XPARTCO 6501KW2002B Washer Rotor Position Sensor – Compatible with LG and Kenmore Washers Product Description Maintain smooth spin cycles and precise motor control with the XPARTCO 6501KW2002B Washer Rotor Position Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly. Replaces Part Numbers 6501KW2002B, 6501KW2002A, AP7015078, PD00073205, EAP16556422, 4962510, PS16556422, EAP16556422. Compatibility This replacement rotor position sensor fits select LG and Kenmore front-load washers. Example compatible models include (but are not limited to): LG WM2487HRM, LG WM0642HW, and Kenmore 796.40272900. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM performance and precision ⚙️ Accurate Rotor Feedback – Helps regulate motor speed and direction for smooth washing 💰 Cost-Effective Fix – Delivers OEM-level performance at a fraction of the price 🛠️ Plug-and-Play Installation – No wiring modification required 🛡️ Fixes Common Issues – Resolves LE, UE, SE, and spin cycle errors 📐 Product Specification Part Number: 6501KW2002B Component Type: Washer Rotor Position Sensor (Hall Sensor) Material: Durable printed circuit board with reinforced plastic housing Mounting: Direct-fit installation on stator assembly Operating Conditions: Rated for high-humidity, high-vibration washer environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: 10 mm socket wrench, Phillips screwdriver ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock. Steps: Disconnect power and remove the rear access panel. Unscrew the rotor bolt and carefully remove the rotor assembly. Locate and unplug the old sensor from the stator. Install the new XPARTCO 6501KW2002B sensor, aligning mounting tabs. Reconnect the wiring harness, reinstall the rotor, and secure the panel. Restore power and run a spin test to verify correct operation. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore precise washer performance — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

EXPW79SC (8 Pack) Washing Machine Fill Hose Gasket with Screen 8 Pack compatible with 5/ 8 inch washing machine and 3/4 inch garden hose Fine Screen the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively     

Read more less

EXPW79SC (4 Pack) Washing Machine Fill Hose Gasket with Screen 4 Pack compatible with 5/ 8 inch washing machine and 3/4 inch garden hose Fine Screen the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively     

Read more less

WDH6FT Washer Universal 6' Corrugated Drain Hose 6 foot. Corrugated plastic hose fits 1", 1-1/8", 1-1/4" & 1-3/8" outlets for Whirlpool, Kenmore, GE, Frigidaire & most other brands. Cross Reference: WDH6FT, TJ76WDH, AP4568426, 200-6, 2046, 48397, 600-6P, 60356, 6WDH, ERSSD6, HP395, HP406, HP406E, R87-407, SSD-6, SSD6, TJ6WDH, TJSSD-6, OEM13705283, WDH6FT. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov  

Read more less

MEJ62305103 Washer Genuine OEM Water Hose Replaces Part Numbers: MEJ62305103, 2674641, AH3649013, EA3649013, AP5595290, PS3649013.  

Read more less

XPARTCO 6501KW2001A Washer Rotor Positioning Sensor – Compatible with LG and Kenmore Washers Product Description Restore accurate motor control and spin performance with the XPARTCO 6501KW2001A Washer Rotor Positioning Sensor. This Sensor Assembly, also known as a hall sensor is a replacement Part and is a vital component in Specific LG, Kenmore washer Models. This part monitors the direction and speed of the spinning rotor. It then communicates this information to the electronic control board. By doing so, it aids in the precise operation of your washer. If your washer pumps but fails to spin or agitate, it may be indicative of a damaged sensor assembly. Replaces Part Numbers 6501KW2001A, 6501KW2001D, PD00001726, EAP2497738, 6501KW2001C, EBR37560301, AP4457567, PS3529185.  Compatibility This replacement rotor positioning sensor fits select LG and Kenmore front-load washers. Example compatible models include (but are not limited to): LG WM2101HW, LG WM2487HRM, and Kenmore 796.40272900. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM performance and accuracy ⚙️ Precise Motor Feedback – Helps control drum rotation and spin speed 💰 Cost-Effective Solution – High-quality alternative to OEM sensor assembly 🛠️ Easy Installation – Plug-and-play design with secure connector fit 🛡️ Fixes Common Issues – Resolves LE, UE, or spin-related error codes 📐 Product Specification Part Number: 6501KW2001A Component Type: Washer Rotor Position Sensor (Hall Sensor) Material: High-durability circuit board and plastic housing Mounting: Direct-fit replacement on motor stator assembly Operating Conditions: Designed for high-humidity washer environments Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: 10mm socket wrench, Phillips screwdriver ⚠️ Safety First: Always unplug the washer before performing any repairs to prevent electrical shock. Steps: Disconnect power and remove the rear access panel. Remove the rotor bolt and pull off the rotor assembly. Locate and disconnect the wiring harness from the old sensor. Remove the old 6501KW2001A sensor and install the new XPARTCO replacement. Reconnect wiring, reinstall the rotor, and secure the rear panel. Restore power and run a spin test to verify repair. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer spin and motor issues — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

DC97-18682D Washer Genuine Drain Hose Assembly – Compatible with Samsung Washers Product Description Maintain proper water drainage with the DC97-18682D Washer Genuine Drain Hose Assembly. This OEM replacement hose is designed to channel used water safely from your washer to the household drain system. A damaged or clogged drain hose can cause leaks, standing water, or drainage errors. Replacing it with this genuine part restores dependable washer performance and prevents messy water issues. Replaces Part Numbers DC97-18682D, DC97-18682B, DC97-18682C, DC97-18682E, PD00070138, EAP16556783, AP7018854, PS16556783. Compatibility This genuine drain hose assembly is compatible with select Samsung front-load washers. Example compatible models include (but are not limited to): Samsung WF42H5000AW, WF45K6500AW, WF56H9100AW. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Designed specifically for Samsung washers 💧 Reliable Drainage – Ensures proper water flow and prevents backup or leaks 💰 Cost-Effective Solution – Avoids costly water damage and washer breakdowns 🛠️ Easy Installation – Flexible design for quick fit with standard tools 🛡️ Fixes Common Issues – Resolves leaks, clogs, or drain-related error codes 📐 Product Specification Part Number: DC97-18682D Component Type: Washer Drain Hose Assembly Material: Heavy-duty rubber and reinforced plastic fittings Mounting: Direct fit replacement with factory connections Operating Conditions: Standard residential washer use Compliance: Genuine Samsung OEM part 🛠️ Installation Notes Tools Needed: Pliers, screwdriver (if clamps are included) ⚠️ Safety First: Always disconnect power and water supply before beginning any washer repair. Steps: Turn off water supply and unplug washer. Locate drain hose at the back of the washer. Remove hose clamps securing the old drain hose. Detach old hose from washer and household drain. Connect new DC97-18682D drain hose to washer outlet. Secure with clamps and ensure a snug fit into the drain standpipe. Restore water, reconnect power, and test for leaks. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Prevent leaks and drainage problems — Add to Cart Now for a reliable, factory-approved repair!

Read more less

48FFK Washer Rubber Water Inlet Fill Hoses 4' (Set of 2) - Universal Compatibility Product Description Ensure a reliable water supply for your washing machine with the 48FFK Washer Rubber Water Inlet Fill Hoses. This universal set includes two 4-foot rubber hoses designed to connect the water supply to the inlet valves of most standard washing machines. Featuring a 3/8" inner diameter and 3/4" brass garden hose fittings with included high-temperature washers, these hoses provide a secure, leak-free connection, addressing issues like leaks, low water pressure, or worn-out hoses. Note: Includes (2) 4' rubber inlet fill hoses with brass nuts and high-temperature washers. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: 48FFK, HOSE-RUBWMH48BLKPR Compatibility: Compatible with most standard washing machines, including but not limited to: Whirlpool: WFW5620HW, WTW5000DW, WFW92HEFW, WTW8120HC0 Maytag: MHW5630HW, MVWC565FW, MHW8630HC Samsung: WF45R6100AC, WF50T8500AV LG: WM3700HWA, WM4200HBA GE: GFW650SSNWW, GTW685BSLWS Kenmore: 79641962610, 79641383410 Amana: NTW4516FW Frigidaire: FFTW4120SW Common models: Whirlpool WTW4955HW, Samsung WF45T6000AW, LG WM3400CW Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits most standard washing machines from Whirlpool, Maytag, Samsung, LG, GE, Kenmore, Amana, Frigidaire, and more. 🔧 Specifications: 4' rubber hoses, 3/8" inner diameter, 3/4" brass garden hose fittings, includes high-temperature washers. 💪 Reliable Performance: Durable rubber construction with brass nuts ensures leak-free water supply for consistent washing performance. 🛠️ Easy Installation: Requires no tools; typically installed in 5–10 minutes. 🛡️ Effective Fixes: Resolves leaks, low water pressure, or slow filling due to worn or damaged hoses. Product Specification Part Number: 48FFK Component Type: Washer rubber water inlet fill hoses Material: Durable rubber with brass nuts Dimensions: 4' length, 3/8" inner diameter, 3/4" garden hose fittings Operating Conditions: Suitable for residential water pressure, hot and cold water lines Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and turn off the water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack 4 Feet - Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Kenmore Product Description Ensure reliable water supply for your washer with the Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack. These OEM 4-foot black rubber hoses are designed for Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines, delivering hot and cold water with anti-corrosive brass couplings and pre-installed high-quality EPDM washers. With a 1050 PSI burst strength, they prevent leaks and ensure consistent water flow, addressing issues like leaking, low water flow, or hose failure. Note: Includes two 4-foot hoses with built-in O-rings. Disconnect power and water supply before installation. Replace hoses every 5 years to reduce the risk of failure. Replaces part numbers: 8212546RP, AP3885155, 1178876, 49535, 8212546IP, 8212546RW, PS1156134. Compatibility: Compatible with models including but not limited to: Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WTW5000DW0 Maytag: MHW3500FW0, MHW5500FC0, MVWC565FW0, MVWB835DW0 KitchenAid: KSMW1030SS0 Jenn-Air, Amana, Kenmore: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines. 💧 Specifications: OEM 4-foot black rubber hoses with brass couplings, 1050 PSI burst strength, and EPDM washers. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and leak-free operation. 🛠️ Easy Installation: Requires pliers and work gloves; typically installed in 10–15 minutes. 🛡️ Effective Fixes: Resolves leaking, low water flow, or hose failure issues. Product Specification Part Number: Genuine Whirlpool 8212546RP Component Type: Washer fill hoses (2-pack) Material: Black rubber with brass couplings, EPDM washers Dimensions: 4 ft. length. Mounting: 3/4" male and female connections with built-in O-rings Operating Conditions: Suitable for hot and cold water in household washing machine environments Compliance: Exceeds IAPMO, CSA, ANSI, IEC 61770, and RMA standards; Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and turn off hot and cold water supplies before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer running efficiently today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool W11244231 Washer Drain Hose - Compatible with Whirlpool, Maytag, Amana, Kenmore Product Description Keep your washer draining smoothly with the Genuine Whirlpool W11244231 Washer Drain Hose. This OEM drain hose is designed for select Whirlpool, Maytag, Amana, and Kenmore washing machines, channeling water from the washer to the drain during wash and rinse cycles. Made of durable corrugated plastic, it prevents leaks, kinks, and clogs, delivering reliable performance as an authentic Whirlpool part. Note: Includes one drain hose with fittings. Disconnect power before installation. Inspect drain pump and connections for debris to ensure optimal performance. Replaces part numbers: W11244231, AP6339776, W10826733, W10221546, 4814009, PS12578897, W10769870, W10821090, W11199768, W11199820, W11203364, W11249137. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW5000DW0, WTW7000DW0, WTW8000DW0, WTW8500DC0 Maytag: MVWC565FW0, MVWB765FW0, MVWB835DW0 Amana: NTW4516FW0, NTW4705EW0 Kenmore: 110.25132411, 110.26132410 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, and Kenmore washing machines. 💧 Specifications: OEM corrugated plastic drain hose. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, and hose clamp; typically installed in 10–20 minutes. 🛡️ Effective Fixes: Resolves leaking, kinking, or clogged drain hose issues. Product Specification Part Number: Genuine Whirlpool W11244231 Component Type: Washer drain hose Material: Corrugated plastic with rubber fittings Mounting: Connects to drain pump and external drain with hose clamp Operating Conditions: Suitable for household washing machine environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer draining efficiently today! Add to cart now for a reliable fix!

Read more less

WH41X22935 Washer Tub to Pump Hose Washer Tub to Pump Hose Replaces Part Number: WH41X22935, WH41X10163, 123C7981, 4258948, J27-763, WH41X0371, WH41X371, AP5983873, PS11721808. Description: This Washer Tub to Pump Hose is a replacement part for select GE, Hotpoint Top-Load Washer models.  This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10467289 Washer Genuine OEM Temperature Sensor Replaces Part Numbers: WPW10467289, W10467289, 2629420, 8181705, 8182291, 8540225, 8540226, W10176658, W10176659, OEM18065663, AP6021886,, PS11755214. Description: This Water Temperature Sensor is a Genuine OEM part for specific Kenmore, Whirlpool washing machine models. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less