661570V Dryer Genuine OEM Drum Belt

Description

661570V Dryer Drum Drive Belt — Genuine OEM

The 661570V is a genuine OEM dryer drum drive belt manufactured by Whirlpool. It is a multi-rib flat belt that wraps around the outside of the dryer drum, loops under the idler pulley, and connects to the motor pulley. When the motor spins, the belt transfers that rotation to the drum — it is the only connection between the motor and the drum. The belt is 93-1/2 inches long, 1/4 inch wide, and has 4 ribs with 3 grooves on its flat side. The ribbed side faces the drum surface for grip, while the smooth side contacts the idler and motor pulleys.

Dryer drum belts fail in one of two ways: they snap or they stretch. A snapped belt is an immediate failure — the motor runs but the drum does not turn at all. A stretched belt is a gradual failure — the drum may still turn but slips under load, causing thumping noises as the belt loses and regains grip on the drum surface. In some cases a worn belt develops glazed or cracked ribs that squeal during startup before the drum reaches full speed. Once the belt has stretched past the idler pulley's ability to maintain tension, or the ribs have worn smooth, the belt must be replaced — it cannot be tightened or adjusted.

QUICK ANSWER
Will This Fix Your Dryer?

If your Whirlpool, Kenmore, Maytag, or KitchenAid dryer motor runs but the drum does not spin — or the drum thumps, squeals, and slips during tumbling — the drum belt has broken or worn out. The 661570V is the genuine OEM replacement. It wraps around the drum, loops under the idler pulley, and connects to the motor pulley. Installation takes 30 to 60 minutes and requires removing the top and front panels to access the drum.

Common Symptoms
  • Motor runs but the drum does not spin
  • Drum will not tumble — clothes stay in a pile at the bottom
  • Thumping or rhythmic slapping noise during the drying cycle
  • Squealing noise at startup that fades as the drum speeds up
  • Dryer shuts off shortly after starting (broken belt triggers door switch interlock on some models)
Cross Reference Information

The 661570V is Whirlpool's current part number for this dryer drum drive belt. It supersedes the earlier 661570 and 3387610 and is cross-referenced under the following distributor catalog numbers.

661570V replaces 661570, 3387610, 339728, 4248258, 661570VP, AP5983729, AWP761693, EAP382430, FIX382430, PD00023608, PS11722115

COMPATIBILITY

This genuine OEM drum belt fits a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, and Magic Chef dryers and washer/dryer combos. Whirlpool uses this belt across many 27-inch and 29-inch dryer platforms. Confirm your model number before ordering.

Compatible brands: Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, Magic Chef

Key Features
  • Genuine OEM Whirlpool dryer drum drive belt — factory original, not aftermarket
  • 93-1/2 inches long, 1/4 inch wide — multi-rib flat belt design
  • 4 ribs with 3 grooves for positive drum grip
  • High-strength rubber construction resists stretching and heat fatigue
  • Routes around the drum, under the idler pulley, and onto the motor pulley
  • Moderate installation — 30 to 60 minutes with basic hand tools
Specifications
Part Number 661570V
Condition New
Brand Whirlpool
Part Type Dryer Drum Drive Belt
Appliance Type Dryer / Washer Dryer Combo
Belt Length 93-1/2 inches
Belt Width 1/4 inch
Ribs 4 ribs / 3 grooves
Material Rubber
Color Black
Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and others
Supersedes 661570, 3387610
Safety Warning
Unplug the dryer or shut off the circuit breaker before beginning any work. For gas dryers, also close the gas supply valve behind the unit before disconnecting power. The top panel, front panel, and drum must be partially or fully removed to access the belt path. Disconnect the door switch wiring harness before removing the front panel. Support the drum when the front panel is off to prevent it from dropping forward. When routing the new belt, the ribbed side faces the drum and the smooth side rides on the idler and motor pulleys. Confirm the belt is centered on the drum and seated in the idler pulley groove before reassembling.
Frequently Asked Questions
How does the dryer drum belt work and why does it fail?
The belt wraps around the full circumference of the drum, loops down under a spring-loaded idler pulley, and connects to the motor pulley. The idler pulley keeps constant tension on the belt so it grips the drum without slipping. Over years of heat cycling and mechanical stress, the rubber loses elasticity and the ribs wear down. Eventually the belt either snaps — causing the drum to stop turning instantly — or stretches past the point where the idler can compensate, causing the drum to slip and thump. Heat is the main accelerator: dryers that run with restricted airflow (clogged lint screens or blocked vents) operate at higher internal temperatures, which degrades the belt rubber faster.
The motor runs but the drum does not turn. Is the belt definitely broken?
In most cases, yes. The belt is the only mechanical link between the motor and the drum. If the motor hums and runs normally but the drum does not rotate at all, the belt has almost certainly snapped. You can confirm by opening the top panel and looking at the drum — if the belt is not wrapped around it, or you see the broken belt lying in the bottom of the cabinet, that is your answer. In rare cases a seized drum roller or a jammed drum bearing can prevent the drum from turning even with an intact belt, but the motor will usually stall and trip the thermal overload before running freely in that scenario.
Should I replace the idler pulley and drum rollers at the same time?
It is good practice. The belt, idler pulley, and drum support rollers all wear together over the life of the dryer, and accessing any one of them requires the same disassembly. If the belt has broken or worn out after years of use, the idler pulley spring may have weakened and the drum rollers may be flat-spotted or noisy. Whirlpool sells a repair kit (part number 4392067) that includes the 661570V belt, four drum rollers, the idler assembly, tri-rings, and a washer — everything you need to rebuild the drive and support system in one repair session.
What is the difference between the 661570V and the 341241 belt?
Both are genuine Whirlpool dryer drum belts, but they are different sizes for different dryer platforms. The 661570V is 93-1/2 inches long with 4 ribs and 3 grooves. The 341241 is 92-1/4 inches long with a similar rib profile. They are not interchangeable — the length difference means the wrong belt will either be too tight (risking motor strain and premature failure) or too loose (causing slipping and thumping). Check your model number to confirm which belt your dryer requires.
Which way does the ribbed side face when routing the belt?
The ribbed (grooved) side of the belt faces inward against the drum surface. This is the high-friction side that grips the drum to prevent slipping. The smooth side of the belt rides on the idler pulley and the motor pulley. If the belt is installed with the ribbed side facing out, it will slip on the drum surface and the dryer will not tumble properly — you may hear squealing and see the drum rotating intermittently or not at all. When routing the belt, wrap it around the drum with the ribs touching the drum, then loop it under the idler and around the motor shaft with the smooth side on the pulleys.
Genuine OEM Part Fast Shipping In Stock 30–60 Minute Install
Product form

661570V Dryer Genuine OEM Drum Belt

Free Pickup in In Stock Parts-O-Matic - WB Store 1820 Featherstone Road Woodbridge, VA 22191 Usually ready in 1 hour
Online Shipped Price $32.00 List Price $24.97You Save: $7.03Delivered to your address
Store Walk-In
Discounted Price
$14.65Walk-In Savings: $10.32In-store purchase only — not valid for online checkout
✓ IN STOCK
Ships Today if ordered within --:--:--
Free Pickup in our Store • Usually ready in 1 hour
  • Shipped today? Order within: Nov 21, 2026 14:00:00 -0500

Description

661570V Dryer Drum Drive Belt — Genuine OEM

The 661570V is a genuine OEM dryer drum drive belt manufactured by Whirlpool. It is a multi-rib flat belt that wraps around the outside of the dryer drum, loops under the idler pulley, and connects to the motor pulley. When the motor spins, the belt transfers that rotation to the drum — it is the only connection between the motor and the drum. The belt is 93-1/2 inches long, 1/4 inch wide, and has 4 ribs with 3 grooves on its flat side. The ribbed side faces the drum surface for grip, while the smooth side contacts the idler and motor pulleys.

Dryer drum belts fail in one of two ways: they snap or they stretch. A snapped belt is an immediate failure — the motor runs but the drum does not turn at all. A stretched belt is a gradual failure — the drum may still turn but slips under load, causing thumping noises as the belt loses and regains grip on the drum surface. In some cases a worn belt develops glazed or cracked ribs that squeal during startup before the drum reaches full speed. Once the belt has stretched past the idler pulley's ability to maintain tension, or the ribs have worn smooth, the belt must be replaced — it cannot be tightened or adjusted.

QUICK ANSWER
Will This Fix Your Dryer?

If your Whirlpool, Kenmore, Maytag, or KitchenAid dryer motor runs but the drum does not spin — or the drum thumps, squeals, and slips during tumbling — the drum belt has broken or worn out. The 661570V is the genuine OEM replacement. It wraps around the drum, loops under the idler pulley, and connects to the motor pulley. Installation takes 30 to 60 minutes and requires removing the top and front panels to access the drum.

Common Symptoms
  • Motor runs but the drum does not spin
  • Drum will not tumble — clothes stay in a pile at the bottom
  • Thumping or rhythmic slapping noise during the drying cycle
  • Squealing noise at startup that fades as the drum speeds up
  • Dryer shuts off shortly after starting (broken belt triggers door switch interlock on some models)
Cross Reference Information

The 661570V is Whirlpool's current part number for this dryer drum drive belt. It supersedes the earlier 661570 and 3387610 and is cross-referenced under the following distributor catalog numbers.

661570V replaces 661570, 3387610, 339728, 4248258, 661570VP, AP5983729, AWP761693, EAP382430, FIX382430, PD00023608, PS11722115

COMPATIBILITY

This genuine OEM drum belt fits a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, and Magic Chef dryers and washer/dryer combos. Whirlpool uses this belt across many 27-inch and 29-inch dryer platforms. Confirm your model number before ordering.

Compatible brands: Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, Magic Chef

Key Features
  • Genuine OEM Whirlpool dryer drum drive belt — factory original, not aftermarket
  • 93-1/2 inches long, 1/4 inch wide — multi-rib flat belt design
  • 4 ribs with 3 grooves for positive drum grip
  • High-strength rubber construction resists stretching and heat fatigue
  • Routes around the drum, under the idler pulley, and onto the motor pulley
  • Moderate installation — 30 to 60 minutes with basic hand tools
Specifications
Part Number 661570V
Condition New
Brand Whirlpool
Part Type Dryer Drum Drive Belt
Appliance Type Dryer / Washer Dryer Combo
Belt Length 93-1/2 inches
Belt Width 1/4 inch
Ribs 4 ribs / 3 grooves
Material Rubber
Color Black
Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and others
Supersedes 661570, 3387610
Safety Warning
Unplug the dryer or shut off the circuit breaker before beginning any work. For gas dryers, also close the gas supply valve behind the unit before disconnecting power. The top panel, front panel, and drum must be partially or fully removed to access the belt path. Disconnect the door switch wiring harness before removing the front panel. Support the drum when the front panel is off to prevent it from dropping forward. When routing the new belt, the ribbed side faces the drum and the smooth side rides on the idler and motor pulleys. Confirm the belt is centered on the drum and seated in the idler pulley groove before reassembling.
Frequently Asked Questions
How does the dryer drum belt work and why does it fail?
The belt wraps around the full circumference of the drum, loops down under a spring-loaded idler pulley, and connects to the motor pulley. The idler pulley keeps constant tension on the belt so it grips the drum without slipping. Over years of heat cycling and mechanical stress, the rubber loses elasticity and the ribs wear down. Eventually the belt either snaps — causing the drum to stop turning instantly — or stretches past the point where the idler can compensate, causing the drum to slip and thump. Heat is the main accelerator: dryers that run with restricted airflow (clogged lint screens or blocked vents) operate at higher internal temperatures, which degrades the belt rubber faster.
The motor runs but the drum does not turn. Is the belt definitely broken?
In most cases, yes. The belt is the only mechanical link between the motor and the drum. If the motor hums and runs normally but the drum does not rotate at all, the belt has almost certainly snapped. You can confirm by opening the top panel and looking at the drum — if the belt is not wrapped around it, or you see the broken belt lying in the bottom of the cabinet, that is your answer. In rare cases a seized drum roller or a jammed drum bearing can prevent the drum from turning even with an intact belt, but the motor will usually stall and trip the thermal overload before running freely in that scenario.
Should I replace the idler pulley and drum rollers at the same time?
It is good practice. The belt, idler pulley, and drum support rollers all wear together over the life of the dryer, and accessing any one of them requires the same disassembly. If the belt has broken or worn out after years of use, the idler pulley spring may have weakened and the drum rollers may be flat-spotted or noisy. Whirlpool sells a repair kit (part number 4392067) that includes the 661570V belt, four drum rollers, the idler assembly, tri-rings, and a washer — everything you need to rebuild the drive and support system in one repair session.
What is the difference between the 661570V and the 341241 belt?
Both are genuine Whirlpool dryer drum belts, but they are different sizes for different dryer platforms. The 661570V is 93-1/2 inches long with 4 ribs and 3 grooves. The 341241 is 92-1/4 inches long with a similar rib profile. They are not interchangeable — the length difference means the wrong belt will either be too tight (risking motor strain and premature failure) or too loose (causing slipping and thumping). Check your model number to confirm which belt your dryer requires.
Which way does the ribbed side face when routing the belt?
The ribbed (grooved) side of the belt faces inward against the drum surface. This is the high-friction side that grips the drum to prevent slipping. The smooth side of the belt rides on the idler pulley and the motor pulley. If the belt is installed with the ribbed side facing out, it will slip on the drum surface and the dryer will not tumble properly — you may hear squealing and see the drum rotating intermittently or not at all. When routing the belt, wrap it around the drum with the ribs touching the drum, then loop it under the idler and around the motor shaft with the smooth side on the pulleys.
Genuine OEM Part Fast Shipping In Stock 30–60 Minute Install
661570V, 661570, 3387610, 339728, 4248258, 661570VP, AP5983729, AWP761693, EAP382430, FIX382430, PD00023608, PS11722115

Recently viewed products

© 2026 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Need Help? Call Us Now +1 (855) 200-8978 CONTACT US
    661570V Dryer Genuine OEM Drum Belt
    661570V Dryer Genuine OEM Drum Belt
    $32.00 $24.97