WE03X37320 Dryer Genuine OEM Drum Bearing Slide

Description

WE03X37320 Dryer Drum Bearing Slide (2-Pack) — Genuine OEM

The WE03X37320 is a genuine OEM 2-pack of front drum bearing slides from GE. These slides are the low-friction pads that sit inside the front bearing assembly and provide the surface the drum rides on as it rotates. The front of the dryer drum rests on a felt-lined bearing ring mounted to the front bulkhead, and the bearing slides fit into slots on that ring. As the drum turns, its front lip glides over these slides instead of grinding directly against the metal bearing bracket. Without them, the drum makes metal-to-metal contact with the support, which creates the squealing or scraping noise that signals worn slides.

Each slide is a molded plastic pad approximately 3 inches long with a snap-fit tab that locks it into the bearing assembly. The two slides in this pack mount in specific positions on the bearing — typically the upper slots that carry the most drum weight. Over time the slide surface wears thin from constant friction with the rotating drum, eventually exposing the metal beneath it. That is the point where the dryer starts making noise. Because both slides wear at similar rates, GE packages them as a 2-pack so you replace the pair together.

QUICK ANSWER
Will This Fix Your Dryer?

If your GE or Hotpoint dryer is squealing, squeaking, or making a scraping noise during tumbling — especially a sound that gets louder over time — the front drum bearing slides are the most common cause. The WE03X37320 is a genuine OEM 2-pack that replaces the worn slides in the front bearing assembly. Sold as a pair, easy to moderate install, approximately 30 minutes to 1 hour.

Common Symptoms
  • Squealing or squeaking noise during the tumble cycle
  • Scraping or grinding sound coming from the front of the dryer
  • Dark marks or streaks appearing on clothes
  • Drum does not rotate smoothly — hesitates or catches
  • Visible wear-through on existing slides when inspected
Cross Reference Information

The WE03X37320 is GE's current part number for this dryer drum bearing slide 2-pack. It supersedes the earlier numbers WE03X34318 and WE3M52 and cross-references to the following distributor catalog numbers.

WE03X37320 replaces WE03X34318, WE3M52, WE03X37320-25PK, AGE25726, AP7217726, EAP17626249, FIX17626249, PD00086243, PS17626249

COMPATIBILITY

This genuine OEM bearing slide 2-pack fits select GE, Hotpoint, and Kenmore dryers and washer/dryer combos. These slides mount in the front bearing assembly. Confirm your model number before ordering — GE uses several different slide profiles for different bearing positions.

Sample compatible models: NTX62E8ST1WW, GTX22EASK1WW, PTD90EBPT2RS, PTD70EBST0WS, XTD72E8ST0WS, XTD72G8ST0WS, HTX26GASW0WW, GUD27ESSJ1WW, HTX24EASK0WS, GFDL110EH2WW

Key Features
  • Genuine OEM GE dryer drum bearing slide — not an aftermarket equivalent
  • Sold as a 2-pack — replace both slides at the same time
  • Green molded plastic with snap-fit tab for secure positioning in the bearing assembly
  • Approximately 3 inches long — provides a smooth, low-friction drum glide surface
  • Reduces noise by preventing metal-to-metal contact between drum and bearing bracket
  • Easy to moderate installation — approximately 30 minutes to 1 hour
Specifications
Part Number WE03X37320
OEM Part Number WE03X37320
Condition New
Brand GE
Part Type Dryer Drum Bearing Slide
Appliance Type Dryer / Washer Dryer Combo
Color Green
Quantity 2-Pack
Compatible Brands GE, Hotpoint, Kenmore
Supersedes WE03X34318, WE3M52
Safety Warning
Disconnect the dryer from its power source before opening the cabinet. For gas dryers, also shut off the gas supply valve behind the unit. The front panel must be removed to access the bearing assembly, which requires disconnecting the door switch wiring harness — note the wire positions before disconnecting. When lifting the drum, support it evenly to avoid bending the drum rim. Snap the new slides into the correct bearing slots and confirm they are fully seated before reassembling. Running the dryer with improperly seated slides can cause the drum to shift and damage the felt seal.
Frequently Asked Questions
What do the bearing slides actually do inside my dryer?
The bearing slides are low-friction pads that sit in the front bearing assembly — the ring mounted to the front bulkhead that supports the front edge of the drum. As the drum rotates, its front lip rides over these slides. They prevent the metal drum from grinding against the metal bearing bracket, which would create noise and accelerate wear on both surfaces. Think of them as the dryer's equivalent of a bushing — a sacrificial wear surface that is designed to be replaced when it wears through.
Why does GE sell them as a 2-pack?
The front bearing assembly has multiple slide positions, and the two slides in this pack mount in the upper positions that carry the most drum weight. Because they bear the same load and rotate against the same drum surface, they wear at nearly identical rates. Replacing only one would leave a worn slide next to a new one, creating uneven drum support and causing the new slide to wear faster. GE packages the pair together so both are replaced at the same time.
How can I tell if the noise is from the bearing slides or from the drum belt?
Bearing slide noise is typically a high-pitched squeal or scrape that is loudest at the front of the dryer and is constant as long as the drum is turning. Belt noise is usually a rhythmic squeal or chirp that changes pitch with drum speed and may come and go. The quickest way to isolate the source: open the door and spin the drum by hand. If you hear a dry scraping sound with the motor off, the slides are worn. If the drum spins quietly by hand but squeals when the motor runs it, the belt or idler pulley is more likely.
Should I replace the felt seal and other slides at the same time?
It depends on their condition. While you have the front panel off, inspect the felt drum seal that wraps around the front bearing ring. If the felt is matted, torn, or has bare spots, replace it — a damaged felt seal lets hot air leak past the drum edge and can cause the new slides to wear faster. Also check the other bearing slides in the lower positions. If they show visible wear-through or grooves, replace them as well. GE sells different slide part numbers for different positions on the same bearing, so match each slide to its correct slot.
Are the WE03X37320 slides the same as WE3M52 or WE03X34318?
Yes. WE3M52 and WE03X34318 are earlier GE part numbers that have been superseded by WE03X37320. The slides may look slightly different from the older versions because GE updates the mold and material over time, but they fit the same bearing slots and serve the same function. If your parts diagram or old slide shows either of those numbers, the WE03X37320 is the current replacement.
Genuine OEM Part Fast Shipping In Stock 30–60 Minute Install
Product form

WE03X37320 Dryer Genuine OEM Drum Bearing Slide

Free Pickup in In Stock Parts-O-Matic - WB Store 1820 Featherstone Road Woodbridge, VA 22191 Usually ready in 1 hour
Online Shipped Price $24.19 List Price $22.97You Save: $1.22Delivered to your address
Store Walk-In
Discounted Price
$17.13Walk-In Savings: $5.84In-store purchase only — not valid for online checkout
✓ IN STOCK
Ships Today if ordered within --:--:--
Free Pickup in our Store • Usually ready in 1 hour
  • Shipped today? Order within: Nov 21, 2026 14:00:00 -0500

Description

WE03X37320 Dryer Drum Bearing Slide (2-Pack) — Genuine OEM

The WE03X37320 is a genuine OEM 2-pack of front drum bearing slides from GE. These slides are the low-friction pads that sit inside the front bearing assembly and provide the surface the drum rides on as it rotates. The front of the dryer drum rests on a felt-lined bearing ring mounted to the front bulkhead, and the bearing slides fit into slots on that ring. As the drum turns, its front lip glides over these slides instead of grinding directly against the metal bearing bracket. Without them, the drum makes metal-to-metal contact with the support, which creates the squealing or scraping noise that signals worn slides.

Each slide is a molded plastic pad approximately 3 inches long with a snap-fit tab that locks it into the bearing assembly. The two slides in this pack mount in specific positions on the bearing — typically the upper slots that carry the most drum weight. Over time the slide surface wears thin from constant friction with the rotating drum, eventually exposing the metal beneath it. That is the point where the dryer starts making noise. Because both slides wear at similar rates, GE packages them as a 2-pack so you replace the pair together.

QUICK ANSWER
Will This Fix Your Dryer?

If your GE or Hotpoint dryer is squealing, squeaking, or making a scraping noise during tumbling — especially a sound that gets louder over time — the front drum bearing slides are the most common cause. The WE03X37320 is a genuine OEM 2-pack that replaces the worn slides in the front bearing assembly. Sold as a pair, easy to moderate install, approximately 30 minutes to 1 hour.

Common Symptoms
  • Squealing or squeaking noise during the tumble cycle
  • Scraping or grinding sound coming from the front of the dryer
  • Dark marks or streaks appearing on clothes
  • Drum does not rotate smoothly — hesitates or catches
  • Visible wear-through on existing slides when inspected
Cross Reference Information

The WE03X37320 is GE's current part number for this dryer drum bearing slide 2-pack. It supersedes the earlier numbers WE03X34318 and WE3M52 and cross-references to the following distributor catalog numbers.

WE03X37320 replaces WE03X34318, WE3M52, WE03X37320-25PK, AGE25726, AP7217726, EAP17626249, FIX17626249, PD00086243, PS17626249

COMPATIBILITY

This genuine OEM bearing slide 2-pack fits select GE, Hotpoint, and Kenmore dryers and washer/dryer combos. These slides mount in the front bearing assembly. Confirm your model number before ordering — GE uses several different slide profiles for different bearing positions.

Sample compatible models: NTX62E8ST1WW, GTX22EASK1WW, PTD90EBPT2RS, PTD70EBST0WS, XTD72E8ST0WS, XTD72G8ST0WS, HTX26GASW0WW, GUD27ESSJ1WW, HTX24EASK0WS, GFDL110EH2WW

Key Features
  • Genuine OEM GE dryer drum bearing slide — not an aftermarket equivalent
  • Sold as a 2-pack — replace both slides at the same time
  • Green molded plastic with snap-fit tab for secure positioning in the bearing assembly
  • Approximately 3 inches long — provides a smooth, low-friction drum glide surface
  • Reduces noise by preventing metal-to-metal contact between drum and bearing bracket
  • Easy to moderate installation — approximately 30 minutes to 1 hour
Specifications
Part Number WE03X37320
OEM Part Number WE03X37320
Condition New
Brand GE
Part Type Dryer Drum Bearing Slide
Appliance Type Dryer / Washer Dryer Combo
Color Green
Quantity 2-Pack
Compatible Brands GE, Hotpoint, Kenmore
Supersedes WE03X34318, WE3M52
Safety Warning
Disconnect the dryer from its power source before opening the cabinet. For gas dryers, also shut off the gas supply valve behind the unit. The front panel must be removed to access the bearing assembly, which requires disconnecting the door switch wiring harness — note the wire positions before disconnecting. When lifting the drum, support it evenly to avoid bending the drum rim. Snap the new slides into the correct bearing slots and confirm they are fully seated before reassembling. Running the dryer with improperly seated slides can cause the drum to shift and damage the felt seal.
Frequently Asked Questions
What do the bearing slides actually do inside my dryer?
The bearing slides are low-friction pads that sit in the front bearing assembly — the ring mounted to the front bulkhead that supports the front edge of the drum. As the drum rotates, its front lip rides over these slides. They prevent the metal drum from grinding against the metal bearing bracket, which would create noise and accelerate wear on both surfaces. Think of them as the dryer's equivalent of a bushing — a sacrificial wear surface that is designed to be replaced when it wears through.
Why does GE sell them as a 2-pack?
The front bearing assembly has multiple slide positions, and the two slides in this pack mount in the upper positions that carry the most drum weight. Because they bear the same load and rotate against the same drum surface, they wear at nearly identical rates. Replacing only one would leave a worn slide next to a new one, creating uneven drum support and causing the new slide to wear faster. GE packages the pair together so both are replaced at the same time.
How can I tell if the noise is from the bearing slides or from the drum belt?
Bearing slide noise is typically a high-pitched squeal or scrape that is loudest at the front of the dryer and is constant as long as the drum is turning. Belt noise is usually a rhythmic squeal or chirp that changes pitch with drum speed and may come and go. The quickest way to isolate the source: open the door and spin the drum by hand. If you hear a dry scraping sound with the motor off, the slides are worn. If the drum spins quietly by hand but squeals when the motor runs it, the belt or idler pulley is more likely.
Should I replace the felt seal and other slides at the same time?
It depends on their condition. While you have the front panel off, inspect the felt drum seal that wraps around the front bearing ring. If the felt is matted, torn, or has bare spots, replace it — a damaged felt seal lets hot air leak past the drum edge and can cause the new slides to wear faster. Also check the other bearing slides in the lower positions. If they show visible wear-through or grooves, replace them as well. GE sells different slide part numbers for different positions on the same bearing, so match each slide to its correct slot.
Are the WE03X37320 slides the same as WE3M52 or WE03X34318?
Yes. WE3M52 and WE03X34318 are earlier GE part numbers that have been superseded by WE03X37320. The slides may look slightly different from the older versions because GE updates the mold and material over time, but they fit the same bearing slots and serve the same function. If your parts diagram or old slide shows either of those numbers, the WE03X37320 is the current replacement.
Genuine OEM Part Fast Shipping In Stock 30–60 Minute Install
WE03X37320, WE03X34318, WE3M52, WE03X37320-25PK, AGE25726, AP7217726, EAP17626249, FIX17626249, PD00086243, PS17626249

Recently viewed products

© 2026 Parts-O-Matic,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Need Help? Call Us Now +1 (855) 200-8978 CONTACT US
    WE03X37320 Dryer Genuine OEM Drum Bearing Slide
    WE03X37320 Dryer Genuine OEM Drum Bearing Slide
    $24.19 $22.97