XPARTCO W10225581 Refrigerator Defrost Thermostat – Replaces WPW10225581 – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Kenmore Refrigerators
Product Description
Prevent frost buildup and maintain consistent cooling with the XPARTCO W10225581 Refrigerator Defrost Thermostat. This Defrost Thermostat is a reliable replacement for WPW10225581. With top-notch performance and precise temperature control, it effectively regulates your refrigerator's defrost cycle, ensuring your food stays fresh for longer. Keep your fridge running smoothly with this high-quality thermostat.
Replaces Part Numbers
WPW10225581, W10225581, 1872722, 2149849, 2161331, 2176066, 2188824, 2196155, 2266066, 2266067, 2315504, 2317087, 2319914, 2321799, 2321802, 4387498, W10260437, WPW10225581VP, PD00002717, EAP11750673, AP6017375, PS11750673.
Compatibility
This replacement defrost thermostat fits select Whirlpool, Maytag, Amana, KitchenAid, Estate, Roper, Jenn-Air, and Kenmore refrigerators.
Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2055YEM00, and Amana ASD2575BRW01.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
-
🔄 Aftermarket Replacement – Designed to meet OEM performance and reliability standards
-
❄️ Automatic Defrost Control – Activates the heater to melt frost buildup on coils
-
💰 Cost-Effective Solution – Dependable performance at a lower cost than OEM parts
-
🛠️ Easy Installation – Pre-wired design for quick, direct replacement
-
🛡️ Fixes Common Issues – Solves frost buildup, poor cooling, or water under crisper drawers
📐 Product Specification
-
Part Number: W10225581 (Replaces WPW10225581)
-
Component Type: Refrigerator Defrost Thermostat
-
Material: Metal temperature sensor with insulated wiring leads
-
Temperature Rating: Opens at 48°F, closes at 15°F (varies slightly by model)
-
Mounting: Clips onto evaporator tubing inside freezer compartment
-
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, wire cutter/stripper, electrical tape or heat-shrink connectors
⚠️ Safety First: Always unplug the refrigerator before performing repairs to prevent electrical shock.
Steps:
-
Disconnect power and remove the freezer shelves and back panel.
-
Locate the defrost thermostat clipped to the evaporator tubing.
-
Cut the old thermostat wires near the connector.
-
Install the new XPARTCO W10225581 thermostat using wire connectors or solder joints.
-
Clip the thermostat securely back onto the evaporator coil.
-
Reinstall panels and restore power.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
Stop frost buildup and restore cooling efficiency — Add to Cart Now for a reliable, budget-friendly repair!
