Genuine OEM WH01X10088 Washer Start/Stop Switch Button
When a GE washer ignores the Start button, the cause is often the button itself. The WH01X10088 is a genuine OEM start/stop switch button from GE — the push button on the control panel that starts or stops a wash cycle. Behind the panel it makes direct contact with the start/stop switch on the control board, so a cracked, worn, or stuck button means presses stop registering.
This is an original GE part, not an aftermarket equivalent, with the factory size and fit. It is the button only, sold individually, and does not include the switch or the control board. Plan on an easy repair of about 15–30 minutes with pliers and a small screwdriver.
Quick Answer
The Genuine OEM WH01X10088 Start/Stop Switch Button is the replacement for a GE washer button that is cracked, worn, stuck, or no longer starts the cycle. Genuine OEM GE part, sold individually. Classic symptom: pressing Start does nothing, or the button requires far more force than before.
Common Problems This Part Fixes
- Washer won't start when the Start/Stop button is pressed
- Button feels mushy, soft, or has to be pushed harder than usual
- Button is cracked, torn, or missing
- Button stays pressed in or doesn't spring back
- Touchpad or start button does not respond
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This start/stop switch button replaces the following part numbers:
WH01X10088 replaces WH01X10306, 877584, WH01X10032, WH12X10140, WH1X10032, WH1X10088, AGE25947, AH268476, AP3661155, EA268476, EAP268476, OEM10983474, PD00026056, PS268476.
These are GE's current and earlier numbers for this button, plus common cross-references. If your old button or parts diagram shows any of them, this is the matching replacement.
Compatibility
Fits over 260 GE, Hotpoint, RCA, and Kenmore top-load washer models, plus select GE DPSE810 and PTDS650 series dryers. Common models include GTWN4250D1WS, GTWN4950D1WS, GCWN4950D0WS, GHWN4250D0WW, WCSE6270B2WW, WWSE5200B1WW, WJRE5550K2WW, EWA3000B2WW, WBB4500G1WW, and many more in the GE top-load lineup.
Note: Always verify your model number before ordering. This is the button cap only — it does not include the switch or control board. Contact our support team if you need compatibility confirmed.
Key Features
- Genuine OEM GE start/stop switch button — not an aftermarket equivalent
- Restores a responsive Start/Stop press on the control panel
- Direct replacement for WH01X10032, WH01X10306, WH12X10140, WH1X10032, and WH1X10088
- Fits over 260 GE, Hotpoint, RCA, and Kenmore top-load washer and dryer models
- Sold individually
- Package dimensions: 5.39 x 3.82 x 0.87 in
- Typical installation 15–30 minutes with pliers and a small screwdriver
Product Specifications
| Part Number |
WH01X10088 |
| OEM Part Number |
WH01X10088 |
| Part Type |
Start/Stop Switch Button |
| Condition |
Genuine OEM — New |
| Brand |
GE (General Electric) |
| Compatible Brands |
GE, Hotpoint, RCA, Kenmore |
| Appliance Type |
Top-Load Washer, Dryer |
| Quantity |
1 button |
| Package Dimensions |
5.39 x 3.82 x 0.87 in |
Installation Notes
⚠️ Unplug Power Before Starting Unplug the washer before beginning any repair. The control board sits directly behind this button — ground yourself before working near the electronics and avoid touching the board. Open the control panel per your model's service guide (some models require removing the back panel and backsplash screws or nuts). Pull the old button straight out using pliers if needed. Press the new button firmly into the same hole until it seats flush — do not force it deeper than the original. Reassemble the panel, restore power, and press Start to confirm the cycle launches. Common tools: nutdriver, screwdrivers, pliers. Estimated time: 15–30 minutes. Difficulty: Easy.
Frequently Asked Questions
My washer won't start when I press the button. Is this the part I need?
Possibly. If the button is cracked, soft, or no longer makes solid contact with the switch behind it, replacing it will fix the problem. If the button looks intact, check the lid switch first — it's the most common cause of a GE washer that won't start. On some models a small plastic lid switch probe sits under the lid; if it's been knocked out, the washer won't start regardless of the button condition.
Does this include the start/stop switch?
No. This is the button cap only. The switch it presses is a separate component located behind the control panel. If replacing the button doesn't resolve the issue, the switch itself or the control board may need to be inspected.
My old button is marked WH01X10032, WH01X10306, or WH12X10140. Will this work?
Yes. Those are earlier GE part numbers that have been superseded by WH01X10088. This is the current replacement.
How difficult is it to replace?
Rated easy. Most repairs take 15–30 minutes. Use pliers to pull out the old button and a small screwdriver to seat the new one. Take care not to push too deep — the control board and switch sit directly behind the button opening.
Is this a genuine OEM part?
Yes. WH01X10088 is a genuine OEM GE part, not an aftermarket equivalent, ensuring factory fit and specification.
Does this fit dryers as well as washers?
Yes. This button is also listed for select GE DPSE810 series electric and gas dryers, as well as PTDS650 series dryers. Confirm your dryer model number before ordering.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts across all major brands, with fast shipping from our Virginia warehouse. Reach out and our team will help confirm compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
