ERP IG21 Oven Flat Igniter with Harness - Compatible with GE, Hotpoint, Kenmore Ranges
Product Description
Revive your gas oven’s performance with the IG21 Oven Flat Igniter with Harness from Parts-O-Matic. This high-quality aftermarket flat-style igniter, designed for hot surface ignition systems, replaces the GE WB13K21 and other part numbers, ensuring reliable ignition for select GE, Hotpoint, and Kenmore gas ranges. Featuring an 8-inch lead wire, a 1.5-inch ceramic block, and a male/female two-pin quick disconnect, it draws 3.4–3.6 amps to open the oven safety valve and ignite the gas burner. It’s a cost-effective solution for ovens that won’t start, heat unevenly, or emit a gas smell without igniting. Handle with care to avoid damaging the fragile silicon carbide element. Enjoy fast and free shipping on all orders at Parts-O-Matic!
Replaces part numbers: WB13K21, 2494, AH231280, EA231280, WB13K0012, WB13K0013, WB13K0014, WB13K10009, WB13K10026, WB13K12, WB13K13, WB13K14, AP2020569, PS231280.
Compatibility:
Compatible with models including but not limited to:
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
-
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, and Kenmore gas range models.
-
🔥 Specifications: Flat-style igniter with 8" lead wire, 1.5" ceramic block, male/female two-pin quick disconnect, draws 3.4–3.6 amps for reliable ignition. 8" lead wire 1-1/2"ceramic block Includes male/female two pin quick disconnect.
-
💰 Cost-Effective Alternative: This replacement part offers OEM-equivalent performance at a lower price.
-
🛠️ Easy Installation: Includes harness with male/female two-pin quick disconnect; requires a Phillips screwdriver, socket set, and wire splicing tools; typically installed in 15–20 minutes.
-
🛡️ Reliable Fixes: Resolves common issues like no ignition, uneven heating, gas smell, or oven not starting.
Installation Notes:
-
Tools Needed: Phillips screwdriver, small socket set or nut driver, needle-nose pliers, wire splicing tool.
-
Safety First: Disconnect power and shut off the gas valve before installation.
-
Handle with Care: Avoid touching the silicon carbide element with bare hands, as oils can shorten the igniter’s lifespan.
-
Installation Steps: Remove oven racks and bottom panel (2 screws at rear). Unplug the igniter from the wire harness (accessible via the rear panel or drawer area). Remove the igniter (2 screws), pulling wires through. If the connector doesn’t match, cut and splice wires using ceramic wire nuts (not included). Install the new igniter, reassemble, and tuck excess wires near the gas safety valve to avoid heat exposure. Note: Some users report fused screws; a Dremel tool may be needed to cut them.
Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your gas range back to perfect performance today!
Add to cart now for a budget-friendly fix with fast and free shipping on your entire order!
