4392065 Dryer Genuine Maintenance Kit
Product Description
This is the Genuine OEM Whirlpool Dryer Maintenance Kit, part number 4392065. It contains everything needed to restore a noisy, sluggish, or non-tumbling dryer in a single repair — all the wear parts that fail together are replaced at once.
The kit fits most 29-inch large-capacity dryers built in 1965 or later across the full Whirlpool family of brands, including Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Roper, Crosley, Estate, Admiral, Norge, Magic Chef, and Inglis.
Drum rollers, the idler pulley, and the drive belt are the three highest-wear components in any drum-style dryer. When one fails, the others are typically not far behind. Replacing them together as a set is the most cost-effective and time-efficient repair approach — one disassembly, all issues resolved.
Quick Answer
Part 4392065 is the Genuine OEM Whirlpool Dryer Maintenance Kit. It includes the drive belt (341241), two drum support rollers (349241T), and the idler pulley (691366) — the three components responsible for nearly all dryer noise and tumbling problems — along with mounting hardware and instructions.
Fits most 29-inch large-capacity dryers from 1965 onward across Whirlpool, Maytag, Kenmore, KitchenAid, Jenn-Air, Amana, Roper, Crosley, Estate, Admiral, Norge, Magic Chef, and Inglis.
What's Included in the Kit
-
Drive Belt (341241) — Multi-rib belt; wraps the drum and connects to the motor and idler pulley
-
2 Drum Support Rollers (349241T) — Support the rear of the drum; most common source of squealing and thumping
-
Idler Pulley (691366) — Maintains belt tension; worn pulleys cause squealing and belt slippage
-
4 Tri-Ring Mounting Clips — Secure the rollers to their shafts
- 1 Retaining Clip
- Instructions
Common Problems This Kit Fixes
- Loud squealing, squeaking, or thumping while the drum is turning
- Drum not spinning or turning very slowly
- Scraping or grinding noise during operation
- Clothes taking multiple cycles to dry (drum slipping, reduced tumbling)
- Marks or scuffs left on clothing from worn roller edges
- Dryer runs but drum does not move at all (broken belt)
Replaces Part Numbers
This Dryer Maintenance Kit replaces the following cross-reference and superseded part numbers:
4392065 replaces 2014, 26000279435, 26000279436, 279435, 279436, 279708, 279708MS, 279709, 279709MS, 279860, 279948, 4392065VP, 587636, 80046, 8106, 8237, 8238, AWP39348, PD00002464, AH373087, EA373087, AP3131942, PS373087, WP691366, 349241T, 341241
If your parts diagram or service manual shows a different number, contact our support team and we'll verify whether it matches.
Compatibility
Fits most 29-inch large-capacity dryers built 1965 or later across brands including Whirlpool, Maytag, Kenmore, KitchenAid, Jenn-Air, Amana, Roper, Crosley, Estate, Admiral, Norge, Magic Chef, and Inglis. Common compatible models include:
- Whirlpool LER4634EQ2, LER4634JQ0, LER5636KQ1, LER6636PW0, LER7646EQ2
- Whirlpool WED5500SQ0, WED5600SQ0, WED6400SG1, WED8300SW0
- Maytag MDE9700AYW, MEDB200VQ1, MEDB850WQ0, MED5500FW0
- Kenmore 11060012001, 11061202010, 11062102310, 11060522900
- Roper REL4634BQ1, RGX4634KQ1 • Estate TGDS740PQ1, TEDS840PQ0
Note: This kit fits hundreds of models. Some parts within the kit may not apply to every model — always verify your full model number before ordering. Contact our support team if you need compatibility confirmed before you buy.
Key Features
-
Genuine OEM Part — manufactured by Whirlpool to exact factory specifications
-
Complete Maintenance Set — belt, rollers, idler pulley, and hardware in one kit
-
Broadest Compatibility — fits 29-inch large-capacity models across 13+ brand families
-
One-Repair Solution — replace all high-wear components in a single disassembly
-
New Condition — ships in original OEM packaging with instructions
Product Specifications
| Part Number |
4392065 |
| OEM Part Number |
4392065 |
| Manufacturer |
Whirlpool |
| Part Type |
Dryer Maintenance / Repair Kit |
| Condition |
Genuine OEM — New |
| Kit Contents |
Drive Belt (341241), 2 Drum Rollers (349241T), Idler Pulley (691366), 4 Tri-Ring Clips, 1 Retaining Clip, Instructions |
| Belt Length |
Approx. 92-1/4 inches (multi-rib) |
| Dryer Width |
29-inch large-capacity models |
| Compatible Brands |
Whirlpool, Maytag, Kenmore, KitchenAid, Jenn-Air, Amana, Roper, Crosley, Estate, Admiral, Norge, Magic Chef, Inglis |
| Quantity |
1 Kit (complete set) |
⚠️ Disconnect Power Before Starting Unplug the dryer or switch off its circuit breaker before beginning any repair. For gas dryers, also turn off the gas supply valve. This repair requires removing the top panel, front panel, and drum to access the belt, rollers, and idler pulley. Difficulty is rated easy-to-moderate with basic hand tools (screwdriver, putty knife, nut driver). Wear work gloves to protect hands from sheet metal edges inside the cabinet.
Frequently Asked Questions
My dryer is squealing — do I need the whole kit or just the rollers?
Squealing is most often the drum support rollers, but the idler pulley is a close second. Since the dryer must be fully disassembled to reach either part, replacing both — along with the belt — at the same time is strongly recommended. The kit costs little more than individual rollers alone and prevents a callback repair when the next part fails.
Does this kit work on both gas and electric dryers?
Yes. The belt, drum rollers, and idler pulley are identical in gas and electric 29-inch Whirlpool-platform dryers. The kit is not gas-specific — it covers both fuel types as long as your dryer is a 29-inch large-capacity model.
What does "some parts in this kit may not fit your specific model" mean?
This kit spans hundreds of models built over several decades. While the core belt, rollers, and idler pulley fit all compatible models, minor hardware (tri-ring sizes or clip style) may vary. The kit includes multiple sizes to cover the range. Always enter your full model number to confirm before ordering.
My drum stopped spinning completely — is the belt broken?
Almost certainly yes. When the drum stops spinning while the motor still runs, a broken drive belt is the most common cause. The 4392065 kit includes the replacement belt (341241) along with the rollers and pulley — the complete set for this repair.
✔ Genuine OEM Parts ✔ Secure Checkout ✔ Compatibility Support ✔ Fast US Shipping
