WE03X29704 Dryer Genuine Drive Belt

Description

WE03X29704 Dryer Drive Belt — Genuine OEM GE

Product Description

The WE03X29704 is a genuine OEM drive belt for select GE-manufactured dryers. It is a poly-V ribbed belt that wraps around the outside of the dryer drum, loops under the idler pulley to maintain tension, and then wraps around the motor pulley. When the motor turns, the belt transfers that rotation to the drum — this single belt is the only mechanical link between the motor and the drum. The ribbed side of the belt grips the motor pulley and idler pulley, while the flat (smooth) side rides against the drum surface. The idler pulley is spring-loaded, pressing against the belt to keep it taut so it does not slip under the weight of a wet load.

Because the belt is the sole connection between motor and drum, a broken belt means the drum stops turning completely — even though the motor continues to run. Over time, the belt stretches, the rubber surface wears smooth, and the ribs lose their grip. A belt that is wearing out may squeal or slip before it breaks entirely, especially under heavy loads when the drum requires more torque to turn. Eventually the rubber fatigues at a stress point and the belt snaps. At that point the dryer motor will run, the blower will push air, but the drum will not rotate and clothes will not tumble or dry.

Quick Answer

Why Did the Dryer Drum Stop Turning?

If the dryer motor runs and you can hear the blower pushing air, but the drum does not turn, the most common cause is a broken drive belt. The belt wraps around the drum and connects it to the motor — when it breaks, the drum has no way to rotate. You can often confirm a broken belt without disassembly: open the dryer door, try to turn the drum by hand. If it spins freely with almost no resistance, the belt is broken (a drum with an intact belt resists hand-turning because you are also turning the motor through the belt). The WE03X29704 is the genuine OEM replacement belt for select GE dryers. Always confirm against your model's parts diagram before ordering — GE dryers use several different belts depending on the platform.

Common Symptoms

  • Dryer motor runs but the drum does not turn
  • Drum spins freely by hand with no resistance (belt is broken)
  • Squealing or squeaking noise during operation (belt is slipping)
  • Thumping or rhythmic noise as a worn belt rides unevenly on the drum
  • Clothes come out damp because the drum is not tumbling

Replaces Part Numbers

The WE03X29704 is the current GE part number for this drive belt. It replaces the following part and cross-reference numbers.

WE03X29704 replaces 308D1415P003, 4PH 2467 SH787, AGE25573, AP6980594, EAP12743316, PD00069279, PS12743316

Compatibility & Model Cross Reference

This genuine OEM drive belt fits select GE-manufactured dryers. It is designed for GE's front-load and ventless dryer platforms — not the older top-load GE dryer platform (which uses a different belt). Always confirm your model number against the manufacturer's parts diagram before ordering.

GE: GFD55ESMN0WW, GFD55GSSN0WW, GFD55ESSN0WW, GFD85ESSN0WW, GFD85GSSN0WW, GFD65ESMN1SN

GE Profile / Café: PFD87ESMV0RS, PFD95GSPW0GN, and other select models

Hotpoint: Select dryer models on the same platform

This is a small sample — not every GE-branded dryer uses this belt. GE dryers use several different drive belts depending on the platform. The WE03X29704 fits a specific set of newer front-load models (GFD, GFV, PFD series). The older top-load GE dryer platform (GTD, DBXR, DBLR series) uses a different belt (WE03X29897, which superseded WE12M29). These belts are NOT interchangeable. Your model number is on a sticker inside the door opening. Not sure which belt you need? Send us your model number and we'll confirm.

Key Features

  • Genuine OEM GE dryer drive belt
  • Poly-V ribbed design — ribbed side grips motor and idler pulleys
  • Wraps around the drum, idler pulley, and motor pulley
  • Fits select GE front-load and ventless dryer platforms (GFD, GFV, PFD series)
  • Works on both electric and gas versions of compatible models
  • Direct replacement — same belt routing as the original

Product Specifications

Part Number WE03X29704
Condition New
Brand GE
Part Type Dryer Drive Belt (Drum Belt)
Appliance Type Dryer (Electric and Gas)
Belt Style Poly-V Ribbed
Material Rubber
Country of Origin United States

Installation & Safety Notes

Safety Warning
Unplug the dryer from the electrical outlet (and shut off the gas supply valve on gas models) before beginning work. Remove the top panel and then the front panel to access the drum and belt routing area. Before removing the old belt, note how it routes around the drum, under the idler pulley, and around the motor pulley — take a photo if needed, because the new belt must follow the same path. The ribbed side of the belt faces inward toward the motor and idler pulleys. The flat side rides against the drum. After installing the new belt, turn the drum by hand to verify the belt tracks straight and the idler pulley holds proper tension before reassembling.

Frequently Asked Questions

How does the dryer drive belt system work?
The belt wraps around the full circumference of the drum, then routes down to a spring-loaded idler pulley that keeps the belt tight, and finally wraps around the small motor pulley. When the motor turns, it drives the belt, which rotates the drum. The idler pulley's spring tension keeps the belt from slipping — without it, the belt would go slack and the drum would not turn consistently. The ribbed surface of the belt grips the grooved motor pulley and idler pulley for positive traction, while the flat side of the belt presses against the smooth drum surface using friction.
How can I tell if the drive belt is broken without taking the dryer apart?
Open the dryer door and try to turn the drum by hand. If the belt is intact, the drum will resist turning because you are rotating the motor through the belt — there is noticeable drag. If the belt is broken, the drum spins freely with almost no resistance. You can also start the dryer and listen: if you hear the motor running and the blower pushing air but the drum is not moving, the belt is very likely broken. Some GE dryers also have a belt switch that prevents the dryer from starting if the belt is broken — on those models, the dryer will not start at all.
Why does a dryer belt break?
Normal wear over time is the most common cause. Every drying cycle stretches and flexes the belt thousands of times as it wraps around the drum, bends over the idler pulley, and grips the motor pulley. The rubber gradually loses elasticity, the ribs wear down, and the belt develops a weak point where it eventually snaps. Overloading the dryer accelerates this process because the motor has to work harder to turn a heavier drum, putting more stress on the belt. A seized or rough idler pulley or drum bearing can also cause premature belt failure because the belt has to overcome extra friction every revolution.
Should I replace the idler pulley at the same time as the belt?
It is not strictly required, but it is strongly recommended. The idler pulley spins on a bearing every time the dryer runs, and by the time the belt has worn through, the pulley bearing may also be worn. A rough or seized idler pulley puts uneven stress on the new belt and can cause it to wear out prematurely. Since you already have the dryer disassembled to reach the belt, inspecting the idler pulley takes only a moment — spin it by hand and listen for grinding, roughness, or wobble. If it does not spin smoothly and quietly, replace it.
Does this belt fit both gas and electric dryers?
Yes. The drive belt is a mechanical component that connects the motor to the drum — it has no electrical function. Gas and electric versions of the same GE dryer model use the same drum, the same motor, and the same belt. The difference between gas and electric is the heat source (a gas burner assembly versus an electric heating element), which is a separate system from the belt and drum.
What is the difference between this belt and the WE03X29897?
GE dryers use several different drive belts depending on the platform. The WE03X29704 fits GE's newer front-load dryer platform — primarily the GFD, GFV, and PFD series models. The WE03X29897 (which superseded the older WE12M29 and WE12M22) is an 89.5-inch, 4-rib belt that fits GE's traditional top-load dryer platform — the GTD, DBXR, DBLR, and similar series. These two belts are different lengths and profiles and are NOT interchangeable. Always look up your model number in the parts diagram to confirm which belt your dryer uses.
Genuine OEM Part Fast Shipping Easy Installation

Please verify your appliance model number before ordering.

Product form

WE03X29704 Dryer Genuine Drive Belt

Free Pickup in In Stock Parts-O-Matic - WB Store 1820 Featherstone Road Woodbridge, VA 22191 Usually ready in 1 hour
Online Shipped Price $38.00 List Price $27.90You Save: $10.10Delivered to your address
Store Walk-In
Discounted Price
$18.97Walk-In Savings: $8.93In-store purchase only — not valid for online checkout
✓ IN STOCK
Ships Today if ordered within --:--:--
Free Pickup in our Store • Usually ready in 1 hour
🔍 CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check compatibility.

View Full Compatibility List ↓
  • Shipped today? Order within: Nov 21, 2026 14:00:00 -0500

Description

WE03X29704 Dryer Drive Belt — Genuine OEM GE

Product Description

The WE03X29704 is a genuine OEM drive belt for select GE-manufactured dryers. It is a poly-V ribbed belt that wraps around the outside of the dryer drum, loops under the idler pulley to maintain tension, and then wraps around the motor pulley. When the motor turns, the belt transfers that rotation to the drum — this single belt is the only mechanical link between the motor and the drum. The ribbed side of the belt grips the motor pulley and idler pulley, while the flat (smooth) side rides against the drum surface. The idler pulley is spring-loaded, pressing against the belt to keep it taut so it does not slip under the weight of a wet load.

Because the belt is the sole connection between motor and drum, a broken belt means the drum stops turning completely — even though the motor continues to run. Over time, the belt stretches, the rubber surface wears smooth, and the ribs lose their grip. A belt that is wearing out may squeal or slip before it breaks entirely, especially under heavy loads when the drum requires more torque to turn. Eventually the rubber fatigues at a stress point and the belt snaps. At that point the dryer motor will run, the blower will push air, but the drum will not rotate and clothes will not tumble or dry.

Quick Answer

Why Did the Dryer Drum Stop Turning?

If the dryer motor runs and you can hear the blower pushing air, but the drum does not turn, the most common cause is a broken drive belt. The belt wraps around the drum and connects it to the motor — when it breaks, the drum has no way to rotate. You can often confirm a broken belt without disassembly: open the dryer door, try to turn the drum by hand. If it spins freely with almost no resistance, the belt is broken (a drum with an intact belt resists hand-turning because you are also turning the motor through the belt). The WE03X29704 is the genuine OEM replacement belt for select GE dryers. Always confirm against your model's parts diagram before ordering — GE dryers use several different belts depending on the platform.

Common Symptoms

  • Dryer motor runs but the drum does not turn
  • Drum spins freely by hand with no resistance (belt is broken)
  • Squealing or squeaking noise during operation (belt is slipping)
  • Thumping or rhythmic noise as a worn belt rides unevenly on the drum
  • Clothes come out damp because the drum is not tumbling

Replaces Part Numbers

The WE03X29704 is the current GE part number for this drive belt. It replaces the following part and cross-reference numbers.

WE03X29704 replaces 308D1415P003, 4PH 2467 SH787, AGE25573, AP6980594, EAP12743316, PD00069279, PS12743316

Compatibility & Model Cross Reference

This genuine OEM drive belt fits select GE-manufactured dryers. It is designed for GE's front-load and ventless dryer platforms — not the older top-load GE dryer platform (which uses a different belt). Always confirm your model number against the manufacturer's parts diagram before ordering.

GE: GFD55ESMN0WW, GFD55GSSN0WW, GFD55ESSN0WW, GFD85ESSN0WW, GFD85GSSN0WW, GFD65ESMN1SN

GE Profile / Café: PFD87ESMV0RS, PFD95GSPW0GN, and other select models

Hotpoint: Select dryer models on the same platform

This is a small sample — not every GE-branded dryer uses this belt. GE dryers use several different drive belts depending on the platform. The WE03X29704 fits a specific set of newer front-load models (GFD, GFV, PFD series). The older top-load GE dryer platform (GTD, DBXR, DBLR series) uses a different belt (WE03X29897, which superseded WE12M29). These belts are NOT interchangeable. Your model number is on a sticker inside the door opening. Not sure which belt you need? Send us your model number and we'll confirm.

Key Features

  • Genuine OEM GE dryer drive belt
  • Poly-V ribbed design — ribbed side grips motor and idler pulleys
  • Wraps around the drum, idler pulley, and motor pulley
  • Fits select GE front-load and ventless dryer platforms (GFD, GFV, PFD series)
  • Works on both electric and gas versions of compatible models
  • Direct replacement — same belt routing as the original

Product Specifications

Part Number WE03X29704
Condition New
Brand GE
Part Type Dryer Drive Belt (Drum Belt)
Appliance Type Dryer (Electric and Gas)
Belt Style Poly-V Ribbed
Material Rubber
Country of Origin United States

Installation & Safety Notes

Safety Warning
Unplug the dryer from the electrical outlet (and shut off the gas supply valve on gas models) before beginning work. Remove the top panel and then the front panel to access the drum and belt routing area. Before removing the old belt, note how it routes around the drum, under the idler pulley, and around the motor pulley — take a photo if needed, because the new belt must follow the same path. The ribbed side of the belt faces inward toward the motor and idler pulleys. The flat side rides against the drum. After installing the new belt, turn the drum by hand to verify the belt tracks straight and the idler pulley holds proper tension before reassembling.

Frequently Asked Questions

How does the dryer drive belt system work?
The belt wraps around the full circumference of the drum, then routes down to a spring-loaded idler pulley that keeps the belt tight, and finally wraps around the small motor pulley. When the motor turns, it drives the belt, which rotates the drum. The idler pulley's spring tension keeps the belt from slipping — without it, the belt would go slack and the drum would not turn consistently. The ribbed surface of the belt grips the grooved motor pulley and idler pulley for positive traction, while the flat side of the belt presses against the smooth drum surface using friction.
How can I tell if the drive belt is broken without taking the dryer apart?
Open the dryer door and try to turn the drum by hand. If the belt is intact, the drum will resist turning because you are rotating the motor through the belt — there is noticeable drag. If the belt is broken, the drum spins freely with almost no resistance. You can also start the dryer and listen: if you hear the motor running and the blower pushing air but the drum is not moving, the belt is very likely broken. Some GE dryers also have a belt switch that prevents the dryer from starting if the belt is broken — on those models, the dryer will not start at all.
Why does a dryer belt break?
Normal wear over time is the most common cause. Every drying cycle stretches and flexes the belt thousands of times as it wraps around the drum, bends over the idler pulley, and grips the motor pulley. The rubber gradually loses elasticity, the ribs wear down, and the belt develops a weak point where it eventually snaps. Overloading the dryer accelerates this process because the motor has to work harder to turn a heavier drum, putting more stress on the belt. A seized or rough idler pulley or drum bearing can also cause premature belt failure because the belt has to overcome extra friction every revolution.
Should I replace the idler pulley at the same time as the belt?
It is not strictly required, but it is strongly recommended. The idler pulley spins on a bearing every time the dryer runs, and by the time the belt has worn through, the pulley bearing may also be worn. A rough or seized idler pulley puts uneven stress on the new belt and can cause it to wear out prematurely. Since you already have the dryer disassembled to reach the belt, inspecting the idler pulley takes only a moment — spin it by hand and listen for grinding, roughness, or wobble. If it does not spin smoothly and quietly, replace it.
Does this belt fit both gas and electric dryers?
Yes. The drive belt is a mechanical component that connects the motor to the drum — it has no electrical function. Gas and electric versions of the same GE dryer model use the same drum, the same motor, and the same belt. The difference between gas and electric is the heat source (a gas burner assembly versus an electric heating element), which is a separate system from the belt and drum.
What is the difference between this belt and the WE03X29897?
GE dryers use several different drive belts depending on the platform. The WE03X29704 fits GE's newer front-load dryer platform — primarily the GFD, GFV, and PFD series models. The WE03X29897 (which superseded the older WE12M29 and WE12M22) is an 89.5-inch, 4-rib belt that fits GE's traditional top-load dryer platform — the GTD, DBXR, DBLR, and similar series. These two belts are different lengths and profiles and are NOT interchangeable. Always look up your model number in the parts diagram to confirm which belt your dryer uses.
Genuine OEM Part Fast Shipping Easy Installation

Please verify your appliance model number before ordering.

WE03X29704, 308D1415P003, 4PH 2467 SH787, AGE25573, AP6980594EAP12743316, PD00069279, PS12743316

Model Compatibility

Search your appliance model number below. Supports partial or full model search.

🔍 CHECK YOUR MODEL COMPATIBILITY

Type your full or partial model number above to instantly check if this part fits your appliance.

✓ Guaranteed Fit — exact model match found.
No matching model found. Please verify your full model number or contact support.
Loading compatible models...
Model Number Manufacturer Appliance Type

⚠️ Note: This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.

Recently viewed products

© 2026 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Need Help? Call Us Now +1 (855) 200-8978 CONTACT US
    WE03X29704 Dryer Genuine Drive Belt
    WE03X29704 Dryer Genuine Drive Belt
    $38.00 $27.90