134371220CM Washer Water Valve
Replaces Part Numbers: 134371220, WH13X10030, 1154728, AH1145692, EA1145692, OEM11533292, AP3844429, PS1145692.
Description: This Water Inlet Valve is a replacement part for specific Frigidaire washing machine models. This part controls the flow of hot and cold water into the washer's tub, ensuring the correct temperature mix for various wash cycles. By opening and closing at the command of the washer's control system, it plays a pivotal role in the machine's ability to execute programmed wash cycles with precision, affecting everything from the initial fill to the rinse phases. Causes for the replacement of the water inlet valve can range from mineral deposits and sediment build-up, which can obstruct the valve's flow, to mechanical wear and electrical failures affecting the valve's operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
ERP WH01X10727 Washer Shock Absorber
Replaces Part Numbers: WH01X10727, 3029711, AP5793647, PS8756975.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
5220FR2006H Washer Hot Water Inlet Valve - Compatible with LG, Kenmore
Product Description
Ensure proper water flow with the replacement 5220FR2006H Washer Hot Water Inlet Valve. This replacement water inlet valve is designed for select LG and Kenmore front-load and top-load washers, featuring one solenoid to control hot water entry into the drum. It addresses issues like no water flow, leaks, improper filling, or error codes, offering a cost-effective alternative to OEM parts.
Note: Includes one water inlet valve with one solenoid. Disconnect power and water supply before installation. Check water supply lines and valve filters for blockages to ensure optimal performance.
Replaces part numbers: 5220FR2006H, 1268123, 5220FR1280F, 5220FR2006L, 5220FR2006Q, AH3527427, EA3527427, PD00001765, EAP3527427, AP4441935, PS3527427.
Compatibility:
Compatible with models including but not limited to:
LG: WM2016CW, WM2077CW, WM2277HW, WM2455HW, WM2487HRM, WM2601HW, WM2701HV, WM2801HWA, WM3070HWA, WM3470HWA, WM8000HVA, WM9000HVA
Kenmore: 796.40272800, 796.41022900, 796.41028900
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore front-load and top-load washers.
💧 Specifications: replacement water inlet valve with one solenoid, 120V, 60Hz.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 20–30 minutes.
🛡️ Effective Fixes: Resolves no water flow, leaks, improper filling, or error codes.
Product Specification
Part Number: 5220FR2006H
Component Type: Washer hot water inlet valve
Material: High-grade plastic and metal
Electrical Specs: 120V, 60Hz, one solenoid.
Mounting: Screw-mounted near washer water inlet
Operating Conditions: Suitable for high-pressure water supply environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running smoothly today!
Add to cart now for a budget-friendly fix!
EXPW79SC (8 Pack) Washing Machine Fill Hose Gasket with Screen
8 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
WD12X24058 Dishwasher Genuine OEM Detergent Dispenser
Detergent Dispenser
Fits select LG Dishwasher models.
Replaces Part Numbers: AGM75469801, AP6234070, PS12078829.
Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.
WH08X10024CM Washer Drive Belt
1300J7 Poly-V auto tension belt. 7 Rib.
Fits GE front load washers.
Replaces Part numbers:WH08X10024, 1168664, AH1020114, AP3884128, EA1020114, PS1020114.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W10240513 Washer Lid Lock Strike – Replaces WPW10240513 – Compatible with Whirlpool, Maytag & Kenmore Washers
Product Description
Restore proper lid locking function with the W10240513 Washer Lid Lock Strike. This replacement part attaches to the washer lid and engages with the lid lock assembly to ensure the washer detects when the lid is closed and can safely begin operation.
A damaged or broken lid strike can prevent the washer from starting, cause lid lock errors, or stop the spin cycle. Replacing it with this durable replacement part restores proper lid engagement and ensures smooth washer operation.
This part is designed to match original fit and function for reliable performance.
Replaces Part Numbers
WPW10240513, W10240513, AWP50167, PD00004624, 1873013, 045900191755, EAP11750882, AP6017583, PS11750882.
Compatibility
This replacement washer lid lock strike fits select Whirlpool, Maytag, Kenmore (Whirlpool-manufactured), Amana, and Roper washers.
Common compatible models include (but are not limited to):
Whirlpool WTW5000DW
Maytag MVWC565FW
Kenmore 110.22352510
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Direct Replacement Part – Matches OEM fit and function
🔒 Ensures Proper Lid Lock Engagement – Works with lid lock assembly
⚙️ Fixes Common Issues – Resolves lid lock errors and start failures
🧩 Simple Installation – Attaches easily to washer lid
💰 Cost-Effective Repair – Affordable solution for lid lock problems
⚠️ Symptoms
If your washer is experiencing any of the following issues, this part may need replacement:
❌ Washer will not start
🔒 Lid not locking properly
⚠️ Lid lock error codes
🔄 Cycle won’t begin or stops mid-cycle
🛑 Washer won’t spin
Replacing this lid strike can restore proper lid locking and washer operation.
📐 Product Specification
Part Number: W10240513
Component Type: Washer Lid Lock Strike
Material: Durable molded plastic
Application: Lid lock engagement system
Mounting: Snap-in or screw-mounted (model dependent)
Quality Level: Aftermarket replacement
🛠️ Installation Notes
Tools Needed: Screwdriver (if required)
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Locate the lid strike on the washer lid.
Remove the damaged strike.
Install the new W10240513 strike in place.
Ensure proper alignment with the lid lock assembly.
Restore power and test operation.
⏱️ Time Required: Under 10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Replacement Parts
🔄 30-Day Return Policy
Restore proper lid locking and washer performance — Add to Cart Now for a quick and easy fix!
DD62-00084A Dishwasher Genuine OEM Water Valve
Description: This Water Valve is a Genuine OEM part compatible with specific Samsung dishwasher models. It is responsible for opening and closing the water supply to the dishwasher. It regulates the water pressure and ensures the proper amount of water is dispensed for each cycle. Causes of a faulty water valve can include wear and tear over time, sediment or debris buildup, electrical component failure, or damage due to high water pressure. These factors can result in issues such as inadequate water flow, leaks, or the dishwasher not filling or draining properly.
Replaces Part Numbers: DD62-00084A, AP5178218, PS4222448
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC66-00777A Washer Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer operating smoothly with the XPARTCO DC66-00777A Washer Pulsator Cap. This high-quality aftermarket replacement covers the central pulsator bolt, preventing water, detergent, and debris from entering the washer hub. A cracked or missing cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this durable XPARTCO cap restores a secure seal and helps maintain optimal washing performance.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This replacement pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, and WA45H7000AW/A2.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and performance for Samsung washers
💧 Protective Seal – Keeps water and detergent away from the pulsator bolt area
💰 Cost-Effective Solution – Durable and affordable alternative to OEM caps
🛠️ Simple Installation – No tools required; snaps directly into place
🛡️ Fixes Common Issues – Replaces missing or damaged caps to prevent rust and noise
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-strength molded plastic
Color: Gray or silver finish (varies by batch)
Mounting: Snap-fit installation on top of pulsator bolt
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to avoid electrical shock.
Steps:
Open the washer lid and locate the center of the pulsator (washplate).
Remove any remaining parts of the old or damaged cap.
Align the new XPARTCO DC66-00777A cap with the pulsator hub opening.
Press firmly until it clicks into place.
Verify the cap is secure before running a wash cycle.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your washer from wear and debris — Add to Cart Now for a quick, reliable fix!
XPARTCO 349241T Dryer Drum Roller Set (2-Pack)
The XPARTCO 349241T is an aftermarket replacement dryer rear drum support roller set compatible with a wide range of Whirlpool-family 29-inch dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, and Magic Chef. The drum support rollers are cylindrical rubber-and-metal wheels mounted on shafts at the rear of the dryer cabinet that cradle and support the outer edge of the drum as it rotates. Without the rollers, the drum would drag directly on the cabinet, causing rapid wear and generating the loud thumping or squealing noise that indicates failing rollers.
This set includes 2 drum rollers, 4 tri-ring retaining clips, and 2 retaining washers — everything needed for a complete rear roller replacement. Each roller measures 3-1/4"L x 1"W x 3-1/4"H and is constructed from rubber over a metal bearing hub with a plastic axle support. Both rollers must always be replaced at the same time. The set directly replaces 349241, 349241TVP, 8170, 8205, 337089, 340352, 661562, 3389901, 3397588, 3397590, AP3098345, PS347627, and several additional cross-reference numbers. Often replaced together with the drum belt (341241) and idler pulley (691366 or 279640) for a complete drum drive repair. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 349241T Dryer Drum Roller Set fixes Whirlpool-family 29" dryers that are squealing, thumping, rumbling, or where the drum is not turning smoothly. Set of 2 rollers with 4 tri-rings and 2 retaining washers. 3-1/4"L x 1"W x 3-1/4"H each. Replace both rollers at the same time. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, and Magic Chef 29" dryers. Replaces 349241, 8170, 8205, 337089, 3389901, AP3098345, PS347627.
Common Problems This Part Fixes
Loud thumping, rumbling, or squealing noise during the drying cycle
Grinding or scraping sound when the drum is turning
Drum turning unevenly or wobbling during operation
Drum not spinning — rollers so worn they can no longer support the drum
Squealing or squeaking that gets worse over time as roller bearings degrade
Marks or scuff lines on clothes — drum dragging against the dryer cabinet
Excessive vibration during the drying cycle
Replaces Part Numbers
This drum roller set directly replaces the following OEM and cross-reference part numbers:
349241T, 26000349241, 337089, 3389901, 3397588, 3397590, 340352, 3436, 349241, 349241TVP, 661562, 8170, 8205, 99989678, 99989679, AWP39168, AH347627, EA347627, K34-895, PD00002257, EAP347627, AP3098345, PS347627.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller set is compatible with select 29-inch gas and electric dryers from the following brands:
Whirlpool dryers (gas and electric — 29" models)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers
KitchenAid dryers
Amana dryers
Roper dryers
Crosley dryers
Estate dryers
Inglis dryers
Admiral dryers
Magic Chef dryers
Note: The 349241T rollers are for 29-inch Whirlpool-family dryers. Newer Whirlpool Duet front-load dryers and larger-capacity models use different roller part numbers (such as WPW10314173 / 8536974). Always verify your model number before ordering.
Key Features
Set of 2 rear drum support rollers — supports and cradles the drum as it rotates for smooth, quiet operation
Includes all hardware: 2 rollers, 4 tri-ring retaining clips, 2 retaining washers — everything needed for a complete installation
Dimensions: 3-1/4"L x 1"W x 3-1/4"H per roller
Rubber wheel over metal bearing hub with plastic axle support — designed to resist wear and heat under continuous drum load
Both rollers must be replaced at the same time — replacing only one results in uneven drum support and accelerated wear on the new roller
Often replaced together with the drum belt (341241) and idler pulley (691366 or 279640) for a complete drum drive repair
Compatible with 11 major appliance brands on the Whirlpool 29-inch platform
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
349241T
Part Type
Dryer Rear Drum Support Roller Set
Condition
Aftermarket Replacement
Application
29-inch Gas and Electric Dryers
Quantity
Set of 2 rollers (replace both at the same time)
Roller Dimensions
3-1/4"L x 1"W x 3-1/4"H (per roller)
Material
Rubber wheel / Metal bearing hub / Plastic axle support
Color
Black / White
Kit Includes
2 drum rollers, 4 tri-ring retaining clips, 2 retaining washers
Often Replaced With
341241 Drum Belt, 691366 or 279640 Idler Pulley
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the screws inside the lint screen housing. Use a putty knife to release the top panel spring clips and lift the top panel. Remove the front panel to access the drum. Release the drive belt from the idler pulley, lift the drum forward, and set it aside. The rear drum support rollers are mounted on shafts on the rear bulkhead — each roller is secured with a tri-ring clip and a retaining washer. Use needle-nose pliers to remove the old tri-ring clips, then slide the old rollers off the shafts. Install the new rollers, new retaining washers, and new tri-ring clips on the shafts. Reinstall the drum, re-route the belt around the motor and idler pulley, and reassemble the front and top panels. Restore power and run a test cycle to verify quiet, smooth drum operation. Tip: while the dryer is open, inspect and replace the drum belt (341241) and idler pulley (691366 or 279640) if worn. Tools needed: Phillips screwdriver, 1/4" or 5/16" nut driver, putty knife, needle-nose pliers.
Frequently Asked Questions
What do the drum support rollers do?
The rear drum support rollers are cylindrical wheels mounted on fixed shafts at the back of the dryer cabinet. As the drum rotates, its rear outer rim rests on these rollers, which carry the drum's weight and allow it to spin smoothly and quietly. When the rubber wheels wear down or the bearing hubs corrode, the drum no longer rides smoothly on the rollers — causing thumping, rumbling, or squealing noises that get progressively worse. In severe cases, worn rollers allow the drum to sag and drag against the cabinet rear panel.
Why must I replace both rollers at the same time?
Both rear drum support rollers carry the same load and experience the same wear through every drying cycle. When one roller fails, the other has been under the same stress for the same number of cycles and is almost certainly near the end of its useful life. Replacing only the failed roller leaves one worn roller supporting the drum unevenly, which puts extra stress on the new roller and causes it to wear out much faster. Replace both rollers at the same time to ensure even drum support and get the full service life from the new parts.
Should I also replace the belt and idler pulley at the same time?
Yes — this is the ideal time. Since the dryer must be fully disassembled to access the rear drum rollers, replacing the drum belt (341241) and idler pulley (691366 or 279640) at the same time is strongly recommended. All three parts wear at similar rates, and a worn belt or idler pulley is often what caused the rollers to wear prematurely. Doing all three in one repair eliminates the most common drum drive failure points and saves you from repeating the teardown in the near future. The 4392065 maintenance kit includes all three parts together.
What causes dryer drum rollers to wear out?
Drum rollers wear naturally over time from the continuous load of supporting the rotating drum. The most common accelerating factors are operating the dryer with a worn or broken belt (which allows the drum to sag and puts extra weight on the rollers), running very large or heavy loads frequently, and allowing lint to accumulate around the roller shafts, which causes the bearings to run dry and wear faster. Regular dryer maintenance — including cleaning lint from around the drum and periodically checking the belt — helps extend roller life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement set built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, metal, and plastic to match the dimensions and load-bearing performance of the original 349241T drum roller set.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO MDS47123602 Washer Door Boot Gasket – Compatible with LG Front-Load Washers
Product Description
Stop leaks and restore proper sealing with the XPARTCO MDS47123602 Washer Door Boot Gasket. This high-quality aftermarket replacement forms a watertight seal between the washer door and tub, preventing water from leaking during wash and spin cycles. A worn, torn, or mold-damaged gasket can lead to leaks, odors, or excessive vibration. Replacing it with this durable XPARTCO gasket provides long-lasting protection and reliable washer performance.
Replaces Part Numbers
MDS47123602, MDS64237201, MDS64237202, MDS47123612, EAP3535210, PD00028934, AH3535210, EA3535210, AP5218575, PS3535210.
Compatibility
This replacement door boot gasket fits select LG front-load washers.
Example compatible models include (but are not limited to):LG WM2650HWA, WM3470HVA, WM3570HWA, WM8000HVA, and WM3997HWA.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and sealing performance
💧 Leak-Proof Design – Forms a tight seal to prevent water escaping from the washer door
🌿 Mold-Resistant Material – High-grade rubber reduces mildew and odor buildup
🛠️ Durable Construction – Built to withstand heat, detergent, and high-spin vibration
🛡️ Fixes Common Issues – Solves leaks, mold/mildew odor, door seal tears, or water pooling
📐 Product Specification
Part Number: MDS47123602
Component Type: Washer Door Boot Gasket (Door Seal)
Material: High-strength, mold-resistant rubber
Color: Gray (standard for LG models)
Mounting: Installed between front tub and door frame using clamps
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, spring clamp tool (recommended), pliers
⚠️ Safety First: Always unplug the washer before installation to prevent electrical shock.
Steps:
Remove the washer top and front panel for access.
Release the outer retaining spring clamp and remove the old gasket edge.
Detach the inner clamp from the tub and remove the old gasket completely.
Align and install the new XPARTCO MDS47123602 gasket around the tub opening.
Reinstall inner clamp, then secure the outer clamp around the door frame.
Reassemble the washer and perform a quick rinse cycle to test for leaks.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop washer leaks the right way — Add to Cart Now for a durable, budget-friendly replacement!
