XPARTCO DC97-16782A Dryer Drum Roller
The XPARTCO DC97-16782A is an aftermarket replacement drum support roller compatible with select Samsung and Kenmore dryers. The drum roller is a rear support wheel that cradles the dryer drum and allows it to rotate smoothly during every drying cycle. Over time, the rollers wear down, causing the drum to wobble, squeak, or thump during operation — replacing them restores quiet, stable drum rotation.
This roller features a self-lubricating bushing and includes the roller shaft and mounting tri-ring clips for a complete, ready-to-install assembly. It measures approximately 3-1/4 inches in diameter and directly replaces OEM part numbers DC97-16782A, DC97-07523A, and DC97-07523B. Sold individually — most Samsung dryers use two rear drum rollers, so we recommend replacing both at the same time. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DC97-16782A Dryer Drum Roller fixes squeaking, thumping, or rumbling noises coming from Samsung and Kenmore dryers during operation. The drum roller supports the rear of the dryer drum — when worn, it causes noise and uneven drum rotation. Includes roller shaft and mounting clips. Approximately 3-1/4" diameter. Compatible with select Samsung and Kenmore dryers.
Common Problems This Part Fixes
Loud squeaking, thumping, or rumbling noise during dryer operation
Drum wobbling or vibrating excessively during the drying cycle
Grinding or scraping sound as the drum rotates
Dryer making noise that gets worse over time
Visible flat spots, cracks, or worn surfaces on existing drum rollers
Drum not rotating smoothly or spinning unevenly
Replaces Part Numbers
This drum roller directly replaces the following OEM and cross-reference part numbers:
DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PD00002021, EAP4221885, AP5325135, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, ASM930889, PD00003650, EAP11749648, AP6016361, PS11749648.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select dryers from the following brands:
Samsung dryers (gas and electric — DV2, DV3, DV4, DV5, DVE, DVG series)
Kenmore / Sears dryers (select models built on Samsung platform)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Supports the rear of the dryer drum for smooth, stable, quiet rotation during every cycle
Approximately 3-1/4" diameter — direct replacement for OEM DC97-16782A, DC97-07523A, and DC97-07523B
Self-lubricating bushing — no additional grease or oil required after installation
Complete assembly includes roller shaft and mounting tri-ring clips — everything needed for installation
Durable rubber and metal construction — resists wear, cracking, and heat damage
Aftermarket replacement built to OEM-equivalent quality standards
Often replaced together with the drum belt (6602-001655) and idler pulley (DC93-00634A) for a complete drum drive repair
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
DC97-16782A
Part Type
Dryer Drum Support Roller
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Diameter
Approximately 3-1/4 inches
Dimensions
3" L x 2-1/2" W x 3" H
Material
Rubber / Plastic / Metal
Lubrication
Self-lubricating bushing (no grease needed)
Includes
Roller, shaft, and mounting tri-ring clips
Sold As
Single roller (most dryers require 2 — replace both)
Compatible Brands
Samsung, Kenmore
Often Replaced With
6602-001655 Drum Belt, DC93-00634A Idler Pulley
Installation Notes
⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum rollers, remove the top panel and front panel of the dryer, then release the drum belt tension at the idler pulley and lift the drum out of the cabinet. The two rear drum rollers are located on the rear bulkhead. Remove the mounting clip, slide the old roller off the shaft, and install the new DC97-16782A roller — the shaft thread is clockwise. Reinstall the mounting clip to secure the roller. Replace both rear rollers at the same time even if only one appears worn. Reassemble the dryer, restore power, and run a test cycle. Tip: While the drum is out, inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.
Frequently Asked Questions
How many drum rollers does my Samsung dryer need?
Most Samsung dryers have two rear drum support rollers. This listing is for a single roller. We strongly recommend replacing both rollers at the same time — even if only one appears damaged — since they wear at the same rate and replacing both prevents the need to disassemble the dryer again soon after.
What does the drum roller do?
The drum rollers are support wheels mounted on the rear bulkhead of the dryer. They cradle the back edge of the dryer drum and allow it to spin smoothly during operation. When the rollers wear down or develop flat spots, the drum wobbles and creates loud squeaking, thumping, or grinding noises.
Does DC97-16782A replace DC97-07523A and DC97-07523B?
Yes. The DC97-16782A is the updated part number that directly supersedes both DC97-07523A and DC97-07523B. If your dryer originally used either of those older part numbers, the DC97-16782A is the correct current replacement.
Should I also replace the drum belt and idler pulley at the same time?
Yes — since the dryer is already fully disassembled to replace the rollers, it is highly recommended to also inspect and replace the drum belt (6602-001655) and idler pulley (DC93-00634A) at the same time. These three parts wear together and are commonly sold as a dryer repair kit, saving you from having to take the dryer apart again in the near future.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from durable rubber, plastic, and metal to match the dimensions and performance of the original DC97-16782A roller.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Read more less
