5304523741 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators
Product Description
Keep your refrigerator cooling efficiently with the 5304523741 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved replacement circulates cold air from the evaporator throughout the refrigerator and freezer compartments. A failing fan motor can cause uneven temperatures, frost buildup, or warm sections in your fridge. Installing this genuine OEM part ensures quiet, dependable air circulation and consistent cooling performance.
Replaces Part Numbers
5304523741, AP6983831, EAP12746805, 4960926, PD00067011, PS12746805.
Compatibility
This genuine OEM fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators.
Example compatible models include (but are not limited to): Frigidaire FFSS2615TS0, Electrolux LFHB2751TF, and Kenmore 253.70313214.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Replacement – Factory-approved motor for reliable cooling performance
❄️ Efficient Air Circulation – Distributes cold air evenly throughout the compartments
💰 Energy-Efficient Operation – Restores temperature consistency and reduces compressor strain
🛠️ DIY Friendly – Direct-fit replacement installs in minutes
🛡️ Fixes Common Issues – Solves warm freezer, frost buildup, or noisy fan motor problems
📐 Product Specification
Part Number: 5304523741
Component Type: Refrigerator Evaporator Fan Motor
Material: Metal and high-temperature plastic housing
Mounting: Direct-fit replacement in freezer compartment
Operating Conditions: Designed for continuous low-temperature operation
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock.
Steps:
Disconnect power and remove freezer shelves and back panel.
Locate and disconnect the wiring harness from the old fan motor.
Remove mounting screws and take out the old motor and fan blade.
Transfer the fan blade (if required) to the new 5304523741 motor.
Mount the new motor, reconnect wiring, and reinstall back panel.
Restore power and confirm even cooling and quiet operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🧊 Genuine OEM Replacement Part
🔄 30-Day Return Policy
Keep your refrigerator running at peak performance — Add to Cart Now for a genuine, factory-approved repair!
XPARTCO 2315549 Refrigerator Evaporator Fan Motor Replaces WP2315549
The XPARTCO 2315549 is an aftermarket replacement evaporator fan motor for Whirlpool-built side-by-side refrigerators, located in the freezer section. This small motor pulls cold air off the evaporator coil and pushes it through the duct system to both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer, being closest to the coil, may hold up reasonably well for a while, but the fresh food compartment depends entirely on ducted airflow and drifts warmer and warmer as circulation weakens or stops.
This motor ships complete with its wiring harness, so nothing needs to be spliced or transferred from the old unit. Common failure modes include worn motor bearings that let the blade wobble or bind, ice buildup on the coil that jams the blade, and electrical failure of the motor windings. A simple way to check before ordering: with the refrigerator unplugged, try turning the fan blade by hand — it should spin freely with no grinding or resistance. It directly replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362.
Quick Answer
The XPARTCO 2315549 Refrigerator Evaporator Fan Motor fixes Whirlpool-built side-by-side refrigerators with uneven cooling between compartments, frost buildup on the evaporator coil, unusual humming or buzzing noise, or a fresh food section that runs warmer than the freezer. Includes wiring harness. Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, EAP11740362. Double-check the part number carefully — this is a different motor from our similarly numbered 2315539 listing, and the two are easy to mix up.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating on or around the evaporator coil
Unusual humming, buzzing, or grinding noise coming from inside the freezer
Noise that stops when the freezer door is opened and starts again once it's closed
Refrigerator running constantly as the compressor tries to compensate for poor circulation
Fan blade that doesn't spin freely, or spins with noticeable resistance, when checked by hand
Fridge section too warm or too cold, freezer section too warm or too cold
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
2315549, WP2315549, 2220569, 1193008, AP6007250, AWP47338, PD00002704, PS11740362, EAP11740362, ESF-U2A
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Whirlpool-built side-by-side refrigerators across the Whirlpool family of brands, including:
Whirlpool side-by-side refrigerators
Maytag, Amana, and KitchenAid refrigerators (select Whirlpool-built models)
Jenn-Air, Admiral, Norge, and Roper refrigerators (select models)
Inglis refrigerators (select models)
Select Kenmore and Ikea refrigerators built on the Whirlpool platform
Verified model numbers include: 7GS2FHAXTA02, 7GS5FHAXTA00, ED2DHEXWB00, and ED2DHEXWL00.
Note — easy to confuse with 2315539: This part is 2315549, production number ESF-U2A. It is a separate, distinct motor from our 2315539 listing (production number ESF-U2B, replacing 2219689, 2225625, and W10438708), which serves a different set of models. The two part numbers differ by only a single transposed digit and are frequently mistyped or mixed up when ordering — double-check your old motor's part number or your appliance's full model number carefully before ordering. Contact our support team with your model number if you're unsure which motor you need.
Key Features
Aftermarket replacement evaporator fan motor with wiring harness included — nothing to splice or transfer
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "humming or buzzing noise" symptoms caused by fan motor failure
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WP2315549, 2220569, 1193008, AP6007250, PS11740362, and EAP11740362
Compatible with Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, and select Kenmore refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward DIY repair — typically 15 to 30 minutes
Product Specifications
Part Number
2315549
OEM Part Number
WP2315549
Production Number
ESF-U2A
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Whirlpool
Location
Freezer section, behind the rear panel near the evaporator coil
Kit Contents
Fan motor with wiring harness
Application
Side-by-Side Refrigerators
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Norge, Roper, Inglis, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and move all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing — ice can be masking the actual failure and can make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new 2315549 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How is this different from your 2315539 listing? The numbers look almost identical.
They are genuinely different motors that happen to have nearly identical part numbers — 2315549 versus 2315539, just one transposed digit. This 2315549 motor carries production number ESF-U2A and replaces WP2315549, 2220569, and 1193008. Our separate 2315539 listing carries production number ESF-U2B and replaces a different set of numbers (2219689, 2225625, W10438708) for a different group of models. Because the numbers are so easy to mix up, we'd strongly recommend double-checking the exact number on your old motor, or your full refrigerator model number, before ordering either one.
My freezer seems fine but the fresh food section is warm. Is this the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area.
How can I test the motor before ordering a replacement?
With the refrigerator unplugged and the rear freezer panel removed, try turning the fan blade by hand. It should spin freely and smoothly with no grinding, binding, or resistance. If it doesn't turn freely, or doesn't turn at all, the motor has very likely failed. Also listen for humming or buzzing while the refrigerator is running — a motor trying and failing to turn often makes noise without actually moving air.
There's a lot of frost around the fan and coil. Should I address that first?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed, ice-bound blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before installing the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the mounting, wiring harness configuration, and airflow performance of the original WP2315549 evaporator fan motor used in compatible Whirlpool-built side-by-side refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X10209 (OE) Refrigerator Condenser Fan Motor
The WR60X10209 is an OE (Original Equipment) DC condenser fan motor for GE refrigerators. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air across the condenser coils to help dissipate heat from the hot refrigerant before it moves on to the evaporator, keeping the compressor from overheating and the whole system running efficiently.
Rated 11.3V DC, 2.2W, with a 4-pin plastic plug carrying 4 wires (white, blue, red, and yellow). The motor shaft measures 1/8" in diameter and 2-7/8" long. Common failure causes include worn motor bearings, dirty or obstructed condenser coils forcing the motor to work harder than intended, and general electrical wear. Symptoms include increased noise when the freezer door is opened, warm temperatures inside the refrigerator, and — left unaddressed — compressor overheating and food spoilage from a refrigerator that can no longer maintain temperature. It directly replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567.
Quick Answer
The WR60X10209 (OE) Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and select Kenmore refrigerators with increased noise near the compressor compartment, warm temperatures inside the fridge, or early signs of compressor overheating. 11.3V DC, 2.2W, 4-pin/4-wire plug, 1/8" x 2-7/8" shaft. Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, PS1483567. This is the 12V DC condenser fan — if your refrigerator needs a 120V motor, see our WR60X10220 listing instead.
Common Problems This Part Fixes
Increased noise near the compressor compartment or when the freezer door is opened
Warm temperatures inside the refrigerator
Refrigerator running constantly as it struggles to maintain temperature
Compressor overheating from restricted airflow around the condenser coils
Food spoilage from a refrigerator that can't hold a consistent temperature
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
What Is an OE Part?
OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10209, 1195784, WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, 045900390950, 197D2407P013, AGE29194, AH1483567, EA1483567, EAP1483567, AP4265957, PD00001176, PS1483567.
The motor's own sticker also references production number 197D2407P013. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select RCA and Kenmore refrigerators built on the GE platform.
Note — 12V DC, not 120V: This is the 12V DC condenser fan motor. If your refrigerator calls for a 120V motor instead, you need our WR60X10220 listing. This is also a condenser fan (cools the compressor and condenser coils), not an evaporator fan (circulates cold air to the food compartments) — a different part from our WR60X10074, WR60X10185, and WR60X10318 evaporator fan motor listings. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
OE (Original Equipment) condenser fan motor — draws air across the condenser coils to cool the refrigerant and compressor
Resolves "noise near the compressor," "warm fridge temperatures," and "compressor overheating" symptoms caused by fan failure
Rated 11.3V DC, 2.2W
4-pin plastic plug with 4 wires (white, blue, red, yellow)
1/8" diameter x 2-7/8" long shaft
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WR60X10042, WR60X10053, WR60X10065, WR60X10080, WR60X10081, WR60X10155, WR60X10216, WR60X24483, AP4265957, and PS1483567
Compatible with GE, Hotpoint, RCA, and select Kenmore refrigerators
Product Specifications
Part Number
WR60X10209
Designation
OE (Original Equipment)
Part Type
Refrigerator DC Condenser Fan Motor
Brand
GE
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor
Voltage
11.3V DC
Wattage
2.2 W
Connector
4-pin plastic plug, 4-wire (white, blue, red, yellow)
Shaft
1/8" diameter x 2-7/8" long
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, RCA, Kenmore
Installation Notes
⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair.
⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the 4-pin plug from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR60X10209 in the same position, reconnect the 4-pin plug fully, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
Why is there a fire/explosion warning on this part?
Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components like fan motors sit near refrigerant lines and can be a source of ignition if a leak were ever present, which is why GE specifically requires an authorized, correctly rated service part for these systems rather than a generic substitute. This isn't a concern unique to this listing — it reflects GE's general guidance for electrical components used in flammable-refrigerant refrigerators, and confirming your model and refrigerant type before ordering is the appropriate precaution.
My refrigerator is noisy and runs warm. Is this the condenser fan?
It's a strong possibility, especially if the noise seems to come from the back or bottom of the unit and you notice both symptoms together. Without proper airflow across the condenser coils, heat builds up in the machine compartment, which reduces the whole refrigeration cycle's efficiency and shows up as warmer-than-normal temperatures throughout the fridge.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Is this a genuine OEM part?
This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor
The EAU61524007 is a genuine LG OEM evaporator fan motor for LG and select Kenmore refrigerators. This motor circulates air over the evaporator coil and distributes that cooled air into the fresh food and freezer compartments in a balanced way, which is what keeps temperatures even throughout the refrigerator and helps prevent frost from building up on the coil.
DC-powered, white in color, with an assembled height of approximately 1 inch. Over time, the motor's bearings can wear out, or general electrical failure can set in from years of continuous cycling. A failing evaporator fan motor produces a wide range of symptoms since it affects both compartments and the defrost system: the refrigerator may not start at all, either compartment may run too warm or too cold, or frost buildup may appear where it shouldn't. Unusual noise from the freezer is another common early sign of a struggling motor. It directly replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349.
Quick Answer
The EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor fixes LG and select Kenmore refrigerators that won't start, run too warm or too cold in either compartment, or show frost buildup where it shouldn't be. DC motor, white, approx. 1" assembled height. Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, PD00006349. Not the same as the similarly-numbered EAU61524002 motor (DC13V, 0.265A, 3.5W) — confirm you have the exact number before ordering.
Common Problems This Part Fixes
Refrigerator won't start
Refrigerator compartment running too warm
Refrigerator compartment running too cold
Freezer compartment running too warm
Freezer compartment running too cold
Frost buildup where it shouldn't be occurring
Unusual noise from the freezer indicating a struggling fan motor
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
EAU61524007, EAU60694510, 3286319, AP5950081, EAP10058947, PS10058947, ALG54568, PD00006349
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select LG refrigerators, and also fits select Kenmore and Kenmore Elite refrigerators built on the LG platform, including model numbers such as LFX31915SW, LFX25992ST, and GRL318LSJP.
Note — not the same as EAU61524002: A similarly-numbered part, EAU61524002, is a separate LG evaporator/freezer fan motor rated DC13V, 0.265A, 3.5W, used on different models. Always verify your full model number and match the exact part number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine LG OEM part — factory-specified motor design and airflow performance
Circulates air over the evaporator coil and distributes it evenly to both compartments
Resolves "won't start," "running too warm or too cold," and "frost buildup" symptoms caused by fan motor failure
DC-powered motor
White finish, approximately 1" assembled height
Direct drop-in replacement matching the original mounting and blade fitment
Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349
Compatible with LG and select Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
EAU61524007
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Brand
LG
Function
Circulates air over the evaporator coil to both compartments
Power Type
DC
Color
White
Assembled Height
Approx. 1 in.
Quantity
1 fan motor
Compatible Brands
LG, Kenmore, Kenmore Elite
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new EAU61524007 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator won't start at all. Could this really be the fan motor?
Yes, this is one of the documented symptoms for this part on LG's own service guidance. Because this motor is tied into the refrigeration and defrost circuit, a failure here can present as the unit not starting at all, in addition to the more expected symptoms like temperature problems or noise. That said, other components can produce a similar no-start symptom, so it's worth confirming this diagnosis if you're not fully certain.
Both compartments are running warm, not just one. Does that still point to this motor?
Yes. Since this motor is responsible for distributing cooled air to both the fresh food and freezer compartments from the evaporator coil, a failure here can affect both areas simultaneously rather than just one, unlike some other fan motor designs that mainly affect the compartment further from the coil.
How do I make sure I'm ordering this exact motor and not a similar one?
Check the part number printed directly on your old motor if it's legible, or confirm your refrigerator's full model number against the compatibility list. LG has released similarly-numbered motors, such as EAU61524002, that serve different models and have different electrical specifications, so matching by number is more reliable than matching by general appearance.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, blade fitment, and mounting configuration of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11224591 Refrigerator Evaporator Fan Motor
The XPARTCO W11224591 is an aftermarket replacement freezer evaporator fan motor assembly compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore bottom-mount French door refrigerators. The evaporator fan motor is located in the freezer compartment behind the rear panel — it draws cold air across the evaporator coils and circulates it throughout both the freezer and the fresh food compartment. This constant air movement is what keeps temperatures even and food fresh. When the fan motor fails, the most common symptom is telling: the refrigerator (fresh food) compartment stops cooling while the freezer stays cold but doesn't reach full capacity, because the fan is no longer moving the cold air up into the fridge section.
This is a complete assembly that includes the fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat — everything integrated into one replaceable unit. Finished in white. As a direct replacement for the Whirlpool W11224591, it also replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521. Motor failure typically results from normal wear, obstruction from frost or debris rubbing the fan blade, or motor winding issues. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO W11224591 Refrigerator Evaporator Fan Motor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, and Amana bottom-mount French door refrigerators where the fridge section is warm but the freezer is cold, temperatures are uneven, frost builds up on the coils, or unusual noise comes from the freezer compartment. Complete assembly — includes fan motor, wiring harness, temperature sensor, and defrost thermostat. White finish. Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, PS12349521. Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series and related models.
Common Problems This Part Fixes
Refrigerator (fresh food) compartment warm while the freezer stays cold — the signature symptom of evaporator fan motor failure
Uneven or inconsistent temperatures throughout the refrigerator
Unusual noises from the freezer compartment — grinding, squealing, or clicking as the motor bearings fail or the blade rubs on frost/ice
Frost or ice buildup around the cooling sections and evaporator coils
Refrigerator running continuously or more frequently than usual to compensate for poor air circulation
Noticeable decrease in overall cooling efficiency
Food spoiling faster than normal in the fresh food compartment
Fan motor not spinning at all when the compressor is running
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor assembly directly replaces the following OEM and cross-reference part numbers:
W11224591, W10865431, 4844712, W10728111, W11215582, AP6329809, AWP43665, EAP11738038, FIX12349521, DLB5985WPEB, PD00052715, PS12349521.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select bottom-mount French door refrigerators from the following brands:
Whirlpool refrigerators — WRF757SDHV00, WRF757SDHZ00/Z01/Z02, WRF767SDHV00/V02, WRF767SDHZ00/Z01/Z02 series
Whirlpool refrigerators — WRF736SDAB14, WRF736SDAM14, WRF736SDAW14, 7WF736SDAM14 series
KitchenAid refrigerators — KRFF507HPS00/PS01/PS02, KRFF507HBS02, KRFF507HWH02 series
Maytag refrigerators — MFT2574DEH02 and related bottom-mount French door models
Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper refrigerators — select Whirlpool-built models
Kenmore / Sears and Ikea refrigerators — select Whirlpool-built models
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete evaporator fan motor assembly — includes fan motor, wiring harness, temperature sensor (thermistor), and defrost thermostat in one integrated unit
Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments for even temperatures
Resolves the classic "fridge warm, freezer cold" symptom of evaporator fan failure
Prevents frost buildup by maintaining proper airflow across the coils
White finish, direct-fit replacement using original mounting points and connectors
Because the assembly bundles the defrost thermostat and temperature sensor, it addresses multiple potential failure points in a single repair
Replaces AP6329809, W10865431, W10728111, W11215582, 4844712, and PS12349521
Compatible with Whirlpool WRF757/WRF767/WRF736 series, KitchenAid KRFF507 series, Maytag MFT2574 series, plus Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea Whirlpool-built bottom-mount refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
W11224591
Part Type
Freezer Evaporator Fan Motor Assembly
Condition
Aftermarket Replacement
Application
Bottom-Mount French Door Refrigerators (Whirlpool platform)
Assembly Includes
Fan Motor, Wiring Harness, Temperature Sensor (Thermistor), Defrost Thermostat
Location
Freezer compartment, behind rear panel
Color
White
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer compartment behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear freezer access panel and lift it away to expose the evaporator coils and fan motor assembly. Photograph the wiring harness connections and the fan motor orientation before disconnecting anything. Disconnect the wire harness connectors from the old assembly and release it from its mounting points. Lift out the old fan motor assembly. Install the new W11224591 assembly using the original mounting points and connectors — since this is a complete assembly, the fan motor, harness, temperature sensor, and defrost thermostat all transfer as one unit. Reconnect the wiring harness, matching your photos. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Test airflow and temperature consistency before considering the job complete. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My refrigerator section is warm but the freezer is still cold — is this the fan motor?
This is the single most common and telling symptom of a failed evaporator fan motor on these bottom-mount French door refrigerators. Here's why: the evaporator coils (which produce the cold) are in the freezer, and the evaporator fan is what pushes that cold air up into the fresh food compartment. When the fan motor fails, the freezer stays cold (it's right next to the coils) but the fridge section warms up because no air is being circulated to it. If your freezer is cold and your fridge is warm, the evaporator fan motor is the prime suspect. You can confirm by listening for the fan running when the compressor is on, or opening the freezer rear panel to see if the fan spins.
What's included with this part — is it just the motor?
This is a complete assembly, not just the bare motor. It includes the fan motor, the wiring harness, the temperature sensor (thermistor), and the defrost thermostat — all integrated into one unit. This is actually an advantage: since these components live together in the freezer compartment and can each cause cooling problems, replacing them as a bundle addresses multiple potential failure points in a single repair, reducing the chance you'll be back in the freezer compartment a few months later for a related part.
Why is my evaporator fan making noise?
A noisy evaporator fan usually means one of two things: the motor bearings are wearing out (producing grinding or squealing), or the fan blade is rubbing against frost or ice that has built up around it. If frost buildup is the cause, that often points to a secondary problem with the defrost system (defrost heater, thermostat, or control) allowing ice to accumulate where it shouldn't. Since this replacement assembly includes a new defrost thermostat, it addresses one of the common defrost-related causes. If heavy frost keeps returning after replacement, the defrost heater or control board should be investigated next.
Do I need to defrost the freezer before installing this?
If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new assembly. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, placing towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. Once everything is fully thawed and dried, proceed with the fan motor replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the fit, mounting points, connector configuration, and function of the original W11224591 evaporator fan motor assembly used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore bottom-mount French door refrigerators — including the integrated harness, temperature sensor, and defrost thermostat.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W11452196 Refrigerator Evaporator Fan Motor – Replacement for Whirlpool, Maytag, KitchenAid, Amana
Product Overview
This Evaporator Fan Motor is a replacement part for specific Whirlpool refrigerator models. It circulates cool air within the refrigerator compartment to maintain even temperatures throughout. The evaporator motor works in conjunction with the cooling system, drawing in warm air and distributing cold air via its high-efficiency fan blades. Causes of a bad evaporator motor can include normal wear over many operating hours, damages from dust or debris buildup, and failures in the motor winding or power control mechanisms.
Replaces Part Numbers
This motor replaces part numbers W11452196, W11032800, WPW10514110, W10514110, W10728094, W10466226, W10561029, W11374554, AP6987262, PS16217991.
It is engineered to match the performance and fit of the original OEM part for reliable operation.
Compatible Brands
Compatible with a wide range of Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, and Kenmore refrigerators that use this style of evaporator fan motor. Fits many bottom freezer, French door, and side-by-side models.
Fixes the Following Issues
Refrigerator or freezer not cooling properly
Inconsistent or uneven airflow
Loud or non-functioning fan motor
Ice buildup due to poor air circulation
Why Buy from Parts‑O‑Matic
Cost-effective aftermarket solution
Fast and free U.S. shipping
Trusted by appliance repair technicians and DIYers
Simple installation and responsive customer support
XPARTCO WR60X35205 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X35205 is an aftermarket replacement fresh food evaporator fan motor for GE refrigerators. This small DC motor drives the fan that circulates cold air from the evaporator across the fresh food (refrigerator) compartment, keeping temperature consistent throughout the section — especially important on larger or multi-zone units where air needs to reach multiple shelves and drawers evenly. When the motor's bearings wear out or the windings fail, airflow to the fresh food section drops off even though the freezer keeps working normally, since the two compartments typically run on separate fan motors.
Rated 13.6V DC, 0.16A, this is a direct-fit aftermarket replacement built to the same mounting and electrical specification as the original motor. A quieter-running motor than a worn original is a common result after replacement, since failing bearings are often what make the old motor noisy before it fails outright.
Quick Answer
The XPARTCO WR60X35205 Evaporator Fan Motor fixes a GE refrigerator whose fresh food (fridge) compartment is running warm while the freezer still works fine, or that makes a new buzzing/grinding noise from the fan area. 13.6V DC / 0.16A, direct-fit replacement. Classic symptom: fridge section creeping up toward 50-55°F while the freezer stays cold, often paired with a noisy fan just before failure.
Common Problems This Part Fixes
Fresh food (refrigerator) compartment running warm while the freezer stays cold
Buzzing, grinding, or rattling noise from the fan area — often a sign of a failing bearing
Inconsistent or uneven cooling across refrigerator shelves and drawers
Food in the bottom crisper drawers freezing unexpectedly due to airflow imbalance
Fan not running at all, or running intermittently
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This fan motor directly replaces the following part numbers:
WR60X35205, WR60X29099, WR60X20880, WR60X24723, WR60X26281, DAZB0838RCM, 197D9873P003, AGE29910, AP6997194, EAP16226575, PD00071276, PS16226575
These numbers span several generations of GE's own part numbering for this fan motor as the design was updated over time — all are the correct replacement for this fan motor regardless of which number appears on your refrigerator's parts diagram.
Compatibility
This fan motor is compatible with 30+ GE refrigerator models, including:
CFE28TP2MDS1, CFE28TP2MES1, CFE28TP2MFS1
CFE28TP3MDD1, CFE28TP3MED1, CFE28TP3MFD1
CFE28TP4MDW2, CFE28TP4MEW2, CFE28TP4MFW2
CFE28TSHBSS
GFE28HSHDSS, and numerous additional GE French-door and multi-zone refrigerator models
Note: This is specifically the fresh food (refrigerator) compartment evaporator fan motor, not the freezer fan motor — many GE refrigerators use a separate fan for each compartment, and this part will not resolve a freezer-side airflow problem. Confirm which compartment's fan has failed before ordering, or contact our support team with your model number to verify before ordering.
Key Features
Direct-fit aftermarket fresh food evaporator fan motor for GE refrigerators
13.6V DC, 0.16A rating matches OEM specification
Resolves warm-fridge-with-cold-freezer, noisy fan, and uneven cooling symptoms
Often runs quieter than a worn original motor after replacement
Fits 30+ GE French-door and multi-zone refrigerator models
Straightforward swap — typically 30–60 minutes with basic hand tools
Product Specifications
Part Number
XPWR60X35205
OEM Part Number
WR60X35205
Part Type
Refrigerator Fresh Food Evaporator Fan Motor
Condition
Aftermarket Replacement
Voltage
13.6 Volt DC
Amperage
0.16 Amp
Application
GE French-Door & Multi-Zone Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator or switch off its circuit breaker before beginning. Remove the interior back panel or evaporator cover inside the fresh food compartment per your model's service guide — you may need to remove shelves or drawers first for access. Some models require a short defrost/thaw wait if frost has built up around the evaporator assembly. Disconnect the wire harness from the old fan motor, remove the mounting screws or clips, and note the fan blade's orientation before removing it. Transfer the fan blade to the new motor if it isn't included, install the new motor in the same position, reconnect the wire harness, and reinstall the cover and any shelves. Restore power and confirm the fan runs quietly and the compartment begins cooling normally.
Frequently Asked Questions
My fridge is warm but my freezer is fine — is this the part I need?
Yes, this is a classic symptom of a failed fresh food evaporator fan motor. Since many GE refrigerators use separate fans for the fridge and freezer compartments, a fan failure on the fridge side won't affect freezer cooling.
My fan is making a buzzing or grinding noise but still runs — should I wait until it fails completely?
Not recommended. A buzzing or grinding noise is a common sign of a failing motor bearing, and these motors often run noisy for a period before failing outright. Replacing it at the first sign of noise can prevent a sudden loss of cooling.
Is this the freezer fan or the fridge fan?
This is specifically the fresh food (refrigerator) compartment fan motor, not the freezer fan. If your freezer isn't cooling or circulating air properly, you'll need the separate freezer evaporator fan motor part instead.
Does this include the fan blade?
This listing is for the fan motor. In most cases the original fan blade transfers over to the new motor during installation — check your specific motor and blade assembly when you remove the old unit.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WR60X25858 Freezer Genuine OEM Evaporator Fan Motor
The WR60X25858 is a genuine GE OEM freezer evaporator fan motor for GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore models. Located in the freezer compartment, this motor circulates air across the evaporator coil and out into the freezer and, on many models, the fresh food compartment, drawing heat out of the air to maintain consistent, efficient cooling throughout the appliance.
Rated 13.6V DC, 0.23 amps, with fan dimensions of approximately 4.5" x 4.5" and a wiring harness and plug extending about 8.25" from the frame. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the freezer failing to cool properly and warming up, insufficient airflow, excessive frost buildup, higher-than-normal freezer temperatures, or unusual noise — often caused by frost or ice rubbing against the fan blade as it turns. It directly replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431.
Quick Answer
The WR60X25858 Freezer Genuine OEM Evaporator Fan Motor fixes GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators with a freezer that's warming up, insufficient airflow, excessive frost, or unusual noise from the fan area. 13.6V DC, 0.23A, ~4.5" x 4.5", 8.25" harness. Replaces 239D1371P002, 3033253, 4931166, AP5669723, AP6891698, EAP12727431, EAP7320382, PS12727431, PS7320382, U11P14MS7AA3-57A61, WR60X10340, AGE29632. If your freezer isn't cold, check the evaporator fan first — but while you're in there, cleaning frost or ice off the fan blade and vacuuming the condenser coils are worthwhile companion steps.
Common Problems This Part Fixes
Freezer not cooling properly, warming up
Insufficient airflow through the freezer compartment
Excessive frost buildup
Higher-than-normal freezer temperatures
Unusual noise from the fan area, including frost or ice rubbing on the blade
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This freezer evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators built on the GE platform, including model numbers such as DFE29JSDFSS and DFE29JGDAWW.
Note: GE uses several different evaporator fan motors across its refrigerator lineup, including WR60X26866 and WR60X26033 for other models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine GE OEM part — factory-specified motor design and airflow rating
Circulates air across the evaporator coil to draw heat out and cool the freezer
Resolves "freezer warming up," "insufficient airflow," "excessive frost," and "unusual noise" symptoms
Rated 13.6V DC, 0.23 amps
Approximately 4.5" x 4.5", with an 8.25" wiring harness and plug
Direct drop-in replacement matching the original mounting and connections
Replaces 239D1371P002, 3033253, 4931166, U11P14MS7AA3-57A61, WR60X10340, AGE29632, AP6891698, EAP12727431, EAP7320382, PD00054264, PS12727431
Compatible with GE, Hotpoint, Haier, Monogram, Café, Profile, and Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 15 to 30 minutes
Product Specifications
Part Number
WR60X25858
Part Type
Freezer Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
13.6V DC
Amperage
0.23 A
Fan Dimensions
Approx. 4.5" x 4.5"
Harness/Plug Length
Approx. 8.25" from frame
Repair Difficulty
Easy — 15 to 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Profile, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Clear Any Frost Or Ice From The Fan Area Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor in the freezer compartment, typically behind an interior panel covering the evaporator coil assembly. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing — restricted airflow from ice is a common contributor to fan motor strain and noise. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new WR60X25858 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. While you're in this area, vacuuming out any accessible condenser coils is a good complementary maintenance step. Restore power and monitor the freezer's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer isn't cold anymore. Is this the part I need?
Yes, this is one of the most common causes of a freezer that won't cool. One customer specifically reached out after their freezer wasn't cold, watched a diagnostic video explaining the evaporator fan's role, and confirmed this motor was the cause before ordering the replacement.
I hear a strange noise from inside my freezer. Could this be the fan motor?
Yes, this is a well-documented symptom. Noise often occurs when the fan motor itself is wearing out, or when frost or ice has built up enough to rub against the spinning fan blade. Clearing any ice buildup before replacing the motor helps you confirm whether the noise was from ice contact or the motor itself.
Should I do anything else while I have the freezer open for this repair?
It's a good opportunity to check for and clear any frost or ice buildup around the fan and coil area, since restricted airflow can contribute to fan strain. One customer also vacuumed out the condenser coils during the same repair, which is a reasonable companion maintenance step while everything is accessible.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, voltage, and connection type of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X10257 (OE) Refrigerator Evaporator Fan Motor
The WR60X10257 is an OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor, for GE and Hotpoint refrigerators. Located at the back of the freezer, this motor circulates air across the evaporator coils, which convert refrigerant into cooling capacity — the fan is what carries that cold air into both the freezer and fresh food compartments.
Rated 115V, 60Hz, 2.4W. Common failure causes include worn motor bearings and general electrical wear. A failing motor produces a recognizable symptom: the freezer may stay reasonably cold while the fresh food section runs warm, since the fresh food compartment depends entirely on this fan to receive circulated cold air. Other symptoms include unusual noise from the freezer or inconsistent cooling overall. It directly replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496.
Quick Answer
The WR60X10257 (OE) Refrigerator Evaporator Fan Motor fixes GE and Hotpoint refrigerators where the freezer stays cold but the fresh food section runs warm, there's unusual noise from the freezer, or cooling is inconsistent. 115V, 60Hz, 2.4W. Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, PD00028496. This is a 115V AC-powered motor — a different design from the 9.75V DC evaporator fan motors in our WR60X10074, WR60X10185, and WR60X10318 listings. Always match your original motor's voltage type before ordering.
Common Problems This Part Fixes
Freezer stays cold but the fresh food compartment runs warm
Refrigerator or freezer sections too warm overall
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Inconsistent or fluctuating refrigerator temperatures
Refrigerator running constantly as it struggles to maintain temperature
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
What Is an OE Part?
OE (Original Equipment) means this part is manufactured by the same original supplier that produces the Genuine OEM version — identical fit, materials, and performance. The only difference is packaging: OE parts ship under our XPARTCO brand rather than the appliance manufacturer's branded box, which is why they can't be listed as Genuine OEM. You get factory-original quality at a more affordable price.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10257, 1373246, 200D5001P003, UDQR002GNL, WR60X10129, AP4318644, EAP1766252, PS1766252, AGE29237, PD00028496
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Haier, Monogram, and Café refrigerators built on the GE platform, including model numbers such as ETS22SBPARBS, ETS22SBSARSS, and GTS22FBPBRWW.
Note — 115V AC, not 9.75V DC: This motor is a different design and voltage class from the DC evaporator fan motors used on other GE refrigerator platforms, including our WR60X10074, WR60X10185, and WR60X10318 listings (all 9.75V DC). Check your old motor's voltage rating, printed on the motor itself, before ordering — a DC motor and this AC motor are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
OE (Original Equipment) evaporator fan motor, also known as an AC/DC fan motor
Circulates air across the evaporator coils to cool the freezer and fresh food compartments
Resolves "freezer cold but fridge warm," "unusual noise," and "inconsistent cooling" symptoms caused by fan motor failure
Rated 115V, 60Hz, 2.4W
Direct drop-in replacement matching the original mounting and blade fitment
Replaces 1373246, 200D5001P003, AP4318644, EAP1766252, PS1766252, AH1766252, UDQR002GNL, WR60X10129, AGE29237, and PD00028496
Compatible with GE, Hotpoint, Haier, Monogram, and Café refrigerators
OE (Original Equipment) — manufactured by the same original supplier as the Genuine OEM part
Product Specifications
Part Number
WR60X10257-OE
Part Type
Refrigerator Evaporator Fan Motor
Designation
OE (Original Equipment)
Compatible Brand
GE
Location
Back of the freezer, over the evaporator coils
Voltage
115V AC
Frequency
60 Hz
Wattage
2.4 W
Dimensions
4"H x 2-3/4"W x 17"D
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10257 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My freezer is cold but the fridge section is warm. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits close to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on this fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area.
How do I know if I need this 115V motor or one of your DC motors?
Check the voltage rating printed directly on your old motor before ordering. This WR60X10257 is a 115V AC-powered motor, while our WR60X10074, WR60X10185, and WR60X10318 listings are all 9.75V DC motors used on different GE refrigerator generations. The two motor types are not interchangeable, so matching the voltage rating on your original motor is the most reliable way to confirm which one you need.
Is this a genuine OEM part?
This is an OE (Original Equipment) part sold under our XPARTCO brand. OE parts are manufactured by the same original supplier that produces the Genuine OEM part, so the fit, materials, and performance are identical — the difference is that OE parts ship in XPARTCO packaging rather than the appliance manufacturer's branded box, which is why we can't list them as Genuine OEM. This gives you factory-original quality at a more affordable price than the branded version.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR60X10074 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X10074 is an aftermarket replacement evaporator fan motor with thermistor for GE and Hotpoint refrigerators. This motor is located at the back of the freezer and circulates air across the evaporator coils, which convert refrigerant into cooling capacity — the fan is what carries that cooled air into both the freezer and fresh food compartments. Bundled with this motor is a separate thermistor that snaps onto the top portion of the evaporator and sends temperature signals back to the main control board, letting it regulate cooling accurately.
Rated 9.75V DC, 3.25W — the same base motor used in our WR60X10185 listing, but this version ships with the thermistor included. GE's own guidance is direct on this point: the thermistor should be replaced at the same time as the evaporator fan, since the two are serviced together under this part number rather than sold and swapped independently. Common failure causes include worn motor bearings and general electrical wear. Symptoms include unusual noise from the freezer, a refrigerator or freezer section running too warm, or inconsistent temperatures overall. It directly replaces AP3191003, 914169, 197D4492G001, and 197D2039P013.
Quick Answer
The XPARTCO WR60X10074 Refrigerator Evaporator Fan Motor fixes GE and Hotpoint refrigerators with unusual noise from the freezer, a refrigerator or freezer section running too warm, or inconsistent cooling overall. 9.75V DC, 3.25W, includes thermistor. Replaces AP3191003, 914169, 197D4492G001, 197D2039P013. This is the motor-plus-thermistor version — if your old connector has no thermistor wire, you need our WR60X10185 listing instead; this is also a different assembly from our WR60X10318 side-by-side listing, which has the thermistor integrated into the motor's own harness rather than as a separate snap-on piece.
Common Problems This Part Fixes
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Fresh food compartment or freezer running too warm
Inconsistent or fluctuating refrigerator temperatures
Refrigerator running constantly as it struggles to maintain temperature
Fan motor that has gone silent after previously running normally
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10074, 197D4492G001, 914169, AH304658, AP3191003, AGE29122, PD00001062, EA304658, PS304658
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, including model numbers such as DSS25PFMCCC.
Note — check your connector before ordering: This motor includes the thermistor. If your old motor's connector has no thermistor wire — a plain 4-wire harness with 2 empty pin slots on a 6-pin connector — you need our WR60X10185 listing instead (no thermistor). If your connector has a dedicated light connector, you need WR23X10467. This part is also a separate assembly from our WR60X10318 listing, a side-by-side platform motor with the thermistor built directly into its own 6-pin harness rather than snapping onto the evaporator as a separate piece. Even between similar GE thermistor-equipped motors, always verify your full model number, since GE support has confirmed these are not automatically interchangeable without checking your specific model. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Aftermarket replacement evaporator fan motor — circulates air across the evaporator coils to cool the freezer and fresh food compartments
Includes a separate thermistor that snaps onto the top of the evaporator and reports temperature to the main control board
Resolves "unusual noise," "running too warm," and "inconsistent cooling" symptoms caused by fan motor or thermistor failure
Rated 9.75V DC, 3.25W
Direct drop-in replacement matching the original mounting and blade fitment
Replaces AP3191003, 914169, 197D4492G001, and 197D2039P013
Compatible with GE and Hotpoint refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
WR60X10074
OEM Part Number
WR60X10074
Part Type
Refrigerator Evaporator Fan Motor with Thermistor
Condition
Aftermarket Replacement
Brand
GE
Location
Back of the freezer, over the evaporator coils
Voltage
9.75V DC
Wattage
3.25 W
Includes Thermistor
Yes — snaps onto the top of the evaporator, sold together
Weight
Approx. 0.6 lb.
Quantity
1 fan motor + 1 thermistor
Compatible Brands
GE, Hotpoint
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Replace The Thermistor Along With The Motor Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil, fan, and thermistor. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector, the fan blade's orientation, and the thermistor's snap-on position before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Unsnap the old thermistor from the top of the evaporator and disconnect its wiring as well. Install both the new motor and the new thermistor together, even if only one of them tested as failed — GE's own guidance is to replace the thermistor whenever the evaporator fan is replaced, since they're serviced as a pair under this part number. Mount the new motor in the same position, reconnect the wiring harness connector, and snap the new thermistor onto the same spot on the evaporator, reconnecting its wiring. Confirm the fan blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Do I really need to replace the thermistor if only the fan motor stopped working?
GE's official guidance is yes — the thermistor should be replaced along with the evaporator fan whenever this part number is used, since they're sold and serviced together as a pair rather than as fully independent components. That said, some technicians have successfully replaced just the fan motor alone in certain situations; if you want to attempt a fan-only swap, test your existing thermistor first and keep in mind this isn't the manufacturer-recommended approach.
How do I know if I need this motor or the WR60X10185 (no thermistor) version?
Look at your old motor's electrical connector before ordering. This WR60X10074 motor comes with a thermistor — if your connector has a thermistor wire running to it, this is the correct part. If your connector is a plain 4-wire harness with no thermistor wire and two empty pin positions on a 6-pin plug, you need our WR60X10185 listing instead, which does not include a thermistor.
My fridge isn't cooling but the fan seems to spin fine. Could it still be this part?
Yes — if the fan is spinning but the fridge still isn't cooling properly, the thermistor half of this assembly is worth suspecting, since a faulty thermistor can send incorrect temperature readings to the control board even while the fan motor itself works fine. One customer confirmed their control board and thermistor initially "checked good" before eventually tracing a similar symptom to fan circulation — so it's worth testing both components rather than assuming the fan alone is the issue.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the 9.75V, 3.25W motor design, blade fitment, and thermistor function of the original WR60X10074 evaporator fan motor and thermistor used in compatible GE and Hotpoint refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WR60X31522 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X31522 is a Genuine OEM GE replacement evaporator fan motor compatible with select GE, Hotpoint, RCA, and Americana top-mount freezer refrigerators. The evaporator fan motor is located at the back of the freezer compartment and circulates air across the evaporator coils — converting the heat from the air into cool air that's then distributed throughout both the freezer and fresh food sections. Without a properly functioning evaporator fan, the refrigerator can't move cold air where it's needed, causing the fresh food and/or freezer sections to warm up, ice to build up on the coils, and the compressor to run continuously trying to compensate.
This 115V AC motor is rated at 60Hz, 3.3W and uses a 2-pin connector plus ground wire. Dimensions are 3-1/4"L x 2-3/8"W x 3-3/8"H, with a harness and plug extending approximately 3-1/2" from the motor. Construction is plastic and metal in marbled white & gray. Note: this listing is for the motor with harness only — the fan blade may need to be transferred from the old motor. It directly replaces WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X10141, WR60X10346, WR60X23584, WR60X27646, WR60X28783, WR60X28784, WR60X31122, WR60X31523, 4959523, 197D2038P031, AP6977246, EAP12741350, PD00062864, and PS12741350. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The WR60X31522 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, RCA, and Americana top-mount freezer refrigerators that aren't cooling properly, have heavy frost buildup on the evaporator coils, run continuously, or are noisy from the freezer compartment. 115V AC, 60Hz, 3.3W. 2-pin connector + ground wire. 3-1/4"L x 2-3/8"W x 3-3/8"H. Marbled white & gray. Replaces WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X10141, WR60X10346, WR60X23584, WR60X27646, WR60X28783, WR60X28784, WR60X31122, WR60X31523, 4959523, 197D2038P031, AP6977246, EAP12741350, PD00062864, PS12741350.
Common Problems This Part Fixes
Refrigerator fresh food and/or freezer sections not cooling properly
Heavy frost or ice buildup on the evaporator coils ("Antarctica" frost)
Loud whining, grinding, or scraping noise from the freezer compartment
Fan blade not spinning when checked by hand or stiff/seized rotation
Refrigerator running continuously trying to maintain temperature
Compressor running but cool air not being circulated
Motor failing continuity test with a multimeter
Visible damage to the fan motor or its harness
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X31522, WR60X23584, WR60X10141, WR60X10346, WR60X28783, WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X27646, WR60X28784, WR60X31122, AGE29819, 115V-60Hz 3.3W, 197D2038P031, UDQR002GLL, FDQR002GSL, AGE29819, PD00062864, AP6977246, PS12741350.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE, Hotpoint, RCA, and Americana refrigerators, typically top-mount freezer units:
GE top-mount refrigerators (select models)
GE Profile and Café refrigerators (select models)
Hotpoint refrigerators (select models)
RCA refrigerators (select GE-built models)
Americana refrigerators (select GE-built models)
Note: Some refrigerator models have two evaporator fan motors — one in the fresh food section and one in the freezer section. The WR60X31522 is typically the freezer-section evaporator fan motor on top-mount style refrigerators. Confirm the failed motor's location and that the WR60X31522 part number matches your refrigerator's parts diagram before ordering. Always verify your appliance model number first.
Key Features
Evaporator fan motor for the freezer compartment of compatible GE/Hotpoint top-mount refrigerators
Pulls air through the evaporator coils to remove heat and circulate cool air throughout the refrigerator
115V AC, 60Hz, 3.3W — correct electrical specifications for compatible GE-platform refrigerators
2-pin connector plus ground wire — direct plug-in installation with the included harness
Dimensions: 3-1/4"L x 2-3/8"W x 3-3/8"H; harness and plug extend approximately 3-1/2" from the motor
Marbled white & gray plastic and metal construction
Replaces 18 OEM and aftermarket cross-reference part numbers including WR60X10045, WR60X10141, WR60X23584, WR60X27646, WR60X28783, WR60X31122, and PS12741350
Compatible with GE, Hotpoint, RCA, and Americana refrigerators (top-mount freezer units)
Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
WR60X31522
Part Type
Refrigerator Evaporator Fan Motor (Freezer Section)
Condition
Genuine OEM
Application
Top-Mount Freezer Refrigerators (GE platform)
Voltage
115V AC
Frequency
60 Hz
Wattage
3.3W
Connector
2-pin connector plus ground wire
Dimensions
3-1/4"L x 2-3/8"W x 3-3/8"H
Harness Length
Approximately 3-1/2" from motor
Color
Marbled White & Gray / Gray
Material
Plastic / Metal
Includes
Evaporator fan motor with harness and plug (fan blade may need to be transferred from old motor)
Compatible Brands
GE, Hotpoint, RCA, Americana
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located at the back of the freezer compartment, behind an interior access panel. Remove the freezer shelves and any internal components blocking access to the rear panel. Remove the screws holding the rear access panel in place to expose the evaporator coils and fan motor. Photograph the wire connections and fan blade orientation before disconnecting. Disconnect the 2-pin wire harness connector and the ground wire from the old motor. Note the orientation of the fan blade on the motor shaft — the blade typically presses onto the shaft and may need to be transferred to the new motor. Remove the mounting screws or release the motor from its mounting bracket, and pull the old motor free. Carefully transfer the fan blade to the new WR60X31522 motor in the same orientation (or use a new blade if you have one). Install the new motor in the same position, reconnect the wire harness and ground wire, and reinstall the access panel and shelves. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
How do I know if the evaporator fan motor has failed?
The most common symptoms are: the refrigerator or freezer is warmer than its set temperature even though the compressor sounds like it's running normally; heavy frost or ice buildup on the evaporator coils behind the freezer access panel ("Antarctica" frost); and loud whining, grinding, or scraping noise from the freezer area. To confirm: unplug the refrigerator, remove the rear freezer access panel, and try turning the fan blade by hand. If it doesn't spin freely or is stiff/seized, the motor bearing has failed. You can also test for motor continuity with a multimeter — no continuity confirms electrical failure.
My refrigerator has two evaporator fans — which one does this replace?
Some refrigerator models have two evaporator fan motors — one in the fresh food section and one in the freezer section. The WR60X31522 is typically the freezer-section evaporator fan motor on top-mount style GE and Hotpoint refrigerators. If your symptom is "freezer not cooling properly" or "frost on freezer coils," this is the correct part. If your symptom is specifically "fresh food section warm while freezer is fine" on a French door refrigerator, you may need a different fan motor — contact our support team with your model number to confirm.
Does this motor come with the fan blade?
No — the WR60X31522 listing is for the motor with harness and plug only. The fan blade is typically transferred from the old motor: carefully pull it off the old motor shaft (it presses on, no hardware needed), and press it onto the new motor shaft in the same orientation. If your old fan blade is damaged or cracked, it should be replaced separately. Installing the blade in the wrong direction will reverse the airflow and reduce cooling performance.
What's the difference between the WR60X31522 (115V AC) and DC motors like the WR60X10209 or WR60X26866?
GE refrigerators use different fan motor technologies across model generations. The WR60X31522 is a 115V AC motor with a 2-pin connector plus ground — used in many GE and Hotpoint top-mount freezer refrigerators. The WR60X10209 and WR60X26866 are DC voltage motors (around 11–14V DC) used in newer GE French door refrigerators with electronic control boards that supply variable DC voltage for energy-efficient variable-speed fan operation. These are not interchangeable — always verify the correct part number for your specific refrigerator model before ordering.
Is this an OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same evaporator fan motor installed in compatible GE, Hotpoint, RCA, and Americana refrigerators from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WP2315539 Genuine OEM Whirlpool Refrigerator Evaporator Fan Motor
The WP2315539 is a genuine Whirlpool OEM evaporator fan motor for Whirlpool side-by-side refrigerators. This motor draws air across the evaporator coil, cooling it, and circulates that cold air from the freezer into the fresh food compartment, keeping both sides of the refrigerator at consistent, even temperatures and preventing warm spots that can lead to food spoilage. This part features an incorporated wire harness.
Over time, the motor's bearings wear out or the motor fails electrically, and when this happens it commonly generates noticeable noise from the freezer area before it fails completely. Symptoms include unusual noise from the freezer, the fresh food compartment running warm while the freezer stays cold, ice buildup on the evaporator coil, or inconsistent cooling overall. It directly replaces 2219689, 2225625, 2315539, W10438708, and WP2315539VP.
Quick Answer
The WP2315539 Genuine OEM Whirlpool Refrigerator Evaporator Fan Motor fixes Whirlpool side-by-side refrigerators with unusual noise from the freezer, a fresh food compartment running warm while the freezer stays cold, ice buildup on the evaporator coil, or inconsistent cooling. Includes incorporated wire harness. Replaces 2219689, 2225625, 2315539, W10438708, WP2315539VP. Not the same as the similarly-numbered 2315549 motor — confirm you have the exact part number before ordering.
Common Problems This Part Fixes
Unusual or increasing noise coming from the freezer area
Fresh food compartment running warm while the freezer stays cold
Ice buildup on the evaporator coil
Inconsistent or fluctuating cooling throughout the refrigerator
Refrigerator running constantly as it struggles to maintain temperature
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WP2315539, 2315539, W10438708, 1372146, 2219689, 2225625, ESF-U2B, AP6007247, AWP47336, EAP11740359, PD00003243, PS11740359
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Whirlpool side-by-side refrigerators. Always verify your full model number before ordering, as this part is designed for the side-by-side (SxS) platform specifically.
Note — not the same as 2315549: This motor is a separate part from the similarly-numbered 2315549 evaporator fan motor, which is used on different Whirlpool refrigerator models. The two numbers are easy to mix up given how close they are — always confirm the exact part number from your appliance or parts diagram before ordering. This motor also includes an incorporated wire harness; if your original motor does not have one, a different, related part number may be needed instead. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine Whirlpool OEM part — factory-specified motor design and airflow performance
Circulates cold air from the freezer into the fresh food compartment on side-by-side models
Resolves "noisy freezer," "fresh food running warm," "ice buildup," and "inconsistent cooling" symptoms
Incorporated wire harness for a direct plug-in fit
Factory Certified Part built to Whirlpool's engineering specifications
Direct drop-in replacement matching the original mounting and blade fitment
Replaces 2219689, 2225625, 2315539, W10438708, and WP2315539VP
Compatible with Whirlpool side-by-side refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WP2315539
Part Type
Refrigerator Evaporator Fan Motor (SxS)
Condition
Genuine OEM
Brand
Whirlpool
Application
Side-by-Side Refrigerators
Function
Circulates cold air from the freezer to the fresh food compartment
Wire Harness
Incorporated
Repair Difficulty
Medium
Quantity
1 fan motor
Compatible Brand
Whirlpool
Installation Notes
⚠️ Unplug Refrigerator Before Starting Before beginning any repair work, always turn off power to the appliance and unplug it from the wall outlet, storing any perishable food safely while power is off. Wear work gloves. Remove the rear access panel from the refrigerator by unscrewing the screws attaching it to the back of the unit. Locate the evaporator fan motor within the refrigerator as indicated in your model's manual. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours before continuing. Unplug the wiring harness from the old fan motor, remove the screws securing it in place, and remove the old motor. Install the new WP2315539 in the same position, reconnect the wiring harness, and secure the new motor with the mounting screws. Replace the rear access panel and restore power, then check to confirm the fan motor is working properly and both compartments are cooling evenly. Tools needed: Phillips screwdriver, flathead screwdriver, work gloves.
Frequently Asked Questions
My freezer is getting noisy. Is this the evaporator fan motor?
It's a strong possibility. When this motor's bearings begin to wear, it commonly generates noticeable noise in the freezer area well before it fails outright. If you're hearing new or increasing noise from the freezer, this motor is a reasonable first thing to check.
Does this motor include the wire harness, or do I need to buy that separately?
This motor comes with an incorporated wire harness already attached, so no separate harness purchase is needed for a standard installation. If your original motor's connector setup looks different from what's included here, double-check compatibility with our support team before ordering.
Is this the same as the 2315549 motor I've seen listed elsewhere?
No, these are two separate part numbers that are easy to confuse given how similar they look. Always confirm the exact part number from your refrigerator's parts diagram or the sticker on your old motor rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, wire harness, and blade fitment of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
