WE01X36920 Genuine OEM GE Dryer Cycle Selector Control Knob
The WE01X36920 is a genuine GE OEM cycle selector control knob for GE dryers. This is the knob you turn to choose a drying cycle — it engages the splined shaft behind the control console, and its position tells the dryer's control which cycle you've selected. It's a simple part mechanically, but it's also the single point of contact between you and the dryer's cycle selection, so when it fails, you lose the ability to reliably choose or confirm a cycle at all.
Made of durable plastic with a textured grip surface and accurate position indexing so the pointer lines up correctly with each cycle marking on the console. Over years of daily use, the knob's internal splines can wear down or strip, causing it to spin freely on the shaft without turning the selector, or the knob itself can crack, chip, or simply go missing. A worn or damaged knob typically shows up as difficulty turning the dial, a knob that spins without changing the cycle, or an inability to select a cycle at all. It directly replaces AP7243851.
Quick Answer
The WE01X36920 Genuine OEM GE Dryer Cycle Selector Control Knob fixes GE dryers where the cycle selector knob is cracked, missing, spins without engaging the shaft, or won't turn smoothly. Direct push-fit onto the selector shaft. Replaces AP7243851. Some models also use a separate options selector knob, WE01X36921, sold separately — check whether your dryer has one before ordering just this cycle knob.
Common Problems This Part Fixes
- Cycle selector knob spins freely without changing the selected cycle
- Knob is difficult to turn, feels loose, or grinds when rotated
- Visible cracks, chips, or breakage on the knob itself
- Knob is missing entirely, making cycle selection impossible
- Cycle indicator doesn't line up correctly with the selected setting
- Knob has fallen off the shaft and won't stay seated
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer cycle selector control knob directly replaces the following OEM and cross-reference part numbers:
WE01X36920, AP7243851, FIX17873905, AGE218040, PD00092463, PS17873905
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cycle selector knob is compatible with select GE dryers, including model numbers such as:
- GTX38GASW0WS, GTX38EASW0WS
- GTD38GASW0WS, GTD38EASW0WS
- GTD48GASW0WB, GTD48EASW0WB
- ETD48GASW0WB, ETD48EASW0WB
Note: This is the cycle selector knob specifically. Some of these same dryers also use a separate options selector knob, part number WE01X36921, for adjusting settings like heat level or dryness — that knob is sold separately and is not included with this listing. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob or knobs you need.
Key Features
- Genuine GE OEM part — factory-specified spline fit and position indexing
- Engages the console shaft splines to allow accurate cycle selection
- Resolves "knob spins without changing cycle," "difficult to turn," "cracked or broken," and "missing knob" symptoms
- Textured grip surface for comfortable, secure handling
- Durable plastic construction built for long-term daily use
- Direct push-fit installation — no tools required for most models
- Replaces AP7243851
- Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
| Part Number |
WE01X36920 |
| Part Type |
Dryer Cycle Selector Control Knob |
| Condition |
Genuine OEM |
| Brand |
GE |
| Material |
Durable plastic |
| Mount Style |
Push-fit onto splined control shaft |
| Companion Part |
WE01X36921 (options selector knob, sold separately) |
| Repair Difficulty |
Very Easy — typically no tools required |
| Quantity |
1 knob |
| Compatible Brand |
GE |
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Pull the old selector knob straight off the shaft — on most models this requires no tools, just firm, even pressure. If the knob doesn't pull free easily, check for a small retaining clip or screw at the base of the knob on some models, and remove that first rather than forcing it. Align the new WE01X36920 knob with the splined shaft, matching the flat or notched side of the shaft to the corresponding feature inside the knob, and push it firmly onto the shaft until it seats fully flush against the console. If the knob doesn't seat easily, stop and inspect the shaft splines and the knob's internal fitting for damage before forcing it further. Restore power and test that the knob turns smoothly and the cycle indicator lines up correctly with each setting. Tools needed: none for most models; small flat-blade screwdriver if your model uses a retaining clip.
Frequently Asked Questions
My knob spins freely but doesn't change the cycle. Is this the part I need?
Yes, this is the classic symptom of a worn or stripped knob. Over years of turning, the internal splines that grip the control shaft can wear down until the knob spins independently of the shaft instead of turning it. Replacing the knob restores that positive connection so the cycle selection actually changes when you turn it.
Do I need to remove the control console to replace this knob?
Not usually. On most models, the knob simply pulls straight off the shaft and the new one pushes straight on — no console removal or tools required. A small number of models secure the knob with a retaining clip or screw at its base, so check for that before pulling if the knob seems unusually secure.
My dryer has more than one knob. Which one is this?
This WE01X36920 is specifically the cycle selector knob — the one you use to choose the drying cycle itself. Some of the same dryers also have a separate options selector knob (WE01X36921) for adjusting settings like heat level, sold as a different part. If more than one knob on your dryer needs replacing, you'll need to order each part separately.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original spline fit, position indexing, and grip design of the cycle selector knob originally installed on your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
