ERP DC34-00025E Washer Door Lock Assembly
Replacement for Samsung Washer Door Lock
Replaces Part Numbers: DC34-00025E, DC34-00025A, AP6225255, PS12072637
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP DC47-00015A Dryer Thermostat
Fits Specific Samsung, Whirlpool Dryer models.
non-resettable dryer thermostat.
Description: This Dryer Thermal Fuse is a exact replacement Part that is situated on the heating element housing for specific Samsung, Whirlpool dryer models. It meticulously measures the air temperature within the dryer drum and adjusts the heat to maintain the optimal drying temperature. In situations where your dryer doesn't start, fails to dry clothes effectively, or doesn't produce heat, a faulty thermal fuse might be the cause.
Replaces Part Numbers:DC47-00015A, 2068544, 35001091, 1122484, AH2038382, DC47-00015A, EA2038382, AP4201892, PS4205212, AP4045835, PS2038382.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
ERP DC47-00016A Dryer Thermostat
Fits Specific Samsung Dryer Models
Description: As part of the blower housing unit, the thermal fuse is responsible for monitoring the temperature inside the dryer. It will cut off power if it begins to overheat. This ensures the safety of your home and prevents potential fires or damage to your clothes. If your dryer is not starting or the fuse is overheating, it may be time to replace this essential part. Before installing the new thermal fuse, remember to disconnect the dryer from the power source.
Replaces Part Numbers: DC47-00016A, AP4201894, PS4205213.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
ERP DC47-00017A Dryer High Limit Thermostat
Replaces Part Numbers:
W10908281, AP6034266, 35001192, PS11766749, DC47-00017A, AP4201896, PS4205216
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP DC47-00019A Dryer Heating Element - Compatible with Samsung, Kenmore
Product Description
Restore efficient drying with the replacement DC47-00019A Dryer Heating Element. This replacement heating element is designed for select Samsung and Kenmore electric dryers, providing consistent heat (5300W, 240V) to dry clothes effectively. It addresses issues like no heat, insufficient heat, or prolonged drying times, offering a cost-effective alternative to OEM parts.
Note: Includes one heating element with coiled design. Disconnect power before installation. Check dryer venting and related components for optimal performance.
Replaces part numbers: DC47-00019A, 2068550, AP4201899, PS4205218, TJDC47-00019A, WP35001247, 35001247, 1185561, PD00002996, EAP11741835, AP6008695, PS11741835, WP35001247VP.
Compatibility:
Compatible with models including but not limited to:
Samsung: DV42H5000EW/A3, DV42H5200EP/A3, DV45H7000EW/A2, DV40J3000EW/A2, DV209AEW/XAA, DV328AEW/XAA
Kenmore: 402.89032010, 402.89032011
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung and Kenmore electric dryers.
🔥 Specifications: replacement heating element, 5300W, 240V.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves no heat, insufficient heat, or prolonged drying times.
Product Specification
Part Number: DC47-00019A
Component Type: Dryer heating element
Material: Metal (nickel-chromium alloy coil)
Electrical Specs: 5300W, 240V.
Mounting: Screw-mounted in dryer heater housing
Operating Conditions: Suitable for high-heat dryer environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer performing optimally today!
Add to cart now for a budget-friendly fix!
ERP DC47-00022A Dryer igniter
3.4 - 3.6 Amps,
2" wide block.
Fits select Samsung and Whirlpool dryers.
Replaces Part Numbers: DC47-00022A, 2068552, AP4211272, PS4205220, WP33002789, 33002789, 1002853, 35001100, DC47-00022A, PS11741122, AP6007994.
Description: The Dryer Heater Igniter is an essential component for maintaining the optimal performance of your dryer. This replacement part is specifically designed for select Whirlpool, Maytag, Samsung dryer models, ensuring a perfect fit and reliable operation. The Dryer Heater Igniter efficiently ignites the heating element, providing consistent and even heat distribution for thorough drying cycles.
This is an aftermarket part that can be used as a replacement for the OEM part.
DC62-00214M Washer Water Valve
Replaces Part Numbers:DC62-00214M, 2979589, AP5623062, PS4208704
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DC62-00223A Washer Center Tub Seal – Replacement for Samsung Washers
Product Overview
The Center Tub Seal is a replacement part compatible with Samsung washers. This seal is located on the center tub assembly and provides a watertight barrier between the inner and outer tubs. It prevents water from leaking out during the wash cycle.
Fits Specific Samsung Washer Models.
Replaces Part Numbers
This seal replaces DC62-00223A, AP4211943, PS4208713.
Designed to match the original dimensions and performance of the factory part.
Compatible Brands
Compatible with Samsung front-load washer models, Fits various models that require a shaft-to-tub seal of this type.
Fixes the Following Issues
Water leaking from under the washer
Noisy spin cycle due to worn seal
Mold or mildew forming near tub bearing
Internal water damage from leaking shaft area
Why Buy from Parts‑O‑Matic
Reliable aftermarket quality
Fast and free U.S. shipping
Helps extend washer lifespan and prevent damage
Trusted by repair professionals and homeowners
ERP DC62-30312J Washer Water Inlet Valve (Cold Side)
Cold water inlet valve
Cross Reference No: DC62-30312J, 2070376, DC62-30312H, AP4204532, PS4209090, AP4204464, WV0312J, WV1151, WP34001151, 34001151, 1067883, DC62-30312H, AP6008403, PS11741539.
Description: This Water Inlet Valve is a replacement part for specific Samsung, Whirlpool washing machine models. It controls the flow of water into the washer during the fill cycles. This valve is essential for ensuring that the washing machine receives the correct amount of water at the right time for washing and rinsing clothes. Causes of a bad water inlet valve can include mineral buildup from hard water, electrical issues, or wear and tear from regular use. A malfunctioning valve can lead to improper water flow, which can affect the washing machine’s performance.
This is an aftermarket part that can be used as a replacement for the OEM part.
ERP DC62-30314K Washer Water Valve
Hot side water valve.
Fits Specific Samsung and Kenmore washer Models.
Cross Reference No:DC62-30314K, 1810145, DC62-30314H, WV0314K, AP4204535, PS4209100
Description: This Washer Water Inlet Valve is essential for maintaining a steady and reliable water supply to your Samsung washing machine. This replacement part ensures compatibility with a wide range of Samsung washer models, providing a perfect fit and seamless integration. Crafted from high-quality materials, the valve effectively controls the water flow, preventing leaks and ensuring that your washer operates efficiently during each cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP DC64-00828A Dryer Door Switch
Replaces Part Numbers:DC64-00828A, AP4205736, PS4210964, DC64-00828A, WP35001125, 35001125, AP6008683, PS11741823
This is an aftermarket part that can be used as a replacement for the OEM part.
WARNING: California’s Proposition 65 (California Residents Only)
ERP DC66-00343A Washer Shock Absorber
Fits Specific Samsung, Maytag Front Load Washer Models.
The Shock Absorber is an integral Replacement Part designed for use in washer-dryer combos. This part is primarily responsible for absorbing the vibrations of the outer washer tub. It thereby promotes smooth and quiet operation. With an off-white body, it is designed to blend seamlessly with the appliance. Prior to installation, it's critical to unplug the washer-dryer combo to ensure safety.
Replaces Part Numbers:DC66-00343A, 2072263, AP4206413, PS4212140, WP34001292, 34001292, AP6008424, PS11741561, WP34001292, 34001292, AP6008424, PS11741561.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
