XPARTCO 279816 Dryer Thermostat Kit – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe, consistent dryer heating with the XPARTCO 279816 Dryer Thermostat Kit. This dryer thermal cut-off kit is a replacement part for specific Maytag, Kenmore, Roper, Whirlpool dryer models. It is designed to prevent the dryer from overheating. Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.
XPARTCO is a trusted aftermarket brand offering reliable appliance replacement parts designed to meet OEM-equivalent specifications at a more affordable price.
Replaces Part Numbers
279816, 279816VP, 3399848, 3977393, PD00002348, EAP334299, AH334299, EA334299, AP3094244, PS334299.
Compatibility
This replacement dryer thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):
Always verify your dryer’s model number before ordering.
Contact our support team if you’re unsure.
✅ Key Features
-
🔄 Aftermarket Replacement Kit – Built to OEM-equivalent temperature specifications
-
🌡️ Accurate Heat Regulation – Helps maintain proper drying temperatures
-
🔥 Overheat Protection – Reduces risk of thermal fuse failure
-
💰 Cost-Effective Repair – Reliable alternative to higher-priced OEM kits
-
🛡️ Fixes Common Issues – Solves no heat, overheating, long dry times, or cycling problems
📐 Product Specification
-
Part Number: 279816
-
Component Type: Dryer Thermostat Kit, L250-80F high limit and 309F thermal fuse with jumper wire.
-
Includes: Cycling thermostat, high-limit thermostat, thermal fuse
-
Application: Heater housing / exhaust temperature control
-
Material: Heat-resistant metal thermostat housings
-
Mounting: Screw-mounted
-
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
-
Disconnect dryer power.
-
Remove the rear access panel.
-
Locate thermostats and thermal fuse on the heater housing.
-
Disconnect wiring and remove old components.
-
Install the new XPARTCO 279816 components in the same positions.
-
Reconnect wiring, reinstall panel, and restore power.
-
Run a test cycle to confirm proper heating.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
Restore proper dryer heat control and safety — Add to Cart Now for a dependable, budget-friendly repair!
