140171068053 Genuine OEM Frigidaire Range Main Control Board
The 140171068053 is the Genuine OEM main control board (also called the OVC — Oven Control board) for select Frigidaire and Electrolux freestanding ranges. This board is the central brain of the range, managing oven temperature regulation, bake and broil cycles, the digital clock and timer display, and user input through the control panel. When it fails, the range can throw error codes, refuse to heat, display a blank or scrambled screen, or stop responding to button presses entirely.
Frigidaire ranges communicate problems through F-code error codes displayed on the control panel, and many of them trace directly back to the main control board. Codes like F10 (runaway temperature), F11 (shorted keypad communication), F13 (EEPROM memory failure), and F14 (communication loss between the board and keypad) are all signals that the control board itself has failed or is failing. Before replacing the board, try a power-cycle reset — disconnect the range from power for five full minutes and restore it. If the error code returns, the board needs to be replaced. This is the board only and does not include the overlay or touchpad panel.
🔧 Will This Fix Your Range?
Replace this control board if your Frigidaire range displays an F-code error that persists after a power-cycle reset, if the oven won't heat at all, if the display is blank or garbled, or if the control panel buttons no longer respond. Part Number:
140171068053 — Genuine OEM Frigidaire main control board (OVC).
Board only — overlay/touchpad sold separately.
Common Symptoms This Part Fixes
- Range displays F10, F11, F13, F14, or other F-code errors that persist after a power reset
- Oven does not heat in bake or broil mode
- Digital display is blank, flickering, or showing scrambled characters
- Control panel buttons are unresponsive or trigger the wrong function
- Range shuts off during use or won't maintain set temperature
- Self-clean cycle no longer works
Replaces These Part Numbers
140171068053, 5304535108, 140171069028, 5304534719, 5304525430, A17106805, AFR1567795, AP8071655, FIX18395757, PD00096163, PS18395757
Compatible With
Compatible Brands
Frigidaire
Electrolux
Kenmore
Gibson
Kelvinator
Westinghouse
This board fits select Frigidaire and Electrolux freestanding ranges, including both electric and gas models. Kenmore ranges built by Electrolux (model numbers typically starting with 790) also use this board. Always confirm compatibility by matching your full model number before ordering.
Key Features
- Genuine OEM Frigidaire main control board — factory-original part
- Controls oven temperature regulation, bake/broil cycles, clock, and timer functions
- Fits both electric and gas Frigidaire freestanding ranges
- Board only — overlay (touchpad/membrane panel) is not included and sold separately
- Replaces earlier part numbers 5304535108, 5304525430, 5304534719, and others
- Typical installation time 30–45 minutes with basic hand tools
Product Specifications
| Part Number |
140171068053 |
| OEM Part Number |
140171068053 |
| Part Type |
Range Main Control Board (OVC) |
| Condition |
Genuine OEM |
| Brand |
Frigidaire |
| Includes |
Control board only (overlay not included) |
| Compatible Appliance Type |
Freestanding Range (Electric and Gas) |
| Compatible Brands |
Frigidaire, Electrolux, Kenmore, Gibson, Kelvinator, Westinghouse |
⚠️ Safety Warning
Disconnect the range from all power sources before beginning this repair — unplug the unit or turn off the circuit breaker. For gas ranges, also shut off the gas supply valve. The control board is located behind the control panel at the rear of the range. Before disconnecting any wire harnesses, take a photo of each connector and its position so you can reconnect the new board correctly. Handle the new board by its edges to avoid static damage to the electronic components. Do not touch the circuit traces or chips. After installation, restore power and test all oven functions — bake, broil, timer, and clock — to confirm the new board is operating correctly.
Frequently Asked Questions
My range is showing an F10 error code. Does that mean I need this board?
F10 indicates a runaway temperature condition, which is usually caused by a failed control board or a shorted oven temperature sensor. Start by checking the temperature sensor — unplug the range, disconnect the sensor wires at the board, and measure the sensor's resistance with a multimeter. At room temperature it should read around 1,080 ohms. If the sensor is within range and the F10 returns after a power-cycle reset, the control board is the most likely cause.
How do I tell the difference between a bad control board and a bad overlay (touchpad)?
If the display is completely blank or scrambled and no buttons respond at all, the control board is more likely at fault. If the display works and shows the time but certain buttons don't respond or trigger wrong functions, the overlay (touchpad membrane) may be the problem. An F11 or F14 error specifically points to a communication failure between the two, so check the ribbon cable connection between them before replacing either part.
Does this board include the touchpad overlay?
No. This is the control board only. The overlay — the membrane panel with the buttons and display window — is a separate part. If your overlay is peeling, cracked, or has unresponsive buttons, you'll need to order it separately using your model number to find the correct one.
Will a power surge damage a new control board?
Yes. Power surges are one of the most common causes of control board failure in ranges. After installing the new board, consider plugging the range into a dedicated surge protector rated for major appliances, or have an electrician install a whole-home surge protector at the breaker panel. Lightning strikes and utility fluctuations can destroy a new board the same way they killed the old one.
My Frigidaire range is a gas model — will this board still work?
Yes. The 140171068053 fits both electric and gas Frigidaire freestanding ranges in the compatible model list. The control board manages the oven functions (bake, broil, temperature, timer) on both types. On gas models the board controls the oven igniter circuit rather than electric heating elements, but it is the same board.
✔ Genuine OEM Part
🚚 Fast Shipping
📦 In Stock
🔧 30–45 Min Install
