WE12X10014 Dryer Genuine OEM Drum Belt
Description
Genuine GE OEM Dryer Part
GE WE12X10014 Dryer Genuine OEM Drum Belt
87-inch, 4-rib drum drive belt for select GE, Hotpoint, RCA and Kenmore dryers.
Product Overview
The GE WE12X10014 Dryer Genuine OEM Drum Belt connects the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This genuine GE replacement belt is designed for compatible GE, Hotpoint, RCA, and select Kenmore dryers that use the common 87-inch, 4-rib drive belt.
Quick Answer
WE12X10014 is an approximately 87 inch long × 1/4 inch wide dryer belt with 4 ribs/ridges . It replaces several earlier GE belt numbers including WE12X42 and WE12X82.
Common Problems This Part May Fix
Dryer drum does not turn
Motor runs but drum stays still
Belt is broken, stretched, glazed, or frayed
Squealing or slapping noise from a damaged belt
Dryer will not tumble properly
Replaces and Cross-References
WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
Cross-reference numbers are provided for identification. This listing is for Genuine GE OEM part WE12X10014.
Compatibility
Fits select GE, Hotpoint, RCA and Kenmore dryers. Compatible model examples include:
DCLR333ET0WW
DBLR333ET0WW
DBLR333GT0WW
NVLR333ET0WB
NVLR333GT0WB
DVLR223ET0WW
DDE7200SBLWW
DDE7500GAL
DLB3400SBLWH
DWLR473ET0WW
NLLR113ET1WO
DDG7688MCL
Important: This is only a partial compatibility list. Verify the complete dryer model number and original belt part number before ordering.
Key Features
Genuine GE OEM replacement part
Approx. 87 inches long
Approx. 1/4 inch wide
4-rib / 4-ridge drive surface
Transfers motor power to dryer drum
Fits many GE-built dryer platforms
Product Specifications
Manufacturer Part Number
WE12X10014
Brand
GE Genuine OEM
Part Type
Dryer Drum Drive Belt
Length
Approx. 87 in.
Width
Approx. 1/4 in.
Ribs / Ridges
4
Condition
New
Part Quality
Genuine OEM
Package Quantity
1 Belt
Installation Notes
Unplug the dryer before service.
Access the drum and release belt tension from the idler pulley.
Remove the old belt and inspect the idler pulley and motor pulley for wear or debris.
Install the new belt with the ribbed side against the drum where specified by the dryer design.
Route the belt around the motor pulley and idler exactly as shown in the appliance service diagram.
Rotate the drum by hand to confirm smooth tracking before reassembly.
Diagnostic tip: A broken belt can result from a seized idler pulley, worn drum bearing/glides, or an obstructed drum. Inspect related components before installing the new belt.
Frequently Asked Questions
How long is WE12X10014?
It is approximately 87 inches long and 1/4 inch wide.
How many ribs does this belt have?
It has 4 ribs/ridges on the drive surface.
Does it replace WE12X42 and WE12X82?
Yes. WE12X10014 is commonly listed as the replacement for those earlier belt numbers.
Is this a Genuine GE OEM belt?
Yes. This listing is for Genuine GE OEM part WE12X10014.
Shop With Confidence
Verify the complete dryer model number before ordering. Our compatibility team can help confirm whether Genuine GE OEM WE12X10014 is correct for your dryer.
Genuine GE OEM 87 Inch Belt 4-Rib Design Compatibility Support
Product form
WE12X10014 Dryer Genuine OEM Drum Belt
our Store
Parts-O-Matic - WB Store
1820 Featherstone Road
Woodbridge, VA 22191
Usually ready in 1 hour
our Store
Parts-O-Matic - WB Store
1820 Featherstone Road
Woodbridge, VA 22191
Usually ready in 1 hour
Online Shipped Price
$36.90
List Price
$22.50 You Save: $14.40 Delivered to your address
Store Walk-In
$18.63 Walk-In Savings: $3.87 In-store purchase only — not valid for online checkout
✓
IN STOCK
✓
Ships Today
if ordered within
--:--:--
Free Pickup in our Store
•
Usually ready in 1 hour
Shipped today? Order within:
Oct 11, 2026 14:00:00 -0400
Description
Genuine GE OEM Dryer Part
GE WE12X10014 Dryer Genuine OEM Drum Belt
87-inch, 4-rib drum drive belt for select GE, Hotpoint, RCA and Kenmore dryers.
Product Overview
The GE WE12X10014 Dryer Genuine OEM Drum Belt connects the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This genuine GE replacement belt is designed for compatible GE, Hotpoint, RCA, and select Kenmore dryers that use the common 87-inch, 4-rib drive belt.
Quick Answer
WE12X10014 is an approximately 87 inch long × 1/4 inch wide dryer belt with 4 ribs/ridges . It replaces several earlier GE belt numbers including WE12X42 and WE12X82.
Common Problems This Part May Fix
Dryer drum does not turn
Motor runs but drum stays still
Belt is broken, stretched, glazed, or frayed
Squealing or slapping noise from a damaged belt
Dryer will not tumble properly
Replaces and Cross-References
WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
Cross-reference numbers are provided for identification. This listing is for Genuine GE OEM part WE12X10014.
Compatibility
Fits select GE, Hotpoint, RCA and Kenmore dryers. Compatible model examples include:
DCLR333ET0WW
DBLR333ET0WW
DBLR333GT0WW
NVLR333ET0WB
NVLR333GT0WB
DVLR223ET0WW
DDE7200SBLWW
DDE7500GAL
DLB3400SBLWH
DWLR473ET0WW
NLLR113ET1WO
DDG7688MCL
Important: This is only a partial compatibility list. Verify the complete dryer model number and original belt part number before ordering.
Key Features
Genuine GE OEM replacement part
Approx. 87 inches long
Approx. 1/4 inch wide
4-rib / 4-ridge drive surface
Transfers motor power to dryer drum
Fits many GE-built dryer platforms
Product Specifications
Manufacturer Part Number
WE12X10014
Brand
GE Genuine OEM
Part Type
Dryer Drum Drive Belt
Length
Approx. 87 in.
Width
Approx. 1/4 in.
Ribs / Ridges
4
Condition
New
Part Quality
Genuine OEM
Package Quantity
1 Belt
Installation Notes
Unplug the dryer before service.
Access the drum and release belt tension from the idler pulley.
Remove the old belt and inspect the idler pulley and motor pulley for wear or debris.
Install the new belt with the ribbed side against the drum where specified by the dryer design.
Route the belt around the motor pulley and idler exactly as shown in the appliance service diagram.
Rotate the drum by hand to confirm smooth tracking before reassembly.
Diagnostic tip: A broken belt can result from a seized idler pulley, worn drum bearing/glides, or an obstructed drum. Inspect related components before installing the new belt.
Frequently Asked Questions
How long is WE12X10014?
It is approximately 87 inches long and 1/4 inch wide.
How many ribs does this belt have?
It has 4 ribs/ridges on the drive surface.
Does it replace WE12X42 and WE12X82?
Yes. WE12X10014 is commonly listed as the replacement for those earlier belt numbers.
Is this a Genuine GE OEM belt?
Yes. This listing is for Genuine GE OEM part WE12X10014.
Shop With Confidence
Verify the complete dryer model number before ordering. Our compatibility team can help confirm whether Genuine GE OEM WE12X10014 is correct for your dryer.
Genuine GE OEM 87 Inch Belt 4-Rib Design Compatibility Support
WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
