WH11X34740 Washer Genuine OEM Drain Pump Assembly

Description

WH11X34740 Washer Genuine OEM Drain Pump Assembly – Compatible with GE & Hotpoint Washers


Product Description

Restore proper draining and reliable washer operation with the WH11X34740 Washer Drain Pump Assembly. This Genuine OEM replacement pump is responsible for removing water from the washer during drain and spin cycles. A failing drain pump can cause standing water, slow draining, loud grinding noises, or error codes. Replacing it with this Genuine OEM assembly helps ensure efficient water removal and dependable washing performance.



Replaces Part Numbers

WH23X25518, WH23X10038, WH23X25461, PD00079543, EAP16743374, AP7195487, PS16743374.


Compatibility

This Genuine OEM replacement washer drain pump assembly fits select GE and Hotpoint washers.

Example compatible models include (but are not limited to):

  • GE GTW465ASNWW, GTW335ASNWW

  • Hotpoint HTW240ASKWS

Always verify your washer’s model number before ordering.
Contact our support team if you’re unsure.


✅ Key Features

  • 🔄 Genuine OEM – Genuine OEM part

  • 💧 Efficient Water Removal – Restores proper draining during cycles

  • 🔇 Quiet Operation – Helps eliminate grinding or buzzing noises

  • 💪 Durable Motor Construction – Designed for long service life


📐 Product Specification

  • Part Number: WH11X34740

  • Component Type: Washer Drain Pump Assembly

  • Voltage: 120V AC

  • Mounting: Direct-fit, bolt-on installation

  • Application: Washer drain and spin system

  • Quality Level: Genuine OEM


🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver, pliers

⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.

Basic Steps:

  1. Disconnect washer power and water supply.

  2. Access the drain pump from the bottom or rear of the washer.

  3. Remove hoses and electrical connectors.

  4. Remove mounting screws and take out the old pump.

  5. Install the new WH11X34740 drain pump assembly.

  6. Reconnect hoses and wiring, reassemble panels, and restore power.

  7. Run a test cycle to confirm proper draining.

⏱️ Time Required: 25–35 minutes


📦 Shop With Confidence

  • 🚚 Free Shipping on All Orders

  • ⚙️ Trusted Aftermarket Appliance Parts

  • 🔄 30-Day Return Policy

Restore proper washer draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!

Product form

WH11X34740 Washer Genuine OEM Drain Pump Assembly

Free Pickup in In Stock Parts-O-Matic - WB Store 1820 Featherstone Road Woodbridge, VA 22191 Usually ready in 1 hour

$120.80 List Price $86.90 You Save: $33.90

IN STOCK
Ships Today if ordered within --:--:--
Free Pickup in our Store Usually ready in 1 hour

    Description

    WH11X34740 Washer Genuine OEM Drain Pump Assembly – Compatible with GE & Hotpoint Washers


    Product Description

    Restore proper draining and reliable washer operation with the WH11X34740 Washer Drain Pump Assembly. This Genuine OEM replacement pump is responsible for removing water from the washer during drain and spin cycles. A failing drain pump can cause standing water, slow draining, loud grinding noises, or error codes. Replacing it with this Genuine OEM assembly helps ensure efficient water removal and dependable washing performance.



    Replaces Part Numbers

    WH23X25518, WH23X10038, WH23X25461, PD00079543, EAP16743374, AP7195487, PS16743374.


    Compatibility

    This Genuine OEM replacement washer drain pump assembly fits select GE and Hotpoint washers.

    Example compatible models include (but are not limited to):

    • GE GTW465ASNWW, GTW335ASNWW

    • Hotpoint HTW240ASKWS

    Always verify your washer’s model number before ordering.
    Contact our support team if you’re unsure.


    ✅ Key Features

    • 🔄 Genuine OEM – Genuine OEM part

    • 💧 Efficient Water Removal – Restores proper draining during cycles

    • 🔇 Quiet Operation – Helps eliminate grinding or buzzing noises

    • 💪 Durable Motor Construction – Designed for long service life


    📐 Product Specification

    • Part Number: WH11X34740

    • Component Type: Washer Drain Pump Assembly

    • Voltage: 120V AC

    • Mounting: Direct-fit, bolt-on installation

    • Application: Washer drain and spin system

    • Quality Level: Genuine OEM


    🛠️ Installation Notes

    Tools Needed: Phillips screwdriver, nut driver, pliers

    ⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.

    Basic Steps:

    1. Disconnect washer power and water supply.

    2. Access the drain pump from the bottom or rear of the washer.

    3. Remove hoses and electrical connectors.

    4. Remove mounting screws and take out the old pump.

    5. Install the new WH11X34740 drain pump assembly.

    6. Reconnect hoses and wiring, reassemble panels, and restore power.

    7. Run a test cycle to confirm proper draining.

    ⏱️ Time Required: 25–35 minutes


    📦 Shop With Confidence

    • 🚚 Free Shipping on All Orders

    • ⚙️ Trusted Aftermarket Appliance Parts

    • 🔄 30-Day Return Policy

    Restore proper washer draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!

    Recently viewed products

    © 2026 Parts-O-Matic,

      • Amazon
      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • USDC
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      Need Help? Call Us Now +1 (703) 496-3838
      WH11X34740 Washer Genuine OEM Drain Pump Assembly
      WH11X34740 Washer Genuine OEM Drain Pump Assembly
      $120.80 $86.90