Genuine OEM WP697772 Dryer Blower Wheel
The WP697772 is a genuine OEM blower wheel from Whirlpool for Whirlpool-built dryers and washer-dryer combos sold under the Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral names. The blower wheel attaches to the drive motor shaft and moves air over the heat source, through the drum, and out the exhaust vent. When the wheel wears, cracks, loses a fin, or comes loose on the shaft, the dryer gets noisy and airflow drops, so clothes take longer to dry.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and balance match the original. If your dryer is only noisy, check the blower for lint buildup first, since a clogged wheel can sound like a failing one.
Quick Answer
The Genuine OEM WP697772 Blower Wheel fixes a Whirlpool-built dryer that is noisy, has weak airflow, or takes too long to dry because the blower wheel is worn, cracked, or damaged. Genuine OEM from Whirlpool. Classic symptom: a rattling, thumping, or squealing noise from the back of the dryer, with damp clothes at the end of a normal cycle.
Common Problems This Part Fixes
- Dryer noisy, with rattling or thumping from the blower area
- Weak airflow, or clothes taking too long to dry
- Visibly cracked, chipped, or broken blower fins
- Blower wheel loose or slipping on the motor shaft
- Wheel worn out over time
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This blower wheel replaces the following part numbers:
WP697772, WPW10211915, 697772, W10211915, 687613, AP6010627, AWP48289,EAP11743811, FIX11743811, OEM18031890, PD00003053, PS11743811
These are Whirlpool's un-prefixed and earlier numbers for this blower wheel. If your old wheel or parts diagram shows any of them, match against this list.
Compatibility
This blower wheel is listed for dryers and washer-dryer combos from:
- Whirlpool, including CEE2760KQ0, WED9470WW1, and WED9400ST1
- Kenmore, including 11060052990, 11060056990, and 10687884100
- Maytag, including YMEDX700XL0 and MGDX700AG0
- KitchenAid, Amana, Crosley, Inglis, and Admiral
Note: The model list above is only a sample, since this wheel fits many more models. Confirm fit by matching the number on your old wheel or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
- Genuine OEM Whirlpool blower wheel, not an aftermarket equivalent
- Restores quiet, full airflow through the drum and exhaust
- Fits select Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Crosley, Inglis, and Admiral dryers and combos
- Straightforward replacement, typically 15–60 minutes with hand tools
Product Specifications
| Part Number |
WP697772 |
| OEM Part Number |
WP697772 |
| Part Type |
Dryer Blower Wheel |
| Condition |
Genuine OEM |
| Manufacturer |
Whirlpool |
| Application |
Select Whirlpool-Family Dryers & Washer-Dryer Combos |
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Wear work gloves. Following your model's service guide, remove the front cover to reach the blower housing, then the back cover to access the motor shaft. Hold the motor shaft steady while you unscrew the retaining nut and pull off the old wheel. Reviewers report that the nut is left-hand threaded on these dryers, so check the thread direction before forcing it. Thread the new wheel on while holding the shaft, tighten it, and replace the covers. Clean the blower housing and exhaust duct of lint while you have the dryer open, and inspect the new wheel on arrival for damage.
Frequently Asked Questions
My dryer is noisy. Is this the part I need?
Possibly. Before replacing the wheel, check whether it is clogged with lint, which can cause noise and imbalance. If the wheel is clean but cracked, chipped, or loose on the shaft, replace it. Also check the drum rollers and idler pulley, which can make similar sounds.
Is the nut on the shaft left-hand threaded?
Reviewers report that it is on these dryers, so turn it the opposite way to a normal nut when removing the old wheel. Check on your dryer before applying force.
My old wheel is marked 697772 or W10211915. Will this work?
Yes. Both numbers are on the Replaces list. If you're unsure, contact our support team with your model number and we'll confirm.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
