WB03X43926 Genuine OEM GE Range Surface Burner Control Knob Set
The WB03X43926 is a genuine GE OEM surface burner knob kit, including 5 stainless steel knobs for GE, Hotpoint, Haier, Monogram, and Café ranges. These are the knobs you turn to light and adjust each surface burner — each one fits onto a control shaft behind the panel, and its position controls the heat setting for that burner. Since this kit includes a full set of five, it's designed for replacing every burner knob on the range at once rather than mismatching a single new knob against several older, worn ones.
Over years of use, the finish on plastic-coated or stainless-finished knobs can crack, peel, or start to bubble, and the knobs themselves can become loose or worn at the point where they grip the control shaft. A full-set replacement gives your range a uniform, refreshed look while also resolving any individual knobs that have become difficult to turn or read. Weighing approximately 2.64 oz total, this kit requires no tools to install — each knob simply pulls straight off its post and the new one presses straight back on. It directly replaces AP7187858, WB03K10305, WB03K10303, WB03K10208, WB03K10221, and WB03K10294.
Quick Answer
The WB03X43926 Genuine OEM GE Range Surface Burner Control Knob Set fixes GE, Hotpoint, Haier, Monogram, and Café ranges with burner knobs that are cracked, peeling, bubbling, loose, or simply worn-looking after years of use. Set of 5 stainless steel knobs. Replaces AP7187858, WB03K10305, WB03K10303, WB03K10208, WB03K10221, WB03K10294. No tools required — each knob pulls straight off and the new one presses straight on.
Common Problems This Part Fixes
- Burner knobs with cracked, peeling, or bubbling finish
- Knobs that feel loose or wobbly on the control shaft
- Knobs that are hard to read due to worn or faded markings
- Mismatched or inconsistent-looking knobs across the range from replacing them one at a time
- Knobs that have become difficult to turn smoothly
- General wear after many years of daily cooking use
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range surface burner knob set directly replaces the following OEM and cross-reference part numbers:
WB03X43926, WB03K10303, WB03K10305, WB03K10208, WB03K10221, WB03K10294, AP7187858, OEM21563583, AGE21567, PD00074146
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This burner knob set is compatible with select GE ranges, and also fits select Hotpoint, Haier, Monogram, and Café ranges built on the GE platform.
Note: This is the stainless steel finish knob set. GE also sells a visually different black plastic knob (WB03T10236) for other range models — the two are not interchangeable, so confirm your original knob's finish and shaft style before ordering. Always verify your full model number before ordering, since GE uses several different knob designs across its range lineup. Contact our support team with your model number if you're unsure which knob set fits your range.
Key Features
- Genuine GE OEM part — factory-specified fit and finish
- Complete set of 5 stainless steel surface burner knobs for a uniform look across the range
- Resolves "cracked or peeling finish," "loose knob," and "worn markings" symptoms
- No tools required — pulls straight off the post, presses straight back on
- Compatible with the same control shaft used across a range of GE-platform ranges
- Replaces AP7187858, WB03K10305, WB03K10303, WB03K10208, WB03K10221, and WB03K10294
- Compatible with GE, Hotpoint, Haier, Monogram, and Café ranges
- Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
| Part Number |
WB03X43926 |
| Part Type |
Range Surface Burner Control Knob Set |
| Condition |
Genuine OEM |
| Brand |
GE |
| Kit Contents |
5 surface burner knobs |
| Finish |
Stainless steel |
| Weight |
Approx. 2.64 oz. (full set) |
| Mount Style |
Push-fit onto control shaft |
| Repair Difficulty |
Very Easy — no tools required |
| Quantity |
1 set (5 knobs) |
| Compatible Brands |
GE, Hotpoint, Haier, Monogram, Café |
Installation Notes
⚠️ Unplug Range Or Shut Off Breaker Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Remove each old knob by pulling it straight off its post — on most models this requires no tools, just firm, even pressure. Align each new knob from the WB03X43926 set with its corresponding control panel position and indicator arrow, then press it firmly onto the post until it seats flush. Repeat for all five burner positions. There's no need to remove the knobs for normal baking, broiling, or self-clean use once installed. Restore power and test that each knob turns smoothly through its full range, with the markings lining up correctly against the indicator arrow at each setting. Tools needed: none.
Frequently Asked Questions
My knobs' finish is bubbling after many years. Is this the right fix?
Yes, this is a common wear pattern on older knobs — one customer described replacing 14-year-old knobs whose coating had started to bubble, and found the swap simple enough to do entirely by hand with no tools. If your knobs are showing this kind of surface wear, a full set replacement gives your range a consistent, refreshed look across all burners.
Do I need to remove these knobs before running a self-clean cycle?
No — these knobs are designed to be left in place during normal oven use, including self-clean cycles. One customer specifically noted using the self-clean feature without removing the knobs and had no issues.
Can I buy just one replacement knob instead of the full set of 5?
This particular listing is sold as a complete 5-knob set rather than individually. If only one knob has failed, you may still prefer the full set for a matching, uniform appearance across the range, especially if the remaining original knobs are also showing age. Contact our support team if you're looking for a single replacement knob instead.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original stainless steel finish, shaft fit, and marking layout of the surface burner knobs originally installed on your range.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
