5304539804 Universal Oven Flat Igniter

Description

5304539804 Universal Oven Flat Igniter (Silicon Carbide Hot-Surface Igniter for Gas Ranges) — Genuine OEM

Product Description

The 5304539804 is a genuine OEM flat-style hot-surface igniter for gas ranges, wall ovens, and microwave/oven combos manufactured by Electrolux and its subsidiary brands. It uses a silicon carbide (SiC) heating element mounted on a ceramic base to ignite the oven burner. The igniter does not light the gas directly with a spark — it works by drawing electrical current through the oven's gas safety valve. When you turn the oven on, the control board sends 120V to the igniter, which begins to heat up and glow. As the silicon carbide element reaches operating temperature, its electrical resistance drops and the current flowing through the circuit rises. When that current reaches the gas safety valve's opening threshold — typically between 3.2 and 3.6 amps — the valve opens, gas flows to the burner, and the glowing igniter lights it. The igniter stays energized throughout the entire bake or broil cycle to keep the safety valve open.

This igniter fails gradually rather than all at once. Over hundreds of heating cycles, the silicon carbide element develops microscopic cracks from repeated thermal expansion and contraction. These cracks increase the element's electrical resistance, which reduces the current flowing through the circuit. Eventually the current drops below the safety valve's minimum opening threshold — the igniter still glows visibly, but it can no longer draw enough amperage to open the valve. This is why the most common symptom of a failing igniter is an oven that heats up normally sometimes but takes longer and longer to preheat, or an igniter that glows orange or red for several minutes without the burner ever lighting. By the time the igniter fails completely and won't glow at all, the element has cracked through entirely and lost electrical continuity.

Quick Answer

Is Your Oven Igniter the Problem?

A gas oven that won't heat at all, takes noticeably longer to preheat than it used to, or has an igniter that glows for more than 90 seconds without the burner lighting is showing symptoms commonly associated with a weakened or failed igniter. The igniter is the single most common cause of a gas oven not heating. Before replacing, confirm that the oven is receiving power (the clock and controls should be working), that the gas supply valve behind the range is fully open, and that you don't smell gas at the burner when the oven is turned on (a gas smell without ignition could indicate a different problem). If the igniter does not glow at all when the oven is turned on, verify power is reaching the igniter circuit — a tripped breaker, a failed oven control board, or a blown thermal fuse can also prevent the igniter from energizing. If the igniter glows but the oven won't heat, the igniter is the most likely cause.

Common Symptoms

  • Gas oven does not heat at all — igniter does not glow
  • Igniter glows orange or red but gas burner never lights
  • Oven takes significantly longer to preheat than it used to
  • Igniter glows for more than 90 seconds without igniting the burner
  • Oven heats intermittently — works sometimes but not others
  • Little to no heat when baking despite oven being turned on

Replaces Part Numbers

The 5304539804 is a Smart Choice branded genuine OEM universal flat oven igniter that serves as a direct replacement across a wide range of Electrolux/Frigidaire gas ranges, wall ovens, and microwave/oven combos. It supersedes and replaces the following part and catalog numbers.

5304539804 replaces 5303935066, 318177710, 5304515072, 318177720, 08009420, 08013883, 08067971, 10064, 10222, 12872, 3131090, 3131300, 316030600, 316428600, 316T031P01, 316T031P02, 3203706, 41-204, 5303131300, 5303207520, 5303207521, 5303210788, 5303308452, 5303308468, 5303937521, 5308009420, 54099H05, 7318177710, 8009420, AH470129, AP00205013, AP205013, AP205016, EA470129, F16-747, F17-038, F17-039, GR411, IGN-4, IGN-5, IGN-8, IGN5, P205013, P205016, P205034, AFR17138, AP2150412, EAP470129, PD00000105, PS470129

Compatibility & Model Cross Reference

This genuine OEM igniter fits select Electrolux-manufactured gas ranges, wall ovens, and microwave/oven combos. It is a universal flat-style igniter designed to work across multiple brand families under the Electrolux umbrella. Always confirm your specific model number against the manufacturer's parts diagram before ordering.

Frigidaire: FFGF3054TS, FGGF3036TF, FGF368GCA, FFGF3052TS, FFLF3047LS

Kenmore: 790.70113700, 790.71313700, 790.36903900

Electrolux: EW30GF65GS, EI30GF45QS

Tappan: TGF317ESA, TGF336ASD

Gibson: GGF3032KB

White-Westinghouse: WGF324BHWD

This is a partial list of verified sample models — not every model from these brands uses this igniter. Your model number is typically on a label inside the oven door frame, on the back panel of the range, or behind the storage drawer at the bottom. Not sure if this fits? Send us your model number and we'll confirm compatibility before you order.

Key Features

  • Genuine OEM Smart Choice flat-style silicon carbide hot-surface igniter
  • Amperage range 3.2–3.6 amps — matched to Electrolux/Frigidaire gas safety valves
  • Ceramic block base measures 1-1/2" with overall igniter length of approximately 3.72"
  • Includes mounting bracket and two ceramic wire nuts for installation
  • 17-1/2" bare wire leads for connection to the oven wiring harness
  • Universal fit across Frigidaire, Kenmore, Electrolux, Tappan, Gibson, White-Westinghouse, Crosley, and Kelvinator gas ranges

Product Specifications

Part Number 5304539804
Condition New
Brand Smart Choice
Part Type Flat Style Oven Igniter (Hot-Surface, Silicon Carbide)
Appliance Type Gas Range, Wall Oven, Microwave/Oven Combo
Material Silicon carbide element on ceramic base with metal mounting bracket
Igniter Length Approximately 3.72" (3-3/4")
Ceramic Block 1-1/2"
Wire Leads Approximately 17-1/2" bare leads, 2-wire
Amperage Range 3.2–3.6 amps
Includes Igniter with mounting bracket, 2 ceramic wire nuts, instruction sheet

Installation & Safety Notes

Gas Appliance Safety Warning
Disconnect the range from electrical power (unplug or switch off the circuit breaker) and turn off the gas supply valve behind the range before beginning any work. Do not touch the silicon carbide igniter element with bare hands — skin oils can create hot spots that cause the element to crack prematurely. Handle the igniter by its ceramic base and wire leads only. After installation, restore gas and power, then test the oven and check for gas leaks at all connections. If you smell gas at any point during the repair, turn off the gas supply, ventilate the area, and do not operate any electrical switches.

Frequently Asked Questions

How does a hot-surface igniter light the gas in an oven?
A hot-surface igniter does not use a spark. It is a silicon carbide resistive element wired in series with the oven's gas safety valve. When the oven control board sends power to the igniter, current flows through both the igniter and the valve's bimetal or coil actuator. As the igniter heats up, its resistance drops and the current in the circuit increases. When the current reaches the safety valve's rated threshold — typically between 3.2 and 3.6 amps — the valve opens and gas flows to the burner. The glowing igniter, now at approximately 2,000–2,500°F, lights the gas on contact. The igniter stays powered for the entire bake or broil cycle to hold the valve open. If power is interrupted or the igniter is removed, the valve closes immediately and gas stops flowing — this is the fundamental safety mechanism.
Why do oven igniters weaken gradually instead of failing all at once?
Silicon carbide is a ceramic material that undergoes thermal stress every time the oven cycles on and off. Each heating cycle expands and contracts the element, and over hundreds of cycles, microscopic cracks develop in the material. These cracks increase the element's electrical resistance, which reduces the current flowing through the circuit. The igniter still glows — sometimes brightly — but the amperage drops below the threshold needed to open the gas safety valve. This is why the most common early symptom is progressively longer preheat times rather than a sudden failure. The oven may work some days and not others, depending on ambient temperature and electrical conditions, until the element degrades enough that it consistently fails to reach threshold.
What is the difference between a flat style and a round style oven igniter?
Flat and round refer to the shape of the igniter element and its mounting configuration. The flat style — like the 5304539804 — has a rectangular silicon carbide bar mounted in an open cage bracket, typically about 1-1/2" of ceramic block length and 3-3/4" total length. It bolts to the oven burner assembly and connects via bare wire leads using ceramic wire nuts. The round style has a cylindrical coiled element, usually with a longer body and a plug-in connector rather than wire nuts. The two styles are not interchangeable — they have different mounting points, different amperage characteristics, and different connector types. Your oven was designed for one or the other based on the burner assembly and gas safety valve specification. Never substitute a round igniter for a flat one or vice versa, even if they physically appear to fit.
Why does the gas safety valve need the igniter to draw current before it will open?
The gas safety valve is designed so that gas can only flow when a proven ignition source is confirmed hot enough to light it. Rather than relying on a separate sensor to detect igniter temperature, the system uses the igniter itself as both the ignition source and the proof of ignition readiness. The igniter and safety valve are wired in series — the same current that heats the igniter also actuates the valve. When the igniter draws enough current (meaning it has reached a temperature high enough to reliably light gas), the valve opens. If the igniter is too weak, cracked, or disconnected, insufficient current flows and the valve stays closed. This design ensures that gas cannot reach the burner unless a hot enough ignition source is confirmed present — no separate interlock, timer, or sensor required.
Can this igniter be used for both the bake and the broil burner?
That depends on your specific model. Some gas ranges use the same flat-style igniter for both the bake (bottom) and broil (top) burners, while others use different igniter styles or lengths for each position. The 5304539804 is specified as a bake igniter replacement on most models, but Frigidaire uses the same basic flat igniter design across many positions. Check the parts diagram for your model number to confirm which igniter part number is specified for the bake position and which is specified for the broil position before ordering. Even if the igniters look identical, the mounting bracket orientation and wire lead length may differ between positions.
Genuine OEM Part Fast Shipping Easy Installation

Please verify your appliance model number before ordering.

Product form

5304539804 Universal Oven Flat Igniter

Online Shipped Price $40.00 List Price $35.00You Save: $5.00Delivered to your address
Store Walk-In
Discounted Price
$31.75Walk-In Savings: $3.25In-store purchase only — not valid for online checkout
! OUT OF STOCK
Currently unavailable Shipping is not available for this item right now.

Description

5304539804 Universal Oven Flat Igniter (Silicon Carbide Hot-Surface Igniter for Gas Ranges) — Genuine OEM

Product Description

The 5304539804 is a genuine OEM flat-style hot-surface igniter for gas ranges, wall ovens, and microwave/oven combos manufactured by Electrolux and its subsidiary brands. It uses a silicon carbide (SiC) heating element mounted on a ceramic base to ignite the oven burner. The igniter does not light the gas directly with a spark — it works by drawing electrical current through the oven's gas safety valve. When you turn the oven on, the control board sends 120V to the igniter, which begins to heat up and glow. As the silicon carbide element reaches operating temperature, its electrical resistance drops and the current flowing through the circuit rises. When that current reaches the gas safety valve's opening threshold — typically between 3.2 and 3.6 amps — the valve opens, gas flows to the burner, and the glowing igniter lights it. The igniter stays energized throughout the entire bake or broil cycle to keep the safety valve open.

This igniter fails gradually rather than all at once. Over hundreds of heating cycles, the silicon carbide element develops microscopic cracks from repeated thermal expansion and contraction. These cracks increase the element's electrical resistance, which reduces the current flowing through the circuit. Eventually the current drops below the safety valve's minimum opening threshold — the igniter still glows visibly, but it can no longer draw enough amperage to open the valve. This is why the most common symptom of a failing igniter is an oven that heats up normally sometimes but takes longer and longer to preheat, or an igniter that glows orange or red for several minutes without the burner ever lighting. By the time the igniter fails completely and won't glow at all, the element has cracked through entirely and lost electrical continuity.

Quick Answer

Is Your Oven Igniter the Problem?

A gas oven that won't heat at all, takes noticeably longer to preheat than it used to, or has an igniter that glows for more than 90 seconds without the burner lighting is showing symptoms commonly associated with a weakened or failed igniter. The igniter is the single most common cause of a gas oven not heating. Before replacing, confirm that the oven is receiving power (the clock and controls should be working), that the gas supply valve behind the range is fully open, and that you don't smell gas at the burner when the oven is turned on (a gas smell without ignition could indicate a different problem). If the igniter does not glow at all when the oven is turned on, verify power is reaching the igniter circuit — a tripped breaker, a failed oven control board, or a blown thermal fuse can also prevent the igniter from energizing. If the igniter glows but the oven won't heat, the igniter is the most likely cause.

Common Symptoms

  • Gas oven does not heat at all — igniter does not glow
  • Igniter glows orange or red but gas burner never lights
  • Oven takes significantly longer to preheat than it used to
  • Igniter glows for more than 90 seconds without igniting the burner
  • Oven heats intermittently — works sometimes but not others
  • Little to no heat when baking despite oven being turned on

Replaces Part Numbers

The 5304539804 is a Smart Choice branded genuine OEM universal flat oven igniter that serves as a direct replacement across a wide range of Electrolux/Frigidaire gas ranges, wall ovens, and microwave/oven combos. It supersedes and replaces the following part and catalog numbers.

5304539804 replaces 5303935066, 318177710, 5304515072, 318177720, 08009420, 08013883, 08067971, 10064, 10222, 12872, 3131090, 3131300, 316030600, 316428600, 316T031P01, 316T031P02, 3203706, 41-204, 5303131300, 5303207520, 5303207521, 5303210788, 5303308452, 5303308468, 5303937521, 5308009420, 54099H05, 7318177710, 8009420, AH470129, AP00205013, AP205013, AP205016, EA470129, F16-747, F17-038, F17-039, GR411, IGN-4, IGN-5, IGN-8, IGN5, P205013, P205016, P205034, AFR17138, AP2150412, EAP470129, PD00000105, PS470129

Compatibility & Model Cross Reference

This genuine OEM igniter fits select Electrolux-manufactured gas ranges, wall ovens, and microwave/oven combos. It is a universal flat-style igniter designed to work across multiple brand families under the Electrolux umbrella. Always confirm your specific model number against the manufacturer's parts diagram before ordering.

Frigidaire: FFGF3054TS, FGGF3036TF, FGF368GCA, FFGF3052TS, FFLF3047LS

Kenmore: 790.70113700, 790.71313700, 790.36903900

Electrolux: EW30GF65GS, EI30GF45QS

Tappan: TGF317ESA, TGF336ASD

Gibson: GGF3032KB

White-Westinghouse: WGF324BHWD

This is a partial list of verified sample models — not every model from these brands uses this igniter. Your model number is typically on a label inside the oven door frame, on the back panel of the range, or behind the storage drawer at the bottom. Not sure if this fits? Send us your model number and we'll confirm compatibility before you order.

Key Features

  • Genuine OEM Smart Choice flat-style silicon carbide hot-surface igniter
  • Amperage range 3.2–3.6 amps — matched to Electrolux/Frigidaire gas safety valves
  • Ceramic block base measures 1-1/2" with overall igniter length of approximately 3.72"
  • Includes mounting bracket and two ceramic wire nuts for installation
  • 17-1/2" bare wire leads for connection to the oven wiring harness
  • Universal fit across Frigidaire, Kenmore, Electrolux, Tappan, Gibson, White-Westinghouse, Crosley, and Kelvinator gas ranges

Product Specifications

Part Number 5304539804
Condition New
Brand Smart Choice
Part Type Flat Style Oven Igniter (Hot-Surface, Silicon Carbide)
Appliance Type Gas Range, Wall Oven, Microwave/Oven Combo
Material Silicon carbide element on ceramic base with metal mounting bracket
Igniter Length Approximately 3.72" (3-3/4")
Ceramic Block 1-1/2"
Wire Leads Approximately 17-1/2" bare leads, 2-wire
Amperage Range 3.2–3.6 amps
Includes Igniter with mounting bracket, 2 ceramic wire nuts, instruction sheet

Installation & Safety Notes

Gas Appliance Safety Warning
Disconnect the range from electrical power (unplug or switch off the circuit breaker) and turn off the gas supply valve behind the range before beginning any work. Do not touch the silicon carbide igniter element with bare hands — skin oils can create hot spots that cause the element to crack prematurely. Handle the igniter by its ceramic base and wire leads only. After installation, restore gas and power, then test the oven and check for gas leaks at all connections. If you smell gas at any point during the repair, turn off the gas supply, ventilate the area, and do not operate any electrical switches.

Frequently Asked Questions

How does a hot-surface igniter light the gas in an oven?
A hot-surface igniter does not use a spark. It is a silicon carbide resistive element wired in series with the oven's gas safety valve. When the oven control board sends power to the igniter, current flows through both the igniter and the valve's bimetal or coil actuator. As the igniter heats up, its resistance drops and the current in the circuit increases. When the current reaches the safety valve's rated threshold — typically between 3.2 and 3.6 amps — the valve opens and gas flows to the burner. The glowing igniter, now at approximately 2,000–2,500°F, lights the gas on contact. The igniter stays powered for the entire bake or broil cycle to hold the valve open. If power is interrupted or the igniter is removed, the valve closes immediately and gas stops flowing — this is the fundamental safety mechanism.
Why do oven igniters weaken gradually instead of failing all at once?
Silicon carbide is a ceramic material that undergoes thermal stress every time the oven cycles on and off. Each heating cycle expands and contracts the element, and over hundreds of cycles, microscopic cracks develop in the material. These cracks increase the element's electrical resistance, which reduces the current flowing through the circuit. The igniter still glows — sometimes brightly — but the amperage drops below the threshold needed to open the gas safety valve. This is why the most common early symptom is progressively longer preheat times rather than a sudden failure. The oven may work some days and not others, depending on ambient temperature and electrical conditions, until the element degrades enough that it consistently fails to reach threshold.
What is the difference between a flat style and a round style oven igniter?
Flat and round refer to the shape of the igniter element and its mounting configuration. The flat style — like the 5304539804 — has a rectangular silicon carbide bar mounted in an open cage bracket, typically about 1-1/2" of ceramic block length and 3-3/4" total length. It bolts to the oven burner assembly and connects via bare wire leads using ceramic wire nuts. The round style has a cylindrical coiled element, usually with a longer body and a plug-in connector rather than wire nuts. The two styles are not interchangeable — they have different mounting points, different amperage characteristics, and different connector types. Your oven was designed for one or the other based on the burner assembly and gas safety valve specification. Never substitute a round igniter for a flat one or vice versa, even if they physically appear to fit.
Why does the gas safety valve need the igniter to draw current before it will open?
The gas safety valve is designed so that gas can only flow when a proven ignition source is confirmed hot enough to light it. Rather than relying on a separate sensor to detect igniter temperature, the system uses the igniter itself as both the ignition source and the proof of ignition readiness. The igniter and safety valve are wired in series — the same current that heats the igniter also actuates the valve. When the igniter draws enough current (meaning it has reached a temperature high enough to reliably light gas), the valve opens. If the igniter is too weak, cracked, or disconnected, insufficient current flows and the valve stays closed. This design ensures that gas cannot reach the burner unless a hot enough ignition source is confirmed present — no separate interlock, timer, or sensor required.
Can this igniter be used for both the bake and the broil burner?
That depends on your specific model. Some gas ranges use the same flat-style igniter for both the bake (bottom) and broil (top) burners, while others use different igniter styles or lengths for each position. The 5304539804 is specified as a bake igniter replacement on most models, but Frigidaire uses the same basic flat igniter design across many positions. Check the parts diagram for your model number to confirm which igniter part number is specified for the bake position and which is specified for the broil position before ordering. Even if the igniters look identical, the mounting bracket orientation and wire lead length may differ between positions.
Genuine OEM Part Fast Shipping Easy Installation

Please verify your appliance model number before ordering.

5304539804, 5303935066, 318177710, 5304515072, 318177720, 08009420, 08013883, 08067971, 10064, 10222, 12872, 3131090, 3131300, 316030600, 316428600, 316T031P01, 316T031P02, 3203706, 41-204, 5303131300, 5303207520, 5303207521, 5303210788, 5303308452, 5303308468, 5303937521, 5308009420, 54099H05, 7318177710, 8009420, AH470129, AP00205013, AP205013, AP205016, EA470129, F16-747, F17-038, F17-039, GR411, IGN-4, IGN-5, IGN-8, IGN5, P205013, P205016, P205034, AFR17138, AP2150412, EAP470129, PD00000105, PS470129.

Recently viewed products

© 2026 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Need Help? Call Us Now +1 (855) 200-8978 CONTACT US
    5304539804 Universal Oven Flat Igniter
    5304539804 Universal Oven Flat Igniter
    $40.00 $35.00