XPARTCO 6931EL3002M Dryer Blower Thermostat – Compatible with LG and Kenmore Dryers
Product Description
Restore proper temperature regulation in your dryer with the XPARTCO 6931EL3002M Dryer Blower Thermostat. This Dryer Blower Thermostat is a replacement part for select LG dryer models. It plays a role in regulating the operation of the blower motor, which is responsible for circulating hot air throughout the dryer during the drying cycle. Common causes of a bad dryer blower thermostat can include electrical malfunctions, physical damage, or simply wear and tear over time.
Replaces Part Numbers
6931EL3002M, 6931EL3002A, 6931EL3002K, PD00023476, EAP8747887, AP5782317, PS8747887.
Compatibility
This replacement blower thermostat (mounts on blower housing). fits select LG and Kenmore (manufactured by LG) dryers.
Example compatible models include (but are not limited to):
LG DLE5977W, DLE3170W, DLEX3470V, and Kenmore 796.81022900.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
-
🔄 Aftermarket Replacement – Matches OEM temperature control performance
-
🌡️ Accurate Temperature Regulation – Maintains proper blower housing heat levels. Thermostat 85C, 185F.
-
💰 Budget-Friendly Option – Provides OEM-level reliability at a lower price
-
🛠️ Easy Installation – Direct-fit design with standard mounting hardware
-
🛡️ Fixes Common Issues – Solves overheating, no-heat problems, long dry times, and auto-shutoff issues
📐 Product Specification
-
Part Number: 6931EL3002M
-
Component Type: Dryer Blower Thermostat
-
Material: Metal thermostat housing with bimetal sensor
-
Temperature Rating: Opens/closes at OEM-equivalent temperature thresholds
-
Mounting: Two-screw mounting to blower housing
-
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing repairs to prevent electrical shock and injury.
Steps:
-
Disconnect power and remove the dryer’s rear access panel.
-
Locate the blower housing and identify the thermostat.
-
Remove the mounting screws and disconnect the wiring.
-
Install the new XPARTCO 6931EL3002M thermostat in the same position.
-
Reconnect wires, reinstall the panel, and restore power.
-
Run a test cycle to confirm proper temperature cycling.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
Restore safe temperature control — Add to Cart Now for a reliable, cost-effective repair!
