XPARTCO W11366438 Range Surface Burner Knob
Product Overview
The XPARTCO W11366438 Range Surface Burner Knob is designed to control the heat level of your stove burners with precision. This high-quality replacement knob restores smooth operation and enhances the appearance of your cooktop.
Quick Answer
If your stove knob is cracked, loose, missing, or difficult to turn, the W11366438 burner knob is likely worn out. Replacing it restores proper burner control and usability.
Replaces Part Numbers
Replaces OEM part number: W11366438, W11084623, 4929319, W11359382, W11505414, EAP12723935, AWP44385, PD00054489, AP6888134, PS12723935.
Compatibility
This surface burner knob is compatible with select Whirlpool, Maytag, and other compatible ranges.
Whirlpool Ranges
Maytag Ranges
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Broken or cracked knob
Knob slipping or not engaging
Missing control knob
Difficulty adjusting burner heat
Key Features
Restores precise burner control
Easy push-on installation
High-quality aftermarket replacement
Durable construction for daily use
Product Specifications
Part Number: XPW11366438
Part Type: Range Surface Burner Knob
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Range Burner Control
Troubleshooting Guide
Knob spins freely → Worn insert
Cannot adjust flame → Damaged knob
Knob falls off → Cracked fitting
When Should You Replace This Knob?
Replace this knob if it is cracked, loose, missing, or not functioning properly.
Installation Notes
⚠️ Ensure the appliance is off. Pull the old knob straight off and push the new knob firmly onto the control shaft.
Related Parts
Surface Burner Valve
Igniter Switch
Control Panel Overlay
Frequently Asked Questions
Will this knob fit my range?This knob fits many Whirlpool and compatible models. Always verify your model number.
Is installation difficult?No, this knob is typically push-on and easy to install.
What are signs of a bad knob?Cracks, slipping, or inability to control heat settings.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
XPARTCO XPIBE1740 Microwave Light Bulb 40W Replaces 8206232A, WB25X10030
The XPARTCO XPIBE1740 is an aftermarket replacement 40-watt T8 appliance light bulb compatible with a wide range of microwaves, range hoods, refrigerators, ovens, and other kitchen appliances from GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, and more. It uses the standard E17 intermediate screw base found on most over-the-range and built-in microwave interior lights, range hood lights, and select appliance bulb sockets. With a clear T8 glass envelope, warm white 2800K color temperature, and 280-lumen output, it matches the brightness and look of the original OEM bulbs it replaces.
Specifications: 40W, 125V (AC 110-130V/60Hz), E17 intermediate screw base, T8 shape (1" diameter × 2-3/8" length), 280 lumens, warm white (~2800K), dimmable (compatible with microwave HIGH/LOW light settings), 1000-hour rated life, working temperature High Temp Resistance 300℃. It directly replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, 0053437, 05200136, 05200137, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 261201500480, 3015548, 6912W1Z004B, AP5809052, PS2376034, and PS8767095. Installs in under 5 minutes — no tools required for the bulb itself.
Quick Answer
The XPARTCO XPIBE1740 Microwave Light Bulb (40W) replaces burned-out interior microwave lights, range hood lights, and select appliance bulbs across GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, and Hotpoint. T8 shape, 40W, 125V, E17 intermediate screw base. 1" diameter × 2-3/8" length. 280 lumens warm white (~2800K). Dimmable. 1000-hour life. Replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 6912W1Z004B, AP5809052, PS2376034, PS8767095. Make sure your appliance uses an E17 intermediate base — not E26 standard, E12 candelabra, or E14 European.
Common Problems This Part Fixes
Microwave interior light not working — bulb burned out
Range hood light bulb burned out — under-cabinet area no longer illuminates when cooking
Over-the-range microwave under-cabinet light not working
Bulb flickering or dimming inconsistently — filament starting to fail
Bulb visibly burned out, broken, or rattling when shaken (broken filament)
Microwave light works only intermittently — bulb on the verge of failure
Replacement after long service life — most appliance bulbs last about 2,000 hours
Replaces Part Numbers
This 40W appliance light bulb directly replaces the following OEM and cross-reference part numbers from multiple brands:
8206232A, 8206443, 8183993, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 1890433, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665, 4174608, 4338831, 4359625, 4393681, 53001372, 53422, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8189961, 8204855, 8205422, 8205586, 8206232, R0712013, R0712015, R0713503, R9900310, W10321375, W10598935, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001, AWP39609, PD00003046, AH2376034, EA2376034, AP4512653, PS2376034, WB25X10030, 261201500480, 3015548, AGE22225 PD00034740, AP5809052, PS8767095, 26QBP4093.
If your bulb part number isn't listed above, check that the base is E17 intermediate and the bulb is 40W — most appliance bulbs in this category are interchangeable. Contact our support team if you need confirmation.
Compatibility
This 40W E17 appliance light bulb is compatible with a wide range of microwaves, range hoods, refrigerators, and ovens using E17 intermediate base sockets, including:
GE over-the-range and countertop microwaves (interior lights)
GE Profile, Café, and Monogram microwaves and range hoods
Whirlpool microwaves and range hoods (over-the-range models)
KitchenAid microwaves (built-in and over-the-range)
Maytag microwaves (select models)
Amana microwaves (select models)
LG over-the-range microwaves
Frigidaire microwaves and range hoods (select models)
Kenmore / Sears microwaves (multi-brand-built models)
Hotpoint microwaves and range hoods
Corningware microwaves (select models)
Also fits select refrigerator interior light sockets, oven lights, and lava lamps using the same E17 base
Important — Check Your Base Type: This bulb uses an E17 intermediate screw base. It will NOT fit appliances designed for E26 (standard household), E12 (candelabra), or E14 (European) bases. The E17 base is the most common base for over-the-range microwaves and range hoods, but check your old bulb or appliance manual to confirm before ordering. Some newer LG microwaves use a 30W bulb instead of 40W — verify your wattage requirement as well.
Key Features
40-watt T8 appliance incandescent bulb — replaces burned-out interior lights in microwaves, range hoods, refrigerators, and select ovens
Standard E17 intermediate screw base — fits the most common appliance bulb socket
T8 shape: 1" (25mm) diameter × 2-3/8" (62mm) length — matches OEM bulb dimensions for clear cover fit
125V (works on AC 110-130V / 60Hz household power)
400 lumens of warm white light (~2800K) — matches the brightness and color of original incandescent OEM bulbs
Dimmable — compatible with microwave HIGH/LOW light settings without flicker
1000-hour rated lifetime — standard for appliance incandescent bulbs
Working temperature range: High Temp Resistance 300℃. — suitable for microwave and range hood heat environments
Replaces 8206232A, 1890433, AP4512653, WB25X10030, WB36X10003, W10321375, W10598935, 6912W1Z004B, and many additional cross-references
Multi-brand cross-compatibility: GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY replacement — installs in under 5 minutes
Product Specifications
Part Number
XPIBE1740
Common OEM Replacements
8206232A, WB25X10030, WB36X10003, 6912W1Z004B
Part Type
Appliance Light Bulb (Incandescent)
Condition
Aftermarket Replacement
Application
Microwave, Range Hood, Refrigerator, Oven, Appliance Lights
Wattage
40W
Voltage
125V (operates AC 110-130V / 60Hz)
Base Type
E17 Intermediate Screw Base
Bulb Shape
T8
Dimensions
1" (25mm) D x 2-3/8" (62mm) L
Brightness
280 lumens
Color Temperature
Warm White (~2800K)
Cover
Clear glass
Dimmable
Yes — compatible with HIGH/LOW microwave settings
Lifetime
over 2,000+
Working Temperature
High Temp Resistance 300℃.
Compatible Brands
GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Installation Notes
⚠️ Let the Bulb Cool Completely Before Touching — Unplug Microwave Before replacing the bulb, unplug the microwave (or disconnect power at the breaker for hardwired range hoods) and allow the old bulb to cool completely — incandescent appliance bulbs run very hot, and the glass can stay hot for several minutes after the light is turned off. For an over-the-range microwave's interior light, the bulb is typically accessed through a small panel or by removing a screw-on cover inside the microwave cavity. For under-cabinet/exterior lights, access the bulb by removing the protective cover or vent grille on the bottom of the microwave or range hood. Unscrew the old bulb counterclockwise and dispose of it safely. Screw in the new XPIBE1740 bulb clockwise — hand-tight only, do not over-tighten. Avoid touching the glass envelope of the new bulb with bare fingers; skin oils on the glass can shorten bulb life. If you must touch the glass, wipe it down with a clean cloth before powering the appliance back on. Replace the cover, restore power, and confirm the light works. Tools needed: none for most models, or a small Phillips screwdriver if a panel/cover must be removed.
Frequently Asked Questions
How do I know if I need an E17, E26, or E12 base bulb?
The "E" number refers to the screw base diameter in millimeters. E17 (intermediate) is 17mm — the most common size for over-the-range microwave interior lights, range hood lights, and many appliance lights. E26 (medium/standard) is 26mm — typical household light bulbs (do NOT fit appliance sockets). E12 (candelabra) is 12mm — used for chandelier and decorative bulbs. E14 (European intermediate) is 14mm — common in Europe but rare in U.S. appliances. The XPIBE1740 is an E17 intermediate base. If your old bulb is noticeably smaller or larger than what you're holding, it's the wrong base — confirm by comparing dimensions or checking your appliance manual before ordering.
Can I use an LED bulb instead of this incandescent one?
In many appliances, yes — LED appliance bulbs with E17 intermediate bases are available and use significantly less power for similar brightness. However, LED bulbs sometimes have compatibility issues with the dimming/HIGH-LOW settings on microwaves, can flicker, or may not work with the appliance's lighting control circuit. The XPIBE1740 incandescent bulb is fully dimmable and a guaranteed direct match to the original appliance bulb's behavior. If you prefer LED for energy savings, confirm the LED is rated for appliance use, has an E17 base, and is dimmable for microwave applications before substituting.
My LG microwave's bulb says 30W — does this 40W bulb fit?
Physically, yes — both the 30W and 40W bulbs use the same E17 intermediate base and similar T8 shape. However, some LG microwave models specifically call for a 30W bulb (such as the 6912W1Z004B variant). Using a 40W bulb in a socket rated for 30W may cause the bulb to run hotter than designed, shortening its life or the surrounding socket components' life. Check your LG microwave's manual or the marking on the old bulb — if it specifies 30W, use a 30W bulb. The XPIBE1740 is 40W, suitable for the majority of microwaves that specify 40W bulbs.
Why do appliance bulbs burn out faster than regular household bulbs?
Appliance bulbs operate in harsher environments than typical household bulbs — high temperatures (microwaves and range hoods can hit 480°F nearby), heavy vibration from cooking appliances, repeated rapid on-off cycling, and frequent thermal shock from cooking steam. Even though they're rated for 1,000 hours of operation, real-world life in an appliance is often shorter than the same incandescent bulb in a household lamp. Buying multi-packs and replacing when one burns out is a common approach. Always allow the appliance to cool before swapping the bulb, and don't touch the new glass with bare fingers to maximize service life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement bulb built to OEM-equivalent quality standards. It is not a branded GE, Whirlpool, or LG OEM bulb, but is manufactured to match the dimensions (T8, 1" × 2-3/8"), electrical specifications (40W, 125V, E17 base), brightness (400 lumens, warm white), and dimmable performance of the original appliance bulbs it replaces. Bulb spec compatibility (not brand) is what determines fit, so a properly specified aftermarket bulb performs identically to the OEM.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
(4 Pack) 74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
WP4449751 Genuine OEM Whirlpool Oven High Limit Thermostat
The WP4449751 is a Genuine OEM Whirlpool replacement oven high limit thermostat compatible with a wide range of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens, wall ovens, microwave-oven combinations, and ranges. The high limit thermostat is a critical safety device mounted near the oven cavity — it continuously monitors the oven's temperature and cuts off electrical power to the heating element if the oven exceeds its safe operating temperature. When the oven temperature drops back to normal, the thermostat closes and allows normal operation to resume. This backup safety layer protects against fires, damage to the oven, and unsafe cooking conditions when the main temperature control fails.
Rated to trip at approximately 335°F (170°C). Common causes for the high limit thermostat to trip include a faulty control board, cooling fan failure, blocked ventilation, poor door sealing, disrupted air circulation, or an abnormal self-cleaning cycle. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the WP4449751 directly replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, and AH11742549. Installs in 30–45 minutes with basic hand tools by experienced DIYers. This is a safety component in a 240V oven circuit — proceed only if you're comfortable with high-voltage electrical work, or call a qualified appliance technician.
Quick Answer
The WP4449751 Genuine OEM Whirlpool Oven High Limit Thermostat fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and Kenmore ovens with symptoms including oven not heating, oven overheating, uneven heating, oven failing to start, and self-clean door won't unlock after cycle. 335°F (170°C) trip temperature — cuts off power to heating element on overheat, then resets when temperature returns to normal. Genuine OEM. Replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, AH11742549. Compatible with WOS/WOD wall ovens, KOSE/KODE/KOCE series, JJW/JMW/JDRP/JDR series, and many more.
Common Problems This Part Fixes
Oven not heating at all — high limit thermostat tripped open
Oven overheating — thermostat failing to trip when needed (rare failure mode)
Inconsistent oven temperatures leading to undercooked or overcooked food
Oven fails to start when powered on
Oven door won't unlock after a self-cleaning cycle completes
Uneven heating — hot spots or cold spots inside the oven cavity
Oven cuts off heat mid-cycle without reaching set temperature
F-code or thermostat-related error displayed on the control panel
Multimeter continuity test on the thermostat shows an open circuit at room temperature
Visible damage or discoloration on the thermostat housing from a prior overheat event
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This oven high limit thermostat directly replaces the following OEM and cross-reference part numbers:
WP4449751, 4449751, 1550872, AP6009390, AWP47600, EAP2375382, PD00025977, PS11742549
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This high limit thermostat is compatible with select ovens, wall ovens, ranges, and microwave-oven combinations from the following brands:
Whirlpool wall ovens — WOS series (WOS31ES0JS, WOS51EC0AS, WOS51EC0HS, WOS51EC7HW02, WOS51EC7HW21, WOS72EC0HS/HV, WOS72EC7HS/HV, WOS92EC0/EC7 all revisions, WOS97ES0ES series)
Whirlpool double wall ovens — WOD series (WOD51EC0AW03, WOD51EC7HS, WOD93EC7AS)
Whirlpool combination wall ovens — WOC54EC0/EC7 series
KitchenAid wall ovens — KOSE, KODE, and KOCE series (KOSE500ESS, KODE500ESS, KOCE500ESS, KOCE500EBL00/EBL01/EBL02/EBL04/EBL05)
Jenn-Air wall ovens — JJW, JMW, JDRP, and JDR series (JJW2427DB/DS 00/01, JJW2430DS, JJW3430DS, JMW2430DS, JDRP430HL/HM 00/01, JDRP430WP00, JDRP436HL/HM/WP series, JDRP536HL/HM/WP series)
Maytag wall ovens and ranges (select models)
Amana wall ovens (select models — AWO6313SFB00/02, AWO6313SFS00/02, AWO6313SFW00/02)
KitchenAid ranges — KDRS407 series (KDRS407VBK01, KDRS407VBU01, KDRS407VSS00)
Whirlpool ranges — IBD350DS00, IBS300DS00, IBS350DS00 series
Magic Chef, Admiral, Norge, Roper wall ovens (select Whirlpool-built models)
Kenmore / Sears wall ovens (select Whirlpool-built models)
Suitable for single or double electric wall ovens and microwave-oven combination units
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance
High limit thermostat (safety switch) — cuts off power to the oven's heating element when temperature exceeds 335°F (170°C) to prevent overheating damage or fire
Auto-reset design — closes and restores normal operation when the oven temperature returns to safe range
Precision-calibrated to Whirlpool factory specifications for accurate trip temperature and reliable safety response
One-year Whirlpool warranty on Genuine OEM parts
Replaces 4449751, 1550872, AP6009390, AH2375382, EA2375382, PS2375382, PS11742549, EAP11742549, and AH11742549
Compatible with Whirlpool WOS/WOD/WOC series, KitchenAid KOSE/KODE/KOCE series, Jenn-Air JJW/JMW/JDRP/JDR series, plus Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens
Fits single wall ovens, double wall ovens, ranges, and microwave-oven combination units
Resolves "oven won't heat," "overheating," "uneven heating," "self-clean door stuck locked," and "won't start" symptoms when caused by a failed high limit thermostat
For experienced DIYers or qualified appliance technicians — this is a safety component in a 240V oven circuit
Installation typically takes 30–45 minutes with basic hand tools
Product Specifications
Part Number
WP4449751
Part Type
Oven High Limit Thermostat (Safety Switch)
Condition
Genuine OEM
Application
Wall Ovens, Ranges, Microwave-Oven Combinations (Whirlpool platform)
Trip Temperature
335°F (170°C)
Type
Auto-Reset (closes when temperature returns to safe range)
Warranty
One-Year Whirlpool Warranty (Genuine OEM)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Turn Off Power at Breaker Before Starting — This Is a 240V Oven Circuit — Wear Work Gloves Disconnect power at the household breaker before beginning — this is a 240V circuit and there is a serious risk of electrical shock if power is not fully disconnected. Verify power is off with a voltage tester before touching any wiring. Wear work gloves and safety glasses. Allow the oven to cool completely before beginning (several hours after any recent cooking). The high limit thermostat is typically mounted on the rear or side of the oven cavity, accessed by removing the back panel of the appliance (for freestanding ranges) or the front trim/service panel (for wall ovens). The exact location varies by model — consult your appliance's service diagram before starting. Photograph all wire connections and mounting details before disconnecting anything. Disconnect the wire terminals from the old thermostat (typically two spade-terminal wires). Remove the mounting screws or clips holding the thermostat to the oven cavity, and lift it out. Install the new WP4449751 in the exact same position and orientation — the thermostat must be in good thermal contact with the oven cavity to function correctly. Secure the mounting hardware and reconnect the wires to their correct terminals. Reinstall the access panels. Restore power at the breaker and test the oven — start with a low-temperature bake cycle to confirm normal heating operation before running a high-temperature or self-clean cycle. Tools needed: Phillips screwdriver, 1/4" nut driver, voltage tester (essential), work gloves, safety glasses.
Frequently Asked Questions
Why did my high limit thermostat trip in the first place?
A high limit thermostat trips because the oven exceeded its safe operating temperature — meaning something upstream in the temperature control chain failed to shut off the heating element when it should have. Common causes are: a failed oven control board (relay stuck closed), a failed cooling fan (allowing the oven cavity or electronics to overheat), blocked or restricted ventilation, poor door sealing (letting the cavity overheat), disrupted air circulation, or an abnormal self-cleaning cycle. Before installing the new thermostat, investigate and address the underlying cause — otherwise the new thermostat will trip again in short order. Also inspect the ventilation, oven door gasket, and cooling fan while you have the appliance open.
What's the difference between a high limit thermostat and the operating thermostat?
These are two different components serving two different roles. The operating thermostat (or the oven control board with its temperature sensor) is the primary component that maintains the oven at your set temperature by cycling the heating element on and off during normal operation — it opens and closes at your selected temperature (e.g., 350°F). The high limit thermostat (WP4449751) is a backup safety device that only trips when the oven temperature far exceeds normal operation (335°F over the cavity's safe threshold), typically because the operating thermostat or control has failed. If the high limit thermostat trips, both need to be checked — the operating thermostat may also need replacement.
Does the high limit thermostat reset itself, or does it need to be replaced after tripping?
The WP4449751 is an auto-reset thermostat — it closes automatically once the oven cools back to a safe temperature, allowing normal operation to resume. If your oven is heating normally again after cooling, the thermostat is likely still functional (the underlying overheating cause needs investigation). However, if the thermostat has failed permanently open — often the result of repeated overheat events or age — it will need replacement. Test with a multimeter set to continuity: a working thermostat shows continuity at room temperature. If it reads open (infinite resistance) when cold, it has failed and needs replacement.
Why does my self-cleaning cycle leave the oven door locked and the oven won't heat?
This is a classic symptom of a high limit thermostat that tripped during the self-clean cycle. Self-cleaning cycles run at extreme temperatures (800–1000°F) and stress every component in the oven — if the ventilation, door gasket, or cooling fan can't keep up, the high limit thermostat will trip open. Once tripped, the oven can't heat OR unlock the self-clean door lock mechanism, leaving the door stuck closed. Once the thermostat cools and closes (or is replaced), the door lock releases and normal operation resumes. If self-clean cycles routinely trip the thermostat, investigate whether the ventilation, cooling fan, or door gasket are causing the problem.
Can I do this repair myself, or should I hire a technician?
Replacing an oven high limit thermostat is a manageable DIY repair for someone comfortable with mechanical work and electrical connections, but this is a 240V circuit and the thermostat is a safety component — any error can create a serious safety risk. If you have experience with appliance repair, follow the safety precautions carefully (breaker off, voltage tester, correct thermostat orientation), and can confirm the wiring connections are secure, this is a feasible DIY. If you've never worked with 240V appliance circuits before, hiring a qualified appliance technician is the safer option. Also identify and address whatever caused the original overheat event — otherwise the new thermostat will trip again.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same high limit thermostat installed in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ovens from the factory — guaranteed fit, materials, and performance. Backed by Whirlpool's one-year warranty on Genuine OEM parts.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WB27X11213CM Microwave Fan Thermostat
Closes at 158°F, Opens at 104°F.
Fits GE Microwaves.
Replaces Part Numbers:WB27X11213, WB24X28950, WB27X10846, SE-7350-004, AP5791057, PS8754628.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO 279393 Dryer Terminal Block Screw Kit
The XPARTCO 279393 is an aftermarket replacement terminal block screw kit compatible with a wide range of Whirlpool-family electric dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef, and Norge. The terminal block screws secure the dryer power cord wires to the terminal block — the connection point where 240V power enters the dryer. Loose, corroded, or damaged screws at this connection can cause intermittent power loss, blown fuses, tripped breakers, or dangerous arcing.
This kit includes 3 chrome-plated screws and 3 nuts — everything needed to restore a secure, conductive connection at the terminal block. The chrome plating improves electrical conductivity and corrosion resistance. Screws measure 7/16" L x 7/16" W x 11/16" H; nuts measure 1/2" L x 1/2" W x 1/8" H. Installs in under 15 minutes with basic hand tools.
Quick Answer
The XPARTCO 279393 Terminal Block Screw Kit fixes electric dryers with intermittent power, blown fuses, tripped circuit breakers, hot terminals, or visible arcing and scorching at the power cord connection. Includes 3 chrome-plated screws and 3 nuts. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, and more.
Common Problems This Part Fixes
Dryer has intermittent power or will not start at all
Internal fuses repeatedly blowing without another clear cause
Circuit breaker for the dryer repeatedly tripping
Terminal block area is hot to the touch during or after operation
Visible arcing, sparks, scorch marks, or smoke around the terminal block cover
Heating element or motor works intermittently but not consistently
Dryer power cord connection is loose, corroded, or visibly damaged
Replaces Part Numbers
This terminal block screw kit directly replaces the following OEM and cross-reference part numbers:
279393, 279393D, 279393VP, 3184, EAP334188, AWP39844, PD00003883, AH334188, EA334188, AP3020386, PS334188
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This terminal block screw kit is compatible with select electric dryers from the following brands:
Whirlpool electric dryers
Kenmore / Sears electric dryers (Whirlpool-built models)
Maytag electric dryers
KitchenAid electric dryers
Amana electric dryers
Roper electric dryers
Admiral electric dryers
Estate electric dryers
Crosley electric dryers
Inglis electric dryers
Magic Chef, Norge, and Jenn-Air electric dryers
Note: This kit is for electric dryers only. Gas dryers do not use a terminal block for power cord connections.
Key Features
Secures the dryer power cord wires to the terminal block for a safe, reliable 240V connection
Kit includes 3 screws and 3 nuts — one complete set for all three terminal positions
Chrome-plated metal construction — improves electrical conductivity and resists corrosion
Screw dimensions: 7/16" L x 7/16" W x 11/16" H; Nut dimensions: 1/2" L x 1/2" W x 1/8" H
Direct replacement for OEM part numbers 279393, 279393D, and 279393VP — no modification required
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, and more
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in under 15 minutes with basic hand tools
Product Specifications
Part Number
279393
Part Type
Terminal Block Screw and Nut Kit
Condition
Aftermarket Replacement
Application
Electric Dryers (240V terminal block)
Kit Contents
3 chrome-plated screws and 3 nuts
Screw Dimensions
7/16" L x 7/16" W x 11/16" H
Nut Dimensions
1/2" L x 1/2" W x 1/8" H
Material
Chrome-plated metal
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef, Norge, Jenn-Air
Dryer Type
Electric dryers only
⚠️ Electrical Safety Warning This kit connects the power cord to the dryer's terminal block — a high-voltage connection carrying 240V. Always unplug the dryer and shut off the circuit breaker before beginning installation. Loose or improperly tightened terminal screws can cause arcing, overheating, blown fuses, or fire. If you are not comfortable working with high-voltage electrical connections, have this part installed by a qualified appliance technician.
Installation Notes
⚠️ Unplug and Switch Off Breaker Before Starting Unplug the dryer from the wall outlet and turn off the circuit breaker for the dryer before beginning any work on the terminal block. Locate the terminal block cover plate on the back of the dryer and remove it by unscrewing the retaining screw. Use needle-nose pliers to carefully disconnect the power cord wires from the terminal block. Remove the old screws and nuts using a Phillips or flat-head screwdriver. Install the new 279393 screws and nuts into the terminal block. Reconnect the power cord wires to the correct terminals — refer to the label inside the terminal block cover or your dryer's wiring diagram to confirm wire positions. Tighten all screws firmly but do not overtighten. Replace the terminal block cover plate. Restore power and run a test cycle to verify correct operation. Tip: While the cover is off, inspect the terminal block itself (part 694431) for burn marks or damage. If the block is damaged, replace it before reinstalling. Tools needed: Phillips screwdriver, flat-head screwdriver, needle-nose pliers.
Frequently Asked Questions
What is the terminal block screw kit used for?
The terminal block screw kit secures the three wires of the dryer's power cord (two hots and a neutral, or two hots and a ground depending on cord type) to the terminal block at the back of the dryer. This is the point where 240V power enters the machine. The screws must be firmly tightened to maintain a safe, low-resistance electrical connection. If they loosen or corrode over time, resistance increases at the connection — causing heat, arcing, blown fuses, or power loss.
Can I also use this kit when installing a new dryer power cord?
Yes — this kit is commonly needed when installing a new 3-wire or 4-wire dryer power cord. When switching from a 3-wire to 4-wire cord (or vice versa), the terminal block screws and nuts often need to be loosened and retightened, and replacing them with a fresh set ensures a secure, corrosion-free connection from the start.
Should I also inspect the terminal block itself?
Yes. While the terminal block cover is off, inspect the block itself (part 694431) for burn marks, melted plastic, or damaged terminals. If the block shows any of these signs, it should be replaced before reinstalling — new screws alone cannot fix a damaged terminal block. Contact our support team to find the correct terminal block for your model.
Does this kit work for gas dryers?
No. Gas dryers use a standard 120V three-prong household plug and do not have a terminal block for power cord connections. The 279393 kit is for electric dryers only, which use a 240V outlet and require a hard-wired terminal block connection for the power cord.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from chrome-plated metal to match the dimensions and electrical performance of the original 279393 screw kit.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 675813 Dishwasher Thermal Fuse
The XPARTCO 675813 is an aftermarket replacement bimetal thermal fuse (TCO — thermal cut-off) kit compatible with a wide range of Whirlpool-family dishwashers including Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, and Admiral. The thermal fuse is a one-time safety device located on or near the control board that monitors internal temperature. If the dishwasher overheats — due to a blocked vent, malfunctioning heating element, or other fault — the fuse permanently interrupts power to protect the dishwasher and prevent fire hazards.
Unlike a resettable thermostat, a blown thermal fuse must be replaced. Once it trips, the dishwasher will show no power and will not start. The kit includes one thermal cutoff fuse with a 2-wire harness (leads extending approximately 18 inches from the fuse), one zip tie, and installation instructions. The fuse body measures 1-1/16" L x 1" W x 7/16" H. The new wiring harness must always be used when replacing the fuse. Installs in 5–15 minutes with basic hand tools.
Quick Answer
The XPARTCO 675813 Dishwasher Thermal Fuse Kit fixes Whirlpool-family dishwashers that show no power, won't start, have a blank control panel, or stopped mid-cycle with no response. The thermal fuse permanently trips when the dishwasher overheats and must be replaced. Kit includes fuse with 2-wire harness, zip tie, and instructions. Fuse body 1-1/16" L x 1" W x 7/16" H. Always install using the new harness included. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, and more.
Common Problems This Part Fixes
Dishwasher completely dead — no power, no lights, no response when buttons are pressed
Control panel blank with no indicator lights or display
Dishwasher stopped mid-cycle and will not restart
Dishwasher will not start despite the door being closed and latched
No sounds when attempting to start the dishwasher
Dishwasher behaves as if it has no power even though the outlet is live
Replaces Part Numbers
This dishwasher thermal fuse kit directly replaces the following OEM and cross-reference part numbers:
675813, 3375557, 3376359, 675813VP, 679723, AH382828, OEM9345567, AWP39651 PD00002439, EA382828, EAP382828, AP3115186, PS382828.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermal fuse kit is compatible with select dishwashers from the following brands:
Whirlpool dishwashers
Kenmore / Sears dishwashers (Whirlpool-built models)
KitchenAid dishwashers
Maytag dishwashers
Estate dishwashers
Crosley dishwashers
Inglis dishwashers
Roper dishwashers
Admiral dishwashers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Bimetal thermal cut-off (TCO) fuse — permanently interrupts power if the dishwasher overheats, protecting against fire hazard
One-time safety device — once tripped, the fuse must be replaced (it does not reset)
Rated at 98°C — trips when internal temperature exceeds the safe operating limit
Fuse body dimensions: 1-1/16" L x 1" W x 7/16" H; leads extend approximately 18" from fuse
Kit includes thermal fuse with 2-wire harness, zip tie, and installation instructions
Always install using the new harness included — never reuse the old harness
Metal and plastic construction — reliable performance and heat resistance
Direct replacement for 675813, 675813VP, 3375557, and 3376359 — no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 5–15 minutes with basic hand tools
Product Specifications
Part Number
675813
Part Type
Dishwasher Thermal Fuse / Thermal Cut-Off (TCO) Kit
Condition
Aftermarket Replacement
Fuse Type
Bimetal thermal cut-off (one-time, non-resettable)
Trip Temperature
98°C (208°F)
Fuse Body Dimensions
1-1/16" L x 1" W x 7/16" H
Lead Length
Approximately 18 inches from fuse body
Color
White / Brown
Material
Metal / Plastic
Kit Includes
Thermal cutoff fuse with 2-wire harness, zip tie, instructions
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug or Switch Off Breaker Before Starting Unplug the dishwasher or turn off the circuit breaker before beginning any repair. The thermal fuse is located inside the dishwasher door panel near the control board. Open the dishwasher door and remove all screws from the inner door panel — a Torx bit is typically required on Whirlpool-family models. Carefully lift the inner door panel to expose the control board housing. Remove the black plastic cover over the control board to access the thermal fuse — it is typically on the right side of the board with one wire connected to each terminal. Test the old fuse with a multimeter for continuity (no continuity confirms the fuse has blown). Disconnect the old fuse and its harness. Connect the new 675813 fuse using the new 2-wire harness included in the kit — do not reuse the old harness. Secure the harness with the included zip tie. Reinstall the control board cover, inner door panel, and all screws. Restore power and run a test cycle. Note: If the fuse blows again after replacement, an underlying cause such as a blocked vent, failed heating element, or faulty control board should be diagnosed before replacing the fuse a second time. Tools needed: Torx screwdriver (T15 or T20), Phillips screwdriver, multimeter, work gloves.
Frequently Asked Questions
What does the dishwasher thermal fuse do?
The thermal fuse is a one-time safety device that monitors the internal temperature of the dishwasher. If the temperature rises above the safe operating limit — 98°C in this case — the fuse permanently interrupts the electrical circuit, cutting all power to the dishwasher. This protects both the appliance and your home from fire hazard caused by overheating. Unlike a resettable thermostat, a blown thermal fuse cannot be reset and must be physically replaced.
How do I know if my thermal fuse has blown?
The most obvious sign is a completely dead dishwasher — no lights, no sounds, and no response when you press any buttons, even though the outlet has power. You can confirm a blown fuse with a multimeter: disconnect the fuse from the harness and test for continuity across its two terminals. A working fuse will show continuity (near-zero resistance); a blown fuse will show no continuity (open circuit). If the fuse tests bad, replace it with the 675813 kit.
Why did my thermal fuse blow, and will it happen again?
Thermal fuses blow when the dishwasher overheats. Common causes include a blocked air vent, a malfunctioning or shorted heating element, a failed thermostat, or an electrical fault in the control board. If you simply replace the fuse without addressing the root cause, it may blow again. After replacing the fuse, run the dishwasher and monitor for any unusual heat, steam, or burning smell. If the fuse blows again, have the underlying fault diagnosed before ordering another replacement.
Why must I use the new harness and not the old one?
When a thermal fuse blows, the wiring harness connected to it may have been exposed to the same overheating event that tripped the fuse. The wires or connectors may have degraded or partially melted even if they appear intact. Using the old harness risks a poor connection or a recurring fault. Always install the new 2-wire harness included in the kit to ensure a reliable, safe connection.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, trip temperature, and performance of the original 675813 thermal fuse.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 330031 Surface Burner Receptacle Kit
The XPARTCO 330031 is an aftermarket replacement surface burner receptacle kit, also called a surface element receptacle or terminal block kit, for Whirlpool-built electric ranges and cooktops. The receptacle is the plug-in block that connects the range's wire harness to the surface element. When it burns, loosens, or corrodes, the element can heat poorly, heat intermittently, or stop heating entirely, even though the element itself is good.
This kit is a direct-fit aftermarket replacement for the Whirlpool 330031 and the many older numbers that it replaces. If a burner has stopped working, test the element in another burner socket first. If the element works there, the receptacle is the likely cause.
Quick Answer
The XPARTCO 330031 Receptacle Kit fixes an electric range or cooktop whose surface element won't heat, heats intermittently, or has a burned or damaged socket. Classic symptom: a known-good element works in another burner socket but not in this one.
Common Problems This Part Fixes
Surface element will not heat
Element heats intermittently
Burned, melted, or corroded receptacle block
Loose element that doesn't seat firmly in the socket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This receptacle kit directly replaces the following part numbers:
330031, AP3075808, W10841094, 14200040, 14200233, 14203070, 14205001, 14205727, 14209631, 14210007, 14254131, 3374, 42147, 42153, 4335480, 5303935058, 550226, 71930, 74-06-132, 74-06-190, 766339, 99989649, 9E28000199, AH340571, EA340571, FSP330031, PS340571, R0157526, R0167091, R300, TS300, W10116799, W10116803, WB17X210, Y0042147, Y0042153, Y0045536, Y0045546, Y0051088, Y0054794, Y0067069, Y0071930, Y0071931, Y0075054, Y0086726, Y0088866, Y0089227, Y0089291, Y0089336, Y0090094, Y0300678, Y0308306, Y89336, YC2711501, YC2716501, YR0181149, 5303935058, 5301167733, 08002879, 08002916, 08002917, 08002918, 08002919, 08008697, 08011962, 08012830, 08012865, 09957075, 12871, 318112500, 318366400, 42822, 53-003, 709T026P01, 709T026S01, 709T026S02, 709T034P01, 709T045P01, 868464, 9175, A1505240, A1505979, G54972, G55667, K001167470, K001315483, K001319226, K1167204, K1167205, K1167470, K1310415, K1311332, K1312169, K1312179, K1312800, K1315200, K1315483, K1319226, K1323982, K5043104, K5043105, K5137801, PS470125, R201A, RR104, RR109, RR110, RR117, S5303310284, AP2591744, WB17X5091, AP2021538, 245919, AH232634, EA232634, PS232634, R117
These are the main numbers that appear across retailer cross-reference lists. Retailers list many more older numbers for this kit. Confirm against your range's parts diagram, or contact our support team, if your range calls out a different number.
Compatibility
This receptacle kit is listed for electric Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, including these Kenmore examples:
Kenmore 101936630, 101936634, 101938630, 101938635
Kenmore 119647811, 119648811, 119900871, 119901871
Note: The models above are a small sample of a longer list, not a full list. Receptacle styles differ between ranges, and some buyers report terminals that differ from their original. Compare this kit to your old receptacle, and contact our support team with your model number to verify fit before ordering.
Key Features
Direct-fit aftermarket receptacle kit for the 330031 surface element receptacle
Connects the range's wire harness to the surface element
Kit includes the receptacle block, mounting brackets, high-temperature wire leads, and heat-shrink insulation
Resolves no-heat and intermittent-heat problems caused by a burned receptacle
Typically a 15 to 30 minute repair
Product Specifications
Part Number
XP330031
OEM Part Number
330031
Part Type
Surface Burner (Element) Receptacle Kit
Condition
Aftermarket Replacement
Quantity
1 kit
Application
Electric Ranges & Cooktops
Installation Notes
⚠️ Unplug Power Before Installing Unplug the range or switch off its circuit breaker before beginning, and wear work gloves. Remove the surface element and drip pan, lift the range top, and note which wire goes to which terminal before disconnecting them. Unscrew the old receptacle, fit the new one with the bracket that matches your receptacle, and attach the wires to the same terminals. Insulate the connections with the heat-shrink supplied, then reassemble and test.
Frequently Asked Questions
One burner won't heat. Is this the part I need?
Try the element in another burner socket first. If it heats there, the receptacle or its wiring is the likely cause, and this kit is the repair. If it doesn't heat in the other socket, the element is the problem.
The kit comes with two brackets. Which one do I use?
Use only the bracket that matches your receptacle, as shown in the parts diagram or on your old receptacle.
Is this a plug-in part for any electric range?
No. It is listed for Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, and receptacle styles differ between models. We have not confirmed fit for GE, Hotpoint, or other brands. Compare it to your old receptacle, or contact our support team with your model number.
Will this fit my range?
It is listed for many Whirlpool-built ranges and cooktops, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
LCR5X440 HVAC OVAL MOTOR RUN CAPACITOR
Engineered by an ISO manufacturer with over twenty years' experience in OEM capacitor fabrication, Linebacker® capacitors are manufactured by the OEM factory and are 100% in-line production tested to the same rigorous standards.
Features/Benefits
10,000 AFC pressure sensitive short circuit interrupting capability
3-year warranty from the date of purchase
Continuous life tested, oil leak tested and dielectric tested for insulation effectiveness
Life tested to 85° C operating temperature for 10,000 cycles
Manufactured with thick polypropylene foil to handle increased operating temperatures
Meets EIA-456A accelerated life test at 70° C for 60,000 hours
PCB-free oil to prevent over-heating
UL File # E352486
US and Canada UL approved (C22.2NO.190)
Applications
Air conditioning compressors
Refrigeration Compressors
Furnace blower motors
Condenser fan motors
Specification:
Voltage:
Up to 440 VAC
Operating Temperature:
-40°F to 185°F (-40°C to 85°C)
Foil Thickness:
6.0 µm +/- 5%
Standard Tolerance:
+/- 5%
MFD Value:
5
Style:
Oval
Size:
2.03x1.24x1.57
Choice W10898291 Range Spark Module (Board)
Direct spark ignition module.
Fits specific Maytag, Kenmore, Whirlpool gas range models
Replaces Part Numbers: W10898291, W10818365, AP6034131, PS11765825.
Description: This Spark Module is a replacement part for specific Maytag, Kenmore, Whirlpool gas range models. Located underneath each sealed burner bowl, it generates the high voltage spark needed for reliable ignition of surface flames.
Key Features:
✅ Replaces: W10898291, W10818365, AP6034131, PS11765825.
✅ Fits brands: Whirlpool, Maytag, Kenmore, Amana & more
✅ Ensures lid locks properly during operation
✅ Direct-fit, plug-and-play installation
⚠️ Always disconnect power before installation. Contact us to confirm fit for your washer model.
📦 Part Number: W10898291CM💯 30-Day Money Back Guarantee
This is an aftermarket part that can be used as a replacement for the OEM part.
(4 Pack) XPARTCO 330031 Surface Burner Receptacle Kit
The XPARTCO 330031 is a pack of 4 aftermarket replacement surface burner receptacle kits, also called surface element receptacles or terminal block kits, for Whirlpool-built electric ranges and cooktops. Each receptacle is the plug-in block that connects the range's wire harness to the surface element. When it burns, loosens, or corrodes, the element can heat poorly, heat intermittently, or stop heating entirely, even though the element itself is good.
These kits are direct-fit aftermarket replacements for the Whirlpool 330031 and the many older numbers that it replaces. A 4-pack covers every burner on a standard four-burner range. If a burner has stopped working, test the element in another burner socket first. If the element works there, the receptacle is the likely cause.
Quick Answer
The (4 Pack) XPARTCO 330031 Receptacle Kit fixes an electric range or cooktop whose surface element won't heat, heats intermittently, or has a burned or damaged socket. Classic symptom: a known-good element works in another burner socket but not in this one.
Common Problems This Part Fixes
Surface element will not heat
Element heats intermittently
Burned, melted, or corroded receptacle block
Loose element that doesn't seat firmly in the socket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
These receptacle kits directly replace the following part numbers:
330031, 330031A, 12001673, 0089336, B5015402, C2711501, C2716501, M5D117, M5D71, R0157519, R0157526, R0157932, R0167091, R0167117, W10116799, W10116803, WB17X210, RR110
These are the main numbers that appear across retailer cross-reference lists. Retailers list many more older numbers for this kit. Confirm against your range's parts diagram, or contact our support team, if your range calls out a different number.
Compatibility
These receptacle kits are listed for electric Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, including these Kenmore examples:
Kenmore 101936630, 101936634, 101938630, 101938635
Kenmore 119647811, 119648811, 119900871, 119901871
Note: The models above are a small sample of a longer list, not a full list. Receptacle styles differ between ranges, and some buyers report terminals that differ from their original. Compare the kit to your old receptacle, and contact our support team with your model number to verify fit before ordering.
Key Features
Pack of 4 direct-fit aftermarket receptacle kits for the 330031 surface element receptacle
Connects the range's wire harness to the surface element
Each kit includes the receptacle block, mounting brackets, high-temperature wire leads, and heat-shrink insulation
Resolves no-heat and intermittent-heat problems caused by a burned receptacle
Typically a 15 to 30 minute repair per burner
Product Specifications
Part Number
XP330031
OEM Part Number
330031
Part Type
Surface Burner (Element) Receptacle Kit
Condition
Aftermarket Replacement
Quantity
4 Kits
Application
Electric Ranges & Cooktops
Installation Notes
⚠️ Unplug Power Before Installing
Unplug the range or switch off its circuit breaker before beginning, and wear work gloves. Remove the surface element and drip pan, lift the range top, and note which wire goes to which terminal before disconnecting them. Unscrew the old receptacle, fit the new one with the bracket that matches your receptacle, and attach the wires to the same terminals. Insulate the connections with the heat-shrink supplied, then reassemble and test.
Frequently Asked Questions
One burner won't heat. Is this the part I need?
Try the element in another burner socket first. If it heats there, the receptacle or its wiring is the likely cause, and this kit is the repair. If it doesn't heat in the other socket, the element is the problem.
The kit comes with two brackets. Which one do I use?
Use only the bracket that matches your receptacle, as shown in the parts diagram or on your old receptacle.
Is this a plug-in part for any electric range?
No. It is listed for Whirlpool, Amana, Roper, and Kenmore ranges and cooktops, and receptacle styles differ between models. We have not confirmed fit for GE, Hotpoint, or other brands. Compare it to your old receptacle, or contact our support team with your model number.
How many kits come in this order?
Each order includes 4 receptacle kits.
Will this fit my range?
It is listed for many Whirlpool-built ranges and cooktops, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping
✓ Quality Aftermarket Parts
✓ Compatibility Support
✓ Secure Checkout
