XPARTCO 12138200000320 Dryer Door Catch
The XPARTCO 12138200000320 is an aftermarket replacement dryer door catch compatible with select Midea and Insignia dryers. The door catch is a small plastic spring-clip mechanism mounted on the dryer door that snaps over the door strike o12138200000320 n the cabinet opening to hold the door firmly closed during operation. When the door is closed and latched, the door switch is activated — signaling the control board that it is safe to run. When the catch breaks, cracks, or loses its spring tension, the door will not stay closed, the door switch will not activate properly, and the dryer will either not start or will stop mid-cycle.
This is a snap-in replacement catch — the color or exact finish may vary by production run. It directly replaces AP7152622 and PS18161385. Sold individually. Installs in under 5 minutes — no tools required in most cases.
Quick Answer
The XPARTCO 12138200000320 Dryer Door Catch fixes Midea and Insignia dryers where the door won't stay closed, pops open during a cycle, or where the dryer won't start because the door switch isn't being activated. Snap-in installation — no tools required, installs in under 5 minutes. Sold individually. Replaces AP7152622, PS18161385.
Common Problems This Part Fixes
- Dryer door will not stay closed during the drying cycle
- Door pops open mid-cycle, stopping the dryer
- Dryer will not start — door switch not being activated by a worn or broken catch
- Door feels loose or does not click shut firmly when closed
- Door catch visibly cracked, broken, or missing
- Dryer requires the door to be held or pushed to stay running
Replaces Part Numbers
This door catch directly replaces the following part numbers:
12138200000320, AP7152622, PS18161385.
Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This door catch is compatible with select dryers from the following brands:
- Midea dryers (gas and electric — select models)
- Insignia dryers (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
- Holds the dryer door closed and activates the door switch so the dryer can run safely
- Snap-in installation — no tools required in most cases; installs in under 5 minutes
- Durable plastic construction — designed to withstand repeated opening and closing
- Sold individually — one door catch per order
- Replaces AP7152622 and PS18161385
- Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
| Part Number |
12138200000320 |
| Part Type |
Dryer Door Catch (Door Latch Clip) |
| Condition |
Aftermarket Replacement |
| Application |
Gas and Electric Dryers |
| Material |
Plastic |
| Installation |
Snap-in — no tools required |
| Sold As |
Single door catch |
| Compatible Brands |
Midea, Insignia |
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Open the dryer door and locate the old door catch — it is a small plastic clip mounted on the inside of the door or on the cabinet opening around the door. Press the tabs on the old catch to release it from its mounting slot and pull it free. Note the orientation before removing. Insert the new 12138200000320 catch into the slot in the same orientation and press firmly until it snaps into place. Close the door to confirm it latches securely. Restore power and run a short cycle to verify the door stays closed and the dryer operates normally. Tools needed: None in most cases; a small flat-head screwdriver may help with removal.
Frequently Asked Questions
What dryers is the 12138200000320 compatible with?
The 12138200000320 door catch is used on select Midea and Insignia dryer models. Insignia is a Best Buy house brand whose appliances are manufactured by Midea. Always verify your exact model number before ordering to confirm this catch fits your dryer's door latch assembly.
Why won't my dryer start even though I'm closing the door?
If the door catch is broken or worn, the door may not be engaging the door switch firmly enough to signal the control board that the door is closed. Most dryers will not run unless the door switch is fully activated. Replacing the 12138200000320 catch restores the firm snap needed to trigger the switch. If replacing the catch does not resolve the start issue, the door switch itself may also need to be checked.
Do I need to replace the door strike as well?
Not necessarily. In most cases only the door catch (the spring-clip on the door) needs replacement. The door strike (the post or tab on the cabinet that the catch snaps onto) is typically more durable. Inspect the strike for cracks or breakage before ordering — if it is intact, just the 12138200000320 catch is all you need.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Midea OEM part, but is manufactured from durable plastic to match the dimensions and function of the original 12138200000320 door catch.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
