Genuine OEM WH49X27322 Washer Transmission Platform Assembly Kit
The Genuine OEM GE WH49X27322 is the transmission platform assembly and nut kit for select GE washer-dryer combo units. The platform supports the transmission and keeps it aligned with the drum. When it wears, cracks or shifts out of alignment, the unit can make clunking or grinding noises during the spin cycle or vibrate heavily.
This is the original GE part, not an aftermarket equivalent. It is sold as a kit. Check your model number before ordering.
Quick Answer
The Genuine OEM WH49X27322 Transmission Platform Assembly Kit replaces the transmission platform and nut on a compatible GE washer-dryer combo when the platform has worn or failed. Classic symptoms: loud clunking or grinding during the spin cycle, or excessive vibration.
Common Problems This Part Fixes
Loud clunking or grinding noise during the spin cycle
Excessive vibration or shaking
Worn, cracked or misaligned transmission platform
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This transmission platform kit is listed under the following part number:
WH49X27322, 4588460, AGE26889, AP6328404, EAP12343556, PD00053354, PS12343556
If your old platform shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for GE washer-dryer combo units, including these examples:
GE GUD24ESSM0WW, GUD24ESSM1WW, GUD24GSSM0WW, GUD24GSSM1WW
GE GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSSM0WW, GUD27GSSM1WW, GUD27ESPM0DG, GUD27GSPM0DG
GE GUV27ESSM0WW, GUV27ESSM1WW, XUD27ESSM0WW, XUD27GSSM0WW
Note: The models above are a sample of 27 that retailers list, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Transmission platform assembly and nut kit
Supports the transmission and keeps it aligned with the drum
Sold as a kit
Product Specifications
Part Number
WH49X27322
OEM Part Number
WH49X27322
Part Type
Washer Transmission Platform Assembly Kit
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Kit
Application
Select GE Washer-Dryer Combos
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the unit and turn off the water supply before you begin. This repair involves the transmission area and is best done with a second person and your model's service guide. Remove the cabinet panels to reach the transmission, remove the screws holding the old platform, install the new platform with the drum and transmission aligned, and secure it with the nut and screws. Reassemble, restore power and water, and run a test cycle.
Frequently Asked Questions
My unit clunks or grinds on spin. Is this the part I need?
It can be. A worn or cracked platform can cause noise and vibration, but worn bearings, drive parts or a loose load can cause similar symptoms. Confirm the platform is the problem before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
What is in the kit?
It is sold as the transmission platform assembly and nut kit. Retailers do not list the exact contents, so contact our support team if you need to confirm them before ordering.
Will this fit my washer-dryer?
It is listed for 27 GE washer-dryer combo models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH23X35712 Washer Water Valve
The Genuine OEM GE WH23X35712 is an electromagnetic (solenoid) water valve for GE, Hotpoint, and Kenmore washers. The valve connects your home's water supply to the washer. It opens when the control energizes it to let water into the washer and shuts off to prevent overfilling. When it fails, the washer may not fill, may fill intermittently, or may fill slowly or weakly.
This is the original GE part. GE washers use several different water valves that look alike, so confirm the part number against your model before ordering.
Quick Answer
The Genuine OEM WH23X35712 Water Valve fixes a GE, Hotpoint, or Kenmore washer that won't fill, fills intermittently, or fills slowly. It is a sealed on/off solenoid valve. Classic symptom: the cycle starts but little or no water comes in, and the supply taps and hoses are clear.
Common Problems This Part Fixes
Washer won't fill with water
Intermittent filling during the cycle
Slow or weak fill
Valve that leaks or doesn't shut off properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water valve directly replaces the following part number:
WH23X35712, 4984177, AGE26168, AP7211666, EAP17139268, PD00089992, PS17139268
No other GE part numbers were confirmed for this valve. Other GE washer valves with similar numbers, such as WH23X29553, are different parts. Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This valve is listed for GE, Hotpoint, and Kenmore washers.
GE-family washers sold as General Electric, Hotpoint, RCA, and Kenmore
Note: We could not confirm a model list for this valve, so compatibility is stated by brand only. GE makes several look-alike washer valves that differ in coil count and connections. Enter your model number at checkout or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE electromagnetic (solenoid) water valve
Sealed on/off valve that controls water flow into the washer
Resolves no-fill, intermittent-fill, and slow-fill problems
Listed for GE, Hotpoint, and Kenmore washers
Product Specifications
Part Number
WH23X35712
OEM Part Number
WH23X35712
Part Type
Washer Electromagnetic (Solenoid) Water Valve
Condition
Genuine OEM
Application
GE, Hotpoint & Kenmore Washers
Installation Notes
⚠️ Unplug Power and Shut Off the Water Unplug the washer and turn off the water supply before beginning. Wear work gloves, and have a towel and shallow pan ready for water left in the hoses. Follow your model's service guide to reach the valve, note the position of each wire connector and hose, and disconnect them. Handle the new valve by its body and avoid stressing the electrical connectors or the inlet and outlet fittings. Inspect the hoses and fittings, replace any worn seals, then reconnect everything and check for leaks with the water on.
Frequently Asked Questions
My washer won't fill. Is this the part I need?
A failed water valve is a common cause. First check that the water supply taps are fully open and that the inlet screens at the hose connections aren't clogged. If both are fine and the washer still fills slowly or not at all, the valve is a likely cause.
What does this valve do?
It is an on/off solenoid valve. It opens when energized to let water in and closes to stop the flow and prevent overfilling.
Can I use a different GE washer valve?
Not unless your model's parts diagram calls it out. GE makes several valves that look alike but differ in coil count and connections. Use the number your model calls out, or contact our support team to confirm.
Will this fit my washer?
It is listed for GE, Hotpoint, and Kenmore washers, but we could not confirm a model list. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WH01X24697 Washer Genuine OEM Drive Belt
The WH01X24697 is a genuine GE OEM drive belt for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This belt connects the drive motor to the drive system, transmitting rotation to spin the basket during the wash and spin cycles.
Measures approximately 21" long, made of durable, flexible rubber engineered to reduce slipping and squeaking while withstanding regular tension and wear. Over time, the belt stretches, cracks, or breaks from age and normal use. If your washing machine is making unusual noise, not spinning correctly, or the basket isn't moving, this drive belt may be the cause. It directly replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488. As a genuine OEM part, the WH01X24697 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WH01X24697 Washer Genuine OEM Drive Belt fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers with unusual noise, a basket that won't spin correctly, or a basket that isn't moving at all. Approximately 21" long. Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488. Not the same as the similarly-numbered WH01X24180 or WH01X27538 belts, which are separate parts used on other GE/Hotpoint models — confirm your exact part number before ordering.
Common Problems This Part Fixes
Basket not spinning or not moving at all
Unusual noise during operation, including squeaking
Basket slipping or spinning inconsistently
Wash cycle running without proper agitation or spin
Belt visibly stretched, cracked, or broken
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drive belt directly replaces the following OEM and cross-reference part numbers:
WH01X24697, 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive belt is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as GTW220ACK1WW, GTW220ACK2WW, GTW220ACK3WW, GTW330ASK0WW, GTW330ASK1WW, GTW330ASK2WW, GTW460AMJ1WW, GTW460AMJ3WW, GTW460AMJ4WW, GTW460ASJ1WW, GTW460ASJ3WW, GTW460ASJ4WW, GTW460ASJ5WW, GTW460ASJ6WW, GTW460ASJ7WW, HTW200ASK0WW, HTW200ASK1WW, HTW200ASK2WW, HTW240ASK0WS, HTW240ASK1WS, and HTW240ASK2WS.
Note — not the same as WH01X24180 or WH01X27538: These are separate GE/Hotpoint drive belts with their own cross-reference sets, used on different models. The similar numbering makes them easy to confuse. Always verify your exact part number before ordering. Contact our support team with your model number if you're unsure which belt your washer needs.
Key Features
Genuine GE OEM part — factory-specified length and construction
Connects the drive motor to the drive system to spin the basket
Resolves "won't spin," "unusual noise," and "basket not moving" symptoms caused by belt failure
Approximately 21" long
Durable, flexible rubber construction engineered to reduce slipping and squeaking
Direct drop-in replacement matching the original length and profile
Replaces 4585709, 290D1101P003, 5PJ576SJ83, AGE26179, AP6037512, EAP11767488, OEM18112545, PD00034405, PS11767488
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Straightforward DIY repair with basic tools
Product Specifications
Part Number
WH01X24697
Part Type
Washer Drive Belt
Condition
Genuine OEM
Length
Approx. 21"
Material
Rubber
Function
Connects the drive motor to the drive system to spin the basket
Repair Difficulty
Easy to Moderate
Quantity
1 drive belt
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel of the washer using a socket wrench set, taking out the securing screws and carefully lifting the panel away. Locate the drive belt near the motor, at the bottom of the washer. Use a screwdriver to loosen the tensioner, then gently slide the old belt off the pulleys. Fit the new WH01X24697 belt around the pulleys in the same path as the old one, then re-tension it with the tensioner. Reinstall the back panel and secure its screws. Restore power and run a test cycle to confirm the basket spins smoothly with no unusual noise. Tools needed: socket wrench set, screwdriver, work gloves.
Frequently Asked Questions
My washer's basket isn't spinning. Is this the belt I need?
Yes, this is one of the most common symptoms of a failed drive belt. Since this belt is what transmits rotation from the drive motor to the basket, a stretched, cracked, or broken belt can leave the motor running while the basket doesn't spin correctly or at all.
Is this a difficult repair?
No, it's a straightforward repair for a confident DIYer with basic tools. It involves removing the back panel to access the belt near the motor, loosening the tensioner, and swapping the belt — no specialized skills required.
Is this the same as WH01X24180 or WH01X27538?
No, these are separate GE/Hotpoint drive belts with their own distinct cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old belt rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original length, material, and pulley fit of the drive belt originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5220FR2008F Washer Water Valve
The XPARTCO 5220FR2008F is an aftermarket replacement water inlet and dispenser valve assembly for LG front-load washers, and also fits select Kenmore models. This valve connects to your home's water source and to the washer's solenoid wiring, controlling exactly how much water enters the tub and ensuring the correct fill level for each cycle. The assembly has 1 inlet and 4 outlets.
Rated 120V, 60Hz. Common failure causes include mineral or sediment buildup inside the valve body and general electrical wear in the solenoid coils. A failing valve produces a clear set of symptoms: the washer continuing to fill even after it should be full, filling slowly, overfilling, or leaking water into the drum when the washer is off. On some LG models, this can also trigger an FE error code specifically tied to the fill process. It directly replaces AP4445613, 1268512, 5221ER1002B, AH3527431, EA3527431, and PS3527431.
Quick Answer
The XPARTCO 5220FR2008F Washer Water Valve fixes LG and select Kenmore front-load washers that keep filling past full, fill slowly, overfill, or leak water into the drum when off — sometimes accompanied by an FE error code. 120V, 60Hz, 1 inlet, 4 outlets. Replaces AP4445613, 1268512, 5221ER1002B, AH3527431, EA3527431, PS3527431. Some LG steam washers use this valve alongside a separate hot water valve — if only one side is failing, you may only need to replace the specific valve at fault rather than the whole group.
Common Problems This Part Fixes
Washer continues filling with water even after it should be full
Washer filling slowly
Washer overfilling
Water leaking into the drum when the washer is turned off
FE error code displayed during the fill portion of the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
5220FR2008F, 5220FR2008L, 5221ER1002B, AH3527431, EA3527431, AP4445613, ALG51753, EAP3527431, PD00001808, PS3527431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select LG front-load washers, and also fits select Kenmore washers built on the LG platform, including model numbers such as WM2487HRMA, WM2487HWM, WM2487HWMA, WM2688HNM, WM2688HWMA, WM2455HW, WM2301HW, WM3997HWA, WM3070HRA, WM0532HW, WM2075CW, and WM3987HW.
Note: LG uses several visually similar water valves across its washer lineup, including 5220FR2006H and 5221ER1003S. Always confirm your exact part number — comparing your old valve's printed number and photo against the listing is the most reliable way to avoid ordering a similar-looking but incorrect valve. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement water inlet and dispenser valve assembly
Resolves "won't stop filling," "fills slowly," "overfills," "leaks when off," and "FE error code" symptoms
1 inlet, 4 outlets
Rated 120V, 60Hz
Sold individually
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP4445613, 1268512, 5221ER1002B, AH3527431, EA3527431, and PS3527431
Compatible with LG and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP5220FR2008F
OEM Part Number
5220FR2008F
Part Type
Washer Water Inlet & Dispenser Valve Assembly
Condition
Aftermarket Replacement
Application
Front-Load Washers
Voltage
120V
Frequency
60 Hz
Inlets / Outlets
1 inlet, 4 outlets
Weight
Approx. 0.60 lbs
Package Dimensions
5.12" x 4.69" x 3.98"
Repair Difficulty
Easy to Moderate
Quantity
1 valve (sold individually)
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access on most LG front-load washers requires removing the top cover to reach the water valve assembly and its electrical connections and hoses. On models with multiple valves (some LG steam washers use one separate hot water valve plus a group of cold water valves), identify specifically which valve is failing before removing anything — check your old valve's printed part number and compare it against a reference photo, since several LG valves look very similar. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and hose from the failing valve, remove its mounting screws, and pull it free. Install the new 5220FR2008F in the same position, reconnect the hose and electrical connector fully, and secure the mounting screws. Restore the water supply and power, then run a full test cycle to confirm correct fill behavior with no leaking or error codes. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
My washer shows an FE error code. Is this the valve I need?
Possibly. One customer reported an FE error appearing while the machine was still "filling," which pointed to one of the hot or cold water valves not working correctly. If your FE error consistently appears during the fill portion of the cycle, this valve is a reasonable place to start troubleshooting.
My washer has more than one water valve. Do I need to replace all of them?
Not necessarily. Some LG steam washers use a separate hot water valve plus a group of valves fed from the cold water main, and it's common for only one specific valve in that group to actually be bad. One customer confirmed this exact setup, testing and replacing only the single failing valve rather than the entire group, which resolved their issue.
How do I make sure I'm ordering the correct valve, since several look similar?
Check the part number printed directly on your old valve and compare it, along with a photo if available, against the listing before ordering. One customer specifically noted that several LG valves looked alike, and having a clear reference photo was what let them positively identify the correct replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured to match the solenoid design, inlet/outlet configuration, and electrical rating of the original 5220FR2008F valve used in compatible LG and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5221ER1003A Washer Water Inlet Valve
Three solenoids. Washer cold water inlet valve assembly.
120V AC
Washer cold water inlet valve assembly.
Replaces Part Numbers: 5221ER1003A, 1268130, 5221ER1003C, 5221ER1003D, 5221ER1003F, AH3527452, EA3527452, AP4442608, PS3527452. 5220FR2075L, 4322702, AGM73269503, AP5986564, PS11728995.
Description: This Water Inlet Valve Assembly is a replacement part for specific Kenmore, LG washing machine models. This critical component regulates the flow of water into the washing machine tub, ensuring the proper water supply for various wash cycles and functions.
This is an aftermarket part that can be used as a replacement for the OEM part.
8540101CM Washer Drive Belt
Washing machine inner tub drive belt
6 Rib, 51.33"
Description: The Drive Belt is a replacement for specific Whirlpool, Maytag, Kenmore washer models. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.
Replaces Part NumbersWP8540101, 8540101, 8540348, AP6013037, PS11746258
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
Genuine OEM WH01X27538 Washer Drive Belt
The Genuine OEM GE WH01X27538 is a washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is the original GE part. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The Genuine OEM WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, replaces 290D1101P005, 4587903, 5PJ 586 SJ 161, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
WH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Genuine OEM
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH03X32217 Washer Motor Pulley
The WH03X32217 is a genuine OEM 1/2 HP motor pulley and nut from GE for GE, Hotpoint, Kenmore, and RCA washers. The pulley mounts on the motor shaft and carries the drive belt that transfers the motor's power to the drum, and the nut secures it to the shaft. A pulley that cracks, wears, or strips its threads can slip on the shaft, squeal, or stop driving the belt, so the drum turns poorly or not at all.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and the shaft connection match the original. This pulley is for the 1/2 HP motor. Washers with the smaller 1/3 HP motor use a different pulley, so match the part before you order.
Quick Answer
The Genuine OEM WH03X32217 Motor Pulley and Nut fixes a GE-built washer whose 1/2 HP motor pulley is cracked, worn, or has stripped threads, causing a loud squeal, belt slipping, or a drum that won't turn. Genuine OEM from GE Appliances. Classic symptom: the motor runs but the drum turns weakly or not at all, often with a squealing or slipping noise.
Common Problems This Part Fixes
Loud squealing from the motor and belt area
Drum not turning, or turning weakly, while the motor runs
Cracked, worn, or damaged plastic pulley
Stripped pulley threads or a pulley loose on the motor shaft
Drive belt slipping or wearing quickly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This motor pulley and nut replaces the following part numbers:
WH03X32217 replaces WH49X25377, WH07X24182, AGE25958, AP7018598, PD00069997, PS16554753
These are GE's earlier numbers for the 1/2 HP motor pulley and nut. If your old pulley or parts diagram shows either, match against this list.
Compatibility
This motor pulley is listed for washers from:
GE
Hotpoint
Kenmore (GE-built)
RCA
Note: This pulley is for washers with a 1/2 HP motor. Washers with a 1/3 HP motor, such as those using WH03X32218 or WH07X24695, use a different pulley. No model list is published for this part, so confirm fit by matching the number on your old pulley or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM GE motor pulley and nut, not an aftermarket equivalent
For washers with a 1/2 HP motor
Mounts on the motor shaft to carry the drive belt to the drum
Restores a secure belt drive and eliminates pulley slipping and squeal
Simple replacement, typically 15–60 minutes with hand tools
Product Specifications
Part Number
WH03X32217
OEM Part Number
WH03X32217
Part Type
Washer Motor Pulley and Nut
Condition
Genuine OEM
Manufacturer
GE Appliances
Motor Size
1/2 HP
Application
Select GE, Hotpoint, Kenmore & RCA Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer and turn off the water supply before starting. Following your model's service guide, remove the panel needed to reach the motor and drive belt. Release the belt from the old pulley, then remove the nut holding the pulley to the motor shaft and take the pulley off. Fit the new pulley on the shaft, secure it with the nut, and refit the belt. Check that the belt sits correctly and is not worn, since a worn belt or transmission pulley can cause the same symptoms. Replace the panel, restore power and water, and run a short cycle to confirm the drum turns smoothly. Common tools are pliers, screwdrivers, and a socket set.
Frequently Asked Questions
My washer squeals and the drum won't turn. Is this the part I need?
It can be. A cracked or worn motor pulley can slip and squeal. Inspect the pulley for cracks, wear, or damaged threads, and check the belt and transmission pulley at the same time, since they can fail together.
Is this the right pulley for a 1/2 HP or a 1/3 HP motor?
This one is for the 1/2 HP motor. Washers with a 1/3 HP motor use a different pulley, so check your parts diagram or contact our support team with your model number.
Does it come with the nut?
GE lists this part as a motor pulley and nut. Contact us if you need to confirm what's in the package for your order.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10006355 Washer Shift Actuator
Fits specific Maytag, Kenmore, Whirlpool top-load machine models.
Replaces Part Numbers: WPW10006355, W10006355, AP6014711, PS11747977.
Description: This Shift Actuator is a replacement part for specific Maytag, Kenmore, Whirlpool washing machine models. It is an electronic component located inside the transmission that controls the shifting between wash cycles. The shift actuator receives signals from the washer control board to change modes, initiating proper movements to advance the cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO DC97-16350V Washer Suspension Rod Kit (Set of 4)
The XPARTCO DC97-16350V is an aftermarket replacement washer suspension rod kit (set of 4) compatible with select Samsung top-load washers in the WA48, WA50, WA52, and WA54 series. The suspension rods are spring-loaded shock-absorbing rods that connect the outer tub to the top of the washer cabinet, suspending the tub and dampening the vibrations generated during agitation and high-speed spin cycles. All four rods work together to keep the tub centered and stable — when one or more rods weaken, break, or lose their spring tension, the tub swings off-center and strikes the cabinet walls, causing violent shaking, banging, error code dc (out of balance), UE imbalance errors, and progressive damage to the washer cabinet and internal components.
Each rod is 27.5 inches in overall length and is constructed from spring steel with a plastic top cap and bottom cup that clip into the tub and cabinet mounting points. The kit includes all 4 suspension rods — always replace all four at the same time since the rods wear at the same rate. Installs in 20–30 minutes — no special tools required. Note: rods are coated with grease — wear gloves during installation.
Quick Answer
The XPARTCO DC97-16350V Washer Suspension Rod Kit fixes Samsung top-load washers that vibrate violently, bang loudly, walk across the floor, display dc or UE imbalance error codes, or stop mid-cycle during spin. Set of 4 rods, 27.5" overall length, spring steel. Replace all 4 at the same time. Wear gloves — rods are greased. Compatible with Samsung WA48, WA50, WA52, and WA54 series. Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611
Common Problems This Kit Fixes
Washer vibrating violently or shaking excessively during the spin cycle
Loud banging or thumping — tub striking the cabinet walls during spin
Washer "walking" or moving across the floor during high-speed spin
Error code dc displayed — Samsung out-of-balance error during spin
Error code UE displayed — unbalanced load error the washer cannot correct
Washer repeatedly stopping and rebalancing the load without completing the spin cycle
Visible broken, detached, or sagging suspension rod visible inside the cabinet
Rattling or clunking noise during agitation — tub no longer centered
Replaces Part Numbers
This suspension rod kit directly replaces the following OEM and cross-reference part numbers:
DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This suspension rod kit is compatible with select top-load washers from the following Samsung series:
Samsung WA48 series — WA48H7400AW, WA48H7400AP, WA48J7700AW, WA48J7770AP and related models
Samsung WA50 series — WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50R5200AW, WA50R5400AV, WA50T5300AC and related models
Samsung WA52 series — WA52A5500AV, WA52A5500AW, WA52A5500AC and related models
Samsung WA54 series — WA54R7200AV, WA54R7200AW, WA54R7600AC, WA54R7600AV, WA54R7600AW, WA5AR7200AV and related models
Samsung WA45 series — WA45H7000AW, WA45K7600AW, WA45M7050AW (select models)
Kenmore / Sears top-load washers (select Samsung-built models)
Important: Samsung uses several different suspension rod lengths across its top-load washer lineup. The DC97-16350V is 27.5 inches long and is for larger-capacity WA48–WA54 series models. Shorter-capacity models (WA40–WA45) typically use DC97-16350C or DC97-16350U rods. Always verify your model number before ordering to confirm you need the 27.5-inch version.
Key Features
Set of 4 suspension rods — complete replacement kit covering all four tub mounting points
Suspends and centers the outer tub within the cabinet — dampens agitation and spin vibration to prevent tub-to-cabinet contact
Resolves Samsung error codes dc (out of balance) and UE (unbalanced load)
27.5 inches overall length — correct size for WA48, WA50, WA52, and WA54 series Samsung top-load washers
Spring steel construction with plastic top cap and bottom cup — durable and corrosion resistant
Rods are pre-coated with grease — wear work gloves during installation
Replace all 4 rods at the same time — rods wear together and partial replacement leads to uneven tub support
No special tools required — installs in 20–30 minutes
Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611, and more
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DC97-16350V
Part Type
Washer Suspension Rod and Spring Assembly
Condition
Aftermarket Replacement
Application
Samsung Top-Load Washers — WA48, WA50, WA52, WA54 series
Quantity
Set of 4 (replace all four rods at the same time)
Rod Length
27.5 inches overall
Material
Spring steel / Plastic / Metal
Color
Black / Silver / Gray
Lubrication
Pre-coated with grease — wear gloves during installation
Error Codes Resolved
dc (out of balance), UE (unbalanced load)
Compatible Brands
Samsung, Kenmore (Samsung-built)
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves throughout — the suspension rods are coated with grease. Remove the lid of the washer and the top panel (typically secured by screws under the lid hinge covers and at the rear corners). With the top panel removed, the four suspension rods are visible, each running from a mounting point on the tub rim up to a hook or bracket at the top corners of the cabinet frame. Note the orientation and attachment method of each rod before removing. Unhook the top of the old rod from the cabinet bracket and lift the bottom cup off the tub mounting pin. Install each new DC97-16350V rod by seating the bottom cup onto the tub mounting pin and hooking the top over the cabinet bracket. Replace all four rods before reassembling. Reinstall the top panel and lid, restore power and water, then run a spin cycle to verify smooth, stable operation. Tools needed: Phillips screwdriver; no special tools required for the rods themselves.
Frequently Asked Questions
What do the suspension rods do?
The suspension rods are spring-loaded shock absorbers that hang the outer washer tub from the top corners of the cabinet frame. They suspend the tub in the center of the cabinet and absorb the vibrations and movement generated during agitation and high-speed spin cycles. As long as all four rods have equal spring tension, the tub stays centered and stable. When one or more rods lose tension, stretch, or break, the tub is no longer held evenly and begins to swing off-center during spin — striking the cabinet walls, causing the loud banging, vibration, and imbalance error codes that indicate the rods need replacement.
Why must I replace all 4 rods instead of just the broken one?
All four suspension rods experience the same amount of wear over the same number of wash cycles. When one rod fails, the remaining three have experienced the same stress and fatigue and are likely to fail soon after. Replacing only the broken rod leaves three worn rods supporting the tub unevenly, which can cause the new rod to wear faster and may not fully resolve the vibration problem. Replacing all four at the same time ensures even tub support, fully resolves the imbalance, and prevents a repeat repair in the near future.
What do error codes dc and UE mean on Samsung washers?
On Samsung top-load washers, error code dc (or sometimes dC) means the washer has detected an out-of-balance condition during the spin cycle and has stopped to prevent damage. Error code UE means an unbalanced load that the machine cannot automatically correct by redistributing. Both codes can be caused by an actual overloaded or unevenly distributed laundry load — but if the errors occur frequently even with normal loads and proper load distribution, worn or broken suspension rods are the most common mechanical cause. Replacing the rod kit resolves these errors in most cases.
How is the DC97-16350V different from DC97-16350U or DC97-16350S?
The DC97-16350V, DC97-16350U, and DC97-16350S are all Samsung suspension rods, but they have different lengths for different washer model generations and capacities. The DC97-16350V is 27.5 inches long and is used on larger-capacity WA48–WA54 series Samsung washers. The DC97-16350U is approximately 26.4 inches and is used on mid-capacity WA45–WA50 series models. The DC97-16350S and DC97-16350C are shorter versions for earlier or smaller-capacity models. Using the wrong length rod can cause the tub to sit at the incorrect height inside the cabinet. Always verify your model number before ordering to confirm the correct rod length.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from spring steel with plastic end caps to match the length and spring tension of the original DC97-16350V suspension rods.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11168740 Washer Water Valve (Cold Side)
The XPARTCO W11168740 is an aftermarket replacement cold water inlet valve for Whirlpool-built top-load washers, located on the top back of the cabinet where the hot and cold supply hoses connect. Unlike its companion hot-side valve (sold separately as W11168743, a single-solenoid design), this cold valve uses two internal solenoid coils in one blue-bodied housing. When the control calls for a cold fill, it energizes the appropriate solenoid to open the water path; once the correct level is reached, it closes again.
Because it's a dedicated cold-only valve, a failure here produces a distinctive symptom: cold-only fills stop working, slow down dramatically, or don't stop when they should, while hot fills (governed by the separate hot valve) continue working independently. Rated 120V, 60Hz, with push-on outlet connections sealed by rubber grommets. Common failure causes include mineral or sediment buildup that prevents the valve from sealing, a burned-out solenoid coil, or a worn seal at the outlet connection. It directly replaces WPW10240949, W10240949, W10921514, 33390069, 4546379, AP6285450, PD00038781, and PS12348073.
Quick Answer
The XPARTCO W11168740 Washer Water Valve (Cold Side) fixes Whirlpool-built top-load washers where cold water won't fill, fills slowly, keeps filling and won't stop, leaks, or throws a fill-related error code — while hot water fills normally. Blue-bodied, 2-solenoid cold-only valve, 120V, 60Hz, push-on outlet with rubber grommets. Replaces WPW10240949, W10240949, W10921514, 33390069, 4546379, AP6285450, PD00038781, PS12348073. This is the cold-side valve only — the companion hot-side valve is sold separately as W11168743.
Common Problems This Part Fixes
Washer won't fill with cold water while hot water fills normally
Cold water fills much more slowly than it used to
Washer keeps filling with cold water and won't stop, leading to overfill
Water leaking at the cold connection point
Fill-related error code displayed on the control panel
Cycle stalling at the fill step and never advancing to wash
Cold wash or cold rinse cycles specifically affected while other cycles run fine
Water pooling underneath or behind the washer near the cold supply connection
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11168740, WPW10240949, W10240949, W10921514, 33390069, 4546379, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cold water inlet valve is compatible with select Whirlpool-built top-load washers across the Whirlpool family of brands, including:
Whirlpool top-load washers — WTW series
Maytag top-load washers (select Whirlpool-built models)
Select Kenmore top-load washers built on the Whirlpool platform
Verified model numbers include: WTW5500XL0, WTW5500XL2, and WTW5640XW3.
Note — cold side only: This is the cold water valve, identifiable by its blue body and two internal solenoids. The matching hot water valve for these same washers is sold separately under part number W11168743 — a single-solenoid design. The two are not interchangeable. If both valves need replacement, order both part numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement dedicated cold water inlet valve for Whirlpool-built top-load washers
Two internal solenoid coils in one blue-bodied housing, identifiable at a glance from the single-solenoid hot valve
Resolves "won't fill with cold water," "fills slowly," "won't stop filling," and "leaking at the connection" symptoms caused by valve failure
Rated 120V, 60Hz
Push-on outlet connections sealed with rubber grommets
Approximately 3-3/8"L x 3-1/2"W x 2-3/8"H
Direct drop-in replacement — no modification required
Replaces WPW10240949, W10240949, W10921514, 33390069, 4546379, AP6285450, PD00038781, and PS12348073
Compatible with a wide range of Whirlpool, Maytag, and Kenmore top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPW11168740
OEM Part Number
W11168740
Part Type
Washer Water Inlet Valve — Cold Side
Condition
Aftermarket Replacement
Application
Top-Load Washers (Whirlpool-Built)
Voltage
120V
Frequency
60 Hz
Solenoids
2 (dedicated cold water function)
Color
Blue / Teal / Black
Material
Plastic and metal
Outlet Connection
Push-on with rubber grommets
Dimensions
Approx. 3-3/8"L x 3-1/2"W x 2-3/8"H
Companion Part
W11168743 (hot water valve, sold separately)
Quantity
1 valve
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Have A Towel Ready Unplug the washer or shut off its circuit breaker, and shut off both the hot and cold water supply valves before beginning. Wear work gloves. Disconnect the cold water supply hose from the back of the valve first — have a towel or shallow pan ready, since residual water will spill out. Remove the screws securing the top panel (a 1/4" nut driver or socket handles most models), then slide the panel back and lift it off to access the valve assembly from inside the cabinet. Photograph the wiring connections before disconnecting anything, since the hot and cold valves sit next to each other and it's easy to cross a wire. Disconnect the electrical connector(s) from the old cold valve, disconnect the push-on outlet hose (check the rubber grommet for wear and replace it if it looks flattened or cracked), remove the two mounting screws holding the valve, and pull it free — leave the hot valve (W11168743) undisturbed if it isn't also being replaced. Install the new W11168740 in the same position, secure the mounting screws, reconnect the electrical connector(s), and press the outlet hose back onto its fitting with the grommet properly seated. Reattach the cold water supply hose, tightening securely by hand plus a partial turn with pliers. Reinstall the top panel, restore the water supply, and check every connection you touched for leaks before restoring power. Run a short cycle and confirm cold water fills at the normal rate, and stops when it should, with no leaking underneath or behind the washer. Tools needed: 1/4" nut driver or socket, Phillips screwdriver, pliers, towel or shallow pan, work gloves.
Frequently Asked Questions
Cold water won't fill but hot water works fine. Is this the right part?
Yes — that's exactly the symptom pattern this valve addresses. Since your washer uses separate hot and cold valves rather than one combined valve, a fault on the cold side only affects cold fills while the hot valve keeps working independently. If cold-specific cycles are the ones failing while hot cycles are unaffected, this cold-side valve is the correct part to replace.
How can I tell this valve apart from the hot-side valve just by looking at it?
This cold valve has a blue body and two internal solenoid coils, while the companion hot-side valve (W11168743) is a single-solenoid design. If you're staring at the old valve trying to confirm which one you're removing, the color and solenoid count are a quick visual check.
Do I need to replace both the hot and cold valves at the same time?
Not necessarily. Since these are independent single-function valves, you only need to replace the one that has actually failed. If only cold fills are affected, replacing this W11168740 valve alone is sufficient. Some people choose to replace both while the top panel is already off, especially on an older washer, but it isn't required.
My washer keeps filling with cold water and won't stop. Is that dangerous?
It can lead to overflow and water damage if left unaddressed, so it's worth shutting off the water supply at the wall if this happens rather than waiting. A valve that won't stop filling usually means a worn internal seal is no longer sealing shut when the solenoid de-energizes, letting water continue flowing. This valve is the correct replacement for that symptom.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dual-solenoid design, connection type, and dimensions of the original W11168740 cold water valve used in compatible Whirlpool, Maytag, and Kenmore top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH16X26913 Washer Genuine OEM Suspension Rod and Spring
Rod and spring asm right- black
Description: The Rod and Spring Asm Right-Black is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles.
Replaces Parts Numbers: WH16X26913, WH16X26714, AP6331892, PS12343383.
California Residents only
WARNING: California’s Proposition 65
