DC62-30314L Dishwasher Genuine OEM Water Valve
120V, 60Hz, single coil valve with GHT inlet.
Fits Specific Samsung Dishwashers Models.
Replaces Part Numbers: DC62-30314L, AP5582579, PS4209101.
Description: The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance.
W11305308 Dishwasher Genuine Whirlpool Control Board
Control Board
Main electronic control board.
Fits Specific Whirlpool Dishwasher Models.
Replaces Part Numbers:W11305308, W11131683, W10918994, W11170192, W11227807, AP6832578, PS12704681.
DC61-02432A Genuine OEM Samsung Washer Suspension Spring Guide
The DC61-02432A is a genuine Samsung OEM suspension spring guide (bracket) for Samsung and select Kenmore washers. This small but structurally important bracket connects the washer's outer frame to one of the suspension springs that support the wash tub, keeping the spring correctly seated and aligned as the tub moves during fill, wash, and especially spin. The tub itself hangs suspended inside the cabinet, and it's this network of springs and guides that lets it move and absorb vibration without banging against the surrounding frame or panels.
Because this guide holds the spring in its proper working position, a cracked, worn, or broken guide lets the spring drift out of alignment or lose tension where it seats. The result is usually excessive tub movement, unusual banging or knocking noises (especially during spin), or a washer that seems to "walk" or vibrate more than it used to. Left unaddressed, a spring that has come loose from a failed guide can allow the tub to strike the cabinet repeatedly, accelerating wear on nearby components. It directly replaces AP5581510, 2069491, and PS4206750. As a genuine OEM part, the DC61-02432A is manufactured by Samsung to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The DC61-02432A Genuine OEM Samsung Washer Suspension Spring Guide fixes Samsung and select Kenmore washers with excessive tub movement, unusual banging or knocking noise (especially during spin), a washer that vibrates or "walks" more than it used to, or a suspension spring that has come loose or shifted out of position. Connects the washer frame to the suspension spring. Replaces AP5581510, 2069491, PS4206750. This bracket doesn't replace or include the spring itself — if the spring is stretched, rusted, or broken, it should be replaced separately alongside this guide.
Common Problems This Part Fixes
Excessive tub movement or vibration, especially noticeable during spin
Unusual banging, knocking, or thudding noise from inside the cabinet
Washer that vibrates more than it used to, or seems to "walk" across the floor during spin
Suspension spring that has come loose, shifted, or disconnected from its mounting point
Tub striking the cabinet frame or nearby panels during operation
Visible cracking or breakage on the guide/bracket where the spring attaches
Noise that has gradually worsened over time as the guide wears
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer suspension spring guide directly replaces the following OEM and cross-reference part numbers:
DC61-02432A, AP5581510, 2069491, ASM33826, PD00026723, PS4206750
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This suspension spring guide is compatible with select Samsung washers, and also fits select Kenmore washers built on the Samsung platform, including model numbers such as:
Samsung 402-49032012
Samsung 592-49006, 592-49032, 592-49042, 592-49045, 592-49052, 592-49075
Kenmore 40249032012
Note: This is the spring guide/bracket only — it does not include the suspension spring itself. If your spring is stretched, rusted, corroded, or broken, order the correct spring separately in addition to this guide. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Samsung OEM part — factory-specified bracket geometry and mounting fit
Connects the washer's outer frame to the suspension spring, keeping it correctly seated and aligned
Resolves "excessive tub movement," "banging or knocking noise," "washer vibrating or walking," and "loose spring" symptoms caused by guide failure
Direct drop-in replacement — mounts to the original frame attachment point
Simple, tool-light installation
Replaces AP5581510, 2069491, and PS4206750
Compatible with a range of Samsung and select Kenmore washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
DC61-02432A
Part Type
Washer Suspension Spring Guide / Bracket
Condition
Genuine OEM
Brand
Samsung
Function
Connects and aligns the washer frame to the suspension spring
Includes Spring
No — bracket/guide only, spring sold separately
Quantity
1 spring guide
Compatible Brands
Samsung, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Depending on your washer's design, you may need to remove the cabinet or rear access panel to reach the suspension spring and its guide bracket at the top of the tub assembly. Photograph how the old guide and spring are connected to the frame before removing anything, since suspension components are often symmetrical and easy to reverse or mismatch between mounting points. Carefully release the tension on the affected spring — depending on the model, this may involve unhooking the spring from the frame or the tub side first, then removing the old guide from its mounting point on the frame. Install the new DC61-02432A guide in the same position, then reattach the spring, making sure it seats fully and squarely in the new guide. Check any other springs and guides in the suspension system while you're in there, since if one has failed from age or wear, the others are often not far behind. Reassemble any panels you removed, restore power, and run a spin cycle to confirm the excessive movement, vibration, or banging noise has resolved. Tools needed: screwdriver (model-dependent access), pliers (helpful for spring tension), work gloves.
Frequently Asked Questions
My washer bangs loudly during spin. Is this the part I need?
It's a strong possibility, especially if the banging has developed gradually or seems to come from inside the cabinet near the tub. This guide keeps the suspension spring seated and aligned; when it cracks or wears out, the spring can shift out of position, letting the tub move more than it should and strike nearby components. Before ordering, it's worth opening up the access panel if you're comfortable doing so, to visually confirm whether a spring has come loose or a guide bracket looks cracked or broken.
Does this part include the suspension spring?
No — this is the guide/bracket only, which connects the frame to the spring. If your suspension spring itself is stretched, rusted, corroded, or snapped, you'll need to order the correct spring for your model separately in addition to this guide.
Should I replace just one guide, or check the others too?
It's worth inspecting the other suspension springs and guides while you have access, since they're typically all the same age and subject to the same wear. If one has failed, the others may not be far behind, and replacing them together can save you from repeating this repair again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Samsung to factory specifications — guaranteed fit, materials, and performance. It matches the original bracket geometry and mounting fit of the suspension spring guide originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4581EL2002C Dryer Drum Roller Assembly
The XPARTCO 4581EL2002C is an aftermarket replacement dryer drum support roller assembly compatible with select LG and Kenmore electric and gas dryers. The drum support rollers are cylindrical rubber-and-metal wheels mounted on fixed shafts inside the dryer cabinet that cradle and support the outer rim of the drum as it rotates. LG dryers use four support rollers — two at the front and two at the rear of the drum. When the roller wheels wear down, crack, or the axle bushings degrade, the drum no longer rides smoothly and begins to wobble, causing loud thumping, rumbling, or squealing noises, or preventing the drum from turning at all.
This roller assembly includes one roller with center bushing design, one shaft (with threaded end on one side and hex end on the other), and two tri-ring retaining clips. Sold individually — LG dryers use four rollers total, and all four should be replaced at the same time. Dimensions: 3"L x 2-3/8"W x 3"H. The 4581EL2002C is the current revision covering the earlier A, B, D, and E variants. It directly replaces 4581EL2002A, 4581EL2002B, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001E, 4581EL3001F, DE2002A, 2701044, AP5688895, EAP8260240, and PS8260240. Often replaced together with the drum belt (4400EL2001A) and idler pulley (4561EL3002A). Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 4581EL2002C Dryer Drum Roller fixes LG and Kenmore dryers that are thumping, rumbling, squealing, or where the drum has stopped turning. Sold individually — order 4 to replace all rollers at the same time. Includes roller, shaft, and 2 tri-ring clips. 3"L x 2-3/8"W x 3"H. Replaces 4581EL2002A, 4581EL2002B, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001F, DE2002A, 2701044, AP5688895, PS8260240. Often replaced with drum belt (4400EL2001A) and idler pulley (4561EL3002A).
Common Problems This Part Fixes
Loud thumping or rumbling noise during the drying cycle — worn drum roller wheels
Squealing or squeaking noise — roller bushing or axle degrading
Drum turning unevenly or wobbling — rollers no longer supporting the drum evenly
Drum not spinning at all — rollers so worn the drum has dropped off the support path
Scraping or grinding noise — roller wheel surface worn flat and dragging against the drum rim
Excessive vibration during the drying cycle
Marks or scuff lines on clothes — drum dragging against the cabinet from unsupported movement
Replaces Part Numbers
This drum roller directly replaces the following OEM and cross-reference part numbers:
4581EL2002L, AGM75510755, 4581EL2002H, 4581EL2002C, 4581EL2002A, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001F, AP7220429, PS17269866
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select LG and Kenmore gas and electric dryers:
LG electric dryers — DLE series (DLE0332W, DLE0442W, DLE1310W, DLE2512W, DLE2514W, DLE2515S, DLE2516W, DLE2532W, DLE3733W, DLE4801W, DLE5001W, DLE5955W, DLE7177WM and related models)
LG electric dryers — DLEX series (DLEX3885W, DLEX5780VE, DLEX7177WM and related models)
LG gas dryers — DLG series (DLG2251W, DLG2351W, DLG3171W, DLG3744W, DLG3788W, DLG5002W and related models)
LG gas dryers — DLGX series (DLGX3886W and related models)
Kenmore / Sears dryers — 796-series (LG-built electric and gas models)
Important: This roller is sold individually. LG dryers use four drum support rollers — replace all four at the same time for even drum support and longest service life. Order 4 of this part per repair.
Key Features
Supports and cradles the drum rim as it rotates for smooth, quiet operation
Center bushing design — rubber wheel over plastic hub with metal shaft for durability and smooth rotation
Sold individually — order 4 per repair (LG dryers use 4 rollers: 2 front, 2 rear)
Kit includes: 1 roller assembly, 1 dual-end shaft (threaded and hex), 2 tri-ring retaining clips
Dimensions: 3"L x 2-3/8"W x 3"H per roller
4581EL2002C is the current revision — covers 4581EL2002A, B, D, and E variants
Replaces 4581EL2002A, 4581EL2002B, 4581EL3001A, 4581EL3001C, DE2002A, 2701044, AP5688895, and PS8260240
Often replaced together with drum belt (4400EL2001A) and idler pulley (4561EL3002A)
Compatible with LG DLE, DLEX, DLG, DLGX series and Kenmore 796-series dryers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
4581EL2002C
Also Replaces
4581EL2002A, 4581EL2002B (prior revisions)
Part Type
Dryer Drum Support Roller Assembly
Condition
Aftermarket Replacement
Application
LG and Kenmore Gas and Electric Dryers
Quantity
Sold individually — order 4 per repair
Dimensions
3"L x 2-3/8"W x 3"H (per roller)
Design
Center bushing — rubber wheel / plastic hub / metal shaft
Material
Rubber / Plastic / Metal
Color
Black / Red
Includes
1 roller assembly, 1 dual-end shaft, 2 tri-ring retaining clips
Often Replaced With
4400EL2001A Drum Belt, 4561EL3002A Idler Pulley
Compatible Brands
LG, Kenmore (LG-built)
Installation Notes
⚠️ Unplug Dryer Before Starting — Wear Work Gloves Disconnect power (and shut off gas for gas dryers) before beginning. Wear work gloves — there are sharp sheet metal edges inside the LG dryer cabinet. Access the drum rollers by removing the rear panel of the dryer (most LG models). Take a photo of the belt routing and roller positions before removing anything. Release the drive belt from the idler pulley, lift the drum, and set it aside. Each drum roller is mounted on a fixed shaft in the dryer cabinet — the roller is held by two tri-ring retaining clips. Use needle-nose pliers to remove the old clips, slide the old roller off the shaft, and slide the new roller on. Install the new tri-ring clips to secure the roller. Repeat for all four rollers. Reinstall the drum, re-route the belt, and reassemble the rear panel. Restore power and run a test cycle to confirm quiet, smooth drum operation. Tip: while the dryer is open, also replace the drum belt (4400EL2001A) and idler pulley (4561EL3002A) if worn. Tools needed: Phillips screwdriver, Torx screwdriver (T20 on some models), needle-nose pliers, work gloves.
Frequently Asked Questions
How many drum rollers does my LG dryer have, and how many should I order?
LG dryers use four drum support rollers — two mounted at the front of the drum cavity and two at the rear. This listing is for a single roller. To replace all four at once (which is always recommended), order four of this part. Replacing all four at the same time ensures even drum support and eliminates the risk of a second disassembly in the near future when the remaining old rollers wear out.
What is the difference between 4581EL2002C and 4581EL2002A or 4581EL2002B?
These are successive production revisions of the same LG drum roller assembly. 4581EL2002A was the original, 4581EL2002B and C were updates, and D and E are further revisions. All variants are the same roller in terms of dimensions and function — if your dryer's parts diagram shows any of these part numbers, the 4581EL2002C is the correct current replacement. The 4581EL3001A, 4581EL3001C, and 4581EL3001E numbers are also alternate cross-references for this same roller family.
Should I replace the drum belt and idler pulley at the same time?
Yes — since the dryer must be fully disassembled to replace the drum rollers, this is the ideal time to also inspect and replace the drum belt (4400EL2001A) and idler pulley assembly (4561EL3002A). All three parts form the drum drive system and wear at similar rates. A worn belt or idler pulley is often what caused the rollers to wear prematurely in the first place. Replacing all three in one repair eliminates the most common LG dryer drum noise failure points and saves you from repeating the disassembly in the near future.
What causes LG dryer drum rollers to wear out?
Drum rollers wear naturally from the continuous load of supporting the rotating drum over thousands of drying cycles. Common factors that accelerate wear include operating the dryer with consistently very large or heavy loads, running cycles that are much longer than necessary (which increases total roller rotation time), lint buildup around the roller shafts causing the axle bushings to run dry, and a worn or broken drive belt that lets the drum sag and adds extra weight to the rollers. Regular dryer maintenance — including cleaning lint from around the drum and checking the belt — helps extend roller life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and load-bearing performance of the original 4581EL2002C drum roller assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5304519906 Dishwasher Pump and Motor Assembly
Product Overview
The XPARTCO 5304519906 Dishwasher Pump and Motor Assembly is designed to circulate water through the spray arms and ensure proper cleaning performance. This Motor & Pump Assembly is a replacement part for specific Frigidaire dishwasher models. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that dishes are cleaned effectively. You should replace this motor and pump assembly if it becomes faulty. Common causes of a bad motor and pump assembly include electrical issues, wear and tear from regular use, or blockages caused by debris or food particles.
Quick Answer
If your dishwasher is not cleaning dishes, has weak spray pressure, makes unusual noises, or fails to circulate water, the 5304519906 pump and motor assembly may be faulty. Replacing it restores proper wash performance and water circulation.
Replaces Part Numbers
Replaces OEM part number: 5304519906, 154843901, EAP12712308, AFR18422, PD00053471, AP6840161, P154792801.
Compatibility
This pump and motor assembly is compatible with select Frigidaire, Electrolux, Kenmore, and other compatible dishwashers.
Frigidaire Dishwashers
Electrolux Dishwashers
Kenmore Dishwashers
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Dishes not getting clean
Weak or no water spray
Dishwasher making loud or grinding noise
Water not circulating during wash cycle
Key Features
Integrated pump and motor assembly
Restores strong water circulation
High-quality aftermarket replacement
Reliable and durable construction
Product Specifications
Part Number: XP5304519906
Part Type: Dishwasher Pump and Motor Assembly
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Circulation
Troubleshooting Guide
Dishes remain dirty → Weak or failed pump motor
No spray action → Pump not circulating water
Loud noise during wash → Motor or impeller issue
When Should You Replace This Assembly?
Replace this assembly if your dishwasher is not cleaning properly, lacks water pressure, or makes abnormal noises during operation.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the pump and motor assembly from the bottom of the unit and install securely according to your dishwasher model.
Related Parts
Dishwasher Spray Arm
Water Inlet Valve
Drain Pump
Frequently Asked Questions
Will this assembly fit my dishwasher?This part fits many Frigidaire and compatible dishwashers. Always verify your model number.
What does a pump and motor assembly do?It circulates water through the dishwasher to clean dishes effectively.
What are signs of a bad pump motor?Poor cleaning, weak spray, or loud noises during operation.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO 349241T Dryer Drum Roller Set (2-Pack)
The XPARTCO 349241T is an aftermarket replacement dryer rear drum support roller set compatible with a wide range of Whirlpool-family 29-inch dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, and Magic Chef. The drum support rollers are cylindrical rubber-and-metal wheels mounted on shafts at the rear of the dryer cabinet that cradle and support the outer edge of the drum as it rotates. Without the rollers, the drum would drag directly on the cabinet, causing rapid wear and generating the loud thumping or squealing noise that indicates failing rollers.
This set includes 2 drum rollers, 4 tri-ring retaining clips, and 2 retaining washers — everything needed for a complete rear roller replacement. Each roller measures 3-1/4"L x 1"W x 3-1/4"H and is constructed from rubber over a metal bearing hub with a plastic axle support. Both rollers must always be replaced at the same time. The set directly replaces 349241, 349241TVP, 8170, 8205, 337089, 340352, 661562, 3389901, 3397588, 3397590, AP3098345, PS347627, and several additional cross-reference numbers. Often replaced together with the drum belt (341241) and idler pulley (691366 or 279640) for a complete drum drive repair. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 349241T Dryer Drum Roller Set fixes Whirlpool-family 29" dryers that are squealing, thumping, rumbling, or where the drum is not turning smoothly. Set of 2 rollers with 4 tri-rings and 2 retaining washers. 3-1/4"L x 1"W x 3-1/4"H each. Replace both rollers at the same time. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, and Magic Chef 29" dryers. Replaces 349241, 8170, 8205, 337089, 3389901, AP3098345, PS347627.
Common Problems This Part Fixes
Loud thumping, rumbling, or squealing noise during the drying cycle
Grinding or scraping sound when the drum is turning
Drum turning unevenly or wobbling during operation
Drum not spinning — rollers so worn they can no longer support the drum
Squealing or squeaking that gets worse over time as roller bearings degrade
Marks or scuff lines on clothes — drum dragging against the dryer cabinet
Excessive vibration during the drying cycle
Replaces Part Numbers
This drum roller set directly replaces the following OEM and cross-reference part numbers:
349241T, 26000349241, 337089, 3389901, 3397588, 3397590, 340352, 3436, 349241, 349241TVP, 661562, 8170, 8205, 99989678, 99989679, AWP39168, AH347627, EA347627, K34-895, PD00002257, EAP347627, AP3098345, PS347627.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller set is compatible with select 29-inch gas and electric dryers from the following brands:
Whirlpool dryers (gas and electric — 29" models)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers
KitchenAid dryers
Amana dryers
Roper dryers
Crosley dryers
Estate dryers
Inglis dryers
Admiral dryers
Magic Chef dryers
Note: The 349241T rollers are for 29-inch Whirlpool-family dryers. Newer Whirlpool Duet front-load dryers and larger-capacity models use different roller part numbers (such as WPW10314173 / 8536974). Always verify your model number before ordering.
Key Features
Set of 2 rear drum support rollers — supports and cradles the drum as it rotates for smooth, quiet operation
Includes all hardware: 2 rollers, 4 tri-ring retaining clips, 2 retaining washers — everything needed for a complete installation
Dimensions: 3-1/4"L x 1"W x 3-1/4"H per roller
Rubber wheel over metal bearing hub with plastic axle support — designed to resist wear and heat under continuous drum load
Both rollers must be replaced at the same time — replacing only one results in uneven drum support and accelerated wear on the new roller
Often replaced together with the drum belt (341241) and idler pulley (691366 or 279640) for a complete drum drive repair
Compatible with 11 major appliance brands on the Whirlpool 29-inch platform
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
349241T
Part Type
Dryer Rear Drum Support Roller Set
Condition
Aftermarket Replacement
Application
29-inch Gas and Electric Dryers
Quantity
Set of 2 rollers (replace both at the same time)
Roller Dimensions
3-1/4"L x 1"W x 3-1/4"H (per roller)
Material
Rubber wheel / Metal bearing hub / Plastic axle support
Color
Black / White
Kit Includes
2 drum rollers, 4 tri-ring retaining clips, 2 retaining washers
Often Replaced With
341241 Drum Belt, 691366 or 279640 Idler Pulley
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the screws inside the lint screen housing. Use a putty knife to release the top panel spring clips and lift the top panel. Remove the front panel to access the drum. Release the drive belt from the idler pulley, lift the drum forward, and set it aside. The rear drum support rollers are mounted on shafts on the rear bulkhead — each roller is secured with a tri-ring clip and a retaining washer. Use needle-nose pliers to remove the old tri-ring clips, then slide the old rollers off the shafts. Install the new rollers, new retaining washers, and new tri-ring clips on the shafts. Reinstall the drum, re-route the belt around the motor and idler pulley, and reassemble the front and top panels. Restore power and run a test cycle to verify quiet, smooth drum operation. Tip: while the dryer is open, inspect and replace the drum belt (341241) and idler pulley (691366 or 279640) if worn. Tools needed: Phillips screwdriver, 1/4" or 5/16" nut driver, putty knife, needle-nose pliers.
Frequently Asked Questions
What do the drum support rollers do?
The rear drum support rollers are cylindrical wheels mounted on fixed shafts at the back of the dryer cabinet. As the drum rotates, its rear outer rim rests on these rollers, which carry the drum's weight and allow it to spin smoothly and quietly. When the rubber wheels wear down or the bearing hubs corrode, the drum no longer rides smoothly on the rollers — causing thumping, rumbling, or squealing noises that get progressively worse. In severe cases, worn rollers allow the drum to sag and drag against the cabinet rear panel.
Why must I replace both rollers at the same time?
Both rear drum support rollers carry the same load and experience the same wear through every drying cycle. When one roller fails, the other has been under the same stress for the same number of cycles and is almost certainly near the end of its useful life. Replacing only the failed roller leaves one worn roller supporting the drum unevenly, which puts extra stress on the new roller and causes it to wear out much faster. Replace both rollers at the same time to ensure even drum support and get the full service life from the new parts.
Should I also replace the belt and idler pulley at the same time?
Yes — this is the ideal time. Since the dryer must be fully disassembled to access the rear drum rollers, replacing the drum belt (341241) and idler pulley (691366 or 279640) at the same time is strongly recommended. All three parts wear at similar rates, and a worn belt or idler pulley is often what caused the rollers to wear prematurely. Doing all three in one repair eliminates the most common drum drive failure points and saves you from repeating the teardown in the near future. The 4392065 maintenance kit includes all three parts together.
What causes dryer drum rollers to wear out?
Drum rollers wear naturally over time from the continuous load of supporting the rotating drum. The most common accelerating factors are operating the dryer with a worn or broken belt (which allows the drum to sag and puts extra weight on the rollers), running very large or heavy loads frequently, and allowing lint to accumulate around the roller shafts, which causes the bearings to run dry and wear faster. Regular dryer maintenance — including cleaning lint from around the drum and periodically checking the belt — helps extend roller life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement set built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, metal, and plastic to match the dimensions and load-bearing performance of the original 349241T drum roller set.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
154825001 Genuine OEM Frigidaire Dishwasher Heating Element
The 154825001 is a genuine Frigidaire OEM round heating element that sits exposed at the bottom of the dishwasher tub. Unlike a hidden element concealed beneath the tub floor, this is a visible ring-shaped element you can see sitting right in the bottom of the wash chamber. It serves two jobs: it heats the wash water to the temperature needed to properly dissolve detergent and break down grease and food soil, and at the end of the cycle it provides the heat that drives the drying phase, helping moisture evaporate off your dishes rather than leaving them wet.
Mounted through a 0.98" hole with two mounting nuts and connected by two wire terminals, this element carries a pair of white alignment dots that must line up with the tub's retaining clips during installation. Over time, mineral buildup from hard water, general corrosion, or simple electrical wear can cause the element to fail. A failing or dead element produces a specific and recognizable pattern: water never gets hot enough to clean effectively, dishes come out wet at the end of the cycle instead of dry, and the whole cycle may run noticeably longer as the dishwasher's control tries to compensate. It directly replaces AP5628696, 154482901, 154663801, 2308825, PS3653449, and EAP3653449. As a genuine OEM part, the 154825001 is manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The 154825001 Genuine OEM Frigidaire Dishwasher Heating Element fixes Frigidaire, Kenmore, Electrolux, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse dishwashers with dishes that don't get properly clean, dishes that come out wet instead of dry, or cycles that take longer than they used to. Exposed round heating element, 0.98" mounting hole, 2 wire terminals. Replaces AP5628696, 154482901, 154663801, 2308825, PS3653449, EAP3653449. Before replacing, test the old element with a multimeter for resistance — a bad control board relay can produce identical symptoms with a perfectly good element.
Common Problems This Part Fixes
Dishes not getting properly clean because wash water isn't reaching the correct temperature
Dishwasher not drying dishes — items come out wet at the end of the cycle
Cycle taking noticeably longer than usual to complete
Visible damage, corrosion, or discoloration on the element itself
Element that doesn't glow or heat up when the wash cycle is running
Water leaking near the high-temperature wire connector at the element terminals
Mineral scale buildup visible on or around the element
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher heating element directly replaces the following OEM and cross-reference part numbers:
154825001, 154482901, 154663801, 2308825, AP5628696, AFR14520, EAP3653449, PD00000951, PS3653449.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This heating element is compatible with select Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse dishwashers, spanning a wide range of model series including BBBD, BGBD, BGHD, DGBD, DGCD, DGHD, FDB, FDBB, FDBD, FFBD, FFID, FGBD, FGCD, FGHD, FGID, FPHD, FPID, GLD, GSB, LEDB, LFBD, LFID, LGBD, LGHD, and PLD.
Verified model numbers include: FFCD2413UW1A, FGID2466QF4A, FGID2466QF5A, FFID2426TD1A, FGBD2438PF4A, FGHD2465NF1A, FGHD2433KF1, LFID2426TF1A, LFID2422RF0A, LFID2422RF3B, LFID2422RF4B, LFID2426TF4A, LFID2426TF5A, LGBD2431LF0A, LGBD2431NF0B, LGBD2431NF1B, LGBD2432LW0A, LGBD2432LW0B, and CDB350/CDB500/CDB900 series models. Also fits Kenmore 587-series, Crosley CBD-series, Kelvinator KADB240, and White-Westinghouse WWBD2400 dishwashers.
Note: This is an exposed round heating element sitting visibly in the bottom of the tub, not a hidden element mounted underneath. It is not interchangeable with hidden/concealed heating elements used on other dishwasher platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified heating output and terminal configuration
Exposed round design sits in the tub bottom for direct water heating and drying support
Resolves "not cleaning properly," "not drying," and "cycle taking too long" symptoms caused by element failure
0.98" mounting hole with two mounting nuts and wire terminals
Two white alignment dots for correct positioning in the tub's retaining clips
Direct drop-in replacement — no modification required
Replaces 154482901, 154663801, 2308825, AP5628696, PS3653449, and EAP3653449
Compatible with Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
154825001
Part Type
Dishwasher Round Heating Element (Exposed)
Condition
Genuine OEM
Brand
Frigidaire / Electrolux
Location
Bottom of the wash tub (exposed, visible)
Mounting Hole
0.98 in.
Terminals
2 wire connections + 2 mounting nuts
Alignment
2 white dots must align with tub retaining clips
Repair Difficulty
Medium — basic dishwasher familiarity required
Tools Required
Screwdrivers, wrench set
Quantity
1 heating element
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, Westinghouse
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Before Starting — Handle The Element Carefully Disconnect power at the circuit breaker and shut off the water supply before beginning. Wear work gloves. On many models you'll need to pull the dishwasher out from under the counter to access the undercarriage — remove the two screws securing the unit to the counter first. Remove the lower rack and the lower spray arm (it typically pushes down and twists to unlock) to access the element inside the tub. From underneath, disconnect the two wires from the element's terminals and remove the two mounting nuts with a 1/2" wrench, taking care not to overtighten when you reach the new element — over-torquing can crush the sealing washers and cause a leak at the connector. Lift the old element free from its retaining clips inside the tub. To install the new 154825001, locate the two white alignment dots on the element and position them so they slide into the tub's retaining clips correctly — this ensures the element seats in its proper orientation. Push the terminals down through the mounting hole, then from underneath, reinstall and tighten the mounting nuts snugly but not excessively. Reconnect the two wires to the terminals, reinstall the lower spray arm and press it down to lock it in place, and reinstall the lower rack. Restore water and power, then slide the dishwasher back into place and secure it to the counter with its mounting screws. Run a test cycle and check underneath for any leaks at the element connection before considering the repair complete. Tools needed: screwdriver, 1/2" wrench, work gloves.
Frequently Asked Questions
How do I know it's the heating element and not something else, like the control board?
Before replacing the element, it's worth testing it with a multimeter for resistance — a healthy element typically reads in the neighborhood of 14 ohms, though exact values vary by model. If the old element tests fine but dishes still aren't drying or getting hot enough, the more likely cause is upstream of the element itself, such as a control board relay that isn't sending power to it correctly. Some owners have replaced a perfectly good element only to find the actual fault was a bad solder connection on the control board relay — testing first can save you an unnecessary purchase.
Can I clean the element instead of replacing it?
Light surface cleaning to remove mineral scale buildup is reasonable and can sometimes help if reduced heating output is due to scale insulating the element. However, if the element tests as an open circuit (no continuity) or shows visible damage, cracking, or corrosion through the metal sheath, cleaning won't restore it — replacement is the correct fix at that point.
I noticed water leaking near the element's wire connector. Is that related?
Yes, this is a documented failure point on this element design — the high-temperature wire connector at the terminals can develop a leak, especially if the mounting nuts were overtightened during a prior installation and damaged the sealing washer. When installing the new element, tighten the mounting nuts snugly but avoid excessive force, which helps prevent this same leak point from recurring.
Do I really need to pull the dishwasher out from under the counter?
On most installations, yes — accessing the mounting nuts and wire terminals underneath the tub requires pulling the unit forward after removing the two screws that secure it to the counter. Some technicians have managed the nut removal with a deep socket without fully pulling the unit, but planning for full access makes the job considerably easier, especially the first time.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original heating output, mounting configuration, and terminal layout of the element originally installed in your dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DD94-01002A Dishwasher Mounting Installation Kit for Samsung.
High-quality dishwasher mounting installation kit designed to help secure compatible dishwashers properly during installation.
✓ Dishwasher Installation Part ✓ Replaces DD94-01002A ✓ Compatibility Support
Product Description
The XPARTCO DD94-01002A Dishwasher Mounting Installation Kit is used to help secure compatible dishwashers during installation. Proper mounting helps keep the dishwasher stable, aligned, and safely positioned under the countertop or cabinet opening.
Replacing missing, damaged, or worn mounting hardware can help restore a secure dishwasher installation and prevent unwanted movement during use.
Quick Answer
If your dishwasher is loose, shifting, not secured under the counter, or missing mounting hardware, the DD94-01002A dishwasher mounting installation kit may be needed.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not secured properly
Missing dishwasher mounting hardware
Dishwasher shifting during use
Loose dishwasher installation
Damaged or worn mounting brackets
Replaces part Number
DD94-01002A, 2077601, AP4450818, ASM941007, PD00007402, EAP4222710, PS4222710.
Compatibility
This part fits select Samsung and compatible dishwasher models using part number DD94-01002A.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher mounting installation kit
Helps secure dishwasher in place
Supports proper dishwasher alignment
Designed for compatible dishwasher models
Quality aftermarket replacement part
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Mounting Installation Kit
Primary Part Number
DD94-01002A
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power before installation. Follow the dishwasher installation instructions and verify the unit is level, aligned, and securely mounted before use.
Troubleshooting Guide
⚠️ Disconnect power before servicing or installing the dishwasher.
Check if the dishwasher is level and properly aligned.
Inspect mounting brackets and screws for damage or missing hardware.
Confirm the dishwasher does not shift when the door is opened or closed.
Replace the mounting kit if hardware is missing, damaged, or no longer secure.
When Should You Replace This Part?
Replace the dishwasher mounting installation kit if the dishwasher is loose, shifting, not properly secured, or if the original mounting hardware is missing or damaged.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
```
