ERP 3355806 Washer Lid Switch Replaces Part Number: WP3355806, ER3355806, 3355806, AP6008072, PS11741201.  Description: This Lid Switch Kit is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. This part is responsible for detecting whether the washing machine lid is closed. If the switch senses the lid is open, it prevents the washer from starting or continuing a cycle, thereby protecting users from potential injury caused by the spinning agitator or drum.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

W11220230 Washer Genuine OEM Water Valve – Compatible with Whirlpool, Maytag, Amana, Crosley, Roper Washers Product Description Keep your washer filling properly with the W11220230 Washer Genuine OEM Water Valve. This factory-approved valve regulates hot and cold water flow into the tub during wash cycles. A faulty valve can cause filling issues, leaks, or error codes. Replacing it with this genuine OEM part ensures dependable performance and efficient cleaning. Replaces Part Numbers W11220230, W10853296, 4591408, W10632527, W10758829, W11096268, PD00042661, EAP12349461, AP6329544, PS12349461. Compatibility This water valve is compatible with select Whirlpool, Maytag, Amana, Crosley, and Roper washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW3, Maytag MVWC465HW2, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Part – Designed for Whirlpool, Maytag, Amana, Crosley, and Roper washers 💧 Reliable Water Control – Ensures accurate water flow and filling cycles 💰 Cost-Effective OEM Repair – Long-lasting factory-tested replacement 🛠️ DIY Friendly – Installs in 20–30 minutes with basic tools 🛡️ Fixes Common Issues – Resolves filling problems, leaks, and error codes 📐 Product Specification Part Number: W11220230 Component Type: Washer Water Inlet Valve Material: Reinforced plastic body with solenoid valves Mounting: Direct-fit replacement Operating Conditions: Designed for residential washer use Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, adjustable wrench ⚠️ Safety First: Unplug washer and turn off water supply before beginning repairs. Steps: Disconnect washer from power and water supply. Remove back panel to access the water valve. Disconnect hoses and wiring harness from the old valve. Unscrew and remove the defective valve. Install the new W11220230 valve, reconnect hoses and wiring. Reassemble panel, restore water and power, and run a test cycle. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer filling issues today — Add to Cart Now for a safe, factory-approved repair!

Read more less

XPARTCO W11458345 Washer Drain Pump - Compatible with Whirlpool, Maytag, Amana Product Description Restore your washer’s drainage with the XPARTCO W11458345 Washer Drain Pump. This replacement drain pump is designed as a replacement for select Whirlpool, Maytag, Amana, and other compatible washing machines, offering a cost-effective alternative to the original. It efficiently drains wastewater during wash cycles and includes a large filter that can be cleaned monthly with Washing Machine Cleaner Tablets. This part addresses issues like water not draining, loud buzzing or grinding noises, or failure to enter agitation cycles, often caused by blockages, wear, or pump motor failure. Note: Includes (1) drain pump assembly. Disconnect power before installation. Verify compatibility with your washer model. Replaces part numbers: W11458345, W11316609, W11319789, W10918608, PD00062450, EAP16218041, AP6989186, PS16218041. Compatibility: Compatible with select washer models, including but not limited to: Whirlpool: WFW862CHC3, WFW6620HW1, WFW6620HW2, WFW9620HC2, 8TWFW8620HW1 Maytag: MHW5630HW1, MHW5630HW3, 7MWFW5622HW2 Amana: NFW5800HW0 Kenmore: 110.42932200 Inglis: IFW5900HW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, and Kenmore washers. 🔧 Specifications: Replacement drain pump, 120V, stainless steel construction. 💪 Reliable Performance: Efficiently drains wastewater for optimal washer operation. 🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves water not draining, buzzing/grinding noises, or agitation cycle issues. Product Specification Part Number: XPARTCO W11458345 Component Type: Washer drain pump assembly Material: Stainless steel and plastic Electrical Specs: 120V, submersible design Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

WH23X28418 Washer Drain Pump - Genuine OEM for GE, Hotpoint Product Description Ensure your washer drains efficiently with the WH23X28418 Washer Drain Pump. This genuine OEM part, manufactured by GE, is designed as a replacement for select GE, Hotpoint, and RCA front-load washing machines. It effectively removes water and soap from the washer during the drain cycle, maintaining optimal performance. This part addresses issues like water remaining in the drum, noisy operation, failure to drain, or leaks, often caused by a clogged, damaged, or failed drain pump. Note: Includes (1) drain pump and motor with harness and drain seal. Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: WH23X24178, WH23X28418, WH23X27574, 290D1201G001, 290D1201G002, 290D1201G003, B40-3A01, B30-3A02, PD00055680, EAP12723115, AP6889136, PS12723115. Compatibility: Compatible with select washer models, including but not limited to: GE: GTW485ASJ3WS, GTW485ASJ4WS, GTW485ASJ5WS, GTW490ACJ, GTW500ASN0WS, GTW680BPL0DG, GTW680BPL1DG, GTW720BPN0DG, GTW725BPN0DG, GTW465ASN1WW Hotpoint: HTW240ASK0WS, HTW240ASK2WS, HTW240ASK4WS RCA: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and RCA front-load washers. 🔧 Specifications: 120V, 60Hz, 1.25A, plastic and metal construction, includes pump, motor, harness, and drain seal. 💪 Reliable Performance: Ensures efficient water and soap removal for consistent drainage. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves water remaining in drum, noisy operation, failure to drain, or leaks. Product Specification Part Number: WH23X28418 Component Type: Washer drain pump Material: Plastic and metal (Based on web:8, web:19) Electrical Specs: 120V, 60Hz, 1.25A, CL.A Run Time: 10 min ON / 50 min OFF Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

W11458345 Genuine OEM Washer Drain Pump - Compatible with Whirlpool, Maytag, Amana Product Description Restore your washer’s performance with the W11458345 Genuine OEM Washer Drain Pump. This Whirlpool-manufactured pump is designed as a replacement for select Whirlpool, Maytag, Amana, Inglis, and Kenmore washing machines. It efficiently drains wastewater during wash cycles and includes a large filter that can be cleaned monthly with Washing Machine Cleaner Tablets. This part addresses issues like water not draining, loud buzzing or grinding noises, or failure to enter agitation cycles, often caused by blockages, wear, or pump motor failure. Note: Includes (1) drain pump assembly. Disconnect power before installation. Verify compatibility with your washer model. Replaces part numbers: W11458345, W11316609, W10918608, W11319789, PD00062450, EAP16218041, AP6989186, PS16218041. Compatibility: Compatible with select washer models, including but not limited to: Whirlpool: WFW862CHC3, WFW6620HW1, WFW6620HW2, WFW9620HC2, 8TWFW8620HW1 Maytag: MHW5630HW1, MHW5630HW3, 7MWFW5622HW2 Amana: NFW5800HW0 Kenmore: 110.42932200 Inglis: IFW5900HW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, and Kenmore washers. 🔧 Specifications: Genuine OEM Whirlpool drain pump, 120V, stainless steel construction. 💪 Reliable Performance: Efficiently drains wastewater for optimal washer operation. 🛠️ Easy Installation: Requires screwdriver, pliers, and nut driver; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves water not draining, buzzing/grinding noises, or agitation cycle issues. Product Specification Part Number: W11458345 Component Type: Washer drain pump assembly Material: Stainless steel and plastic (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15) Dimensions: Approximately 9.75" L x 9.5" W x 5.25" H (Based on web:0) Weight: 3.32 lbs (Based on web:0) Electrical Specs: 120V, submersible design (Based on web:0, web:2) Compliance: UL-listed, Prop 65 warning for California (Based on web:0, web:1, web:2, web:3, web:4, web:5, web:6, web:7, web:8, web:9, web:10, web:11, web:12, web:13, web:14, web:15) Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a reliable fix!

Read more less

Genuine Whirlpool WPW10605427 Washer Drain Pump - Compatible with Whirlpool, Maytag, KitchenAid, Amana, Kenmore Product Description Restore your washer’s performance with the Genuine Whirlpool WPW10605427 Washer Drain Pump. This OEM drain pump is designed for select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines, efficiently circulating and draining water during wash and rinse cycles. It addresses issues like failure to drain, leaking, or unusual noises, delivering reliable performance as an authentic Whirlpool part. Note: Includes one drain pump with electrical connector. Disconnect power before installation. Inspect pump filter and drain hoses for clogs to ensure optimal performance. Replaces part numbers: WPW10605427, WPW10425238, W10425238, W10605427, W10799064, W10799065, W10903216, W10918044, PD00038328, EAP11756700, AP6023357, PS11756700. Compatibility: Compatible with models including but not limited to: Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WFW92HEFW0 Maytag: MHW3500FW0, MHW5500FC0, MHW7100DW0 KitchenAid: KSMW1030SS0 Amana, Kenmore: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines. 💧 Specifications: OEM drain pump, 120V, stainless steel and plastic construction. 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, and work gloves; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves failure to drain, leaking, or unusual noises during operation. Product Specification Part Number: Genuine Whirlpool WPW10605427 Component Type: Washer drain pump Material: Stainless steel and plastic Electrical Specs: 120 volts, AC Mounting: Screw-mounted, typically at the bottom rear of the washer Operating Conditions: Suitable for household washing machine environments Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the washer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer draining efficiently today! Add to cart now for a reliable fix!

Read more less

W11670519 Washer Lid Lock - Compatible with Whirlpool, Maytag, Amana, Kenmore Product Description Restore your washer’s safety and performance with the W11670519 Lid Lock from Parts-O-Matic. This genuine OEM replacement lid lock secures the washer lid during wash and spin cycles, ensuring safe operation. Designed for Whirlpool, Maytag, Amana, and Kenmore top-load washers, it fixes issues like washer not starting, stopping mid-cycle, or error codes. Note: Includes one lid lock assembly.  Replaces part numbers: W11670519, W11368616, EAP17215992, PD00085482, AP7214714, PS17215992. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW5100HC0, WTW5105HW0, WTW6120HC0, WTW8120HC0 Maytag: MVW6230HW0, MVW7230HC0, MVW7232HW0 Amana: NTW4519JW0 Kenmore: 110.21652020 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, Maytag, Amana, and Kenmore top-load washer models. 🔒 Specifications: OEM lid lock assembly and electrical connectors for reliable safety. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, work gloves; typically installed in 15–30 minutes. 🛡️ Reliable Fixes: Resolves washer not starting, stopping mid-cycle, or error codes. Installation Notes: Safety First: Unplug the washer before installation to avoid electrical shock. Access the lid lock (under top or control panel), disconnect wiring, remove the old lock, install the new lock, and reconnect. Run a diagnostic cycle post-installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running smoothly today! Add to cart now for a budget-friendly fix!

Read more less

DC34-00025G Washer Genuine OEM Lid Switch and Lock Assembly – Fits Samsung Washers Product Overview The DC34-00025G Washer Lid Switch and Lock Assembly is a genuine OEM replacement part that ensures your washer lid stays securely locked during wash and spin cycles. This part detects when the lid is closed and locks it to prevent accidental opening, providing safety and proper cycle operation. A worn or broken lid lock can cause your washer to stop mid-cycle, display error codes, or fail to start. Replacing it restores dependable washer performance and safety compliance. Replaces Part Numbers This lid switch and lock assembly replaces DC34-00025G, AP6884125, PS12720530. Manufactured to original equipment specifications for a precise fit and long-term durability. Compatible Brands Compatible with select Samsung top-load washers manufactured by Samsung. Fits a variety of models using this specific lid lock assembly. Fixes the Following Issues Washer won’t start or stops mid-cycle Lid doesn’t lock properly Error codes related to lid switch or lock failure Washer won't enter spin or drain cycles Why Buy from Parts‑O‑Matic Factory-original genuine OEM part Fast and free U.S. shipping Trusted by appliance professionals and DIYers Backed by reliable customer support

Read more less

XPARTCO DC97-19289F Washer Drain Pump Assembly Replaces Part Number: DC97-19289F, DC97-17349B, DC97-19289B, AP6806651, PS12592631. Washer drain pump for select Samsung washer models. Description: This Drain Pump is a replacement part for select Samsung washing machine models. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less