XPARTCO 6602-001655 Dryer Drum Belt

Description

XPARTCO 6602-001655 Dryer Drum Belt

The XPARTCO 6602-001655 is an aftermarket replacement dryer drum belt compatible with select Samsung and Kenmore dryers. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.

Made from premium neoprene rubber reinforced with polyester cords, this 5-rib belt measures 92 inches long x 5/16 inch wide and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It is a direct drop-in replacement for OEM part numbers 6602-001655 and 6602-001314, and installs in 30–45 minutes with basic hand tools.

Quick Answer

The XPARTCO 6602-001655 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer during operation. It drives the drum via the motor and idler pulleys. Compatible with select Samsung and Kenmore dryers. Measures 92" L x 5/16" W with 5 ribs and 4 grooves.

Common Problems This Part Fixes

  • Dryer drum not spinning — motor runs but drum stays still
  • Clothes not tumbling during the drying cycle
  • Thumping, squealing, or slapping noise during operation
  • Dryer runs but produces no heat because drum is stationary
  • Visible broken or frayed belt pieces found inside the dryer cabinet
  • Dryer shuts off shortly after starting due to drum not rotating

Replaces Part Numbers

This drum belt directly replaces the following OEM and cross-reference part numbers:

6602-001655, 6602-001314, 5PH2337, LB1655, ASM874658, PD00002012, EAP2407938, AP4373659, PS4133825.

If your part number is not listed above, contact our support team before ordering and we will verify compatibility.

Compatibility

This drum belt is compatible with select dryers from the following brands:

  • Samsung dryers (gas and electric)
  • Kenmore / Sears dryers (select models)

Always verify your appliance model number before ordering. Contact our support team if you're unsure.

Key Features

  • Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
  • 92" length x 5/16" width — 5-rib, 4-groove design for a secure, slip-free grip on the pulleys
  • Made from premium neoprene rubber with polyester cord reinforcement — resists cracking, stretching, and heat damage
  • Direct replacement for OEM part numbers 6602-001655 and 6602-001314 — no modification required
  • Aftermarket replacement built to OEM-equivalent quality standards
  • DIY-friendly repair — installs in 30–45 minutes with basic hand tools
  • Often replaced together with the idler pulley (DC93-00634A) and drum rollers (DC97-16782A) for a complete drum drive repair

Product Specifications

Part Number 6602-001655
Part Type Dryer Drum Drive Belt
Condition Aftermarket Replacement
Application Gas and Electric Dryers
Length 92 inches
Width 5/16 inch
Height 1/8 inch
Ribs 5 ribs, 4 grooves
Material Neoprene rubber with polyester cord reinforcement
Color Black
Compatible Brands Samsung, Kenmore
Often Replaced With DC93-00634A Idler Pulley, DC97-16782A Drum Rollers

Installation Notes

⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum belt, remove the top panel and front panel of the dryer. Lift the drum out of the cabinet, remove the old belt, and loop the new 6602-001655 belt around the drum with the ribbed side facing inward. Route the belt slack around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific video for the correct belt path around the pulleys. Reassemble the front panel, top panel, and restore power before running a test cycle. Tip: While the drum is out, this is an ideal time to also inspect and replace the idler pulley and drum support rollers if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.

Frequently Asked Questions

Will the 6602-001655 fit my Samsung or Kenmore dryer?

This belt is compatible with select Samsung and Kenmore dryers. Use the model search above to verify your model number, or contact our support team before ordering.

What does the dryer drum belt do?

The drum belt wraps around the outside of the dryer drum and connects to the motor pulley and idler pulley. As the motor spins, it drives the belt which causes the drum to rotate, tumbling your clothes through the heated air to dry them. A broken or worn belt means the drum cannot spin.

How do I know if my drum belt is broken?

The most obvious sign is that the dryer motor runs and you can hear it humming, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is slipping or partially broken. Opening the dryer cabinet and visually inspecting the belt will confirm if it is broken, frayed, or stretched.

Should I replace the idler pulley and drum rollers at the same time?

Yes — since you need to disassemble the dryer to replace the belt anyway, it is highly recommended to also inspect and replace the idler pulley (DC93-00634A) and drum support rollers (DC97-16782A) at the same time. These parts wear at a similar rate and replacing all three together prevents having to disassemble the dryer again in the near future.

Is this an OEM or aftermarket part?

This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from premium neoprene rubber with polyester cord reinforcement to match the dimensions and performance of the original belt.

Shop With Confidence

A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.

✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Product form

XPARTCO 6602-001655 Dryer Drum Belt

Free pickup in our shop(s)

$22.00 $12.50

🔍 CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check compatibility.

View Full Compatibility List ↓

      Description

      XPARTCO 6602-001655 Dryer Drum Belt

      The XPARTCO 6602-001655 is an aftermarket replacement dryer drum belt compatible with select Samsung and Kenmore dryers. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.

      Made from premium neoprene rubber reinforced with polyester cords, this 5-rib belt measures 92 inches long x 5/16 inch wide and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It is a direct drop-in replacement for OEM part numbers 6602-001655 and 6602-001314, and installs in 30–45 minutes with basic hand tools.

      Quick Answer

      The XPARTCO 6602-001655 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer during operation. It drives the drum via the motor and idler pulleys. Compatible with select Samsung and Kenmore dryers. Measures 92" L x 5/16" W with 5 ribs and 4 grooves.

      Common Problems This Part Fixes

      • Dryer drum not spinning — motor runs but drum stays still
      • Clothes not tumbling during the drying cycle
      • Thumping, squealing, or slapping noise during operation
      • Dryer runs but produces no heat because drum is stationary
      • Visible broken or frayed belt pieces found inside the dryer cabinet
      • Dryer shuts off shortly after starting due to drum not rotating

      Replaces Part Numbers

      This drum belt directly replaces the following OEM and cross-reference part numbers:

      6602-001655, 6602-001314, 5PH2337, LB1655, ASM874658, PD00002012, EAP2407938, AP4373659, PS4133825.

      If your part number is not listed above, contact our support team before ordering and we will verify compatibility.

      Compatibility

      This drum belt is compatible with select dryers from the following brands:

      • Samsung dryers (gas and electric)
      • Kenmore / Sears dryers (select models)

      Always verify your appliance model number before ordering. Contact our support team if you're unsure.

      Key Features

      • Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
      • 92" length x 5/16" width — 5-rib, 4-groove design for a secure, slip-free grip on the pulleys
      • Made from premium neoprene rubber with polyester cord reinforcement — resists cracking, stretching, and heat damage
      • Direct replacement for OEM part numbers 6602-001655 and 6602-001314 — no modification required
      • Aftermarket replacement built to OEM-equivalent quality standards
      • DIY-friendly repair — installs in 30–45 minutes with basic hand tools
      • Often replaced together with the idler pulley (DC93-00634A) and drum rollers (DC97-16782A) for a complete drum drive repair

      Product Specifications

      Part Number 6602-001655
      Part Type Dryer Drum Drive Belt
      Condition Aftermarket Replacement
      Application Gas and Electric Dryers
      Length 92 inches
      Width 5/16 inch
      Height 1/8 inch
      Ribs 5 ribs, 4 grooves
      Material Neoprene rubber with polyester cord reinforcement
      Color Black
      Compatible Brands Samsung, Kenmore
      Often Replaced With DC93-00634A Idler Pulley, DC97-16782A Drum Rollers

      Installation Notes

      ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. To access the drum belt, remove the top panel and front panel of the dryer. Lift the drum out of the cabinet, remove the old belt, and loop the new 6602-001655 belt around the drum with the ribbed side facing inward. Route the belt slack around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific video for the correct belt path around the pulleys. Reassemble the front panel, top panel, and restore power before running a test cycle. Tip: While the drum is out, this is an ideal time to also inspect and replace the idler pulley and drum support rollers if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool.

      Frequently Asked Questions

      Will the 6602-001655 fit my Samsung or Kenmore dryer?

      This belt is compatible with select Samsung and Kenmore dryers. Use the model search above to verify your model number, or contact our support team before ordering.

      What does the dryer drum belt do?

      The drum belt wraps around the outside of the dryer drum and connects to the motor pulley and idler pulley. As the motor spins, it drives the belt which causes the drum to rotate, tumbling your clothes through the heated air to dry them. A broken or worn belt means the drum cannot spin.

      How do I know if my drum belt is broken?

      The most obvious sign is that the dryer motor runs and you can hear it humming, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is slipping or partially broken. Opening the dryer cabinet and visually inspecting the belt will confirm if it is broken, frayed, or stretched.

      Should I replace the idler pulley and drum rollers at the same time?

      Yes — since you need to disassemble the dryer to replace the belt anyway, it is highly recommended to also inspect and replace the idler pulley (DC93-00634A) and drum support rollers (DC97-16782A) at the same time. These parts wear at a similar rate and replacing all three together prevents having to disassemble the dryer again in the near future.

      Is this an OEM or aftermarket part?

      This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from premium neoprene rubber with polyester cord reinforcement to match the dimensions and performance of the original belt.

      Shop With Confidence

      A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.

      ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

      dryer belt replacement, samsung dryer belt, 6602-001655 belt, dryer not spinning fix, dryer repair part

      Model Compatibility

      Search your appliance model number below. Supports partial or full model search.

      🔍 CHECK YOUR MODEL COMPATIBILITY

      Type your full or partial model number above to instantly check if this part fits your appliance.

      Guaranteed Fit — exact model match found.
      No matching model found. Please verify your full model number or contact support.
      Loading compatible models...
      Model Number Manufacturer Appliance Type

      ⚠️ Note: This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.

      Recently viewed products

      © 2026 Parts-O-Matic,

        • Amazon
        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • USDC
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account