-fit installation on heater housing Operating Conditions: Designed for residential electric dryers Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock. Steps: Disconnect power and move dryer away from the wall. Remove the rear access panel to locate the thermal fuse. Disconnect wires and remove screws securing the old fuse. Install the new XPARTCO 137032600 fuse and reconnect wires. Reattach the back panel, restore power, and test heating function. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧰 Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your dryer and restore performance — Add to Cart Now for a reliable, budget-friendly replacement!

Read more less

XPARTCO 137221600 Washer Drain Pump 120V, 60 Htz, 80W, 1.4A. Fits specific Frigidaire, Electrolux, GE front load washer models. Replaces Part Numbers: 137221600, 131724000, 134051200, 134740500, 137108100, 137151800, 137151800KITK, 2754548, TJ137108100, ER137108100, AP5684706, PS7783938, Also replaces GE WH23X10041, 2119312, WH23X10009, WH23X10017, WH23X10031, WH23X10034, AH3502779, EA3502779, AP5324214, PS3502779. Description: This Washer Drain Pump is a replacement part for specific Frigidaire, GE  washing machine models. It plays a crucial role in the washer's operation by removing water from the wash tub at the end of each cycle, ensuring your clothes are properly drained before the spin cycle. Common causes of a bad drain pump can include blockages from debris such as coins, lint, or small items that escape from clothing, as well as motor or impeller damage. Electrical failures can also impair pump function, leading to inadequate water removal.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 137311900 Washer Drain Pump Assembly Replaces Part Number: 137311900, 2688889, AP5630474, PS3655041. Washer drain pump for select Frigidaire, Electrolux washer models. Description: This Drain Pump is a replacement part for select Frigidaire, Electrolux washing machine models. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 154701001 Dishwasher Splash Shield Includes two corner pieces. Fits Electrolux, Frigidaire built dishwashers. Replaces Part Numbers: 154701001, 154685101, AH2203346, EA2203346, AP4338941, PS2203346.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 17476000007453 Dishwasher Water Valve - Compatible with Midea Dishwashers Product Description Restore proper water flow to your dishwasher with the replacement XPARTCO 17476000007453 Dishwasher Water Valve. This replacement water inlet valve is designed for select Midea dishwashers, regulating water flow to ensure effective cleaning. It addresses issues like no water fill, underfilling, or poor cleaning performance, offering a cost-effective alternative to OEM parts. Note: Includes one water inlet valve with compression inlet and barb outlet. Disconnect power and water supply before installation. Verify connector compatibility. Replaces part numbers: 17476000007453, AP7587876, 10A50100. Compatibility: Compatible with models including but not limited to: Compatible with select Midea dishwashers requiring 17476000007453 or 10A50100 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Midea dishwashers. 🔥 Specifications: replacement water inlet valve, DC 12V, 4L/min flow rate, Inlet Connection is 3/4 garden hose type, compression inlet, barb outlet. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no water fill, underfilling, or poor cleaning performance. Product Specification Part Number: XPARTCO 17476000007453 Component Type: Dishwasher water inlet valve Material: Plastic and metal Electrical Specs: DC 12V, 4L/min flow rate Connections: Compression inlet, barb outlet Operating Conditions: Suitable for high-humidity kitchen environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dishwasher from the power source and water supply before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher cleaning effectively today! Add to cart now for a budget-friendly fix!

Read more less

2188830 Refrigerator Relay and Overload Kit - Compatible with Whirlpool, Kenmore, KitchenAid, Roper, Estate Refrigerators Product Description Restore your refrigerator’s cooling performance with the replacement 2188830 Refrigerator Relay and Overload Kit. This high-quality kit, designed for Whirlpool, Kenmore, KitchenAid, Roper, and Estate refrigerators, includes a PTC start device, two overloads, one wire jumper, one terminal cover, one electrical cover, and two combination relays to start the compressor motor and protect it from overheating. Constructed from durable plastic, this kit addresses issues like compressor failure, cooling issues, or refrigerator shutdown. Note: Includes one combination of Overload and relays. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: 2188830, 2188829, 2188832, 2188833, 2188844, 2188845, 2188846, 2188847, 2212193, 2212194, 2216697, 2216722, 2220474, 2220475, 2220476, 2220477, 8201531, 8201532, 8201786, 8201786VP, AP3885081, AH993073, EA993073, PS993073, TJ2188830 Compatibility: Compatible with models including but not limited to: Whirlpool: ED2SHAXML12, GS6SHAXKT02, BRS70DBANA00, 7ED5FHEXRS00 Kenmore: 106.44273600, 106.52522101 KitchenAid: KSRS27IKWH02, KSRS27IKSS02, KSRS27IKBT02, KSRS27IKBL02 Roper, Estate: Models requiring 2188830 or compatible relay and overload kits, typically 25 cubic feet and larger Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, KitchenAid, Roper, and Estate refrigerator models, typically 25 cubic feet and larger. 🔥 Specifications: replacement relay and overload kit, includes one PTC start device, two overloads, one wire jumper, one terminal cover, one electrical cover, two combination relays, plastic construction, 7" x 9" x 3", push-on terminals. 💰 Cost-Effective Alternative: replacement kit offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, needle-nose pliers, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves issues like compressor not starting, refrigerator not cooling, or complete shutdown. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your refrigerator running efficiently today! Add to cart now for a budget-friendly fix!

Read more less

2315539 Refrigerator Evaporator Fan Motor - Replaces WP2315539, Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid Refrigerators Product Description Restore efficient cooling to your refrigerator with the Replacement 2315539 Refrigerator Evaporator Fan Motor. This high-quality replacement motor, designed for select Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and other brand refrigerators, circulates air over the evaporator coils to maintain optimal temperatures in the fridge and freezer compartments. Made of durable plastic and metal with an incorporated wire harness, it fixes issues like the fridge or freezer being too warm, excessive noise, or frost buildup due to poor air circulation. Note: Includes one evaporator fan motor with wire harness. Replaces part numbers: WP2315539, 2315539, W10438708, 1372146, 2219689, 2225625,  ESF-U2B, AP6007247, PS11740359. Compatibility: Compatible with models including but not limited to: Whirlpool: WRT318FMDW01, WRT371SZBM01, 8ET1FTKXKT05, 8ET1MTKXKT02, 8ET8FTKXKT03, 8W8TXDGFXT00, ET1CHEXVB00, ER9FHKXVB00, IT14DKXSQ00 Kenmore: 106.60219410, 10632242101, 10632842010, 10632862011, 10632942101, 10639420990 Maytag: A8RXCGFXS00, A8RXCGFXW00, M9RXDGFYM10, MTB2254EEW00 Amana: A8RXEGFXB00, A8TXCWFXW00, A8TXEGFYB00 KitchenAid: KTRC22EMSS00 Verify your model number or contact support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, and IKEA refrigerator models. 🔥 Specifications: Evaporator fan motor, 115V, 60Hz, ~6.22"L x 4.61"W x 4.49"H, black plastic and metal, includes incorporated wire harness (ESF-U2B), two mounting screws, designed for durability and precise fit. 💰 Cost-Effective Alternative: Replacement motor offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a 1/4" nut driver, Phillips screwdriver, work gloves; typically installed in 10–40 minutes. 🛡️ Reliable Fixes: Resolves fridge or freezer too warm, excessive noise, frost buildup, or poor air circulation. Safety First: Unplug the refrigerator or shut off the house circuit breaker and turn off the water supply before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your refrigerator back to optimal cooling today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO 242278801 Refrigerator Temperature Sensor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling accurately with the XPARTCO 242278801 Refrigerator Temperature Sensor. This high-quality replacement monitors the temperature inside the fresh-food and freezer compartments, sending signals to the control board to regulate cooling. A faulty sensor can cause temperature fluctuations, over-freezing, or warm spots. Replacing it with this reliable XPARTCO part ensures consistent temperature control and energy-efficient performance. Replaces Part Numbers 242278801 PD00029820, EAP8760187, AP5802148, 3016441, PS8760187. Compatibility This replacement temperature sensor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFHS2611LBNA, Electrolux E23BC78IPS3, and Kenmore 253.7041341C. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature accuracy and response rate ❄️ Accurate Cooling Control – Monitors refrigerator temperature for consistent performance 💰 Cost-Effective Fix – Reliable alternative to expensive OEM parts 🛠️ Simple Installation – Plug-in design for fast, easy replacement 🛡️ Fixes Common Issues – Solves warm refrigerator, freezing, or inconsistent cooling problems 📐 Product Specification Part Number: 242278801 Component Type: Refrigerator Temperature Sensor (Thermistor) Material: Plastic housing with thermistor probe and wiring harness Resistance Range: Approximately 2.7 kΩ at 77°F (varies by temperature) Mounting: Direct-fit installation in refrigerator liner or evaporator area Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, wire clip removal tool ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove interior shelves for access. Locate the old temperature sensor, usually near the evaporator or rear wall. Disconnect the sensor’s wiring harness and remove clips. Install the new XPARTCO 242278801 sensor in the same position. Reconnect wiring, reassemble interior parts, and restore power. Allow several hours for the refrigerator to stabilize temperature. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

279457 Dryer Heating Element Wire Kit - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your dryer’s heating functionality with the 279457 Dryer Heating Element Wire Kit. This high-quality replacement kit is designed for select Whirlpool, Maytag, Kenmore, Amana, Admiral, and Jenn-Air dryers, repairing damaged or burnt wiring connections to the heating element. It ensures reliable heat delivery at a cost-effective price, addressing issues like no heat or inconsistent heating. Note: Includes one high-temperature wires and one wire connector (female spade connectors, 5/16"). Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: 279457, 279457VP, T2502, AP3134638, PS334206. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED4800BQ0, WED4800XQ0, WED4850BW0, WED4900XW0, WED5321SQ0 Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, Estate (verify compatibility with heating element 4391960) Common models: Kenmore 110.60072990, Maytag MEDC400VW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, and Estate dryers. 🔧 Specifications: kit with one high-temperature wires and one wire nuts, 5/16" female spade connectors. 💪 Reliable Performance: Ensures secure electrical connections for consistent heating element operation. 🛠️ Easy Installation: Requires wire cutters, strippers, and screwdriver; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no heat, inconsistent heating, or burnt wire issues. Product Specification Part Number: Choice 279457 Component Type: Dryer heating element wire kit Material: Heat-resistant metal wires, plastic-insulated connectors Connector Type: 5/16" female spade connectors Operating Conditions: Suitable for high-temperature dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO 279973 Dryer Thermostat Kit - Compatible with Whirlpool, Kenmore, Maytag Product Description Ensure safe and efficient dryer operation with the XPARTCO 279973 Dryer Thermostat Kit. This high-quality replacement part is designed for select Whirlpool, Kenmore, Maytag, KitchenAid, and Roper dryers, regulating temperature to prevent overheating. The kit includes a high-limit thermostat and a thermal cut-off fuse, addressing issues like no heat, overheating, or dryer shutting off prematurely at a cost-effective price. Note: Includes one high-limit thermostat and one thermal cut-off fuse. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: 279973, 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, ER279973, PD00002626, EAP334387, AH334387, AP3094323, EA334387, PS334387.  Compatibility: Compatible with models including but not limited to: Whirlpool: LER4634JQ0, LGR5636JQ0, LEQ9508PW0, LGQ9508PW0, LER7646EZ0 Kenmore: 110.62922100, 110.92826100, 110.62932100 Maytag: MDE5500AYW, MDG5500AWW KitchenAid, Roper: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and Roper dryers. 🔧 Specifications: Replacement kit with high-limit thermostat (L295-80F) and thermal cut-off fuse (352°F). 💪 Reliable Performance: Durable construction ensures precise temperature regulation and safety. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves no heat, overheating, or premature dryer shutdown. Product Specification Part Number: XPARTCO 279973 Component Type: Dryer thermostat kit Material: Metal and plastic components Temperature Ratings: High-limit thermostat: 295°F; Thermal cut-off fuse: 352°F Mounting: Screw-mounted, located near heating element or exhaust duct Operating Conditions: Suitable for household dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely today! Add to cart now for a reliable fix!

Read more less

XPARTCO 280148 Dryer Thermostat Set – Compatible with Whirlpool, Kenmore, Maytag, Roper, Crosley, Amana Dryers Product Description Restore safe and efficient drying with the XPARTCO 280148 Dryer Thermostat Set. This replacement kit includes the high-limit thermostat and thermal cutoff fuse, ensuring your dryer shuts off overheating cycles and prevents potential hazards. A faulty thermostat or cutoff can cause the dryer to overheat, stop heating, or shut down mid-cycle. This set is a cost-effective solution to restore proper dryer function. Replaces Part Numbers 280148, 1175772, 280148VP, PD00002627, FIX991443, EAP991443, AH991443, AP3874047, EA991443, PS991443, WP8557403, 8557403, 1180102, AP6013164, PS11746386. Compatibility This dryer thermostat set is compatible with select Whirlpool, Kenmore, Maytag, Roper, Crosley, and Amana dryers. Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.66912690, Maytag MDE5500AYW. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Fits Whirlpool, Kenmore, Maytag, Roper, Crosley, and Amana dryers 🔒 Safety Protection – Prevents overheating and protects against dryer fires 💰 Cost-Effective Repair Kit – Includes both high-limit thermostat and thermal fuse 🛠️ Easy DIY Installation – Only requires a screwdriver, installs in 20–30 minutes 🛡️ Fixes Common Issues – Restores heating, prevents shutdowns, resolves overheating problems 📐 Product Specification Part Number: 280148 Component Type: Dryer Thermostat Set (high-limit thermostat + thermal cutoff fuse) L146-44C, 295-111F with 50 Ohm thermistor. Material: High-temperature resistant metal and thermal fuse components Mounting: Direct replacement kit with standard connections Operating Conditions: Suitable for residential dryer heating systems Compliance: OEM-equivalent safety and performance standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers ⚠️ Safety First: Always disconnect power before servicing your dryer to avoid electrical shock. Steps: Unplug dryer and locate the heating element housing. Remove screws securing access panel and locate old thermostat and fuse. Disconnect wire terminals from defective components. Replace with new thermostat and cutoff fuse from this kit. Reattach wires, secure components, and reinstall access panel. Restore power and test dryer operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix your dryer’s heating issues quickly — Add to Cart Now for a reliable, budget-friendly repair kit.

Read more less

XPARTCO 280187 Washer Drain Pump Assembly 120V, 60 Hz, 0.70 W. Fits specific Whirlpool Duet/H3 front load washers. Replaces Part Numbers: 280187, 1200164, 285998, 8181684, 8182819, 8182821, AH1485610, AP3953640, EA1485610, PS1485610. Description: The Drain Pump is a replacement part for select Whirlpool made washing machine models that is responsible for removing water from the washer at the end of the wash cycle. The pump forces water out through the drain hose so that clothing comes out free of excess water, making the drying process faster.  This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less