W10909685 Dryer Genuine OEM Thermal Fuse

Description

W10909685 Dryer Thermal Fuse — Genuine OEM Whirlpool Part

The W10909685 is a genuine OEM thermal fuse manufactured by Whirlpool for use in Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis dryers. Mounted on the blower housing, this non-resettable safety device opens the circuit when exhaust temperatures exceed 195°F, shutting down the dryer to prevent overheating and potential fire. A blown thermal fuse is the single most common reason a dryer stops heating or refuses to start altogether.

In nearly every case, a blown thermal fuse points to restricted airflow somewhere in the venting system. Crushed transition hoses, lint-packed exhaust ducts, and blocked exterior vent hoods force the dryer to recirculate hot air until the blower housing temperature trips the fuse. Installing a new W10909685 without clearing the restriction will result in the replacement fuse blowing in short order. Always inspect and clean the full vent path — from the lint trap housing through the exterior hood — before powering the dryer back on.

QUICK ANSWER

Will This Fix Your Dryer?

If your dryer won't start, runs but produces no heat, or shuts off mid-cycle, a blown thermal fuse is the most likely cause. The W10909685 thermal fuse restores the safety circuit so the dryer can operate normally again. Test the existing fuse with a multimeter set to continuity — a reading of no continuity (open circuit) confirms the fuse has blown and this replacement will resolve the issue.

Common Symptoms

  • Dryer does not start at all
  • Dryer runs but produces no heat
  • Dryer shuts off before the cycle finishes
  • Thermal fuse tests open with a multimeter (no continuity)
  • Burning smell noticed before dryer stopped working

Cross Reference Information

The W10909685 replaces the following part numbers. If you find any of these numbers on your existing part or in your owner's manual, this is the correct replacement.

W10909685, 4461025, G4AP0506, TF 091C ACA2, W10693363, AP6034383, AWP42948, EAP11766766, FIX11766766, PD00036363, PS11766766
COMPATIBILITY

This thermal fuse fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis dryers — both gas and electric models. Always verify your model number before ordering.

Sample compatible models: WED5620HW1, WED8500DC1, WED5100HC0, MGD3500FW0, NED5800HW1, NGD5800HW1, MGD6630HC3, WGD8620HC0, WGD9620HC3, MED6230RHW

Key Features

  • Genuine OEM Whirlpool thermal fuse — exact factory specification
  • Non-resettable 195°F safety cutoff protects against dryer overheating
  • Mounts directly to the blower housing with no modification required
  • Compatible with both gas and electric dryer platforms
  • Replaces previous part number W10693363
  • Direct drop-in replacement — matches original connector and mounting points

Specifications

Part Number W10909685
OEM Part Number W10909685
Condition New
Brand Whirlpool
Part Type Thermal Fuse
Appliance Type Dryer
Temperature Rating 195°F
Location Blower Housing
Color White
Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis
Replaces W10693363
Safety Warning
Never bypass a thermal fuse with a jumper wire. The fuse exists to prevent dryer fires caused by overheating. A blown fuse almost always indicates restricted airflow — inspect and clean the entire vent system from the lint trap to the exterior hood before operating the dryer with a new fuse installed. Failure to clear the restriction will cause the replacement fuse to blow again and may create a fire hazard.

Frequently Asked Questions

Why did my dryer's thermal fuse blow?
The most common cause is restricted airflow through the dryer's venting system. Lint buildup inside the exhaust duct, a crushed or kinked transition hose, or a blocked exterior vent hood forces hot air to recirculate inside the dryer. This raises the temperature at the blower housing until it exceeds the fuse's 195°F rating. Less commonly, a failed cycling thermostat or a malfunctioning heating element can produce the same result.
Can a thermal fuse be reset?
No. The W10909685 is a non-resettable thermal fuse. Once it trips, the internal element breaks permanently and the fuse must be replaced. This is by design — a one-time-use fuse guarantees the dryer shuts down and stays off until the underlying problem is addressed rather than cycling back on into an unsafe condition.
My dryer runs but there is no heat — could it be the thermal fuse?
Yes. On electric dryers, a blown thermal fuse can cut power to the heating element while the drum motor continues running. On some gas models, the fuse may disable the gas valve ignition circuit. To confirm, remove the fuse and test it with a multimeter set to continuity — the reading should be near zero ohms. If the meter shows no continuity (open circuit), the fuse has blown and needs replacement.
How do I keep the new thermal fuse from blowing again?
Before installing the new fuse, clean the entire vent path. Disconnect the duct from the back of the dryer and clear it with a vent brush or leaf blower. Check the transition hose for kinks or crushing. Inspect the exterior vent hood for blockage, bird nests, or a stuck damper flap. Going forward, clean the lint screen before every load and have the full duct system cleaned at least once a year.
Does this thermal fuse fit both gas and electric dryers?
Yes. The W10909685 mounts on the blower housing, which is a shared component across Whirlpool's gas and electric dryer platforms. It functions the same way in both — monitoring exhaust temperature and breaking the circuit if it exceeds 195°F. The wiring harness connector and mounting bracket are identical between gas and electric models that use this part number.
Genuine OEM Part Fast Shipping In Stock 30–60 Min Install
Product form

W10909685 Dryer Genuine OEM Thermal Fuse

Online Shipped Price $82.00 List Price $54.20You Save: $27.80Delivered to your address
Store Walk-In
Discounted Price
$49.88Walk-In Savings: $4.32In-store purchase only — not valid for online checkout
! OUT OF STOCK
Currently unavailable Shipping is not available for this item right now.

Description

W10909685 Dryer Thermal Fuse — Genuine OEM Whirlpool Part

The W10909685 is a genuine OEM thermal fuse manufactured by Whirlpool for use in Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis dryers. Mounted on the blower housing, this non-resettable safety device opens the circuit when exhaust temperatures exceed 195°F, shutting down the dryer to prevent overheating and potential fire. A blown thermal fuse is the single most common reason a dryer stops heating or refuses to start altogether.

In nearly every case, a blown thermal fuse points to restricted airflow somewhere in the venting system. Crushed transition hoses, lint-packed exhaust ducts, and blocked exterior vent hoods force the dryer to recirculate hot air until the blower housing temperature trips the fuse. Installing a new W10909685 without clearing the restriction will result in the replacement fuse blowing in short order. Always inspect and clean the full vent path — from the lint trap housing through the exterior hood — before powering the dryer back on.

QUICK ANSWER

Will This Fix Your Dryer?

If your dryer won't start, runs but produces no heat, or shuts off mid-cycle, a blown thermal fuse is the most likely cause. The W10909685 thermal fuse restores the safety circuit so the dryer can operate normally again. Test the existing fuse with a multimeter set to continuity — a reading of no continuity (open circuit) confirms the fuse has blown and this replacement will resolve the issue.

Common Symptoms

  • Dryer does not start at all
  • Dryer runs but produces no heat
  • Dryer shuts off before the cycle finishes
  • Thermal fuse tests open with a multimeter (no continuity)
  • Burning smell noticed before dryer stopped working

Cross Reference Information

The W10909685 replaces the following part numbers. If you find any of these numbers on your existing part or in your owner's manual, this is the correct replacement.

W10909685, 4461025, G4AP0506, TF 091C ACA2, W10693363, AP6034383, AWP42948, EAP11766766, FIX11766766, PD00036363, PS11766766
COMPATIBILITY

This thermal fuse fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Inglis dryers — both gas and electric models. Always verify your model number before ordering.

Sample compatible models: WED5620HW1, WED8500DC1, WED5100HC0, MGD3500FW0, NED5800HW1, NGD5800HW1, MGD6630HC3, WGD8620HC0, WGD9620HC3, MED6230RHW

Key Features

  • Genuine OEM Whirlpool thermal fuse — exact factory specification
  • Non-resettable 195°F safety cutoff protects against dryer overheating
  • Mounts directly to the blower housing with no modification required
  • Compatible with both gas and electric dryer platforms
  • Replaces previous part number W10693363
  • Direct drop-in replacement — matches original connector and mounting points

Specifications

Part Number W10909685
OEM Part Number W10909685
Condition New
Brand Whirlpool
Part Type Thermal Fuse
Appliance Type Dryer
Temperature Rating 195°F
Location Blower Housing
Color White
Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis
Replaces W10693363
Safety Warning
Never bypass a thermal fuse with a jumper wire. The fuse exists to prevent dryer fires caused by overheating. A blown fuse almost always indicates restricted airflow — inspect and clean the entire vent system from the lint trap to the exterior hood before operating the dryer with a new fuse installed. Failure to clear the restriction will cause the replacement fuse to blow again and may create a fire hazard.

Frequently Asked Questions

Why did my dryer's thermal fuse blow?
The most common cause is restricted airflow through the dryer's venting system. Lint buildup inside the exhaust duct, a crushed or kinked transition hose, or a blocked exterior vent hood forces hot air to recirculate inside the dryer. This raises the temperature at the blower housing until it exceeds the fuse's 195°F rating. Less commonly, a failed cycling thermostat or a malfunctioning heating element can produce the same result.
Can a thermal fuse be reset?
No. The W10909685 is a non-resettable thermal fuse. Once it trips, the internal element breaks permanently and the fuse must be replaced. This is by design — a one-time-use fuse guarantees the dryer shuts down and stays off until the underlying problem is addressed rather than cycling back on into an unsafe condition.
My dryer runs but there is no heat — could it be the thermal fuse?
Yes. On electric dryers, a blown thermal fuse can cut power to the heating element while the drum motor continues running. On some gas models, the fuse may disable the gas valve ignition circuit. To confirm, remove the fuse and test it with a multimeter set to continuity — the reading should be near zero ohms. If the meter shows no continuity (open circuit), the fuse has blown and needs replacement.
How do I keep the new thermal fuse from blowing again?
Before installing the new fuse, clean the entire vent path. Disconnect the duct from the back of the dryer and clear it with a vent brush or leaf blower. Check the transition hose for kinks or crushing. Inspect the exterior vent hood for blockage, bird nests, or a stuck damper flap. Going forward, clean the lint screen before every load and have the full duct system cleaned at least once a year.
Does this thermal fuse fit both gas and electric dryers?
Yes. The W10909685 mounts on the blower housing, which is a shared component across Whirlpool's gas and electric dryer platforms. It functions the same way in both — monitoring exhaust temperature and breaking the circuit if it exceeds 195°F. The wiring harness connector and mounting bracket are identical between gas and electric models that use this part number.
Genuine OEM Part Fast Shipping In Stock 30–60 Min Install
W10909685, 4461025, G4AP0506, TF 091C ACA2, W10693363, AP6034383, AWP42948, EAP11766766, FIX11766766, PD00036363, PS11766766

Recently viewed products

© 2026 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Need Help? Call Us Now +1 (855) 200-8978 CONTACT US
    W10909685 Dryer Genuine OEM Thermal Fuse
    W10909685 Dryer Genuine OEM Thermal Fuse
    $82.00 $54.20