XP6500JB2001B Refrigerator Temperature Sensor — XPARTCO Aftermarket Replacement
The XP6500JB2001B is an XPARTCO aftermarket temperature sensor (thermistor) that replaces the LG 6500JB2001B in LG and Kenmore refrigerators. This sensor is a negative temperature coefficient (NTC) thermistor — its electrical resistance drops as temperature rises and increases as temperature falls. The main control board reads that resistance continuously and uses it to cycle the compressor and evaporator fan on and off, holding the refrigerator compartment at the set temperature.
When the thermistor fails, the control board loses its temperature reference. Depending on how the sensor fails — open, shorted, or drifted out of range — the refrigerator may run the compressor nonstop, shut it off entirely, or swing between too warm and too cold. Because the sensor is a passive component with no moving parts, failure is usually gradual: readings drift over time until the board can no longer regulate temperature accurately. The XP6500JB2001B matches the OEM resistance curve and connector, restoring accurate temperature feedback without modification.
QUICK ANSWER
Will This Fix Your Refrigerator?
If your LG or Kenmore refrigerator is too warm, too cold, running constantly, or displaying a temperature-related error code, the thermistor is one of the first components to check. The XP6500JB2001B replaces the original LG 6500JB2001B and restores accurate temperature sensing so the control board can regulate cooling properly. A quick resistance test with a multimeter confirms whether the sensor has failed before you order.
Common Symptoms
- Refrigerator compartment is too warm — food spoils quickly
- Refrigerator compartment is too cold — items freeze on shelves
- Compressor runs continuously without cycling off
- Compressor does not run at all
- Temperature fluctuates widely despite a steady setpoint
- Error code displayed on control panel related to temperature sensing
Cross Reference Information
The XP6500JB2001B replaces the following OEM and catalog part numbers. If any of these appear on your existing sensor, in a parts diagram, or in a service manual, this is the correct aftermarket replacement.
XP6500JB2001B, 6500JB2001B, 6500JB1003G, 6500JB1005J, 6500JB2001X, 6500JK1003A, ALG52178, AH3529165, AP4441492, EA3529165, EAP3529165, PD00006662, PS3529165
COMPATIBILITY
This aftermarket sensor fits select LG and Kenmore refrigerators. The original 6500JB2001B is listed for over 1,400 models. Always verify your model number before ordering.
Sample compatible models: LFX25960ST, LFX25961SB, LFX25976ST, LMXS30776S, LMX25964ST, 79551012010, 79574015410, 79578543804, LFXS26973S, LFX31925ST
Key Features
- XPARTCO aftermarket replacement for LG 6500JB2001B temperature sensor
- NTC thermistor — matches OEM resistance curve for accurate temperature readings
- Same connector and lead length as the original — direct plug-in replacement
- Compatible with LG and Kenmore refrigerator models
- Supersedes earlier LG part numbers 6500JB1003G, 6500JB1005J, and 6500JK1003A
- Quick installation — 15 to 30 minutes with no special tools
Specifications
| Part Number |
XP6500JB2001B |
| OEM Part Number |
6500JB2001B |
| Condition |
Aftermarket |
| Brand |
XPARTCO |
| Part Type |
Temperature Sensor (Thermistor) |
| Appliance Type |
Refrigerator |
| Sensor Type |
NTC Thermistor |
| Compatible Brands |
LG, Kenmore |
Safety Warning
Unplug the refrigerator from the wall outlet before replacing the temperature sensor. The sensor connects to the control board with a low-voltage harness, but disconnecting power prevents any risk of shock and protects the electronics from short circuits during the swap. After installing the new sensor, allow the refrigerator 24 hours to stabilize at the set temperature before adjusting the controls.
Frequently Asked Questions
How does a refrigerator thermistor work?
The thermistor is a resistor whose resistance changes predictably with temperature. In an NTC (negative temperature coefficient) thermistor like the 6500JB2001B, resistance decreases as temperature rises and increases as temperature drops. The control board applies a small voltage across the thermistor, reads the resistance, and converts it to a temperature value. That value determines when the compressor and evaporator fan cycle on and off to maintain the target temperature.
What happens when the thermistor fails open versus shorted?
An open thermistor (infinite resistance) tells the board the compartment is extremely cold, so the board may shut the compressor off entirely — the refrigerator stops cooling and warms up. A shorted thermistor (near-zero resistance) tells the board the compartment is extremely warm, so the compressor runs nonstop trying to reach a temperature it believes it has not hit. Either failure mode produces a clearly abnormal result, and a quick multimeter check confirms which condition you have.
Is the XPARTCO sensor calibrated the same as the LG original?
Yes. The XP6500JB2001B matches the OEM resistance-versus-temperature curve, so the control board interprets its readings the same way it would the factory sensor. The connector, lead wire length, and mounting are also identical. The board does not need to be recalibrated or reset after installing this aftermarket replacement — it reads the new sensor the same way it read the original.
My refrigerator runs constantly — is it the thermistor or the compressor?
A constantly running compressor is one of the most common symptoms of a failed thermistor, but it can also point to a sealed-system issue, a dirty condenser, or a failed evaporator fan. Start with the thermistor because it is the easiest and cheapest to test. Unplug the refrigerator, disconnect the sensor harness, and measure resistance across the thermistor leads. Compare the reading to the expected value for the current compartment temperature. If the resistance is far off or reads OL (open), the thermistor is the cause.
Does this sensor also measure humidity?
Some listings describe the 6500JB2001B as a "temperature thermistor humidity sensor" because the assembly may include a humidity-sensing element alongside the thermistor in certain LG models. The XP6500JB2001B replaces the full assembly, matching the original in both temperature and humidity sensing capability where applicable.
XPARTCO Aftermarket Part
Fast Shipping
In Stock
15–30 Min Install