ERP 69W43 Gas Furnace Flame Sensor
Furnace Flame Sensor
3/16 inch Male Terminal Rod Measures 1-7/8 x 1-/12 inches
Designed to fit specific Armstrong, Lennox, Ducane Furnace Models
Replaces Part Numbers:69W43, 69W4301, LB-74940B, LB74940B
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
74005890 Gas Range Spark Electrode Set
Product Title
Aftermarket 74005890 Gas Range Spark Electrode Set - Compatible with Jenn-Air, Whirlpool Ranges, Includes 2 Electrodes, Terminal Block, Wires
Product Description
Ensure consistent burner ignition with the 74005890 Gas Range Spark Electrode Set from Parts-O-Matic. This high-quality aftermarket set replaces the original 74005890, featuring two spark electrodes, a terminal block, and wires for select Jenn-Air and Whirlpool gas ranges. Designed for reliable sparking, it’s ideal for fixing burners that fail to light, spark weakly, or cause continuous clicking. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select Jenn-Air, Whirlpool, and other brand gas range models.
🔥 Reliable Ignition: Includes two ceramic electrodes for consistent sparking to ignite burners efficiently.
💰 Cost-Effective Alternative: Aftermarket set offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Includes terminal block and wires for straightforward replacement; requires a Phillips screwdriver and 10–20 minutes.
🛡️ Fixes Common Issues: Resolves burners not lighting, weak sparks, continuous clicking, or gas smell without ignition.
Compatibility:
Compatible with models including but not limited to:
Jenn-Air: JDS9860AAP, JDS9860ACB, JDS9860ACS, JDS9860ACW, JGR8850ADW
Whirlpool: GW395LEPB, GW395LEPQ, GW395LEPS
Replaces part numbers: WP74005890, 74005890, 74006098, 7432P120-60, 895262, AP6010920, PS11744110, EAP11744110, PD00004364
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Installation Notes:
Tools Needed: Phillips screwdriver, putty knife, needle nose pliers, 1x4 wood piece (to prop range top).
Safety First: Unplug the range and shut off the gas supply before installation.
Steps: Remove burner grates and caps, use a putty knife to release the range top’s spring clips, prop the top with a 1x4 wood piece, unscrew the old electrodes, disconnect the wires from the terminal block, and install the new electrodes and terminal block with included wires. Adjust the electrode tip if sparking is weak (avoid cracking the ceramic). Test burners after reassembly. Installation takes 10–20 minutes.
Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Get your gas range burners lighting perfectly today!
Add to cart now for an affordable fix with free shipping on your entire order!
ERP 74007733 Surface Burner Knob
1/4" stem length,
6 o'clock flat,
0.256
Replaces Part Numbers:WP7733P410-60, 7733P410-60, 74007733, AP6011505, PS11744702, WP7733P410-60VP
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 74010839 Burner Control Knob
1/4" stem length,
10 o'clock flat,
notched Mold#: 5D75
Replaces Part Numbers: WP74010839, 74010839, 7737P372-60, AP6011218, PS11744413, WP74010839VP
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 7432P136-60 Gas Oven Igniter
3.4 - 3.6 Amp,
1.5" block, 3.75" cage w/90° bkt,
7.75" leads w/male spade Replaces both back or broil igniter for specific Amana, Magic Chef, Whirlpool Ranges
Description: This Oven Igniter is a replacement part that guarantees optimal performance for your oven. It is a crucial component that provides the necessary ignition to start the gas flow and ignite the oven burner. This specific igniter is designed for horizontal mounting, ensuring proper positioning and efficient ignition. It is a vital component that helps your oven reach the desired temperature quickly and maintain it throughout the cooking process.
Replaces Part Numbers: WP7432P136-60, 7432P136-60, 1544454, 31991701, 32009801, 74008064, 7432P131-60, AP6011349, PS11744545, WP7432P136-60VP.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
80040 Washer Agitator Dogs – Compatible with Whirlpool, Kenmore, Maytag, Roper, and Crosley Washers
Product Description
Restore your washer’s cleaning performance with the 80040 Washer Agitator Dogs. These Washer Agitator Dog set is a set of 4 replacement parts for select Kenmore, Maytag, roper, Whirlpool washing machine models. These are the little plastic cams that allow the top of your agitator to spin freely in one direction but keep it from spinning in the opposite direction, giving you a "ratcheting" effect. If they are worn out, the top of your agitator will spin freely in both directions and your clothes won't get fully washed.
Replaces Part Numbers
80040, 285612, 285770, 3109, 3366877, 387091, 80040VP, 99989668, AH388034, EA388034, LP338, EAP388034, PD00002340, AP3119063, PS388034, TJ90LP338.
Compatibility
This replacement agitator dog kit fits select Whirlpool, Kenmore, Maytag, Roper, Estate, Crosley, and Amana top-load washers.
Example compatible models include (but are not limited to): Whirlpool WTW4800XQ2, Kenmore 110.82980100, and Maytag MVWC415EW1.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM performance for Whirlpool-brand washers
⚙️ Restores Wash Action – Replaces worn agitator dogs for proper rotation and cleaning power
💪 Durable Nylon Design – Built for long-lasting use under heavy wash loads
🛠️ DIY Friendly – Installs easily with a socket wrench in minutes
🛡️ Fixes Common Issues – Solves slow or non-spinning upper agitator problems
📐 Product Specification
Part Number: 80040
Component Type: Washer Agitator Dogs (Set of 4)
Material: High-strength nylon
Mounting: Fits inside upper agitator cam assembly
Operating Conditions: Designed for top-load washers with dual agitators
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: 7/16-inch socket wrench, flathead screwdriver
⚠️ Safety First: Always unplug the washer before performing repairs to avoid electrical shock.
Steps:
Unplug the washer and remove the fabric softener dispenser and agitator cap.
Use a socket wrench to remove the bolt securing the agitator.
Lift off the upper agitator and remove the old agitator dogs.
Insert four new 80040 agitator dogs into the slots of the cam assembly.
Reassemble the agitator, tighten the bolt, and reinstall the dispenser cap.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🧰 Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore strong wash performance — Add to Cart Now for a reliable, budget-friendly replacement!
807047901 Dishwasher Water Inlet Valve - Compatible with Frigidaire, Electrolux, Crosley, Kenmore
Product Description
Restore your dishwasher’s water flow with the replacement 807047901 Dishwasher Water Inlet Valve. This water inlet valve is designed for select Frigidaire, Electrolux, Crosley, Kenmore, and White-Westinghouse dishwashers, regulating water entry for optimal cleaning performance. It addresses issues like no water filling, slow filling, leaks, or poor cleaning, offering a cost-effective alternative to OEM parts.
Note: Includes one water inlet valve with bracket. Disconnect power and water supply before installation.
Replaces part numbers: 807047901, PD00025455, EAP9865067, WV7901, AP5948913, PS9865067.
Compatibility:
Compatible with models including but not limited to:
Frigidaire: FFCD2413US2A, FGID2466QF5A, FGBD2438PB9B, LFID2426TF0A, LFID2426TF2A, DGBD2438PF1A, FBD2400KB
Crosley: CDW7700LR0
Kenmore: Select models requiring 807047901
Electrolux: Select models requiring 807047901
White-Westinghouse: Select models requiring 807047901
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Frigidaire, Electrolux, Crosley, Kenmore, and White-Westinghouse dishwashers.
🚰 Specifications: Single solenoid valve, 120V, 60Hz, 3.5W, GHT inlet.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, wrench, work gloves; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves no water filling, slow filling, leaks, or poor cleaning performance.
Product Specification
Part Number: 807047901
Component Type: Dishwasher water inlet valve
Material: Plastic and metal
Electrical Specs: 120V, 60Hz.
Mounting: Includes bracket, GHT inlet.
Operating Conditions: Suitable for dishwasher water systems
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source and water supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher cleaning effectively today!
Add to cart now for a budget-friendly fix!
ERP 807387501 Dishwasher Timer
Fits specific Frigidaire Dishwasher Models.
Replaces Part Numbers:807387501, AP5788729, PS8747114.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 808602601 Refrigerator Evaporator Fan Motor
120V, 60 Hz, .1A, 6W,
1-7/8" shaft.
Has quick disconnect.
Replaces Part Numbers: 808602602, 808602601, 241854601, 4931129, AP6893151, PS12729077.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 809006501 Dishwasher Door Bottom Gasket
Replaces Part Numbers:809006501, 154576501, 154759101, 154297601, 154297602, 154297603, 154588201, 3290453, AP5809675, PS9495545
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP 8181694 Washer Water Valve
Two solenoid valve with 50 ohm thermistor.
Fits specific Whirlpool front load machines.
Replaces Part Numbers: WP8181694, 8181694, 906483, WV1694, OEM18035147, AP6011714, PS11744913, WP8181694VP.
Description: This Inlet Valve is a replacement part for specific Maytag, Whirlpool washing machine models. This valve is critical for controlling the flow of water into the washing machine, ensuring that the right amount of water is supplied for various washing cycles. It consists of solenoids that open and close to allow hot and cold water to enter the wash tub at the appropriate times, according to the selected wash settings.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
