XPARTCO W10238100 Refrigerator Water Valve
The XPARTCO W10238100 is an aftermarket replacement single primary water inlet valve for Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis, and Ikea names. The valve is an electrically operated solenoid that opens to let water from the household supply line into the refrigerator's water system, and closes to stop it. When the valve fails, the refrigerator can stop supplying water to the dispenser and ice maker, make little or no ice, leak, or, if it no longer shuts off, overfill the ice maker and build up ice and frost.
This valve is a direct replacement for the OEM W10238100 / WPW10238100 and is a simple repair for most owners, typically 15–30 minutes. Some refrigerators also use a separate dual-solenoid valve, so check the Compatibility note before ordering.
Quick Answer
The XPARTCO W10238100 Water Valve fixes a Whirlpool-built refrigerator with no water at the dispenser, little or no ice, an overflowing ice maker, or a leak caused by a failed water inlet valve. Single primary water inlet valve, aftermarket replacement for W10238100 and WPW10238100. Classic symptom: the dispenser gives little or no water and the ice maker isn't making ice, even though the water supply is on.
Common Problems This Part Fixes
Water dispenser not working, or giving only a trickle
Ice maker not making ice
Ice maker overflowing, with ice or frost buildup
Water leaking from the refrigerator
Valve making noise or not shutting off properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water valve replaces the following part numbers:
WPW10238100, W10238100, W10498992, IMV-8100, K-78199, AP6017532, AWP50143, EAP11750831, PD00002616, PS11750831
These are Whirlpool's un-prefixed and earlier numbers for this valve. If your old valve or parts diagram shows any of them, match against this list.
Compatibility
This valve is listed for refrigerators from the Whirlpool family of brands:
Whirlpool, KitchenAid, Maytag, Jenn-Air, Inglis, and Ikea
Kenmore, including models such as 10641162310, 10651132210, and 10651149110
Other models include ISC21CNEDS00, KRSC503ESS00, KSC24C8EYY02, and WRF560SEHZ00
Note: This is a single primary water inlet valve. Some refrigerators use a separate dual-solenoid valve for the ice maker and dispenser, which is a different part. The model list above is only a sample, so confirm fit by matching the number on your old valve or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Aftermarket replacement single primary water inlet valve
Replaces W10238100, WPW10238100, and W10498992
Restores water to the dispenser and ice maker, and proper shut-off
Fits select Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis, and Ikea refrigerators
Simple replacement, typically 15–30 minutes
Product Specifications
Part Number
XPW10238100
OEM Part Number
W10238100, WPW10238100
Part Type
Refrigerator Single Primary Water Inlet Valve
Condition
Aftermarket Replacement
Application
Select Whirlpool, KitchenAid, Kenmore, Maytag, Jenn-Air, Inglis & Ikea Refrigerators
Installation Notes
⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Following your model's service guide, pull the refrigerator out and remove the rear access panel to reach the valve. Disconnect the water lines from the old valve, and the wiring connector from its solenoid, then remove the mounting screws. Install the new valve in the same position, reconnect the wiring and water lines securely, and replace the panel. Restore water and power, check every connection for leaks, and run water through the dispenser for a few minutes to flush the line. The valve needs at least 20 psi of water pressure to shut off properly, so if the ice maker still overflows, check the supply pressure.
Frequently Asked Questions
My dispenser has no water and the ice maker isn't working. Is this the part I need?
It can be. Before replacing the valve, check that the water supply is on, the supply line isn't kinked, and the water filter isn't clogged. If those are fine, a failed water inlet valve is a likely cause.
My ice maker is overflowing. Could it be the valve?
Yes. A valve that doesn't shut off fully will keep letting water in. Also confirm your water pressure is at least 20 psi, since low pressure can stop the valve from closing properly.
My refrigerator has a dual-solenoid valve. Will this work?
No. This is a single primary valve, and the dual-solenoid valve is a different part. Check your parts diagram or contact our support team with your model number.
Is this an OEM part?
No. This is an XPARTCO aftermarket replacement built to match the Whirlpool W10238100. If you prefer a genuine OEM valve, contact us.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
PK136277-2 Lower Dishrack Roller and Axle Set
Pack of 2
Replaces: WD12X10136, WD12X10277
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD26X23258 Dishwasher Genuine Circulation Pump
Genuine dishwasher circulation pump designed to move water through the spray arms and restore proper wash performance.
✓ Genuine Part ✓ Replaces WD26X23258 ✓ Compatibility Support
Product Description
This Pump is a Genuine component for specific GE dishwasher models. It refers to the water pump component that circulates water throughout the dishwasher during cycles. Common cause of a faulty pump can include normal wear over many uses. The continuous motor operation puts strain on internal seals and impellers. Mineral deposits from hard water can also clog pump parts over time.
Replacing a faulty circulation pump can help restore proper water movement and improve dishwasher cleaning performance.
Quick Answer
If your dishwasher is not washing properly, has weak spray pressure, or makes unusual pump noise, the WD26X23258 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Circulation pump noise
Water not circulating during wash cycle
Poor wash performance
Replaces part Number
WD26X23258, 4466766, WD26X22285, WD26X22518, WD26X22826, AGE25293, AP6039424, EAP11772000, PD00041691, PS11772000.
Compatibility
This part fits select GE, Hotpoint, Kenmore, and compatible dishwasher models using part number WD26X23258.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Genuine dishwasher circulation pump
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
Reliable replacement component
Product Specifications
Brand
GE
Part Type
Dishwasher Circulation Pump
Primary Part Number
WD26X23258
Compatible Appliance Type
Dishwasher
Condition
Genuine New
Installation
Disconnect power and water supply before installation. Inspect hoses and seals for leaks after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms for blockage before replacing the pump.
Inspect pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout
XPWE12X10013 Dryer Idler Pulley
Description: This Idler Arm Assembly is a replacement part for Specific GE clothes dryer models. It is a pulley assembly that helps to guide the dryer belt and keep it aligned.
Replaces Part Numbers:WE12X10013, 1475471, AH2322399, EA2322399, AP4345530, PS2322399.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
ADQ56656401 Genuine OEM LG Dryer Lint Screen
The ADQ56656401 is a genuine LG OEM lint filter screen for LG and select Kenmore Elite front-load dryers. This is the removable screen that sits in the lint trap opening at the top of the dryer, catching lint and fabric fibers out of the exhaust airflow before they can reach the vent duct. Keeping this screen intact and free of buildup is one of the most important things you can do for your dryer's performance — a torn, missing, or heavily clogged screen doesn't just slow drying, it lets more lint travel downstream into the ducting, which is a well-documented fire risk factor for dryers generally.
Built with an ABS plastic frame and a stainless steel mesh screen, this filter measures approximately 11.9" x 10.9". Over time the mesh can tear, the frame can crack, or the screen can simply wear out and stop trapping lint as effectively as it should. A worn or damaged lint screen typically shows up as drying times that have crept longer than they used to, visible lint on clean clothes, or a screen that's visibly torn, bent, or missing sections of mesh. It directly replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962.
Quick Answer
The ADQ56656401 Genuine OEM LG Dryer Lint Screen fixes LG and select Kenmore Elite front-load dryers with a torn, cracked, missing, or heavily worn lint filter, showing up as longer drying times or lint on clean clothes. ABS frame with stainless steel mesh, approximately 11.9" x 10.9". Replaces AP4457244, 1462822, AH3531962, EA3531962, PS3531962. Not the same filter as ADQ56656403, which is a slightly smaller (11.2" x 10.9") screen used on LG WashTower models.
Common Problems This Part Fixes
Drying times that have gradually gotten longer than they used to
Lint visible on clean clothes after a cycle
Lint screen visibly torn, cracked, or missing sections of mesh
Screen frame that's cracked, warped, or won't seat properly in the trap opening
Reduced airflow through the dryer overall
Lint screen that has gone missing and needs straightforward replacement
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer lint screen directly replaces the following OEM and cross-reference part numbers:
ADQ56656401, AP4457244, EAP3531962, PS3531962, ALG52875, PD00001720, AH3531962, EA3531962
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lint screen is compatible with select LG front-load dryers, and also fits select Kenmore Elite dryers built on the LG platform, including model numbers such as:
DLE3170W, DLE3400W, DLE3500W, DLE3600V, DLE3050W
DLEX3360V, DLEX3370V, DLEX3370W, DLEX3370R, DLEX3470V, DLEX3470W, DLEX3570V, DLEX3570W, DLEX3700V, DLEX3700W, DLEX3900W, DLEX4370K, DLEX3001R
DLG3171W, DLG3401W, DLGX3361R, DLGX3361V, DLGX3361W, DLGX3371V, DLGX3371W, DLGX3471W, DLGX4271W, DLGX3002R
DLE2601R, DLE2601W, DLE2701V, DLEX2801L, DLEX2801R, DLEX2801W, DLEX2901V, DLEX3001W, DLEX3001P, DLEX3875V, DLEX3875W
DLG2602R, DLG2602W, DLG2702V, DLGX2802L, DLGX2902V, DLGX3002P, DLGX3002W, DLGX3876V
Kenmore Elite RN1308AS, RN1308BS, RN1308CS, RN1310A, RN1310AS, RN1310B, RN1310BS, RN1310DS, RN1319E, RN1319VS, RN1321VS, RV1308AS, RV1308BS, RV1308CS, RV1310A, RV1310AS, RV1310B, RV1310BS, RV1310DS, RV1319E, RV1319VS, RV1321AS, RV1321VS
Note — not the same as ADQ56656403: This lint screen is approximately 11.9" x 10.9". A similarly-numbered part, ADQ56656403, is a slightly smaller 11.2" x 10.9" screen used on LG WashTower models such as DLEX4000W, DLGX4001W, DLGX4201B, and DLGX4201W. The two are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which lint screen fits your dryer.
Key Features
Genuine LG OEM part — factory-specified frame dimensions and mesh density
ABS plastic frame with a stainless steel mesh screen for durability
Resolves "longer drying times," "lint on clean clothes," and "torn or missing screen" symptoms
Traps lint and fabric fibers before they reach the exhaust ducting
Approximately 11.9" x 10.9"
Direct drop-in replacement — lifts out and in with no tools required
Replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962
Compatible with LG and select Kenmore Elite front-load dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
ADQ56656401
Part Type
Dryer Lint Screen / Filter
Condition
Genuine OEM
Brand
LG
Frame Material
ABS plastic
Screen Material
Stainless steel mesh
Dimensions
Approx. 11.9" x 10.9"
Location
Lint trap opening, top of dryer
Repair Difficulty
Very Easy — no tools required
Quantity
1 lint screen
Compatible Brands
LG, Kenmore Elite
Installation Notes
This is a simple, tool-free repair. With the dryer unplugged or off, locate the lint trap opening at the top of the dryer and pull the old lint screen straight up and out. Line up the new ADQ56656401 screen with the same opening and slide it back down into place until it seats fully and sits flush. There's no need to disconnect power for this repair, but it's good practice to do so if you're also cleaning out the trap housing itself. While the screen is out, take a moment to wipe down the inside of the lint trap housing to clear any accumulated lint before reinserting the new screen. Tools needed: none.
Frequently Asked Questions
My drying times have gotten longer. Is a worn lint screen really the cause?
It's one of the most common and easiest-to-fix causes. A torn or heavily worn screen lets lint pass through into the ducting instead of being caught, which restricts airflow further downstream and makes the dryer work harder to move air. Combined with regularly cleaning the screen after every load, a fresh screen in good condition helps restore normal drying times.
Is it actually important to replace a torn lint screen, or is it just cosmetic?
It's worth replacing rather than continuing to use a damaged screen. A torn or heavily worn lint filter lets more lint travel past it into the dryer's internal ducting and exhaust path, and lint buildup in that ducting is a well-documented dryer fire risk factor. Combined with never running the dryer without a lint filter in place at all, keeping the screen in good condition is a simple, inexpensive way to reduce that risk.
Do I need any tools to replace this?
No. The lint screen simply lifts straight out of its slot and the new one slides straight back in — no tools, no disassembly required.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original frame dimensions, mesh material, and fit of the lint screen originally installed in your LG or Kenmore Elite dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11612326 Dishwasher Circulation Pump (OE)
OE-style dishwasher circulation pump designed to move water through the spray arms and restore proper dishwasher wash performance.
✓ Dishwasher Repair Part ✓ Replaces W11612326 ✓ Compatibility Support
Product Description
The XPARTCO W11612326 Dishwasher Circulation Pump moves water through the dishwasher spray arms during the wash cycle. A faulty circulation pump can cause poor cleaning, weak water pressure, unusual pump noise, or incomplete wash performance.
Replacing a failed dishwasher circulation pump can help restore proper water circulation and improve dishwashing results.
What is OE ?: “OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts. They offer identical fit and function to OEM (Original Equipment Manufacturer) components but are typically sold under independent brands like XPARTCO for better affordability.
Quick Answer
If your dishwasher is not cleaning properly, has weak spray arm pressure, or makes unusual pump noise, the W11612326 circulation pump may need replacement.
⚠️ Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dishwasher not cleaning dishes properly
Weak spray arm water pressure
Water not circulating during wash cycle
Unusual circulation pump noise
Poor dishwasher wash performance
Replaces part Number
W11612326, W10879262, W10805386, W11521435, AP7193729, PS16744934, 4460096, AP6027386, AWP45622, AP16744934, PD00080710, PS11759751.
Compatibility
This part fits select Whirlpool, KitchenAid, Maytag, Amana, and compatible dishwasher models using part number W11612326.
Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Dishwasher circulation pump replacement
Helps restore proper water circulation
Supports spray arm water pressure
Designed for compatible dishwasher models
“OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts.
Product Specifications
Brand
XPARTCO
Part Type
Dishwasher Circulation Pump
Primary Part Number
W11612326-OE
Compatible Appliance Type
Dishwasher
Condition
New
Installation
Disconnect power and water supply before installation. Inspect hoses, seals, and wiring connections after installation.
Troubleshooting Guide
⚠️ Disconnect power and water supply before servicing the dishwasher.
Check spray arms and filters for blockage before replacing the pump.
Inspect the circulation pump area for leaks or unusual noise.
Verify wiring connections are secure.
Replace the circulation pump if water circulation problems continue.
When Should You Replace This Part?
Replace the dishwasher circulation pump if the dishwasher has poor cleaning performance, weak spray pressure, unusual pump noise, or water is not circulating during the wash cycle.
Shop With Confidence
We are a U.S.-based appliance parts retailer specializing in high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse.
✓ Fast Shipping ✓ OE-Style Replacement ✓ Compatibility Support ✓ Secure Checkout
00622058 Dishwasher Genuine OEM Water Valve
Fits Specific Bosch Dishwasher Models
Description: This dishwasher Water Inlet Valve is a Genuine OEM part for specific Bosch dishwasher models. This component is responsible for controlling the flow of water into the dishwasher. It operates via electrical signals from the dishwasher's control board, opening to allow water to enter during the fill cycle and closing to prevent water from entering during other cycles.
✅ Key Features:
Genuine OEM Part for Bosch #00622058
120V, 60Hz single solenoid valve
Includes mounting bracket and hose connection port
Durable thermoplastic construction
🔁 Replaces Part Numbers:
00622058, 1999956, 622058, AH3491417, AP4927070, EA3491417, PS3491417, PS8728724.
🔧 Fixes These Common Symptoms:
Dishwasher not filling with water
Low or slow water flow
Water inlet error codes
Humming or clicking without water intake
Leaking around the valve area
🧰 Compatible With:
✔️ Bosch✔️ Thermador✔️ Gaggenau✔️ Siemens(Check your model number or contact us for assistance.)
✅ Affordable aftermarket solution
✅ Always Fast and Free U.S. shipping
✅ Backed by helpful support and easy returns
✅ Trusted by DIYers and appliance techs
🛒 Restore your dishwasher’s performance — order the 00622058 water inlet valve today from Parts-O-Matic.com, and get it delivered fast and free.
WD26X25104 Dishwasher Genuine OEM Drain Pump
Fits Specific GE Dishwasher Models.
Replaces Part Numbers: WD26X25104, WD26X22810, WD26X20306, AP6990087, PS16217045
Description: The Variable Drain Pump Kit is a Genuine OEM replacement part for select GE built-in dishwasher models. It includes both the drain pump and clamps needed to remove water from the dishwasher during cycles. Common causes are blockages in the drain hose inhibiting water outflow or failure of the electric pump motor components over extended use.
ERWD12X10136 Lower Dishrack Roller
Replaces Part Numbers: WD12X10136
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 3405-001034 Microwave Door Switch (Normally Open)
The XPARTCO 3405-001034 is an aftermarket replacement normally open (NO) microwave door interlock switch for select Samsung, Whirlpool, Maytag, Kenmore and other microwave ovens, replacing part 3405-001034. The switch detects when the door is fully closed and completes the safety circuit, so the microwave runs only when the door is shut. When it fails, the microwave may not start, may not heat, or may only run if you push or jiggle the door.
Microwaves often use more than one door switch, and each is sold individually. Check that the switch you are replacing is the normally open type and goes in the same position.
⚠️ Critical Safety Part — Switch Type And Position Must Match Exactly Door interlock switches work together as a safety system. Installing the wrong type (normally open vs. normally closed) or putting a switch in the wrong position can let the microwave run with the door open, a serious radiation hazard. Replace each switch with the exact same type in the exact same position, and test the microwave after replacement. If you are not qualified to service microwave ovens, use a trained technician.
Quick Answer
The XPARTCO 3405-001034 Microwave Door Switch (Normally Open) replaces a failed normally open door interlock switch on a compatible microwave. Replaces 3405-001034 and 3405-000178. Classic symptoms: the microwave won't start, won't heat, or only runs when you push or jiggle the door.
Common Problems This Part Fixes
Microwave won't start
Microwave runs but doesn't heat
Microwave only works if you push or jiggle the door
Microwave doesn't shut off properly when the door opens
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following part numbers:
3405-001034, 3405-000178, AP4044834, ASM392474, EAP11741686, PD00025810, PS4131192, WP3405-001034, AP6008546, AWP47167, PD00078424, PS11741686
Samsung also uses nearby numbers, such as 3405-001033, for different switches. They are not interchangeable by number alone. If your old switch shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This switch is listed for Samsung, Whirlpool, Maytag, Amana, Jenn-Air, Kenmore and Magic Chef microwave ovens and microwave/oven combinations, including these examples:
Kenmore 40180082010, 40180099700, 40185042010
Samsung SMH1622W
Note: The models above are a small sample of those listed by retailers. Confirm that your original switch is normally open and goes in the same position, check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Normally open (NO) microwave door interlock switch
Aftermarket replacement for Samsung and Whirlpool 3405-001034
Completes the safety circuit only when the door is fully closed
Sold individually, one switch per order
Product Specifications
Part Number
3405-001034
OEM Part Number
3405-001034
Part Type
Microwave Door Interlock Switch
Condition
Aftermarket Replacement
Switch Type
Normally Open (NO)
Application
Select Microwave Ovens and Microwave/Oven Combinations
Installation Notes
⚠️ Unplug Microwave And Beware Of The High Voltage Capacitor Unplug the microwave before starting and never operate it with the cabinet open. The high voltage capacitor can hold a lethal charge even after the microwave is unplugged. If your repair requires removing the outer cabinet, discharge the capacitor safely first, or have a qualified technician do the work.
⚠️ Photograph Switch Positions Before Removing Anything The switches are accessed at the door latch assembly. Before disconnecting anything, photograph each switch and its wiring, and move the wires one at a time so each goes back to the correct terminal. Make sure the actuator lines up with the latch and the switch clicks freely. After reassembly, test the microwave with a microwave-safe cup of water.
Frequently Asked Questions
My microwave won't heat or start. Is this the part I need?
A failed door switch is a common cause, but a microwave has several switches and other parts can cause the same symptoms. Identify which switch failed and confirm it is normally open before ordering.
Is this switch normally open or normally closed?
This is a normally open (NO) switch. It is not interchangeable with normally closed switches, which do a different job in the interlock system.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace part 3405-001034. If you specifically need a genuine part, contact our support team.
Will this fit my microwave?
It is listed for many Samsung, Whirlpool, Maytag and Kenmore models, but the model list above is only a sample. Check your full model number and the type and position of your original switch, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
ERP W10321304 Refrigerator Door Shelf Bin
Replaces Part Numbers:WPW10321304, W10321304, 2171046, 2171047, 2179574, 2179575, 2179607, 2179607K, 2198449, 2198449K, 2304235, 2304235K, W10321302, W10321303, W10549739, AP6019471, PS11752778.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO WB24X10146 Microwave Door Switch
The XPARTCO WB24X10146 is an aftermarket replacement micro switch (also called a door interlock switch) compatible with a wide range of GE, Hotpoint, RCA, Kenmore, and Sears over-the-range and countertop microwaves. This is a "stand on" style normally-open (NO) interlock switch, identified by the internal designation KW3A-NO, that mounts near the door latch and only closes its circuit when the door is fully shut and latched. The control board reads this switch as part of a multi-switch safety interlock chain that confirms the door is secure before allowing the magnetron to energize.
When this switch fails, the microwave commonly won't start at all, trips a door-related error code, or in rare cases can allow the unit to run with the door not fully secured — which is a safety-relevant fault, not just a convenience one. It directly replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO WB24X10146 Microwave Door Switch fixes GE, Hotpoint, RCA, and Kenmore/Sears microwaves that won't start, display a door-related error code, or have a door that doesn't reliably confirm as closed. Normally-open (NO) "stand on" interlock switch, rated 250VAC / 16A, with 0.187" (4.7mm) quick-connect terminals. Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163. Classic symptom: turntable light and display work, but pressing Start does nothing.
Common Problems This Part Fixes
Microwave won't start when Start is pressed, even though the display and light work
Door-related error code or fault light on the display
Microwave randomly shuts off mid-cycle
Door feels like it isn't latching or registering as closed
Clicking sound from the door area with no response from the microwave
Intermittent operation that seems tied to how hard the door is closed
⚠ Safety-Relevant Component Door interlock switches are safety components that prevent the magnetron from energizing unless the door is fully closed and latched. Never bypass, jumper, or defeat a microwave door switch to "get it working" — doing so can allow microwave energy to leak while the door is open, which is a genuine radiation safety hazard. Always disconnect power before servicing, and replace all interlock switches in the chain if more than one shows signs of wear.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This microwave door switch directly replaces the following OEM and cross-reference part numbers:
WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is compatible with a wide range of GE-built microwaves across the following brands:
GE over-the-range and countertop microwaves (JVM, PVM, and CEB series, including JEM3072DH1BB, JEM3072SH1SS, JNM3161DF2BB, and CCWK15C1W1DS/SS)
Hotpoint microwaves (GE-built models)
RCA microwaves (GE-built models)
Kenmore and Sears microwaves (select GE-built models)
Note: Do not confuse this with the similarly styled EXP499/EXP497 microwave door switches, which also use 4.7mm terminals but are not the same switch. WB24X10146 is a "stand on" style switch specific to GE's own interlock design — always match by part number, not terminal size alone. Always verify your appliance model number before ordering.
Key Features
Normally-open (NO) "stand on" door interlock switch, internal designation KW3A-NO
Resolves "won't start," "door error code," and "shuts off mid-cycle" symptoms caused by interlock switch failure
Rated 250VAC / 16A for reliable switching under microwave load
0.187" (4.7mm) quick-connect terminals for a secure wire connection
Direct-fit mounting to match the original interlock bracket
Replaces WB24X10146, WB24X28941, MW-7100-33, AGE22794, AH1019163, AP3866977, 1166990, EA1019163, EAP1019163, PD00039881, PS1019163
Compatible with GE, Hotpoint, RCA, Kenmore, and Sears microwaves across dozens of models
Aftermarket replacement built to OEM-equivalent quality and safety standards
Product Specifications
Part Number
XPWB24X10146
OEM Part Number
WB24X10146
Part Type
Microwave Door Interlock Switch ("Stand On" / KW3A-NO)
Condition
Aftermarket Replacement
Switch Type
Normally Open (NO)
Voltage Rating
250VAC
Current Rating
16A
Terminal Width
0.187" (4.7mm)
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Sears
Installation Notes
⚠️ Unplug Microwave Before Starting Disconnect power at the outlet, and for built-in/over-the-range units also switch off the dedicated circuit breaker — microwaves store high voltage in the capacitor even after unplugging. Remove the outer cabinet or control panel cover to access the door switch assembly near the latch mechanism. Photograph the wiring before disconnecting, since GE microwaves typically use two or three interlock switches wired in sequence and mixing up the connections can leave the unit unsafe to operate. Disconnect the quick-connect terminals from the old switch, noting which wire goes to which terminal. Remove the mounting screw(s) holding the switch to its bracket and remove the old switch. Install the new WB24X10146 in the same position and secure it with the mounting screw(s). Reconnect the terminals exactly as photographed. Reassemble the cabinet or panel, restore power, and test that the door registers correctly and the microwave starts normally. Tools needed: Phillips screwdriver, nut driver (for cabinet screws).
Frequently Asked Questions
My microwave's display and turntable light work, but it won't start — is this the part?
This is a classic symptom of a failed door interlock switch. The control board needs a confirmed "door closed and latched" signal from all switches in the interlock chain before it will energize the magnetron. If that signal is missing from even one switch, most GE microwaves will power up normally but refuse to start a cook cycle. Confirm with a multimeter continuity test on the suspect switch before ordering, since GE microwaves usually use more than one interlock switch.
Is this the same as the EXP499 or EXP497 microwave door switch?
No — while all three use similar 4.7mm terminals, they are different switches used in different microwave platforms and are not interchangeable. WB24X10146 is GE's own "stand on" KW3A-NO design. Always match by part number rather than terminal size or general appearance.
Is it safe to keep using the microwave if I suspect this switch is bad?
We'd recommend not continuing to use it until it's repaired. Door interlock switches exist specifically to prevent microwave energy from leaking out while the door is open or not fully latched. If a switch is failing intermittently, the microwave may seem to work sometimes, but that's not a reason to keep using it — replace the switch before further use, and never attempt to bypass or jumper an interlock switch.
How many interlock switches does my GE microwave have, and do I need to replace them all?
Most GE microwaves use two or three interlock switches wired in sequence (often a primary switch, a secondary/monitor switch, and sometimes a door sensing switch). You typically only need to replace the specific switch that's testing bad, but if one has failed from age or wear, the others are often not far behind — some technicians replace the full set at once to avoid a repeat repair call.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
