WP8573069 Dryer Genuine OEM Heating Element
Description
WP8573069 Dryer Genuine OEM Heating Element
The WP8573069 is a genuine OEM dual-coil heating element manufactured by Whirlpool for select Whirlpool and Maytag electric dryers. Unlike single-coil elements that run at one fixed wattage, this element uses two separate nickel-chrome alloy coils wound on the same frame. One coil handles the lower heat settings while both coils fire together for high heat, giving the dryer true variable temperature control instead of cycling a single coil on and off.
This dual-coil design is specific to certain Cabrio-platform dryers and is not interchangeable with other common Whirlpool heating elements such as 279838 or 8544771. When either coil fails, the dryer may lose heat entirely or heat only on certain settings. The WP8573069 is the complete element assembly — coils, frame, and insulators — ready to install in about 30 to 60 minutes with basic hand tools.
The Genuine OEM WP8573069 Heating Element is the correct replacement when your Whirlpool or Maytag electric dryer produces no heat, only heats on certain settings, or takes far too long to dry clothes. This dual-coil element restores both high and low heat operation. Classic symptoms: dryer drum spins but air stays cold, or high heat works but low/medium does not.
Common Symptoms This Part Fixes
Dryer runs but produces no heat at all
Clothes still damp after a full cycle
High heat works but low or medium heat does not
Dryer takes much longer than normal to dry a load
Visible break or damage in the heating coil
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we have included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This heating element replaces the following part numbers:
WP8573069, 8573069, 1201501, AP6013455, AWP49202, EAP11746681, PD00003935, PS11746681
If your old element or parts diagram shows any of these numbers, this is the correct replacement.
Compatibility
This heating element is listed for select Whirlpool and Maytag electric dryers, including:
Whirlpool: WED6400SB0, WED6400SB1, WED6400SG0, WED6400SG1, WED6400SW0, WED6400SW1
Maytag: MED6300TQ0, MED6400TB0, MED6400TQ0
Note: This is a dual-coil element specific to certain Cabrio-platform dryers and is not interchangeable with elements 279838 or 8544771. Confirm your model number before ordering, or contact our support team and we will verify compatibility.
Key Features
Genuine OEM Whirlpool heating element, not an aftermarket equivalent
Dual-coil design provides true variable heat for high and low temperature settings
Nickel-chrome alloy wire resists oxidation and maintains consistent heat output
Complete assembly includes coils, frame, and insulators
Direct replacement for original part 8573069 with updated WP prefix
240V electric dryer element — not for gas dryers
Product Specifications
Part Number
WP8573069
OEM Part Number
WP8573069
Condition
New
Brand
Whirlpool
Part Type
Dryer Heating Element
Element Design
Dual Coil (Two-Level Heat)
Voltage
240V
Material
Nickel-Chrome Alloy
Compatible Brands
Whirlpool, Maytag
Estimated Install Time
30–60 Minutes
Disconnect the dryer from the electrical outlet or turn off the circuit breaker before starting any repair. This is a 240V element and the dryer's wiring carries hazardous voltage. Allow the dryer to cool completely before handling the element. Wear work gloves to protect your hands from sharp metal edges on the element frame. After installation, test both high and low heat settings to confirm both coils are operating. If the element trips the breaker or the thermal fuse blows immediately after installation, check for a short in the wiring or a grounded coil before running the dryer again.
Frequently Asked Questions
How do I know if my dryer heating element has failed?
The most common sign is a dryer that runs but produces no heat, leaving clothes damp after a full cycle. On a dual-coil element like the WP8573069, a partial failure can also show up as heat on one setting but not another. A visual inspection may reveal a break in one of the coils, or you can test continuity across each coil terminal with a multimeter.
What is the difference between a single-coil and dual-coil dryer element?
A single-coil element has one resistance wire and produces one level of heat. The dryer controls temperature by cycling the element on and off. A dual-coil element like the WP8573069 has two separate coils, allowing the dryer to run one coil for low heat or both coils simultaneously for high heat. This gives smoother and more precise temperature control.
Can I use this element in a gas dryer?
No. This is a 240V electric heating element designed exclusively for electric dryers. Gas dryers use a burner assembly with an igniter and gas valve, which are completely different components. Installing an electric element in a gas dryer is not possible.
Why did my heating element burn out?
The most common cause is restricted airflow. A clogged lint filter, kinked exhaust hose, or blocked exterior vent forces the element to run hotter and longer than designed, which accelerates coil fatigue. A failed cycling thermostat that does not shut the element off at the correct temperature can also shorten element life. When replacing the element, always clean the full vent path and check the thermostat.
Is part number 8573069 the same as WP8573069?
Yes. Whirlpool added the WP prefix to many of its part numbers during a numbering system update. The part itself is identical. If your old element or parts diagram shows 8573069 without the WP prefix, this WP8573069 is the current replacement.
Product form
WP8573069 Dryer Genuine OEM Heating Element
Online Shipped Price
$180.00
List Price
$159.80 You Save: $20.20 Delivered to your address
Store Walk-In
$145.50 Walk-In Savings: $14.30 In-store purchase only — not valid for online checkout
✓
IN STOCK
✓
Ships Today
if ordered within
--:--:--
Description
WP8573069 Dryer Genuine OEM Heating Element
The WP8573069 is a genuine OEM dual-coil heating element manufactured by Whirlpool for select Whirlpool and Maytag electric dryers. Unlike single-coil elements that run at one fixed wattage, this element uses two separate nickel-chrome alloy coils wound on the same frame. One coil handles the lower heat settings while both coils fire together for high heat, giving the dryer true variable temperature control instead of cycling a single coil on and off.
This dual-coil design is specific to certain Cabrio-platform dryers and is not interchangeable with other common Whirlpool heating elements such as 279838 or 8544771. When either coil fails, the dryer may lose heat entirely or heat only on certain settings. The WP8573069 is the complete element assembly — coils, frame, and insulators — ready to install in about 30 to 60 minutes with basic hand tools.
The Genuine OEM WP8573069 Heating Element is the correct replacement when your Whirlpool or Maytag electric dryer produces no heat, only heats on certain settings, or takes far too long to dry clothes. This dual-coil element restores both high and low heat operation. Classic symptoms: dryer drum spins but air stays cold, or high heat works but low/medium does not.
Common Symptoms This Part Fixes
Dryer runs but produces no heat at all
Clothes still damp after a full cycle
High heat works but low or medium heat does not
Dryer takes much longer than normal to dry a load
Visible break or damage in the heating coil
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we have included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This heating element replaces the following part numbers:
WP8573069, 8573069, 1201501, AP6013455, AWP49202, EAP11746681, PD00003935, PS11746681
If your old element or parts diagram shows any of these numbers, this is the correct replacement.
Compatibility
This heating element is listed for select Whirlpool and Maytag electric dryers, including:
Whirlpool: WED6400SB0, WED6400SB1, WED6400SG0, WED6400SG1, WED6400SW0, WED6400SW1
Maytag: MED6300TQ0, MED6400TB0, MED6400TQ0
Note: This is a dual-coil element specific to certain Cabrio-platform dryers and is not interchangeable with elements 279838 or 8544771. Confirm your model number before ordering, or contact our support team and we will verify compatibility.
Key Features
Genuine OEM Whirlpool heating element, not an aftermarket equivalent
Dual-coil design provides true variable heat for high and low temperature settings
Nickel-chrome alloy wire resists oxidation and maintains consistent heat output
Complete assembly includes coils, frame, and insulators
Direct replacement for original part 8573069 with updated WP prefix
240V electric dryer element — not for gas dryers
Product Specifications
Part Number
WP8573069
OEM Part Number
WP8573069
Condition
New
Brand
Whirlpool
Part Type
Dryer Heating Element
Element Design
Dual Coil (Two-Level Heat)
Voltage
240V
Material
Nickel-Chrome Alloy
Compatible Brands
Whirlpool, Maytag
Estimated Install Time
30–60 Minutes
Disconnect the dryer from the electrical outlet or turn off the circuit breaker before starting any repair. This is a 240V element and the dryer's wiring carries hazardous voltage. Allow the dryer to cool completely before handling the element. Wear work gloves to protect your hands from sharp metal edges on the element frame. After installation, test both high and low heat settings to confirm both coils are operating. If the element trips the breaker or the thermal fuse blows immediately after installation, check for a short in the wiring or a grounded coil before running the dryer again.
Frequently Asked Questions
How do I know if my dryer heating element has failed?
The most common sign is a dryer that runs but produces no heat, leaving clothes damp after a full cycle. On a dual-coil element like the WP8573069, a partial failure can also show up as heat on one setting but not another. A visual inspection may reveal a break in one of the coils, or you can test continuity across each coil terminal with a multimeter.
What is the difference between a single-coil and dual-coil dryer element?
A single-coil element has one resistance wire and produces one level of heat. The dryer controls temperature by cycling the element on and off. A dual-coil element like the WP8573069 has two separate coils, allowing the dryer to run one coil for low heat or both coils simultaneously for high heat. This gives smoother and more precise temperature control.
Can I use this element in a gas dryer?
No. This is a 240V electric heating element designed exclusively for electric dryers. Gas dryers use a burner assembly with an igniter and gas valve, which are completely different components. Installing an electric element in a gas dryer is not possible.
Why did my heating element burn out?
The most common cause is restricted airflow. A clogged lint filter, kinked exhaust hose, or blocked exterior vent forces the element to run hotter and longer than designed, which accelerates coil fatigue. A failed cycling thermostat that does not shut the element off at the correct temperature can also shorten element life. When replacing the element, always clean the full vent path and check the thermostat.
Is part number 8573069 the same as WP8573069?
Yes. Whirlpool added the WP prefix to many of its part numbers during a numbering system update. The part itself is identical. If your old element or parts diagram shows 8573069 without the WP prefix, this WP8573069 is the current replacement.
WP8573069, 8573069, 1201501, AP6013455, AWP49202, EAP11746681, PD00003935, PS11746681
