Choice WPW10271610 Washer Water Level Pressure Switch
120V four spade connector pressure switch.
Fits Whirlpool front load washer.
Replaces Part Numbers: WPW10271610, W10271610, AP6018237, PS11751539.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Choice WR23X29161 Refrigerator Door Switch – Replacement for GE and Hotpoint Refrigerators
Product Overview
This Door Light Switch is a replacement part for specific GE refrigerator models. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed. Common causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.
125/250VAC, 1/3 HP fan, light switch with a clear plunger.
Fits Specific GE french door refrigerator models.
Replaces Part Numbers
This switch replaces WR23X29161, WR23X29162, AP6328772, PS12295821.
Designed to match OEM performance and fit.
Compatible Brands
Compatible with GE, Hotpoint, and Kenmore refrigerators manufactured by GE. Fits a variety of top-freezer, bottom-freezer, and side-by-side models.
Fixes the Following Issues
Refrigerator light not turning on or off properly
Fan not turning off when door is open
Interior light stuck on and overheating compartment
Control board not receiving door status signal
Why Buy from Parts‑O‑Matic
Cost-effective aftermarket solution
Fast and free U.S. shipping
Easy installation – plug-and-play replacement
Trusted by appliance repair technicians and homeowners
WR50X10070 Refrigerator Defrost Thermostat – Replacement for GE, Hotpoint
Product Overview
This Defrost Thermostat is a replacement part designed for use in select GE refrigerator models. This component acts as a safety device in the refrigerator's defrost system, preventing the freezer from overheating during the defrost cycle. It works by monitoring the temperature of the evaporator coil and turning off the defrost heater when the coil gets warm enough, thus safeguarding the freezer from getting too hot.
Fits GE 18 CF refrigerators.
Tube mount,
37TV31 series, L58-30F.
Replaces Part Numbers
This thermostat replaces WR50X10070, WR50X10077, AH1155319, EA1155319, AP3884318, PS1155319.
It is designed to match the performance and dimensions of the original part.
Compatible Brands
Compatible with GE, Hotpoint, and Kenmore refrigerators manufactured by GE. Fits various top-freezer and side-by-side models that use this defrost thermostat.
Fixes the Following Issues
Refrigerator or freezer not defrosting
Ice or frost buildup around evaporator coils
Inconsistent or warm fridge temperature
Poor airflow due to frozen components
Why Buy from Parts‑O‑Matic
Affordable and reliable aftermarket solution
Fast and free shipping across the U.S.
Easy installation with plug-and-play compatibility
Trusted by DIYers and professional technicians
Choice Y54414 Dryer Idler Pulley - Compatible with Admiral, Crosley, Maytag, Speed Queen Dryers
Product Description
Keep your dryer running smoothly with the replacement Y54414 Dryer Idler Pulley from Parts-O-Matic. This high-quality aftermarket idler pulley replaces the Whirlpool Y54414, designed for select Admiral, Crosley, Maytag, and Speed Queen dryer models. It maintains proper tension on the drive belt to ensure the dryer drum spins effectively, fixing issues like noisy operation, failure to tumble, or the dryer not starting. Constructed from durable plastic and metal with a satin finish, this pulley measures 2-3/16" in diameter and 3/4" in width. Enjoy fast and free shipping on all orders at Parts-O-Matic! Note: Washers and retaining clips may not be included; reuse existing ones if in good condition. Inspect the idler arm for wear and consider replacing it if damaged.
Replaces part numbers: WPY54414, Y54414, 14218926, 54414, R0609504, WPY54414VP, 54414-REPL, R0609504-REPL, AP6024203, PS11757553, D510142P, 510142P, 510142, D510142, 510142P, 510142, 54414, 54415, 54415P, AP6329060, PS17001032, DE407, 54414-2, 1246423, AP6024203, EAP11757553, PD00002420, PS11757553, 510142P, 510142, D510142P, AP4291235, PS2200898
Compatibility:
Compatible with models including but not limited to:
Admiral: AE series (e.g., AE3213, AE3413, AE4113)
Crosley: CDE series
Maytag: SDG3606AWW, SDG4606AWW, MDET336AYW, SDG405DAWW
Speed Queen: AEE933, AEE953, AEM197, AEM333, AEM353, AEM377, AEM397, AEM407L, AEM427W
Amana: ALG866SBW, LEA60AL
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Admiral, Crosley, Maytag, and Speed Queen dryer models.
🔥 Specifications: Idler pulley with 2-3/16" diameter x 3/4" width, made of plastic and metal with a satin finish, includes metallic bearing for smooth operation.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a Phillips screwdriver, snap ring pliers, and basic tools; typically installed in 15–30 minutes. Washers and retaining clips may not be included.
🛡️ Reliable Fixes: Resolves issues like noisy operation, drum not spinning, or dryer not starting.
Installation Notes:
Tools Needed: Phillips screwdriver, snap ring pliers, flathead screwdriver, work gloves.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
Handle with Care: Inspect the idler arm shaft for wear; lubricate with powdered graphite or light machine oil for smoother operation.
Installation Steps: Access the idler pulley by removing the dryer’s front panel and drum (consult your model’s manual for specific screws). Remove the old pulley by releasing the snap ring, washer, and belt. Clean the idler arm shaft, then install the new pulley with existing or new washer, pulley, second washer, and snap ring. Rethread the belt around the pulley and motor pulley (check your model’s belt routing diagram). Reassemble in reverse order. Note: Snap ring pliers are recommended for easy removal and installation. If the idler arm is worn, consider replacing the entire assembly.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your dryer back to quiet, efficient performance today!
CIM15 Ice Maker (Copper) 15 Feet Copper Tubing and Self Tapping Saddle Valve
Includes 15' 1/4" copper tubing, self tapping saddle valve and compression fitting.
Low lead valve and fittings.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CM30K10003 Range 8" Surface Element
Surface Element 8"
2100W 240V,
8", 4 turn,
2100W.
Fits GE Range.
Replaces Part Numbers:WB30K10003, AH243824, EA243824, AP2027742, PS243824.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CM30M1 6" Range Surface Element
Product Title
CM30M1 6" Range Surface Element - Compatible with specific GE, Hotpoint Electric Ranges
Product Description
Bring your electric range back to peak performance with the CM30M1 6" Range Surface Element from Parts-O-Matic. This high-quality aftermarket burner element replaces the original S30M1, delivering 1000–1325 watts at 240V with a 5-turn coil design for efficient and even heating. Perfect for select GE, Hotpoint, and other brand electric ranges, it fixes issues like uneven heating, slow warm-up, or non-functional burners. Enjoy free shipping on all orders at Parts-O-Matic!
Key Features:
✅ Broad Compatibility: Fits select GE, Hotpoint and other electric range models.
🔥 Efficient Heating: 994W @ 208V, 1325W @ 240V, 6" -5 turn for consistent, even cooking.
💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Plug-in design with Y-style bracket; requires no tools and takes 5–10 minutes to install.
🛡️ Fixes Common Issues: Resolves uneven heating, slow warm-up, or burners that fail to heat.
Compatibility:
Replaces part numbers: WB30M1, 2912, 340523, AH243867, AP2634727, CH30M1, EA243867, PS243867, WB30M0001, WB30X5071, WB30X5109, WB30X5119, WB30X5121, WB30X5129, YCH30M1, B004JNU22A
Verify compatibility with your appliance brand and model number, please contact Parts-O-Matic support for assistance.
Installation Notes:
Tools Needed: None for standard installation; a flathead screwdriver may help for stubborn connections.
Safety First: Unplug the range before installation to avoid electrical shock.
Steps: Remove the old burner element by gently pulling it from the receptacle, align the Y-style bracket of the new S30M1 element, and plug it into the socket. Ensure the element sits flat in the drip pan. If the burner is not level, adjust the connection bolts to ensure they are parallel and push down gently. Installation takes 5–10 minutes. Note: A slight burning smell during first use is normal due to a protective coating; this will dissipate after 15–20 minutes.
Download our installation guide or watch our YouTube tutorial for step-by-step instructions.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders and a 30-day return policy. Restore your range’s cooking performance today!
Add to cart now for an affordable fix with free shipping on your entire order!
CM30M2 Range 8" Surface Element
Surface Element 8"
2350W 208/240V,
8", 6 turn,
1765/2350W.
Fits GE Range.
Replaces Part NumbersWB30M2, WB30K5027, WB30M0002, WB30X5072, WB30X5120, WB30X5122, WB30X5130, AH243868, EA243868, AP2634728, PS243868.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CM30T10074 Range 8" Surface Element
Surface Element 8"
2350W 208/240V,
8", 5 turn,
1763/2350W.
Fits GE Range.
Replaces Part Numbers:WB30T10074, WB30T10033, AH243922, EA243922, AP3186376, PS243922.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CM30X24401 Range 6" Surface Element
Surface Element 6"
1325W 208/240V,
6", 4 turn,
994/1325W.
Fits GE Range.
Replaces Part Numbers:WB30X24401, WB30T10078, WB30X20479, WB30X24408, WB30T10027, WB30T10111, AP5983743, PS11721464.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CMP 03340 Universal four-outlet battery powered push button Igniter
1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
Used on Aman, Brinkmann, Centro, Charbroil, Charmglow, Kenmore and many more.
Replaces Part Numbers:03340, 3340, IGEIB4B, MCM03340, MCM040334003
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
CMP 119-4400-5 Universal Five-outlet battery powered push button Igniter
If you replaced the battery and your grill still will not start, you probably need a new igniter. So, check out this 5 port BBQ Igniter! This aftermarket electronic igniter module fits many Brinkmann, Charmglow, and Uniflame gas grills.
Fits many Brinkmann, Charmglow, and Uniflame gas grills
Safely ignites burners
Quality construction
Easy installation
5 port
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
