W10195622 Dishwasher Dish Rack Stop Clip Replaces WPW10195622
The XPARTCO W10195622 is an aftermarket replacement upper dishrack stop clip for Whirlpool dishwashers, and also fits select Jenn-Air, Kenmore, KitchenAid, and Amana models. This small plastic clip mounts at the back end of the upper dishrack's slide rail, preventing the rack from sliding in too far and striking the rear wall of the dishwasher cabinet, or from coming off the track entirely when pulled out.
Light gray in color, measuring approximately 1-1/4" wide, and sold individually — one clip works for either the left or right side of the upper rack. Over time, the plastic can crack or break from repeated use, allowing the rack to slide too far or come loose from its track. A broken stop clip typically shows up as the upper rack sliding out too far, coming off the rails, or falling when pulled forward. It directly replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071.
Quick Answer
The W10195622 Dishwasher Dish Rack Stop Clip fixes Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers where the upper rack slides too far, comes off the rails, or falls out when pulled forward. Light gray, approx. 1-1/4" wide, sold individually. Replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071. This clip is sold individually — if both the left and right stops need replacing, order two.
Common Problems This Part Fixes
Upper dishrack slides in too far and hits the rear wall of the cabinet
Upper dishrack comes off the slide rail when pulled forward
Upper dishrack falls out of the dishwasher
Broken or missing stop clip visible at the back of the track
Rack rollers coming out of the track
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher dish rack stop clip directly replaces the following OEM and cross-reference part numbers:
WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This stop clip is compatible with select Whirlpool dishwashers, and also fits select Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers built on the Whirlpool platform, including model numbers such as WDT710PAHZ, WML35011KB, WVU7130JS, KUDC10FXSS5, KUDE40FXBL1, WDT790SAYM1, 7WDT770PAYM0, 7WDT770PAYM1, 7WDT770PAYW0, 7WDT790SAYM0, and WDF730PAYB0.
Note: This clip mounts at the back end of the slide rail/drawer track (a related but separate part, WPW10195623). Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement upper dishrack stop clip
Resolves "rack slides too far," "comes off the rails," and "rack falls out" symptoms
Light gray, approximately 1-1/4" wide
Works for either the left or right side of the upper rack
Snap-fit installation — no screws required
Sold individually
Replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071
Compatible with Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10195622
OEM Part Number
WPW10195622
Part Type
Dishwasher Upper Dishrack Stop Clip
Condition
Aftermarket Replacement
Color
Light Gray
Width
Approx. 1-1/4"
Fits
Left or right side (universal for either)
Related Part
WPW10195623 slide rail/drawer track (sold separately)
Repair Difficulty
Easy — basic hand tools, novice repair experience
Quantity
1 stop clip (sold individually)
Compatible Brands
Whirlpool, Jenn-Air, Kenmore, KitchenAid, Amana
Installation Notes
⚠️ Unplug Dishwasher Before Starting Disconnect power to the dishwasher before beginning. Wear work gloves. Slide out the upper dish rack to locate the existing stop clip at the back end of the slide rail. Using a flathead screwdriver, gently pry out the old, broken stop clip from the track. Snap the new W10195622 clip into the same position at the back of the track, pressing it in firmly until it's securely seated — this is a snap-fit clip rather than a screwed connection. Slide the rack back onto the rails and test it by pulling it forward and pushing it back, confirming it stops properly at both ends without sliding off the track or hitting the rear wall. Tools needed: flathead screwdriver.
Frequently Asked Questions
My upper rack fell out of the dishwasher. Is this the part I need?
Yes, this is a well-documented symptom of a broken stop clip. One customer described exactly this: "Plastic stop on upper dishwasher rack was broken allowing the rack to come out and fall," and resolved it by prying out the old, broken clip and snapping in a new one in just a few minutes.
Do I need one clip or two?
This part is sold individually, and one clip works for either the left or right side of the upper rack. If both the left and right stop clips need replacing, you'll need to order two.
Do I need to screw this in, or does it snap into place?
This clip snaps into place rather than being screwed in. A flathead screwdriver is useful for prying out the old, damaged clip, but installing the new one is a simple snap-fit into the track — no screwing required.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the size, color, and snap-fit mounting of the original WPW10195622 stop clip used in compatible Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Read more less
