WH01X24697 Washer Drive Belt – Replacement for GE and Hotpoint Washers Product Overview This drive belt is a exact replacement part for specific GE washing machine models. The Drive Belt is responsible for rotating the drum of the washing machine, allowing for the proper washing and spinning of clothes. A faulty or broken Drive Belt can result in the drum not spinning properly or not spinning at all. This results in such issues as clothes not being cleaned or water not draining properly. 533J5, 21" long. Replaces Part Numbers Replaces WH01X24697, AP6037512, PS11767488. Engineered to meet or exceed OEM performance and fit specifications. Compatible Brands Compatible with GE and Hotpoint top-load washers, as well as select Haier, Hotpoint, models manufactured by GE. Fits machines that require this specific drive belt configuration. Fixes the Following Issues Washer won’t spin or agitate Squealing or slipping sounds during operation Loose or broken drive belt Poor washing or draining performance Why Buy from Parts‑O‑Matic Cost-effective aftermarket alternative Fast and free U.S. shipping Trusted by appliance repair professionals and DIY users Easy to install – no special tools required

Read more less

WH01X27538 Washer Drive Belt - Compatible with GE, Hotpoint, Haier Washers Product Description Restore your washer’s performance with the replacement WH01X27538 Washer Drive Belt. This high-quality replacement multi-rib belt replaces the GE WH01X27538, designed for select GE, Hotpoint, Haier, Monogram, and Café top-load washing machines. Measuring approximately 22.87" long with 5 ribs and 4 grooves, this durable rubber belt connects the drive motor to the washer drum, enabling proper agitation and spin cycles. It fixes issues like the drum not spinning, loud noises (squeaking or thumping), burning odors, or the washer stopping mid-cycle. Note: Inspect the motor pulley and transmission for wear or oil leaks, as these can cause belt slippage. The belt is a tight fit for durability; use vice grips or a second person to assist installation. Replaces part numbers: WH01X27538, 290D1101P005, 4587903, AP6328256, PS12299369. Compatibility: Compatible with models including but not limited to: GE: GTW220ACK4WW, GTW220ACK5WW, GTW220ACK6WW, GTW330ASK3WW, GTW330ASK4WW, GTW335ASN0WW, GTW335ASN1WW, GTW460ASJ8WW, GTW460ASJ9WW, GTW465ASN1WW, GTW465ASN3WW, GTW585BSV0WS Hotpoint: HTW200ASK3WW, HTW200ASK4WW, HTW240ASK3WS, HTW240ASK4WS, HTW240ASK5WS Haier, Monogram, Café: Select top-load washer models Verify your model number or contact support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, Haier, Monogram, and Café top-load washer models. 🔥 Specifications: Multi-rib belt, 22.87" long, 5 ribs, 4 grooves, made of durable rubber with reinforced construction for stretch resistance. 💰 Cost-Effective Alternative: Aftermarket belt offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a Phillips screwdriver, pliers, vice grips, and work gloves; typically installed in 15–30 minutes. 🛡️ Reliable Fixes: Resolves issues like drum not spinning, no agitation, loud noises, burning odor, or washer stopping mid-cycle. Safety First: Unplug the washer from the power source and shut off the water supply before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Get your washer back to smooth, efficient performance today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO WH01X27954 Washer Lid Switch (Old Style) – Compatible with GE, Hotpoint, and RCA Washers Product Description Restore reliable washer operation with the XPARTCO WH01X27954 Washer Lid Switch (Old Style). This high-quality replacement detects whether the washer lid is closed, allowing safe operation during wash and spin cycles. A broken or faulty switch can cause the washer not to start, stop mid-cycle, or fail to spin. Replacing it with this durable XPARTCO switch restores normal functionality and safety performance. Old-style GE lid switch (does not require harness replacement). Replaces Part Numbers WH08X32697, WH01X27954, WH08X31577, WH01X24114, WH01X26114, 290D1580P001, 290D1580P004, 290D1580P002, 290D1580P003, WH08X31577, AP7015047, PS16554755. Compatibility This replacement lid switch (old style) fits select GE, Hotpoint, and RCA top-load washers. Example compatible models include (but are not limited to): GE GTW220ACK1WW GTW220ACK2WW GTW220ACK3WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW330ASK2WW GTW330ASK3WW GTW330ASK4WW GTW330ASKWW GTW335ASN0WW GTW335ASN2WW GTW335ASNWW GTW460AMJ0WW GTW460AMJ1WW GTW460AMJ2WW GTW460AMJ3WW GTW460AMJ4WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW335ASN0WW. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to match OEM safety and electrical performance 🚪 Lid-Safety Function – Prevents washer from running when the lid is open 💰 Budget-Friendly Fix – Provides reliable performance at a lower cost than OEM parts 🛠️ Plug-and-Play Design – Harness for quick connection 🛡️ Fixes Common Issues – Solves no-start, mid-cycle stop, or spin interruption problems 📐 Product Specification Part Number: WH01X27954 (Old Style) Component Type: Washer Lid Switch Assembly Material: Reinforced plastic housing with electrical harness Mounting: Direct-fit under top panel latch area Operating Conditions: Designed for humid, high-vibration environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Unplug the washer and open the top panel. Remove screws securing the old lid switch assembly. Disconnect the wiring harness from the old switch. Install the new XPARTCO WH01X27954 switch in the same location. Reconnect wiring, secure the switch, and close the panel. Restore power and test washer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s lid-safety operation — Add to Cart Now for a dependable, cost-effective repair.

Read more less

WH01X29528 Washer Door Lock - Compatible with GE, Hotpoint, RCA, Haier, Cafe, Monogram, Profile washers. Product Description Ensure safe and reliable washer operation with the replacement WH01X29528 Washer Door Lock. This high-quality replacement door lock, designed for GE, Hotpoint, RCA, Haier, Cafe, Monogram, Profile, and some Kenmore front-load washers and combo washer-dryers, secures the door during the wash cycle, preventing water leakage and accidental openings. Constructed from durable plastic and metal, it features an automatic locking mechanism and operates at 120V, 60Hz, 16A. This part addresses issues like the door not locking, washer stopping mid-cycle, excessive noise, or error codes related to door lock failure. Note: Includes one door lock assembly. Unplug the washer and wear work gloves during installation. Replaces part numbers: WH01X29528, 4958749, AP6985313, PS12749276, EAP12749276, PD00060769, ITW 12070-71, V13305, 0024000128GE Compatibility: Compatible with models including but not limited to: GE: GFW510SCN0WW, GFW510SCN1WW, GFW550SPN0DG, GFW550SSN0WW, GFW650SPN0SN, GFW650SSN0WW, GFW850SPN0RS, GFW850SSN0WW, PFW950SPT0DS Hotpoint: HTW240ASK0WS RCA: RTW240ASK0WS Haier: HLC1700AXS, HLC1700AXW Cafe: GFW550SSN0WW Monogram: ZWE23ESHSS Profile: PFQ97HSPV0DS, PFW955SPW0DS Kenmore: 2661532413 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, Haier, Cafe, Monogram, Profile, and Kenmore front-load washer and combo washer-dryer models. 🔥 Specifications: replacement door lock assembly, plastic and metal, 120V, 60Hz, 16A, approximately 2.25"L x 2.25"W x 4.5"H, designed for secure locking and durability. 💰 Cost-Effective Alternative: replacement lock offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a Phillips screwdriver, pliers, work gloves; typically installed in 15–45 minutes. 🛡️ Reliable Fixes: Resolves door locking issues, washer stopping mid-cycle, excessive noise, shaking, or door lock error codes. Installation Notes: Safety First: Unplug the washer from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO WH08X37938 Washer Lid Switch Assembly – Compatible with GE, Hotpoint, and RCA Washers Product Description Ensure safe and dependable washer operation with the XPARTCO WH08X37938 Washer Lid Switch Assembly. This Lid Lock Service Kit is a replacement part for specific GE washing machine models. This kit includes the components necessary to ensure that the washer lid remains securely locked during operation, preventing the lid from being opened when the washer is in use. This safety feature is crucial for top-load washers, ensuring safe and efficient operation by preventing access to the washer drum during cycles. Replaces Part Numbers WH08X37938, WH08X32697, WH02X24399, WH08X32657, WH01X26694, WH01X24112, WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X31222, AP7225583, PD00087323, EAP17626546, PS17626546. Compatibility This replacement lid switch assembly fits select GE, Hotpoint, and RCA top-load washers. Example compatible models include (but are not limited to): GE GTW335ASN0WW, GE GTW465ASN1WW, and Hotpoint HTW240ASK6WS. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM safety and performance standards 🚪 Reliable Lid Detection – Prevents washer operation when the lid is open for added safety 💰 Cost-Effective Fix – Delivers OEM-level quality at a lower price 🛠️ Easy Installation – Plug-and-play wiring harness for quick setup 🛡️ Fixes Common Issues – Solves washer not starting, spin interruption, or lid-lock error problems 📐 Product Specification Part Number: WH08X37938 Component Type: Washer Lid Lock / Switch Assembly Material: Reinforced plastic housing with pre-wired electrical harness Mounting: Direct-fit installation beneath washer top panel Operating Conditions: Designed for wet and high-vibration environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Unplug the washer and lift the top control panel. Remove the old lid switch assembly and disconnect the wiring harness. Install the new XPARTCO WH08X37938 switch in the same position. Reconnect the harness and secure the assembly with screws. Close the control panel, restore power, and test washer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s safety and reliability — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO WH10X20821 Washer Door Lock Front Door Washer Door Lock Fits select GE Washer models. Replaces Part Numbers: WH10X20821, AP5958532, PS11699522. Description: This Washer Door Lock Switch Assembly is an essential component for maintaining the security and functionality of select GE washer models. This replacement part ensures reliable door locking, preventing leaks and interruptions during your laundry cycles.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO WH12X955 Washer Lid Switch for GE & Hotpoint Washer/Dryer Combos – Reliable OEM Replacement 🔧 Product Description:Ensure safe and efficient operation for your GE or Hotpoint washer/dryer combo with the XPARTCO WH12X955 Washer Lid Switch, a premium, OEM-compatible replacement. This essential safety switch detects lid closure, preventing the unit from agitating or spinning when open, protecting your appliance and household. Built from high-quality plastic with a secure wiring harness, it provides durable performance and precise activation. Ideal for DIY repairs, this switch resolves issues like non-spinning cycles or error codes in 20–40 minutes. Key Features: 🔧 Broad Compatibility: Fits GE, Hotpoint, and select washer/dryer combo models (see below). 💪 Durable Build: High-impact plastic housing with reliable wiring for long-term use. ⚙️ Simple Installation: Replace with basic tools in minutes – no professional needed. 🔒 Safety-Focused Design: Ensures accurate lid detection to prevent unsafe operation. 🛡️ 30 Days Hassle-Free Return: Shop with confidence with our risk-free return policy. Compatibility:Fits numerous GE and Hotpoint washer/dryer combo models, including: WSM2420D0WW, WSM2420D0CC WSM2420D1WW, WSM2420D2WW WSM2420D3WW, WSM2420SCZAA WSM2420TAACC, WSM2480D1WW WSM2480TBAAA Replaces Part Numbers: WH12X955, 278666, AH270219, EA270219, PD00030733, EAP270219, PS270219, AP2045786, WH12X0955, EXPWH12X955Verify fit with your model’s manual or serial number. Specifications: Material: High-Impact Plastic with Wiring Harness Part Number: WH12X955 (XPARTCO Brand) Installation Instructions: Unplug the washer/dryer combo and turn off the water supply. Remove the top panel by unscrewing rear bolts and sliding it back. Locate the old lid switch near the lid hinge, disconnect the wiring harness, and remove mounting screws. Install the XPARTCO switch, reconnect the harness, and secure in place. Reassemble the panel, plug in, and test a cycle.Shop Now for free, fast shipping and a 30-day hassle-free return policy! Customer Reviews:⭐⭐⭐⭐⭐ “Fixed my GE combo unit's spin problem in 25 minutes – works like new!” – Karen L.⭐⭐⭐⭐⭐ “Perfect fit for my Hotpoint WSM2420, easy install and reliable!” – Steve R. Add to Cart and restore safe, efficient washing today! FAQs:Q: Will this fit my GE washer/dryer combo?A: The XPARTCO WH12X955 fits most GE and Hotpoint combo models. Check your model number or contact support to confirm.Q: Is this an OEM part?A: It’s a premium aftermarket part engineered to meet or exceed OEM standards.Q: How do I install it?A: Use basic tools for a quick swap. Follow our digital guide or YouTube tutorial for step-by-step help.

Read more less

XPARTCO WH23X28418 Washer Drain Pump - Compatible with GE, Hotpoint Product Description Restore your washer’s drainage with the WH23X28418 Washer Drain Pump. This replacement drain pump is designed as a replacement for select GE, Hotpoint, and other compatible front-load washing machines, offering a cost-effective alternative to the original. It efficiently removes water and soap from the washer during the drain cycle, ensuring proper operation. This part addresses issues like water remaining in the drum, noisy operation, failure to drain, or leaks, often caused by a clogged, damaged, or failed drain pump. Note: Includes (1) drain pump and motor with harness. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: WH23X24178, WH23X28418, WH23X27574, 290D1201G001, 290D1201G002, 290D1201G003, PD00055680, EAP12723115, AP6889136, PS12723115. Compatibility: Compatible with select washer models, including but not limited to: GE: GTW485ASJ3WS, GTW485ASJ4WS, GTW485ASJ5WS, GTW490ACJ, GTW500ASN0WS, GTW680BPL0DG, GTW680BPL1DG, GTW720BPN0DG, GTW725BPN0DG, GTW465ASN1WW Hotpoint: HTW240ASK0WS, HTW240ASK2WS, HTW240ASK4WS RCA: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and RCA front-load washers. 🔧 Specifications: 120V, 60Hz, 1.25A, plastic and metal construction, includes pump, motor, and harness. 💪 Reliable Performance: Efficiently removes water and soap for consistent drainage. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves water remaining in drum, noisy operation, failure to drain, or leaks. Product Specification Part Number: XPWH23X28418 Component Type: Washer drain pump Material: Plastic and metal Electrical Specs: 120V, 60Hz, 1.25A, CL.A Run Time: 10 min on, 50 min off. Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO WR07X10131 Refrigerator Compressor Overload Relay Replaces Part Numbers: WR07X10131, WR08X10074, WR08X10089, WR08X10111, WR09X10124, AH2577842, EA2577842, AP4538934, PS2577842. Description:  This Start Device Assembly is a replacement part for Specific GE refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

WR17X11653 Refrigerator Dispenser Ice Door Flapper – Replacement for GE and Hotpoint Product Overview The WR17X11653 Refrigerator Dispenser Ice Door Flapper is an aftermarket replacement part that covers the ice chute in your refrigerator’s dispenser. It opens when dispensing ice and closes to prevent warm air and moisture from entering the freezer compartment. A broken or worn ice flapper can lead to frost buildup, melting ice, and energy inefficiency. Replacing it restores a proper seal and reliable dispenser performance.  This Ice Door Assembly is a replacement part for specific GE refrigerator models. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup. Replaces Part Numbers This part replaces WR17X11653, WR17X3093, WR17X3492, AH964304, EA964304, AP3672582, PS964304. It is designed to match the dimensions and functionality of the original GE part. Compatible Brands Compatible with GE, Hotpoint, and Kenmore refrigerators built by GE. Fits many side-by-side models with front-mounted ice and water dispensers. Fixes the Following Issues Frost or condensation in dispenser area Ice chute not sealing properly Warm air entering freezer compartment Flapper missing, cracked, or stuck Why Buy from Parts‑O‑Matic Reliable aftermarket replacement part Fast and free shipping in the U.S. Easy installation with no special tools Trusted by DIYers and appliance repair pros

Read more less

XPARTCO WR30X10093 Refrigerator OE Ice Maker – Compatible with GE, Hotpoint, and Crosley Refrigerators Product Description Replace your broken or under-performing ice maker with the XPARTCO WR30X10093 Refrigerator OE Ice Maker. This high-quality Original Equipment (OE) replacement produces and dispenses fresh ice automatically, matching the performance and reliability of the factory original. A failed ice maker can result in no ice production, leaking, or jammed cubes. Installing this OE-grade part restores proper ice production quickly and efficiently. What is OE?“OE” (Original Equipment) parts are manufactured to the same specifications, materials, and performance standards as OEM (Original Equipment Manufacturer) components. They deliver identical fit and function but are offered under trusted brands like XPARTCO at a better value for consumers. Replaces Part Numbers WR30X10093, WR30X10102, WR29X10080, WR29X5162, SWR29X5121, SWR29X5126, WR29X0191, WR29X20949, WR29X5007, WR29X5012, WR29X5023, WR30M0149, WR30M0153, WR30X0138, WR30X0147, WR30X0148, WR30X0159, WR30X0169, WR30X0199, WR30X0203, WR30X0213, WR30X0214, WR30X0238, WR30X0241, WR30X0259, WR30X0282, WR30X0283, WR30X0289, WR30X0290, WR30X0304, WR30X0306, WR30X0307, WR30X0315, WR30X0318, WR30X0320, WR30X0327, WR30X0328, WR30X0329, WR30X10012, WR30X10014, WR30X10044, WR30X10058, WR30X10061, WR30X10082, WR30X10109, WR30X10139, WR30X148, WR30X27952, WR30X28735, WR30X29421, WR30X320, AH1993870, PD00000998, EAP1993870, AP4345120, EA1993870, PS1993870. Compatibility This OE ice maker is compatible with select GE, Hotpoint, and Crosley refrigerators. Example compatible models include (but are not limited to): GE GSS25GSHRCSS, GE GFE29HSDASS, and Hotpoint HSS25IFMDWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OE Replacement – Matches factory specifications for GE refrigerators ❄️ Consistent Ice Production – Produces uniform, clear ice cubes automatically 💰 Affordable Quality – OE construction at a lower price than OEM retail 🛠️ DIY Ready – Simple plug-and-play installation with included wiring harness 🛡️ Fixes Common Issues – Solves no-ice, leaking, or jammed cube problems 📐 Product Specification Part Number: WR30X10093 Component Type: Refrigerator Ice Maker Assembly Material: Durable plastic housing, stainless-steel ejector arm Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for standard household freezer operation Compliance: OE (Original Equipment) quality – same form, fit, and function as OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect refrigerator from power. Remove the ice bin and freezer shelf to access the old ice maker. Unscrew and disconnect the wiring harness from the existing unit. Mount the new XPARTCO WR30X10093 ice maker in position. Connect the harness and secure mounting screws. Restore power and allow 24 hours for full ice production. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 OE-Quality Replacement by XPARTCO 🔄 30-Day Return Policy Enjoy fresh ice again — Add to Cart Now for an OE-quality, factory-fit solution!

Read more less

WR50X10068 Refrigerator Defrost Thermostat – Replacement for GE, Hotpoint, and Kenmore Product Overview This Defrost Thermostat is a replacement part designed for use in select GE refrigerator models. This component acts as a safety device in the refrigerator's defrost system, preventing the freezer from overheating during the defrost cycle. It works by monitoring the temperature of the evaporator coil and turning off the defrost heater when the coil gets warm enough, thus safeguarding the freezer from getting too hot.  Defrost thermostat for refrigerator or freezer L140-30F. 6" long wire, wire connectors not included. Replaces Part Numbers This thermostat replaces WR50X10068, WR50X10015, WR50X10017, WR50X10018, WR50X10028, WR50X10051, WR50X10052, WR50X10053, WR50X10054, WR50X10074, WR50X10075, WR50X10079, L140-30F, AH1017716, EA1017716, AP3884317, PS1017716.  It is designed to match OEM performance and fit in a wide range of GE and GE-built refrigerator models. Compatible Brands Compatible with refrigerators from GE, Hotpoint, and Kenmore models manufactured by GE. Suitable for top-freezer and side-by-side configurations that use a defrost thermostat with this part number. Fixes the Following Issues Frost or ice buildup in freezer Refrigerator not defrosting Poor airflow and cooling performance Defrost cycle not activating Why Buy from Express Parts Direct Cost-effective aftermarket alternative Fast and free shipping across the U.S. Trusted by appliance technicians and DIY users Easy to install and reliable in performance

Read more less