ER W10820036 Dryer / Washer Door Switch
This Switch can be used in Dryer Door Switch and Washer Lid Switch for Specific Models.
Replaces Part Numbers:W10820036, 279347, 2-2770, 2-50062, 2-5415, 2020, 202770, 233480, 235462, 237194, 238775, 238980, 239868, 24198, 247207, 250062, 26000279347, 279290, 287219, 287220, 291679, 291697, 292212, 296141, 296144, 3347287, 338883, 3392266, 3397503, 3399991, 347207, 350526, 359230, 359484, 364090, 364091, 367034, 388322, 389105, 4319330, 687429, 75958, 8224, 83333, 84144, 86628, 89556, 99788, 99838, LP210, AP5985146, PS11723153, W10820036VP.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10820048 Washer Suspension Rod Kit
Features:
Shock absorbing suspension rod supports the tub and keeps it stable.
Used on top loading washers.
For even wear, the manufacturer recommends replacing all damper rods on your unit at the same time.
Includes (4) Suspension Rod Assemblies, (4) Ball Cups, (4) Bushings.
Replace Part Numbers:W10820048, W10189077, 280144, 4283301, 8564009, 8566146, OEM17955344, AP5985113, PS11723157, W10820048VP.
Description: This suspension rod kit is a replacement part for use in washing machines. The kit reduces the movement of the tub during the spinning cycle. These rods provide a cushion to the drum to prevent excessive vibrating. Over time, the tension placed on the rods will cause them to stretch and possibly break. Broken or stretched rods will cause the machine to make a loud knocking noise during the spin cycle. This noise is the tub hitting the drum as it spins since there is not a cushion to prevent the banging. The drum of the washing machine will also look unbalanced if a rod is broken or stretched. Unplug the washing machine from the electrical outlet and pull it away from the wall to have room to work. Remove the front and top panels and locate the tension rod. Lift the tub to remove the tension from the damaged rod and remove the connection to the rod. Pull the damaged rod out and install the new rod assembly. Reassemble the washing machine. Plug the machine back into the electrical outlet and push the machine back into place. This suspension kit contains four each suspension rods, bushings, and suspension balls. It is designed for use in washing machines manufactured by Kenmore, Whirlpool, and Maytag.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10822553 Washer Shock Absorber
Replaces Part Numbers: W10822553, 8182812, W10015830, 4273183, W10261477, W10822553VP, AP5985209, PS11723173.
Description: This Shock Absorber is a replacement part select Maytag, Kenmore, Whirlpool washing machine models. This part helps to dampen the motion of the tub during the spin cycle, reducing vibrations and noise. By absorbing the energy produced during operation, the shock absorber contributes to the stability and longevity of the machine. A well-functioning set of shock absorbers is essential for maintaining the washer's performance and preventing damage to other components.
This is an aftermarket part that can be used as a replacement for the OEM part.
ERP WR60X10277 Refrigerator Evaporator Fan Motor
Replaces Part Numbers: W10822580, W10255195, 2259385, AP5985210, PS11723174.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10822681 Refrigerator Water Inlet Valve
Note: Some models, there is a separate water connector from this valve. Order part# WPW10445062 for that connector.
Replaces Part Numbers:W10822681, W10408180, 2188623, 2188709, 2212374, 2304834, 4255027, 4389178, AP5985115, PS11723179.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10837240 Dryer Idler Pulley
Replaces Part Numbers:W10837240, W10547287, W10547290, 3387372, 3388674, W10118754, W10118756, W10837240VP, AP5988716, PS11726337, 279640, AP3094197, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PS334244, .
Description: This Idler Pulley Assembly is a replacement part compatible with specific Whirlpool dryer models. It is a crucial component of the dryer's drive system, responsible for maintaining proper tension and alignment of the belt that drives the dryer drum, this idler pulley assembly typically consists of a pulley mounted on a bracket or arm, which can pivot or move to apply the necessary tension to the belt.
This is an aftermarket part that can be used as a replacement for the OEM part.
ERP W10846093 Dishwasher Circulation Pump
120VAC, 60 Hz,
1.2A, 60W,
30 min ON 30 min OFF
Replaces Part Numbers:W10846093, W10610147, OEM17966648, AP5988881, PS11728093
Description: This is a replacement circulation pump compatible with specific Maytag, Kenmore, Whirlpool dishwasher models. This part is intended to replace a broken, faulty, or clogged circulation pump in a variety of dishwashers. The circulation pump transfers water to the spray arms so dishes can be cleaned. If the pump is defective or becomes clogged over time, dishes may not come out clean or the dishwasher may leak. Proper tools are required to install this part.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10853723 Washer Water Valve
Fits Specific Whirlpool, Maytag, Kenmore Washer Models.
Replaces Part Number W10853723, W10326913, W10326915, W10342320, WPW10326913, WPW10326915, 4378158, OEM17969282, AP5989759, PS11731257, W10853723VP.
Description: This water inlet valve is a replacement part for specific Whirlpool washing machine models. It replaces a faulty or damaged original inlet valve. The valve attaches water lines to the appliance and opens/closes solenoids to control water flow. Issues like no fill, constant filling, leaks, and no hot/cold water point to a bad inlet valve. This part is compatible with select Whirlpool brand models including Kenmore and Maytag.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10857622 Range Dual Surface Infinite Switch
240V, 15A for large ceramic element.
Fits Specific Whirlpool range Models.
Replaces Part Numbers: W10857622, W10437092, AP5989899, 4383881, PS11731368.
Description: This Surface Infinite Switch is a replacement part compatible with specific Whirlpool ranges. It contains internal switches that control cooking functions and safety features. Common causes of a bad switch set can be related to prolonged high-heat exposure, moisture, or accidental impact damage. Over many uses, normal component wear also occurs.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10860916 Range Spark Module (Board)
Replaces Part Numbers: W10860916, AP5999387, PS11731566, W10457998.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP W10861225 Dryer Door Handle
Color: Platinum (light grey)
This Dryer Door Handle is a replacement part compatible with Whirlpool dryers. The Dryer Door Handle is responsible for allowing the user to open and close the dryer door. The dryer door handle works by providing a secure and comfortable grip for the user to open and close the dryer door. This handle is white in color and installs by simply snapping into place.
Replaces Part Numbers: W10861225, 4380739, W10714516, W10861225VP, AP5999398, PS11731583.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
