Description
XPARTCO DC93-00634A Dryer Idler Pulley – Compatible with Samsung & Kenmore Dryers
Product Description
Restore proper belt tension and smooth dryer operation with the XPARTCO DC93-00634A Dryer Idler Pulley. This replacement Idler Pulley Assembly is an essential component for many specific dryer models by Samsung. The idler pulley is also known as a dryer pulley. It handles keeping the dryer drive belt at the right level of tension as it wraps around the drum of the dryer. This quality assembly includes a pulley wheel and center axle that rotates on a bearing to ensure the proper operation of the dryer. Over the time, the idler pulley assembly can wear out or break, leading to issues such as a dryer that won't start or loud noises.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, PD00032419, EAP11771601, AP6038887, PS11771601.
Compatibility
This replacement dryer idler pulley fits select Samsung and Kenmore (Samsung-manufactured) electric dryers.
Example compatible models include (but are not limited to):
-
Samsung DV42H5000EW, DV45H7000EW
-
Kenmore 592.89003, 592.89004
Always verify your dryer’s model number before ordering.
Contact our support team if you’re unsure.
✅ Key Features
-
🔄 Aftermarket Replacement – Matches OEM fit and belt-tension performance
-
🌀 Maintains Proper Belt Tension – Ensures smooth, consistent drum rotation
-
🔇 Reduces Noise & Vibration – Helps eliminate squealing or grinding sounds
-
💪 Durable Bearing Construction – Designed for long service life
-
💰 Cost-Effective Repair – Reliable alternative to OEM idler pulleys
📐 Product Specification
-
Part Number: DC93-00634A
-
Component Type: Dryer Idler Pulley
-
Material: High-strength pulley wheel with internal bearing
-
Application: Dryer belt tensioning system
-
Mounting: Shaft-mounted with retaining clip
-
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, needle-nose pliers
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Basic Steps:
-
Disconnect dryer power.
-
Open the dryer cabinet and remove the drum.
-
Locate the idler pulley near the motor.
-
Remove the retaining clip and old pulley.
-
Install the new XPARTCO DC93-00634A idler pulley.
-
Reinstall the belt and drum, then reassemble the dryer.
-
Restore power and run a test cycle.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
Restore smooth, quiet dryer operation — Add to Cart Now for a dependable, budget-friendly repair!
