Gas Oven Igniters

XPARTCO WB13K21 Oven Flat Igniter with Harness - Compatible with GE, Hotpoint, Kenmore Ranges Product Description Revive your gas oven’s performance with the WB13K21 Oven Flat Igniter with Harness from Parts-O-Matic. This high-quality aftermarket flat-style igniter replaces the GE WB13K21, designed for select GE, Hotpoint, and Kenmore gas ranges with hot surface ignition systems. Featuring an 8-inch lead wire, a 1.5-inch ceramic block, and a male/female two-pin quick disconnect, it draws 3.4–3.6 amps to open the oven safety valve and ignite the gas burner. It’s a cost-effective solution for ovens that won’t start, heat unevenly, or emit a gas smell without igniting. Handle with care to avoid damaging the fragile silicon carbide element. Enjoy fast and free shipping on all orders at Parts-O-Matic! Replaces part numbers: WB13K21, 2494, AH231280, EA231280, WB13K0012, WB13K0013, WB13K0014, WB13K10009, WB13K10026, WB13K12, WB13K13, WB13K14, AP2020569, PS231280, IG21. Compatibility: Compatible with models including but not limited to: GE: JGBP24, JGBP28, JGBP30, JGBP35, RGB745, RGB746, JGBS23 series Hotpoint: RGB745, RGB790 series Kenmore: 362.710, 362.720, 362.730 series Verify your model number or contact Parts-O-Matic support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and Kenmore gas range models. 🔥 Specifications: Flat-style Norton igniter with 8" lead wire, 1.5" ceramic block, male/female two-pin quick disconnect, draws 3.4–3.6 amps for reliable ignition. 💰 Cost-Effective Alternative: This Replacement part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Includes harness with male/female two-pin quick disconnect; requires a Phillips screwdriver, socket set, and wire splicing tools; typically installed in 15–20 minutes. 🛡️ Reliable Fixes: Resolves common issues like no ignition, uneven heating, gas smell, or oven not starting. Installation Notes: Tools Needed: Phillips screwdriver, small socket set or nut driver, needle-nose pliers, wire splicing tool. Safety First: Disconnect power and shut off the gas valve before installation. Handle with Care: Avoid touching the silicon carbide element with bare hands, as oils can shorten the igniter’s lifespan. Installation Steps: Remove oven racks and bottom panel (2 screws at rear). Unplug the igniter from the wire harness (accessible via the rear panel or drawer area). Remove the igniter (2 screws), pulling wires through. If the connector doesn’t match, cut and splice wires using ceramic wire nuts (not included). Install the new igniter, reassemble, and tuck excess wires near the gas safety valve to avoid heat exposure. Note: Some users report fused screws; a Dremel tool may be needed to cut them. Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your gas range back to perfect performance today! Add to cart now for a budget-friendly fix with fast and free shipping on your entire order!

Read more less

XPARTCO MEE61841401 Gas Oven Igniter The XPARTCO MEE61841401 is an aftermarket replacement oven burner igniter compatible with select LG and Kenmore gas ranges in the LDG, LRG, LSG, LSS, LTG, and LSR series. The igniter is a flat glow bar hot surface igniter made from silicon carbide that draws electrical current through the oven safety valve to open it, then heats to ignition temperature to light the gas burner. When the igniter weakens or fails, the oven will not heat, will take too long to preheat, or the igniter will glow without ever lighting the burner. This igniter draws 3.3–3.8 amps at 120V AC and reaches operating temperatures of 1,800°F–3,100°F within approximately 60 seconds. The igniter body measures 3-1/2 inches long x 1-3/4 inches wide x 7/8 inches high, with a lead/plug assembly extending approximately 10-3/4 inches from the igniter. It includes a 2-wire harness/plug, mounting bracket, and 2 porcelain wire connectors to accommodate direct plug-in or spliced installation. Directly replaces OEM part numbers MEE61841401, MEE61841403, and MEE63084901. Quick Answer The XPARTCO MEE61841401 Gas Oven Igniter fixes LG and Kenmore gas ovens that won't heat, take too long to preheat, display error codes F9 or F11, or have an igniter that glows but never lights the burner. Flat glow bar style, silicon carbide. Draws 3.3–3.8A at 120V. Igniter body 3-1/2" L x 1-3/4" W x 7/8" H with 10-3/4" lead. Includes bracket and 2 porcelain wire connectors. Replaces MEE61841403 and MEE63084901. Common Problems This Part Fixes Oven not heating at all — gas is not igniting Oven takes excessively long to preheat Igniter glows orange or red but never lights the gas burner Error codes F9 or F11 displayed on LG gas ranges Gas smell when oven is turned on but burner does not light Oven heats inconsistently or shuts off mid-cycle Igniter burned out or visibly cracked or broken Replaces Part Numbers This oven igniter directly replaces the following OEM and cross-reference part numbers: MEE61841401, MEE63084901, 1599783, MEE61841403, EAP3535362, ALG1385007, PD00001851, 095225468650, AH3535362, EA3535362, AP5214765, PS3535362. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This igniter is compatible with select gas ranges from the following brands and series: LG gas ranges — LRG series (freestanding) LG gas ranges — LDG series (freestanding) LG gas ranges — LSG series (slide-in) LG gas ranges — LSS series LG gas ranges — LTG series LG gas ranges — LSR series Kenmore / Sears gas ranges (select LG-built models) Compatible with both single and double oven models. Always verify your model number before ordering. Contact our support team if you're unsure. Key Features Flat glow bar hot surface igniter — draws current through the oven safety valve to open it, then ignites the gas burner Silicon carbide construction — superior heat resistance, high melting point, corrosion and oxidation resistant Draws 3.3–3.8 amps at 120V AC — correct amperage range to open the LG gas safety valve Operating temperature: 1,800°F – 3,100°F with approximately 60-second heat-up time Igniter body: 3-1/2" L x 1-3/4" W x 7/8" H; lead/plug assembly: approximately 10-3/4" from igniter body Plug-in installation — includes 2-wire harness/plug, mounting bracket, and 2 porcelain wire connectors for splicing if needed Compatible with single and double oven models Directly replaces MEE61841401, MEE61841403, and MEE63084901 — no modification required in most cases Resolves error codes F9 and F11 on compatible LG gas ranges Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 10–20 minutes with basic hand tools Product Specifications Part Number MEE61841401 Also Replaces MEE61841403, MEE63084901 Part Type Gas Oven Burner Igniter (Flat Glow Bar Hot Surface Igniter) Condition Aftermarket Replacement Application Gas Ranges and Ovens (single and double oven) Igniter Style Flat glow bar, cageless Material Silicon Carbide / Metal / Ceramic / Porcelain / Plastic Colors White / Black / Gray Amperage Draw 3.3 – 3.8 Amps Voltage 120V AC Operating Temperature 1,800°F – 3,100°F Heat-Up Time Approximately 60 seconds Igniter Body Dimensions 3-1/2" L x 1-3/4" W x 7/8" H Lead / Plug Length Approximately 10-3/4 inches from igniter body Includes Igniter, mounting bracket, 2-wire harness/plug, 2 porcelain wire connectors Error Codes Resolved F9, F11 Compatible Brands LG, Kenmore Installation Notes ⚠️ Gas Appliance Safety Warning This part is used in gas ranges. Working with gas appliances carries risk of gas leaks, fire, and explosion if installed incorrectly. Always shut off the gas supply at the shutoff valve and unplug the range before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. If you are not confident working on gas appliances, have this part installed by a qualified appliance technician. ⚠️ Handle With Care — Fragile Igniter Element The silicon carbide igniter element is extremely fragile and sensitive to contamination. Do not touch the ceramic bar with bare hands under any circumstances — oils from skin will damage the element and significantly shorten its lifespan. Handle only by the bracket, wires, and plug. To install: unplug the range and shut off the gas. Remove the oven racks and oven bottom panel. Disconnect the old igniter's wire connector. Secure the new MEE61841401 igniter to the burner bracket with the mounting screws. If the plug is a direct match to your range's harness, plug it in. If not, cut the wires and use the included porcelain wire connectors to splice the new igniter to the existing wiring. Reinstall the oven bottom panel, restore gas supply and power, and run a test cycle. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions What is the difference between MEE61841401, MEE61841403, and MEE63084901? These are all part numbers for the same LG flat glow bar oven igniter used across different model ranges and production runs. MEE63084901 is the earlier part number; MEE61841401 and MEE61841403 are updated versions. All three are interchangeable, and this aftermarket replacement is compatible with all of them. How do I know if my oven igniter needs to be replaced? The most common signs are the oven not heating at all, taking much longer than normal to preheat, or the igniter glowing orange but never lighting the gas burner. A healthy igniter glows bright orange and ignites the burner within about 60 seconds. If it glows dimly or stays on indefinitely without the burner lighting, the igniter has weakened and is no longer drawing enough current to open the gas safety valve. Error codes F9 or F11 on LG ranges can also indicate a failed igniter. Do I need to splice the wires or does it plug straight in? This igniter includes a 2-wire harness/plug for direct plug-in installation on most compatible LG models. If the connector does not match your range's existing harness, cut the old connector off and use the 2 porcelain wire connectors included in the kit to splice the new igniter to the existing wiring. Do not use standard plastic wire nuts — only porcelain connectors should be used near the oven burner due to the high heat involved. What do error codes F9 and F11 mean on an LG range? On compatible LG gas ranges, error code F9 typically indicates an oven heating failure, and F11 can indicate a shorted or failed igniter circuit. Both codes can be triggered by a weak or failed oven igniter. Replacing the MEE61841401 igniter resolves these error codes in many cases — though other causes such as a failed gas safety valve or control board issue should also be ruled out if the problem persists after replacement. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from silicon carbide, metal, ceramic, and porcelain to match the electrical specifications and physical dimensions of the original MEE61841401 igniter. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

316489403 Gas Oven Igniter 3.2 - 3.6 amp, Fits specific Electrolux, Frigidaire gas oven models. Replaces Part Numbers:316489403, 5304508786, 7316489403, AH2364063, EA2364063, AP4433236, PS2364063.  Description: This Oven Igniter is a replacement part for select Frigidaire gas oven models, designed to ignite the gas in the oven burner to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 5304534663 Gas Oven Bake Igniter Product Overview The XPARTCO 5304534663 Gas Oven Bake Igniter is designed to ignite the gas burner and ensure consistent oven heating performance. This Flat Style Oven Igniter Kit is a high-quality replacement part for specific Electrolux, Frigidaire gas ranges and wall oven models. It functions to ignite the gas to light the oven burner. This does not replace round igniters, or igniters with blue ceramic.  When you turn on the oven, the igniter is activated, and it starts to glow hot. As it heats up, it ignites the gas that is released from the oven's burner. This process continues until the oven reaches the desired temperature. Quick Answer If your gas oven is not heating, takes a long time to preheat, or the burner does not ignite, the 5304534663 bake igniter may be weak or faulty. Replacing it restores proper ignition and heating performance. Replaces Part Numbers Replaces OEM part number: 5304534663, 316489400, 1197384, 316428500, 316428501, 5304462661, 7316489400, PD00085955, EAP17219382, AH1528534, EA1528534, AP3963540, PS1528534, EAP17219382, AP7212939, PS17219382. Compatibility This gas oven bake igniter is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible gas ranges and ovens. Example compatible models include (but are not limited to):Frigidaire FFGF3011LWB, FFGF3054TSElectrolux ECFG3068ASKenmore 790.70402010 Frigidaire Gas Ranges Electrolux Ovens Kenmore Gas Ovens Always verify your appliance model number before ordering. Common Problems This Part Fixes Oven not heating Delayed ignition or long preheat time Gas smell due to ignition failure Burner not lighting Key Features Designed for gas oven bake ignition Provides reliable and consistent ignition High-quality aftermarket replacement Durable construction for long service life Product Specifications Part Number: 5304534663 Part Type: Gas Oven Bake Igniter Brand: XPARTCO Condition: New Amperage: OEM-equivalent (typically 3.2–3.6 amps) Igniter Style: Flat / Rectangular OEM / Aftermarket: Aftermarket Application: Gas Ovens & Ranges Troubleshooting Guide Oven not igniting → Weak or failed igniter Slow preheat → Igniter not drawing enough current Clicking but no flame → Igniter issue likely When Should You Replace This Igniter? Replace this igniter if your oven fails to heat, takes too long to preheat, or does not ignite the gas burner properly. Installation Notes ⚠️ Disconnect power and shut off gas before installation. Remove mounting screws, disconnect wiring, and install the new igniter carefully. Avoid touching the igniter surface with bare hands. Related Parts Gas Oven Safety Valve Oven Control Board Temperature Sensor Frequently Asked Questions Will this igniter fit my oven?This igniter fits many Frigidaire and compatible gas ovens. Always verify your model number. What does a bake igniter do?It ignites the gas burner and allows the oven to heat properly. What are signs of a bad igniter?Oven not heating, delayed ignition, or no flame during operation. Is this OEM or aftermarket?This is a high-quality aftermarket replacement part. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

XPARTCO DG94-00520A Oven Igniter The XPARTCO DG94-00520A is an aftermarket replacement oven burner igniter compatible with select Samsung gas ranges and ovens. The igniter is a hot surface igniter that draws electrical current through the oven safety valve to open it, then heats to ignition temperature to light the gas burner. When the igniter weakens or fails, the oven will not heat, will take too long to preheat, or will emit a gas smell without lighting. This complete assembly includes the igniter with bracket and lead/plug. It features 8-inch leads with female pins, draws 3.4–3.6 amps, and can be used as either a bake or broil igniter depending on the model. The bracket measures 3-3/4" L x 1-3/4" W x 13/16" H and the harness and plug extend 7-7/8" from the igniter body. Verify that the electrical plug matches your existing igniter before ordering. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO DG94-00520A Oven Igniter fixes Samsung gas ovens that won't heat, take too long to preheat, or have an igniter that glows but never lights the burner. Draws 3.4–3.6A. Includes bracket and lead/plug with 8" leads. Can be used as bake or broil igniter depending on model. Always verify plug type matches before ordering. Common Problems This Part Fixes Oven not heating at all — gas is not igniting Oven takes excessively long to preheat (weak igniter not reaching ignition temperature) Igniter glows orange or red but never lights the gas burner Smell of gas when oven is turned on but burner does not light Oven heats inconsistently or shuts off mid-cycle Broiler not lighting on applicable models Clicking sounds from the oven without ignition Replaces Part Numbers This oven igniter directly replaces the following OEM and cross-reference part numbers: DG94-00520A, 2692271, EAP4241428, ASM38124, PD00027453, AP5577941, PS4241428. Always verify the electrical plug type matches your existing igniter before ordering. Contact our support team if you're unsure. Compatibility This igniter is compatible with select gas ranges and ovens from the following brands: Samsung gas ranges (freestanding and slide-in) Important: Some Samsung models use two igniters — one for bake and one for broil. This part can serve as either depending on your model. Verify which igniter position you are replacing and confirm the plug type matches before ordering. Key Features Hot surface igniter — draws current through the oven safety valve to open it, then ignites the gas burner Draws 3.4–3.6 amps — correct amperage range to open the Samsung gas valve and reach ignition temperature Can be used as bake or broil igniter depending on the model Complete assembly — includes igniter, bracket, and lead/plug with 8" leads and female pins Bracket dimensions: 3-3/4" L x 1-3/4" W x 13/16" H; block measures 1-1/2" L Harness and plug extend 7-7/8" from the igniter body Metal, ceramic, and plastic construction — built to withstand high oven temperatures Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number DG94-00520A Part Type Oven Burner Igniter (Hot Surface Igniter) Condition Aftermarket Replacement Application Gas Ranges and Ovens (Bake or Broil) Amperage Draw 3.4 – 3.6 Amps Bracket Dimensions 3-3/4" L x 1-3/4" W x 13/16" H Block Length 1-1/2 inches Lead Length 8 inches (female pins) Harness / Plug Reach 7-7/8 inches from igniter body Material Metal / Ceramic / Plastic Includes Igniter, bracket, and lead/plug assembly Compatible Brands Samsung Installation Notes ⚠️ Shut Off Gas and Unplug Before Starting Shut off the gas supply at the shutoff valve and unplug the range from the power outlet before beginning any repair. Open the oven door and remove the oven racks. Remove the oven bottom panel by unscrewing the retaining screws, then lift and remove the heat shield beneath it to expose the burner assembly. Unscrew the igniter from the burner bracket — typically one or two screws. Carefully disconnect the wiring harness connector. Connect the new DG94-00520A igniter to the wiring harness, secure it to the burner bracket with the screws, then reinstall the heat shield and bottom panel. Restore gas supply and power, then run a test cycle to verify the oven lights properly. Note: Do not touch the ceramic igniter element with bare hands — oils from skin can reduce its lifespan. Tools needed: Phillips screwdriver, nut driver, work gloves. Frequently Asked Questions How do I know if my oven igniter is bad? The most common signs are the oven not heating at all, taking much longer than usual to preheat, or the igniter glowing orange or red but never lighting the burner. A healthy igniter glows bright orange and ignites the gas within 30–90 seconds. If it glows dimly or stays on without lighting the burner, it is drawing insufficient current to open the gas safety valve and needs to be replaced. Why does my oven igniter glow but the oven still doesn't heat? A glowing igniter that never lights the burner is the classic sign of a weak igniter. The igniter must draw enough current — typically 3.2 amps or more — to open the gas safety valve. As igniters age, their resistance increases and amperage draw drops below the threshold needed to open the valve. The igniter glows because it still has some current, but not enough to let gas through. Does my Samsung oven use one igniter or two? Many Samsung gas ranges have two igniters — one for the bake burner (bottom of oven) and one for the broil burner (top of oven). The DG94-00520A can serve as either depending on the model. Check which position is failing before ordering, and verify that the plug type on this igniter matches your existing part. Do I need to verify the plug type before ordering? Yes — this is important. Some Samsung models use a plug that is a direct match for this igniter, while others may require cutting the old plug and using wire nuts or crimp connectors. Inspect the connector on your existing igniter and compare it to the 8" female pin connector included with this part before ordering. Contact our support team if you need help confirming compatibility. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from metal, ceramic, and plastic to match the dimensions and electrical specifications of the original DG94-00520A igniter. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

9758079 Gas Range Oven Spark Electrode Igniter - Compatible with Whirlpool, Kenmore, Maytag Ranges Product Description Restore your gas range’s baking performance with the Aftermarket 9758079 Gas Range Oven Spark Electrode Igniter from Parts-O-Matic. This high-quality aftermarket igniter replaces the original 9758079, designed for select Whirlpool, Kenmore, Maytag, Amana, and other range ovens with Direct Spark Ignition (DSI) systems. Featuring a durable ceramic and metal construction with a .110" male terminal end, it provides reliable sparking to ignite the oven burner. It’s a cost-effective fix for ovens that won’t start, fail to ignite, or produce little to no heat. Handle with care to avoid damaging the ceramic insulator. Enjoy fast and free shipping on all orders at Parts-O-Matic! Compatibility: Compatible with models including but not limited to: Whirlpool: WFG524SLAB0, SF1/2/3, TGP, VSF, WFG, YSF series Kenmore: 66475272502, 6657213301, 66575162301 Maytag, Amana, Jenn-Air, Roper, Estate, Inglis models Replaces part numbers: WP9758079, 9758079, WP9758079VP, AP6013984, PS11747217 Verify your model number or contact Parts-O-Matic support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Amana, Jenn-Air, Roper, Estate, and Inglis gas range models. 🔥 Specifications: Spark electrode igniter with mounting bracket, .110" male terminal end, designed for DSI systems to ignite the oven burner efficiently. 💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a Phillips screwdriver and basic tools; typically installed in 10–20 minutes. 🛡️ Reliable Fixes: Resolves common issues like no ignition, no heat, or gas smell without ignition. Installation Notes: Tools Needed: Phillips screwdriver, small socket set or nut driver, needle-nose pliers. Safety First: Disconnect power and shut off the gas valve before installation. Handle with Care: Avoid damaging the ceramic insulator, as it may crack and affect performance. Installation Steps: Remove oven racks and base plate (2 screws), unscrew the burner (1 screw), disconnect the old igniter’s wire, and remove the igniter (2 screws). Install the new igniter in reverse order. Note: Some users report slight bracket misalignment; minor bending may be required. Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your gas range back to perfect performance today! Add to cart now for a budget-friendly fix with fast and free shipping on your entire order!

Read more less

W10918546CM Gas Oven Igniter Replaces Part Numbers: W10918546, W10140611, 98005652, W10918546VP, WPW10140611, AP6037202, PS11770066. 3.4 - 3.6 Amp, 1.5" block, 3.75" cage, 10" leads w/male pins. Bake igniter for specific single burner Whirlpool range models. Description: This Oven Igniter is a replacement part for select Maytag, Kenmore, Whirlpool gas oven models, responsible for igniting the gas burner that heats the oven. It works by drawing electrical current through the igniter filament, heating it to a high temperature until it glows and ignites the gas to start the cooking process. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less