XPHVP-16 Microwave Convection Oven High Voltage Diode – Replaces TurboChef 100481 – Compatible with Commercial & Residential Microwave Models Product Description Restore proper heating performance in your commercial or residential microwave with the XPHVP-16 Microwave Convection Oven High Voltage Diode. This high-quality aftermarket diode replaces TurboChef 100481 and is engineered to handle the elevated heat and voltage levels found in high-speed ovens and convection microwave systems. A failing HV diode can cause the microwave to run without heating, blow fuses, or produce loud humming sounds. Installing this XPHVP-16 diode restores safe high-voltage operation and consistent heating. Replaces Part Numbers XPHVP-16, TurboChef 100481, HV07-16, HVP-16, TBC100481, CKTE100481 equivalent high-voltage microwave diodes.  Compatibility This aftermarket high-voltage diode replaces TurboChef 100481 and fits many commercial and household microwave or convection microwave ovens, including: Fits specific TurboChef models including Bullet, ECO ST, Encore, Encore 2, G5, I3, NGC, NGC2, NGO, Sota/I1, TORNADO 2, i5. Typical compatible equipment includes:TurboChef High-Speed Ovens, and other convection microwave systems requiring a 12–16kV diode. Always verify electrical specifications before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to replace TurboChef 100481 and match OEM electrical performance 🔥 High-Heat & High-Voltage Rated – Built for demanding commercial microwave environments 💰 Cost-Effective Commercial Repair – A reliable alternative to costly OEM replacement parts 🛡️ Solves Common Issues – Fixes no-heat conditions, humming, blown fuses, and weak heating output 📐 Product Specification Part Number: XPHVP-16 Replaces: TurboChef 100481 Component Type: High Voltage Rectifier Diode Voltage Rating: 12–16 kV peak Current Rating: Max. Forward Current 750MA Polarity: Standard microwave HV polarity (stripe = cathode) Material: Heat-resistant high-voltage diode with insulated leads Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Screwdriver, insulated gloves, needle-nose pliers ⚠️ Safety First: Microwave and commercial oven repairs involve dangerously high voltage even when unplugged. Only qualified technicians should replace HV components. Steps (for trained professionals): Disconnect power and properly discharge the HV capacitor. Remove the microwave or oven’s service cover. Locate the HV diode near the capacitor and transformer. Remove the old diode and install the new XPHVP-16, ensuring correct polarity. Reassemble unit and test heating performance. ⏱️ Time Required: 20–30 minutes (professional repair recommended) 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance & Commercial Equipment Parts Supplier 🔄 30-Day Return Policy Restore powerful, consistent heating — Add to Cart Now for a reliable and cost-effective replacement!

Read more less

XPMS32F Microwave Door Switches and Fuse Kit - Compatible with GE, Hotpoint, Kenmore, Whirlpool Microwaves Product Description Restore safe and reliable operation of your microwave with the replacement EXPMS32 Microwave Door Switches and Fuse Kit. This high-quality kit, designed for GE, Hotpoint, Kenmore, and Whirlpool microwaves, includes one normally open (NO) switch, one normally closed (NC) switch, and one 20A ceramic line fuse. The switches ensure the microwave operates only when the door is closed, preventing radiation leaks, while the fuse protects circuits from over-current. Constructed from durable plastic and metal with 3/16" terminals, this kit addresses issues like the microwave not starting, running with the door open, or blowing fuses. Note: Includes one NO switch, one NC switch, and one 20A ceramic fuse. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Note: Switches are not identical; verify NO/NC markings. Normally Open Switch replaces: 3B73362F, 3B73362E, 6600W1K003D, 6600W1K004C, 6600W1K004F, AH3522738, EA3522738, AP4437957, PS3522738, WB24X816, WB24X0816, AP2024324, QSWMA085WRE0, QSWMA168WRZZ, WB24X10180, AH2370055, EA2370055, AP4484237, PS2370055, 00606693, 00415824, 1386418, 35-00-780, 415824, 606693, AH3477005, EA3477005, PS3477005, AP4070531, PS8726630, 00633795, 00415825, 35-00-781, 415825, 4162223, AP5952985, PS10060855, WB23X10019, 1810578, AH3486591, EA3486591, AP4980343, PS3486591, WB24X10204, WB24X10148, WB24X28940, 251201600929, 3025958, AP5790848, PS8754454, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, WB24X10047, WB24X10029, WB24X0815, WB24X10072, WB24X10113, WB24X815, AH237015, EA237015, AP2622452, PS237015, 5304408938, 5304430284, 639405, AH471434, EA471434, AP2151217, PS471434, 5304423463, 892734, AH472733, EA472733, AP2151744, PS472733, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, WB24X10139 1086028, AH953555, EA953555, PS953555, AP3792702, WB24X10140 AH953556, EA953556, AP3792654, PS953556, WB24X829, WB24X10038, WB24X368, WB24X384, WB24X414, WB24X426, WB24X439, WB24X441, WB24X445, WB24X796, WB24X5228, WB24X796, AP2024337, AH237421, EA237421, PS237421, WP56001036, 56001036, 0053464, R0654097, AP6009674, PS11742843, 3405-001034, 3405-000178, 111698, 2028597, AP4044834, PS4131192, WB24X823, WB24X0820, WB24X0823, WB24X820, AH237415, EA237415, AP2024331, PS237415, 5304509460, 5304520020, 5304464099, 4583656, AP6230615, PS12071303, WB24X10146, WB24X28941, AH1019163, EA1019163, MW-7100-33, AP3866977, PS1019163, 5304493153, 5304440026, 3018427, 5303319558, 5304467694, 75304440026, 75304467694, AP5804011, PS8769124, D3V-16G-3C25, SZM-V16-FA63, WB24X823, WB24X830, WB24X829, 3B73362F, WB24X816, WB24X10180, 00606693, WB24X10075, WB24X800, WB24X817, WB24X10112, 5304408937, W10278024, 52001018, AH2367455, EA2367455, AP4453759, PS2367455. Normally Closed Switch replaces: WB24X830, AH237422, EA237422, WB24X0800, WB24X0830, WB24X10075, WB24X800, AP2024338, PS237422, WB24X25397, WB24X817, WB24X10112, WB24X0817, AP6037282, PS11766871, 00606695, 1386420, 606695, AH3477007, EA3477007, AP4067354, PS3477007, PS8726632, 5304408937, 5304509459, 5304464098, 4583655, AP6230614, PS12071302, ANE61784L0AG, AP7040623, WB24X10205, WB24X10147, 251201600930, 3025959, AP5790849, PS8754455, W10269458, W10211973, 1550016, 4393598, 8206347, AH2361111, EA2361111, AP4429884, PS2361111, 6600W1K001C, AP4650823, PS3529293, WB24X824, 253814, WB24X0824, AH237416, EA237416, AP2024332, PS237416, 5304456101, 1198245, 75304456101, AH1532505, EA1532505, AP3960662, PS1532505, 6600W1K001R, 1583495, AH3598700, EA3598700, AP5254801, PS3598700, 3405-001033, DE34-20019A, WP3405-001033, 2028596, 3405-000176, AP4044665, PS4131191, WB24X804 253795, WB24X0422, WB24X0804, WB24X422, AH237397, EA237397, AP2024313, PS237397, WB24X10189, 1810588, AH3486597, EA3486597, AP4980349, PS3486597, 3B73361E, 1325767, 3B73361D, 6600W1K003C, 6600W1K004B, AH3522736, EA3522736, AP4629337, PS3522736 Compatibility: Compatible with models including but not limited to: GE: JES1358WL01, JES1451WJ02, JVM1440WH04, JVM1540SM5SS, JVM3160RF3SS Hotpoint: RVM1435WH01, RVM1535MM2SA Kenmore: 721.62649200, 721.80042700, 721.80412500 Whirlpool: MH1150XMQ0, MH2175XSB0 Other Brands: Frigidaire, Bosch, and other microwaves requiring compatible switches and 20A 6.35 x 32 mm fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, Kenmore, Whirlpool, Frigidaire, and Bosch microwave models. 🔥 Specifications: Switches: One normally open (NO) switch, one normally closed (NC) switch, 16A, 125/250VAC, 3/16" blade terminals, push-button actuator, plastic/metal construction, black/gray color, 1-way circuit, IP00 rating. Fuse: 20A, 250VAC/125VDC, slow-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement kit offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, needle-nose pliers, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves issues like microwave not starting, running with door open, intermittent power, or blown fuses. Installation Notes: Safety First: Disconnect the microwave from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your microwave running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPMSDF1 Microwave Repair Kit This Kit Included following Parts 2 X EXP497 Normally Open Micro switches (16 amp) 1 x EXP499 Normally Closed Switch (16 amp) 2 X EXP20A Ceramic Fast blow Line fuse (20 amp) 2 x EXPHV10 High Voltage Diode CL04-12 EXP497 Cross Reference Info: 3B73362F, WB24X816, 6600W1K003C, QSWMA085WRE0, WB24X829, WB24X10180, 00606693, 00633795, WB23X10019, 251201600929, 5304408938, WB24X10029, 5304408938, 5304423463, 5304440026, WB24X0815, WB24X10038, WB24X10047, WB24X10072, WB24X10139, WB24X10140, WB24X368, WB24X384, WB24X414, WB24X426, WB24X439, WB24X441, WB24X445, WB24X796, WB24X5228, WB24X796, WB24X815, WB24X816, WB24X829, 53001019, 54001080, 54001081, 56001036, 8183561, 8184285, R0654097, R0852501. EXP499 Cross Reference Info: WB24X10075, WB24X800, WB24X830, WB24X0830, AP2024338, 253820, AH237422, EA237422, PS237422, WB24X0800, WB24X0830, WB24X10075, WB24X800WB24X817, WB24X10112, FFSBA016 (No Fuse Included), 00606695, AP4067354,1386420, 606695, AH3477007, EA3477007, PS3477007, PS8726632, 5304408937, 5304509459, 5304464098, 4583655, AP6230614, PS12071302, ANE61784L0AG, AP7040623. EXPHV10 Cross Reference Info: AP2026385, PS239843, WB27X1160, DE91-70063D, AP4236698, PS4235633, 2084375, AP2151558, PS472334, 5304417430, PS3528798, AP4439834, 6021W3B001U, 6851W1A002E, AP3960683, PS1532581, 5304456178, 3518400800, AP4433625, PS2364451, 5304472472, R9800486, AP6014695, PS11747959, WPR9800486, AP5633255, PS4085135, 11QBP0237, AP3792899, PS953886, WB27X10744, PS2370026, WB27X35382, AP4484210, WB18X10449, AP3994109, PS1481239, EA1481239, WB27X10930, AP3187536, PS239704, EA239704, WB27X10562, 13091701, AP6005641 PS11738693, WP13091701, AP6005641, PS11738693, B8383102, AP3207509, PS953843, EA953843, WB27X10687, AP2026017, PS239224, WB27X10107, PS239148, AP2025948, EA239148, WB27X10037, AP6014620, PS11747873, WPDE91-70063D, PS3528798, AP4439834, 6851W1A002E, 6021W3B001R, AP5791119, PS8754690, WB27X21012, AP5791119, 3026361, PS8754690. EXP20A Cross Reference Info: WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525,  AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662.

Read more less

XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-100 Microwave Thermal Cut-Off Fuse 100℃ (212°F), Normally Closed. This high-quality aftermarket safety device is designed to remain closed (conductive) during normal operation and open permanently when temperatures exceed 100℃, cutting power to prevent damage or fire risk. A failed or tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with this correctly rated normally closed fuse restores safe operation and proper protection. Replaces Part Numbers XPMTC-100, MTC-100, Microwave Thermal Fuse 100C NC, 212F Normally Closed Thermal Cutoff, KSD-100LC, WB27X11094, 1556167, AH2370184, EA2370184, PD00044040, EAP2370184, AP4484359, PS2370184, WB27X10909, 1262954, AH1481222, EA1481222, PD00075864, EAP1481222, AP3994059, PS1481222, DE47-20196C, 2079793, DE47-20196A, PD00023369, AP4580114, PS4226487, 5304456094, 1198238, AH1532498, PD00083148, EA1532498, AP3960659, PS1532498. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 100℃ (212°F) NC thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and NC (Normally Closed) configuration before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 100℃ (212°F) Rating – Trips at unsafe temperature levels 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Prevents overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-100 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 100℃ (212°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or microwave cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or cavity. Disconnect wiring and remove the failed fuse. Install the new XPMTC-100 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPMTC-110 Microwave Thermal Cut-Off Fuse 110℃ (230°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-110 Microwave Thermal Cut-Off Fuse 110℃ (230°F), Normally Closed. This high-quality aftermarket safety device is designed to remain closed (conductive) during normal operation and open permanently when internal temperatures exceed 110℃, cutting power to prevent damage or fire risk. A tripped thermal cut-off can cause loss of power or heating failure. Replacing it with the correctly rated NC fuse restores safe operation and proper protection. Replaces Part Numbers XPMTC-110, MTC-110, Microwave Thermal Fuse 110C NC, 230F Normally Closed Thermal Cutoff, WB27X10810, 1086422, AH953949, EA953949, PD00057547, AP3792919, PS953949, 6930W1A003J, 1266877, 1365195, 6930W1A002D, 6930WRT003C, PD00030706, EAP3530463, AP4441844, PS3530463, WB27X11208, WB27X10851, 251201300912, 3026289, PD00034878, EAP8754624, AP5791053, S8754624, WB18X35517, PD00066985, EAP16219519, AP6990372, PS16219519, 5304509449, 5304464074, 4583645, PD00050915, EAP12071292, AP6230604, PS12071292. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 110℃ (230°F) NC thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure. 🔍 What’s the Difference Between NC and NO Thermal Cut-Offs? Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC. Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs). ⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 110℃ (230°F) Rating – Trips at unsafe temperature levels 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Helps prevent overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-110 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 110℃ (230°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or microwave cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or cavity. Disconnect wiring and remove the failed fuse. Install the new XPMTC-110 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F), Normally Closed. This high-quality aftermarket safety device remains closed (conductive) during normal operation and opens permanently when internal temperatures exceed 120℃, cutting power to prevent component damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe operation and proper protection. Replaces Part Numbers XPMTC-120, MTC-120, KSD-120LC, Microwave Thermal Fuse 120C NC, 248F Normally Closed Thermal Cutoff, WB27X1127, 254709, AH239811, EA239811, WB21X0535, WB21X535, PD00023089, EAP239811, AP2026352, PS239811, WB21X10162, 1556022, AH2370041, EA2370041, KSD 120LC, PD00037108, EAP2370041, AP4484224, PS2370041, 5304509474, 5304464093, 4583662, PD00042646, EAP12071309, AP6230621, PS12071309, WB27X11212, 3026293, SE-7350-006, WB24X28948, WB27X10854, PD00044723, EAP8754627, AP5791056, PS8754627, DE47-20059B, 2079767, DE47-20059A, PD00005107, EAP4226453, AP4580112, PS4226453, DE47-20060A, 2079768, PD00036362, EAP4226454, AP4220155, PS4226454, WB27X10567, 946799, AH239709, PD00050529, EA239709, AP3192016, PS239709. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 120℃ (248°F) NC thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure. 🔍 What’s the Difference Between NC and NO Thermal Cut-Offs? Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC. Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs). ⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 120℃ (248°F) Rating – Trips at unsafe temperature levels 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Helps prevent overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-120 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 120℃ (248°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or microwave cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or cavity. Disconnect wiring and remove the failed fuse. Install the new XPMTC-120 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from extreme overheating with the XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F), Normally Closed. This high-temperature safety device is designed to remain closed (conductive) during normal operation and open permanently when internal temperatures exceed 180℃, immediately cutting power to prevent serious damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe and reliable operation. Replaces Part Numbers XPMTC-180, MTC-180, Microwave Thermal Fuse 180C NC, 356F Normally Closed Thermal Cutoff, WB24X29270, 4586233, PD00045446, EAP12170419, KSD1 BR1 180, AP6262395, PS12170419, 6930W1A003X, 1365203, AH3530468, EA3530468, PD00001857, AP4443816, PS3530468. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 180℃ (356°F) NC thermal cutoff. Commonly used near the magnetron, high-heat zones, or cavity protection points. Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure. 🔍 What’s the Difference Between NC and NO Thermal Cut-Offs? Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC. Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs). ⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 180℃ (356°F) Rating – Designed for high-temperature protection zones 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Prevents overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-180 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 180℃ (356°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or high-heat cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or high-heat area. Disconnect wiring and remove the failed fuse. Install the new XPMTC-180 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety under extreme heat conditions — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPMTC-70 Microwave Thermal Fuse 70 ℃ (158 °F)  Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-70 Microwave Thermal Fuse 70 ℃ (158 °F). This high-quality aftermarket safety fuse is designed to permanently interrupt power when internal temperatures exceed safe operating limits. A blown thermal fuse can cause the microwave to lose power, stop heating, or shut down entirely. Replacing it with this reliable XPMTC-70 fuse restores safe operation and helps prevent damage to internal components. Replaces Part Numbers XPMTC-70, MTC-70, Microwave Thermal Fuse 70C, 158F Thermal Cutoff, KSD201 70C, KSD-40LC 70,  Compatibility This universal microwave thermal fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 70 ℃ (158 °F) thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and fuse style before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature cutoff performance 🌡️ 70 ℃ (158 °F) Safety Rating – Activates at unsafe temperature levels 🛡️ Critical Safety Component – Helps prevent overheating and fire risk 💪 Durable Construction – Designed for long-term reliability 💰 Cost-Effective Repair – Affordable alternative to OEM thermal fuses 📐 Product Specification Part Number: XPMTC-70 Component Type: Microwave Thermal Fuse / Thermal Cutoff Temperature Rating: 70 ℃ (158 °F) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Microwave cavity or magnetron temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow time for capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal fuse near the magnetron or cavity. Disconnect wiring and remove the blown fuse. Install the new XPMTC-70 thermal fuse in the same position. Reassemble the unit and restore power. Test microwave operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and functionality — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPU6602-001655 Dryer Drum Belt (Made in USA) 5 Rib, 92" Drum Belt Replaces:  6602-001655, 6602-001314, AP4373659, PS4133825. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPW10240513 Washer Lid Lock Strike Secures the lid during the wash cycle on top loading washer models. Fits Specific top loading Whirlpool, Maytag, Roper Washer Models. Upgrade your washer's security with the XPW10240513 Washer Lid Lock Strike. This replacement for WPW10240513 features W10240513, ensuring a secure lock every time for your peace of mind. Keep your laundry safe and secure with this essential component. Replaces Part Numbers: WPW10240513,  W10240513, AP6017583, PS11750882.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPW10712395 Dishwasher Upper Rack Adjuster Kit contains RH & LH adjuster assemblies and actuators. Fits Whirlpool dishwashers. Replaces Part Numbers: W10712395, W10350375, W10250159, AP5957560, PS10065979.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPWE01X10127 Dryer Drum Roller Fits Specific GE Dryer Models. Replaces Part Numbers:WE01X10127, WE1X10127, AH264443, EA264443, AP3669450, PS264443.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less