XPARTCO 691366 Dryer Idler Pulley Assembly Replaces WP691366
The XPARTCO 691366 is an aftermarket replacement dryer idler pulley assembly compatible with a wide range of Whirlpool-family dryers — particularly models with the lint filter on top — including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, and Norge. The idler pulley assembly is a spring-tensioned arm and wheel that presses against the drum drive belt to maintain correct belt tension as it wraps around the drum and motor pulley. Without proper tension, the belt slips off the motor pulley, causing the drum to stop spinning. A worn idler pulley bearing also causes squealing, squeaking, or thumping noises during operation.
This is a complete idler arm and pulley assembly — it includes both the spring arm and the wheel, and mounts directly to the existing bracket in the dryer. Overall dimensions are 6"L x 1-5/8"W x 3-7/8"H with a 1-7/8" diameter pulley wheel. It replaces older Teflon friction-style idler pulleys and provides a smoother, longer-lasting ball-bearing wheel. It directly replaces WP691366, 691366, 239477, 337116, 337407, 3394332, 347034, 347226, 4319391, 688166, W10612905, AP6010582, PS11743765, and over 20 additional cross-reference numbers. Often replaced together with the drum belt (341241) and drum support rollers (349241T) as the 4392065 maintenance kit. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 691366 Dryer Idler Pulley Assembly fixes Whirlpool-family dryers that are squealing, thumping, or where the drum stops spinning because the belt has lost tension. Complete arm and pulley assembly. 6"L x 1-5/8"W x 3-7/8"H overall, 1-7/8" pulley diameter. Replaces older Teflon friction pulleys with ball-bearing wheel. Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, and more. Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, PS11743765. Often replaced with 341241 belt and 349241T rollers.
Common Problems This Part Fixes
Drum not spinning — belt has lost tension and slipped off the motor pulley
Loud squealing or squeaking noise during the drying cycle — worn idler pulley bearing
Thumping or clunking noise as the pulley wheel wobbles on a worn bearing
Belt repeatedly slipping or falling off after being reinstalled
Grinding noise from the idler pulley area — bearing fully failed
Dryer drum spinning intermittently due to inconsistent belt tension
Idler pulley arm visibly cracked, broken, or wheel no longer spinning freely
Replaces Part Numbers
This idler pulley assembly directly replaces the following OEM and cross-reference part numbers:
WP691366, 691366, 239477, 26000691366, 337116, 337407, 337510, 3388345, 338946, 3394332, 347034, 347226, 347277, 4319391, 688166, 691366BULK, 8207, 99989677, DE412, K35-163, W10612905, WP691366VP, AWP48059, EAP11743765, AP6010582, PD00002256, PS11743765.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley assembly is compatible with select gas and electric dryers from the following brands — particularly models with the lint filter on top:
Whirlpool dryers (gas and electric — WED, WGD, LE, LG, and related series with top lint filter)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers (gas and electric)
Amana dryers
KitchenAid dryers
Roper dryers
Crosley dryers
Estate dryers
Inglis dryers
Admiral dryers
Magic Chef dryers
Norge dryers
Note: The 691366 idler pulley is for older Whirlpool-family dryers with the lint filter on top. Newer Whirlpool dryers with the lint screen inside the door use the W10837240 idler pulley arm assembly instead. Always verify your model number before ordering.
Key Features
Complete idler arm and pulley assembly — includes both the spring-tensioned arm and the pulley wheel
Maintains correct drive belt tension so the belt grips the drum and motor pulley without slipping
Redesigned ball-bearing pulley wheel replaces older Teflon friction-style pulleys for longer service life and quieter operation
Overall dimensions: 6"L x 1-5/8"W x 3-7/8"H; pulley wheel diameter: 1-7/8"
Plastic arm with metal shaft and ball-bearing pulley wheel
Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, and over 30 additional cross-reference numbers
Compatible with 12 major appliance brands on the Whirlpool top-lint-filter platform
Often replaced together with the drum belt (341241) and drum rollers (349241T) — all three included in the 4392065 maintenance kit
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
691366
OEM Part Number
WP691366
Part Type
Dryer Idler Pulley Assembly (Arm and Wheel)
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers (lint filter on top models)
Overall Dimensions
6"L x 1-5/8"W x 3-7/8"H
Pulley Wheel Diameter
1-7/8 inches
Material
Plastic arm / Metal shaft / Ball-bearing pulley wheel
Color
Black / White
Includes
Complete idler arm and pulley assembly
Often Replaced With
341241 Drum Belt, 349241T Drum Rollers (4392065 kit)
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the screws inside the lint screen housing. Use a putty knife to release the top panel spring clips and lift the top panel. Remove the front panel to fully access the drum drive components. Release belt tension by pushing the idler pulley arm toward the motor and sliding the belt off. Note how the belt is routed before removing — take a photo. Unclip or unscrew the old idler pulley assembly from its mounting bracket. Install the new 691366 idler pulley in the same position. Re-route the belt around the drum (ribbed side in), under the idler pulley, and around the motor pulley, then release the idler arm to create tension. Reassemble the front and top panels, restore power, and run a test cycle. Tip: while the dryer is open, inspect and replace the drum belt (341241) and drum support rollers (349241T) if worn. Tools needed: Phillips screwdriver, 1/4" or 5/16" nut driver, putty knife.
Frequently Asked Questions
What does the idler pulley do?
The idler pulley is a spring-loaded arm and wheel assembly that presses against the drive belt between the drum and the motor pulley, keeping the belt under constant tension. This tension is what allows the belt to grip both the drum and the motor pulley without slipping as the motor spins. Without proper tension — or with a pulley bearing that has failed — the belt slips, the drum stops spinning, and the dryer produces heat but does not tumble clothes. A worn bearing also creates the high-pitched squealing sound that is the most common sign of idler pulley failure.
What is the difference between 691366 and WP691366?
These are the same idler pulley assembly. WP691366 is the updated Whirlpool OEM part number that superseded the original 691366. The W10612905 is also a cross-reference for the same assembly. This aftermarket replacement is compatible with all three numbers.
What is the difference between 691366 and W10837240?
Both are Whirlpool dryer idler pulley assemblies, but for different dryer generations. The 691366 (WP691366) is used on older Whirlpool-family dryers with the lint filter on top of the dryer. The W10837240 is a larger, redesigned idler arm and bracket assembly used on newer Whirlpool-family dryers with the lint screen inside the door. They are not interchangeable. Always verify your model number to confirm which idler pulley is correct for your dryer.
Should I also replace the belt and drum rollers at the same time?
Yes — since the dryer must be disassembled to replace the idler pulley, this is the ideal time to also inspect and replace the drum belt (341241) and rear drum support rollers (349241T). All three parts are part of the same drum drive system and wear at similar rates. The 4392065 maintenance kit includes all three together and is the recommended approach for a complete drum drive repair — one teardown covers everything.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal with a ball-bearing pulley wheel to match the dimensions and performance of the original WP691366 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
ERP W10185981 Dryer Timer – Replaces WPW10185981 – Compatible with Whirlpool, Kenmore, Maytag, Estate, and Roper Dryers
Product Description
Restore accurate dryer cycle timing with the ERP W10185981 Dryer Timer. This high-quality replacement controls the duration of drying, auto-sense, and cooldown cycles. It is responsible for controlling and managing the timing and sequence of the various drying cycles and functions. A failing timer may cause the dryer to stop mid-cycle, run too long, not start, or remain stuck on one setting. Replacing it with this reliable ERP timer ensures smooth, consistent cycle operation at a cost-effective price.
Replaces Part Numbers
WPW10185981, W10185981, 1481704, 418-095-20-B5, PD00004725, EAP11749830, AP6016540, PS11749830.
Compatibility
This replacement dryer timer fits select Whirlpool, Kenmore, Maytag, Amana, Estate, Roper, and Crosley dryers.
Example compatible models include (but are not limited to):Whirlpool WED5300SQ0, Kenmore 110.65132411, Maytag MEDC200XW1, Estate EED4400WQ0.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM timing accuracy and electrical performance
⏱️ Restores Cycle Control – Regulates drying, auto-sense, and cooldown cycles
💰 Cost-Effective Alternative – Reliable performance without OEM pricing
🛠️ Direct-Fit Installation – Plug-in wiring harness and standard mounting
🛡️ Fixes Common Issues – Solves timer not advancing, dryer not starting, or cycles running too long
📐 Product Specification
Part Number: W10185981
Component Type: Dryer Cycle Timer
Material: Reinforced polymer housing with internal metal timing mechanism
Mounting: Installs behind control panel
Electrical Rating: Matches OEM specifications
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear control panel cover.
Unplug the wiring harness from the old timer.
Remove mounting screws and take out the old timer.
Install the new ERP W10185981 timer in the same orientation.
Reconnect wiring, reinstall the panel, and restore power.
Test dryer cycles for proper operation.
⏱️ Time Required: 10–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore accurate dryer timing — Add to Cart Now for a dependable, budget-friendly repair!
134371220CM Washer Water Valve
Replaces Part Numbers: 134371220, WH13X10030, 1154728, AH1145692, EA1145692, OEM11533292, AP3844429, PS1145692.
Description: This Water Inlet Valve is a replacement part for specific Frigidaire washing machine models. This part controls the flow of hot and cold water into the washer's tub, ensuring the correct temperature mix for various wash cycles. By opening and closing at the command of the washer's control system, it plays a pivotal role in the machine's ability to execute programmed wash cycles with precision, affecting everything from the initial fill to the rinse phases. Causes for the replacement of the water inlet valve can range from mineral deposits and sediment build-up, which can obstruct the valve's flow, to mechanical wear and electrical failures affecting the valve's operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC93-00634A Dryer Idler Pulley
The XPARTCO DC93-00634A is an aftermarket replacement idler pulley assembly compatible with a wide range of Samsung dryers. The idler pulley rides against the drive belt and keeps it under proper tension as it wraps around the drum and motor pulley. Over time, the pulley wheel can wear, crack, or seize on its shaft, or the spring-loaded tensioner arm can bend or break, causing the belt to lose tension.
When this part fails, the dryer commonly won't spin at all even though the motor runs, makes a loud noise from the drive area, or the belt goes slack and starts slipping. It directly replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Installs in 30 minutes to 2 hours depending on how much disassembly your model requires.
Quick Answer
The XPARTCO DC93-00634A Dryer Idler Pulley fixes Samsung dryers that won't spin the drum even though the motor runs, make a loud noise from the drive belt area, or have a loose/slipping belt. Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Classic symptom: motor hums and runs, but the drum doesn't turn — "no spin, no start."
Common Problems This Part Fixes
Dryer motor runs but the drum doesn't spin ("no spin, no start")
Loud noise or rattling coming from the drive belt/motor area
Drive belt slipping, loose, or off-track
Visible cracks, wear, or seizing on the pulley wheel
Bent or broken tensioner arm/spring
Squeaking noise from the pulley as it rotates
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This idler pulley directly replaces the following OEM and cross-reference part numbers:
DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with a wide range of Samsung dryers, including:
Samsung DV337AEG/XAA-0000
Samsung DV45H7000EW/A2-0000
Samsung DV45K6200EZ/A3
Samsung DV203AEW/XAA-0000, DV203AGS, and related models
Note: This idler pulley is specific to the Samsung drive belt platform and does not fit LG, Whirlpool, GE, or other brands, which use different pulley designs. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement Samsung dryer idler pulley assembly
Resolves "no spin, no start," "loud noise," and "loose/slipping belt" symptoms
Maintains proper belt tension as the belt wraps around the drum and motor pulley
Spring-loaded tensioner arm matches original design for correct belt tension
Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
Compatible with a wide range of Samsung dryer models
Aftermarket replacement built to OEM-equivalent quality standards
Exact-fit design — no modification needed for installation
Product Specifications
Part Number
XPDC93-00634A
OEM Part Number
DC93-00634A
Part Type
Dryer Idler Pulley Assembly
Condition
Aftermarket Replacement
Function
Maintains drive belt tension
Application
Samsung Dryer Drive Belt System
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Remove the front panel and/or top panel as needed to access the drum and drive belt (access point varies by model). Photograph the belt routing before removing anything. Relieve tension on the drive belt by pressing the idler pulley toward the motor, then slip the belt off the pulley and motor shaft. Remove the mounting screw or clip holding the idler pulley bracket in place and remove the old pulley assembly. Install the new DC93-00634A pulley in the same position and secure it. Route the new belt back around the drum and motor pulley, using the idler pulley to apply tension, matching your photos of the original routing. Reassemble any panels removed for access, restore power, and run a test cycle to confirm the drum spins smoothly and quietly. Tools needed: Phillips or nut driver, putty knife (for panel clips, if applicable).
Frequently Asked Questions
My dryer's motor runs but the drum won't spin — is this the part?
This is the classic "no spin, no start" symptom of a failed idler pulley or a broken drive belt. If the pulley wheel is cracked, seized, or the tensioner arm is bent or broken, the belt loses tension and can no longer transfer power from the motor to the drum. Inspect the belt for damage as well, since a broken belt often accompanies a worn idler pulley.
Do I need to replace the drive belt at the same time?
Not necessarily, but it's worth inspecting closely while you have the drum accessible. If the idler pulley failed due to age or wear, the belt has often experienced similar stress and may be worn, glazed, or close to failing itself. Many technicians replace both together to avoid a repeat repair.
Will this fit my LG or Whirlpool dryer?
No — this idler pulley is specific to the Samsung drive belt platform. LG, Whirlpool, GE, and other brands use different idler pulley and belt tensioning designs that are not interchangeable with this part. Confirm your appliance model number before ordering.
How long does this repair typically take?
Most installers report 30 minutes to 2 hours depending on how much disassembly your specific model requires to access the belt and pulley. Front panel removal is usually the more time-consuming part; the pulley swap itself is quick once accessed.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
🚪 XPARTCO 131658800 Dryer Door Catch
This Door Catch is a replacement part for specific Kenmore, Frigidaire dryer models. It includes the door catch. This part ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently. Common causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.
Fix a loose or non-latching dryer door with this aftermarket replacement for part number 131658800. This dryer door catch holds the dryer door securely closed during operation to ensure proper airflow and drying performance. Designed to fit many Frigidaire, Kenmore, Electrolux, and Crosley dryers.
✅ Key Features:
High-quality aftermarket replacement for part #131658800
Made from durable plastic for long-lasting use
Designed to securely latch the door shut
Simple snap-in installation — no tools required
Helps prevent cycle interruption due to door opening
🔁 Replaces OEM Part Numbers:
131658800, 131658820, 131658845, 00634863, 07521419, 08015370, 134548000, 134548045, 3004967, 3202755, 3281055, 5303281055, 5307521419, 7521419, 835, AH418433, EA418433, F141735-000, F141735000, F62661-4, K1300884, K1301594, K1308079, K1309301, N8010215, Q0000401002, Q000504551, Q000504553, Q504551, Q504553, WQ504551, WQ504553, AP2107362, PS418433, WE01X25316, AP6037347, 4512762, PS11766999.
⚠️ Common Symptoms Fixed:
Dryer door won’t stay closed
Dryer won’t start due to open door switch
Door pops open during a cycle
Visible wear or damage to original catch
🧰 Compatible Brands:
✔️ Frigidaire✔️ Electrolux✔️ Kenmore (Frigidaire-built)✔️ Gibson✔️ Tappan✔️ Crosley✔️ White-Westinghouse
📌 Need help verifying compatibility? Send us your dryer’s model number — we’ll check it for you.
🚚 Why Buy from Parts-O-Matic?
✅ Reliable aftermarket performance
✅ Always Fast and Free U.S. shipping
✅ Easy DIY repair with trusted support
✅ Backed by excellent customer service
🛒 Fix your dryer’s latching issue today — order the 131658800 dryer door catch from Parts-O-Matic.com, and enjoy fast, free U.S. shipping!
WD19X25278 Dishwasher Genuine OEM Diverter Assembly
Replaces Part Numbers: WD19X25278, WD18X21678, 4922277, WD00X25260, AP6871922, PS12710077.
Description: This Diverter Valve Assembly Kit serves a Genuine OEM replacement Part for specific GE dishwasher models. Its key function is to provide an alternative passage for water to reach the upper spray arms of the dishwasher. A faulty or damaged diverter valve often manifests as water leaks within the dishwasher. When such leaks occur and can be traced back to the diverter valve, this assembly kit offers a comprehensive solution. It includes all necessary components and fasteners to efficiently replace the valve. This kit is suitable for use with specific General Electric dishwasher models.
XPARTCO 316233903 Oven Temperature Sensor
The XPARTCO 316233903 is an aftermarket replacement oven temperature sensor (probe), made to replace Frigidaire part 316233903, for select Frigidaire, Kenmore, Tappan, Crosley and White-Westinghouse gas and electric ranges. The sensor constantly monitors the temperature inside the oven and sends signals to the control board, which uses them to hold the set temperature for baking, roasting and broiling. When it fails, the oven may not heat properly, may not hold temperature, or may run too hot.
This is an aftermarket replacement from XPARTCO, not a genuine Frigidaire part. It is sold individually. Check your model number before ordering, and compare the sensor's plug with your old one, because connectors can differ.
Quick Answer
The XPARTCO 316233903 Oven Temperature Sensor replaces the oven sensor probe on a compatible range when it has failed. Replaces 316217008, 316233900 and 316233902. Classic symptoms: little or no heat when baking, uneven heating, an oven that runs too hot, or an oven that won't start.
Common Problems This Part Fixes
Little or no heat when baking
Oven not heating evenly
Oven running too hot
Oven won't start
Inaccurate oven temperature
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This oven temperature sensor is made to replace the following Frigidaire part numbers:
316233903, 316217008, 316233902, 316233900, AFR16108, AP5998652, OEM17995965, PD00027614, PS11731754
If your old sensor shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This oven temperature sensor is listed for Frigidaire, Kenmore, Tappan, Crosley and White-Westinghouse gas and electric ranges, including these examples:
Frigidaire CFEF3043RSD, CFEF3043RSC, CWEF3007TWB, FFLF3049SSB, FFGF3052TSA, TGF328GSF
Crosley CRG3150SSA, CRG3150SSB, CCRE3530LWG
White-Westinghouse WWEF3001TWA, WWGF3008TWA, WWGF3008TWB
Kenmore 79073033314, 79073033315, 79073033316, 79061750100
Note: The models above are a sample, not a full list. This sensor may require cutting and splicing the wire connector, and some buyers report that the plug on their range did not match, so compare it with your old sensor. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the Frigidaire 316233903 oven temperature sensor
Monitors oven temperature and signals the control board
Cross-references three earlier Frigidaire sensor part numbers
Sold individually
Product Specifications
Part Number
XP316233903
OEM Part Number
316233903
Part Type
Oven Temperature Sensor (Probe)
Condition
Aftermarket Replacement
Quantity
1 Sensor
Application
Select Gas and Electric Ranges
Installation Notes
⚠️ Disconnect Power Before Installing Unplug the range or shut off its circuit breaker, let the oven cool, and wear work gloves. Pull the range out to reach the back panel, remove the panel, then unscrew the old sensor and disconnect its wiring. Mount the new sensor in the same position and reconnect the wiring. Note: this sensor may require cutting and splicing the wire connector. If the plug differs from your old one, cut the connector and splice the wires with porcelain wire nuts. Refit the panel, restore power, and check oven temperature accuracy.
Frequently Asked Questions
My oven isn't heating right. Is the sensor the problem?
It can be, but not always. Some customers found the real fault was the igniter, bake element or control board. Test the sensor and check those parts before replacing it.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace Frigidaire part 316233903. If you specifically need a genuine Frigidaire part, contact our support team.
Will I need to cut and splice the wire connector?
Yes, it may. This sensor may require cutting and splicing the wire connector, depending on your range. Compare your old sensor with this one before ordering. Customers have spliced the wires with porcelain wire nuts when the plug differed. Contact our support team if you are unsure.
Will this fit my range?
It is listed for many Frigidaire-built models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 53-1096 Gas Dryer Thermostat - Compatible with Maytag, Amana, Magic Chef, Jenn-Air Dryers
Product Description
Keep your gas dryer safe and operational with the replacement 53-1096 Gas Dryer Thermostat. This high-limit thermostat is designed for select Maytag, Amana, Magic Chef, and Jenn-Air gas dryers, preventing overheating by shutting off the burner at 240°F and restarting at 200°F. It addresses issues like no heat, overheating, or premature shutoff, offering a cost-effective alternative to OEM parts.
Note: Includes one high-limit thermostat. Disconnect power and gas supply before installation. Often paired with thermal fuses (e.g., 53-1182, 53-0771) for comprehensive repairs.
Replaces part numbers: WP53-1096, 53-1096, PD00055179, AP6009640, PS11742808.
Compatibility:
Compatible with models including but not limited to:
Maytag: DG312, DG612, DG712, LDG7304AAL, LDG8604AAL, MDE3000AYW
Amana: NGD7200TW10, 4GNED4400YQ2
Magic Chef: CYG1005AXX, CYG2000AWW
Jenn-Air: JDE1000W, JDG1000W
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Maytag, Amana, Magic Chef, Jenn-Air, Norge, Admiral, and Crosley gas dryers.
🔥 Specifications: replacement high-limit thermostat, opens at 248°F, closes at 200°F, 25A at 240VAC.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes.
🛡️ Effective Fixes: Resolves no heat, overheating, or premature shutoff issues.
Product Specification
Part Number: 53-1096
Component Type: High-limit thermostat
Material: Metal and plastic
Mounting: Two 1/4" male spade terminals, includes mounting bracket
Operating Conditions: Suitable for high-temperature gas dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source and gas supply before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today!
Add to cart now for a budget-friendly fix!
XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat
The XPARTCO 6931EL3001F is an aftermarket replacement dryer rear hi-limit heater thermostat compatible with select LG and Kenmore electric and gas dryers. The hi-limit thermostat is a safety switch mounted on the heater housing that monitors the temperature at the heating element. If the heater temperature exceeds the safe operating limit, the thermostat opens its contacts to cut power to the heating element, protecting the dryer and its contents from overheating. When cooled, the thermostat resets automatically — but if it fails internally, it may remain open permanently, causing the dryer to produce no heat despite the thermal fuse and other components being intact.
Rated L125-31C, 250V, 25A, this 3-terminal thermostat measures 2"L x 1-3/4"W x 1-1/4"H with approximately 1-5/8" between mounting holes (center to center). It is constructed from metal and plastic in gray/black and mounts directly on the heater housing. It directly replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482, and PD00023316. Often replaced together with the 6931EL3003D thermal fuse — both mount on the heater housing and work as a system to protect the dryer from overheating. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat fixes LG and Kenmore dryers with no heat where the thermostat has failed open. Rated L125-31C, 250V/25A, 3 terminals. 2"L x 1-3/4"W x 1-1/4"H, ~1-5/8" between mounting holes. Mounts on heater housing. Test with multimeter — should show closed continuity at room temperature. Often replaced together with 6931EL3003D thermal fuse. Replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482.
Common Problems This Part Fixes
Dryer produces no heat — hi-limit thermostat has failed open and is permanently interrupting the heater circuit
Dryer takes much longer than normal to dry a load
Dryer tumbles normally but generates no heat during the cycle
No heat even after the thermal fuse has already been replaced — thermostat also failed
Dryer overheating intermittently — thermostat not opening at the correct temperature
Multimeter test shows open circuit (no continuity) across the thermostat at room temperature
Replaces Part Numbers
This hi-limit thermostat directly replaces the following OEM and cross-reference part numbers:
6931EL3001F, 1377779, AH3530482, ALG51960, EA3530482, EAP3530482, AP5072172, PD00023316, PS3530482
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This hi-limit thermostat is compatible with select LG and Kenmore electric and gas dryers. Compatible models include LG DLE, DLG, DLEX, DLGX, and DLB series dryers, and Kenmore 796-series dryers built on the LG platform.
LG electric dryers — DLE series (DLE2050W, DLE3777W, DLE5955W and related models)
LG electric dryers — DLEX series (select models)
LG gas dryers — DLG series (DLG2051W, DLG3788W and related models)
LG gas dryers — DLGX series (select models)
LG electric and gas dryers — DLB series (select models)
Kenmore / Sears dryers — 796-series (LG-built models)
Tip: When replacing the 6931EL3001F thermostat, also replace the 6931EL3003D thermal fuse at the same time. Both mount on the heater housing and are commonly replaced together — an overheating event that causes one to fail typically stresses both.
Key Features
Hi-limit heater thermostat — safety switch that cuts power to the heating element if heater temperature exceeds safe limits
Auto-resets when cooled — but a failed thermostat that remains open causes permanent no-heat
Rated L125-31C, 250V, 25A — correct specifications for compatible LG and Kenmore dryers
3-terminal design — matches the original wiring configuration on compatible heater housings
Dimensions: 2"L x 1-3/4"W x 1-1/4"H; ~1-5/8" between mounting holes (center to center)
Metal and plastic construction (gray/black) — heat-resistant materials for heater housing application
Mounts directly on the heater housing — accessible from the dryer back panel
Often replaced together with 6931EL3003D thermal fuse for a complete heater housing thermal repair
Test with multimeter before replacing — should show closed continuity at room temperature
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
6931EL3001F
Part Type
Dryer Rear Hi-Limit Heater Thermostat
Condition
Aftermarket Replacement
Application
LG and Kenmore Electric and Gas Dryers
Thermostat Rating
L125-31C — auto-resets after cooling
Voltage
250V
Amperage
25A
Terminals
3-terminal
Dimensions
2"L x 1-3/4"W x 1-1/4"H
Mounting Hole Spacing
Approx. 1-5/8" center to center
Color
Gray / Black
Material
Metal / Plastic
Location
Heater housing (rear of dryer)
Normal Behavior
Closed continuity at room temperature
Often Replaced With
6931EL3003D Thermal Fuse
Compatible Brands
LG, Kenmore (LG-built)
Installation Notes
⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer by unscrewing the perimeter screws to access the heater housing. The 6931EL3001F thermostat is mounted on the heater housing — it is the 3-terminal component with gray/black housing. Before removing it, test it with a multimeter: disconnect the wires and probe the terminals. At room temperature a working thermostat shows closed continuity. An open reading confirms failure. Photograph the 3-wire connections before disconnecting — reconnecting in the correct positions is important. Remove the 2 mounting screws and lift the old thermostat off. Install the new thermostat in the same position with the 2 mounting screws and reconnect the wires in the same positions. While the heater housing is accessible, also test and replace the 6931EL3003D thermal fuse if needed. Reinstall the back panel, restore power, and run a test heat cycle. Tools needed: Phillips screwdriver, multimeter.
Frequently Asked Questions
What is the difference between the 6931EL3001F thermostat and the 6931EL3003D thermal fuse?
Both are mounted on the heater housing and protect the dryer from overheating, but they work differently. The 6931EL3001F is a resettable hi-limit thermostat rated L125-31C — it opens when the heater temperature gets too high and resets automatically when cooled. The 6931EL3003D is a one-time thermal fuse that permanently interrupts the circuit if the temperature exceeds its rated limit — once blown, it cannot reset and must be replaced. Both should show closed continuity at room temperature when working. Because both are on the heater housing and experience the same thermal stress, replacing both at the same time is recommended.
How do I test the 6931EL3001F thermostat with a multimeter?
Unplug the dryer and disconnect all three wires from the thermostat terminals. Set your multimeter to continuity or resistance mode. At room temperature, a working 6931EL3001F thermostat should show closed continuity (near-zero resistance) across its contacts. If your multimeter reads open circuit (no continuity / OL), the thermostat has failed and needs replacement. Since this thermostat auto-resets when cooled, always test at room temperature — testing while the dryer is still warm may give a false open reading if the thermostat has legitimately opened due to heat.
My LG dryer has no heat but the thermal fuse is good — could it be the thermostat?
Yes — when the thermal fuse tests good but there is still no heat, the hi-limit thermostat (6931EL3001F) is the next most common culprit. A thermostat that has failed internally may remain permanently open even at room temperature, cutting power to the heating element exactly as a blown thermal fuse would. Test the thermostat with a multimeter for continuity. Also check the cycling thermostat (6931EL3002M) and the thermistor (6323EL2001B) — all three are part of the LG dryer thermal control system and any one of them can cause a no-heat condition.
What does the "L125-31C" rating mean?
The L125-31C rating describes the thermostat's operating parameters. L125 means the thermostat opens (trips) when the temperature reaches approximately 125°C (257°F). The 31 indicates the reset differential — the thermostat resets when the temperature drops approximately 31°C below the trip point, around 94°C (201°F). This rating ensures the thermostat allows the heater to operate at normal drying temperatures while protecting against dangerous overheating.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from metal and plastic to match the L125-31C rating, dimensions, and 3-terminal configuration of the original 6931EL3001F hi-limit heater thermostat.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WB03X24818CM Range Control Knob
Burner Knob.
Fits specific GE Gas Range models.
Replaces Part Numbers: WB03X24818, AP5989029, PS11729081.
Description: This Range Knob is a replacement part for specific GE ranges and oven models. It is used to control the temperature and settings of the stove's burners or oven functions, providing an interface for selecting heat levels and cooking modes.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WB26X10038 Microwave Turntable Motor
The XPARTCO WB26X10038 is an aftermarket replacement turntable motor compatible with a wide range of GE, Hotpoint, RCA, Kenmore/Sears, and Frigidaire microwaves. This small synchronous motor mounts beneath the microwave cavity floor and spins the glass turntable so food cooks and heats evenly under the magnetron. When the motor wears out or its internal gears strip, the turntable stops rotating, rotates unevenly, or starts making a grinding or clicking noise as it struggles to turn.
It's built with a D-shaped 1/4" metal drive shaft and two 3/16" male spade terminals matching the original connector, so it swaps in as a direct plug-and-play replacement. It directly replaces WB26X10038, 769741, ST16F, SM16F, SSM-16H, 15QBP1017, AGE21998, AH237772, AP2024962, EA237772, OEM6074895, PD00001126, PS237772, 5304408980, 639447, AH471476, EA471476, OEM6453786, AFR80909, AP2151259, PS471476, DE31-10172A. Installs in 5–10 minutes with basic hand tools.
Quick Answer
The XPARTCO WB26X10038 Microwave Turntable Motor fixes GE, Hotpoint, RCA, Kenmore/Sears, and Frigidaire microwaves with a turntable that won't turn, turns unevenly, or grinds/clicks while trying to rotate. 21V AC, 50/60Hz, 2.5–3 RPM, 3.0W, D-shaped 1/4" metal shaft, two 3/16" male spade terminals. Replaces WB26X10038, 769741, ST16F, SM16F, SSM-16H, 15QBP1017, AGE21998, AH237772, AP2024962, EA237772, OEM6074895, PD00001126, PS237772, 5304408980, 639447, AH471476, EA471476, OEM6453786, AFR80909, AP2151259, PS471476, DE31-10172A. Classic symptom: microwave heats fine, but the glass tray sits still or turns only partway.
Common Problems This Part Fixes
Turntable doesn't rotate at all, even though the microwave heats normally
Turntable turns partway then stalls or reverses
Grinding, clicking, or straining noise coming from under the cavity floor
Uneven cooking or hot/cold spots caused by the tray not rotating
Turntable coupler or drive hub spins but the glass tray doesn't move
Intermittent rotation that works sometimes and not others
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This turntable motor directly replaces the following OEM and cross-reference part numbers:
WB26X10038, 769741, ST16F, SM16F, SSM-16H, 15QBP1017, MDPJ030AF, AGE21998, AH237772, AP2024962, EA237772, OEM6074895, PD00001126, PS237772, 5304408980, 639447, AH471476, EA471476, OEM6453786, AFR80909, AP2151259, PS471476, DE31-10172A, MDPJ030AF
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This turntable motor is compatible with a wide range of microwaves from the following brands:
GE microwaves (JVM, DVM, EMO, and CGLMV series)
Hotpoint microwaves (GE-built models)
RCA microwaves (GE-built models)
Kenmore and Sears microwaves (363- and 721-prefix model numbers)
Frigidaire microwaves (select models sharing this motor design)
Note: This motor spans both GE-built and Frigidaire microwave platforms — a cross-brand fitment worth confirming against your specific model number, since not every model on either platform uses this exact motor. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement microwave turntable motor with D-shaped 1/4" metal drive shaft
Resolves "won't rotate," "grinding noise," and "uneven cooking" symptoms caused by motor failure
21V AC, 50/60Hz synchronous motor rated for 2.5–3 RPM output
3.0W power draw matching original electrical specifications
Two 3/16" male spade terminals for a secure plug-and-play connection
CW/CCW rotation capable to match your original motor's turning direction
Replaces WB26X10038, 769741, ST16F, SM16F, SSM-16H, 15QBP1017, AGE21998, AH237772, AP2024962, EA237772, OEM6074895, PD00001126, PS237772, 5304408980, 639447, AH471476, EA471476, OEM6453786, AFR80909, AP2151259, PS471476, DE31-10172AXP, and several additional cross-reference numbers
Compatible with GE, Hotpoint, RCA, Kenmore/Sears, and Frigidaire microwaves
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWB26X10038
OEM Part Number
WB26X10038
Part Type
Microwave Turntable Drive Motor
Condition
Aftermarket Replacement
Voltage
21V AC
Frequency
50/60 Hz
Speed
2.5–3 RPM
Power
3.0W
Shaft Type
D-shaped metal, 1/4"
Diameter
~2 inches
Terminals
Two 3/16" male spade connectors
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Sears, Frigidaire
Installation Notes
⚠️ Unplug Microwave Before Starting Disconnect power at the outlet. For over-the-range or built-in units, most turntable motors are accessed from inside the cavity by removing the drive coupler and roller guide, then reaching the motor from underneath the cavity floor (may require removing the microwave from its mount or accessing from the bottom/rear panel, depending on model). Photograph the wiring before disconnecting. Unplug the two spade terminal connectors from the old motor. Remove the mounting screws holding the motor bracket in place and remove the old motor. Install the new WB26X10038 motor in the same position and secure the mounting screws. Reconnect the spade terminals, matching your photos (polarity typically doesn't matter on these motors, but match original wire colors when in doubt). Reinstall the drive coupler and roller guide, reassemble any panels, restore power, and test that the turntable rotates smoothly and consistently. Tools needed: Phillips screwdriver, nut driver.
Frequently Asked Questions
My microwave heats food fine, but the turntable doesn't spin — is this the part?
Yes, this is the classic symptom of a failed turntable motor. The heating function (magnetron, high-voltage components) is a completely separate system from the turntable drive, so a microwave can heat normally while the turntable motor has failed. Before ordering, also check that the glass tray and roller guide are seated correctly, since a stuck tray can sometimes be mistaken for a motor failure.
Will this fit both GE and Frigidaire microwaves?
This motor design is shared across select GE-built and Frigidaire microwave models, but not every model on either platform uses it. Confirm fit using your microwave's exact model number before ordering rather than assuming by brand alone.
Do I need to transfer the drive coupler from my old motor?
The drive coupler (the plastic piece that connects the motor shaft to the turntable support) is typically a separate component that sits on top of the motor shaft rather than being permanently attached, so you'll generally reuse your existing coupler and roller guide with the new motor unless they're visibly worn or damaged.
Why is my turntable turning slowly or grinding instead of stopping completely?
This usually means the motor's internal gears are stripped or worn rather than the motor being fully dead — it's still trying to turn but can't do so smoothly. This is a sign the motor needs replacement even if it hasn't failed outright yet.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WE04X25198 Dryer Genuine OEM Thermostat
Fits Specific GE Dryer Models.
Replaces Part Numbers: WE04X25198, 4467032, AP6024634, PS11736631.
Description: This Thermostat is a Genuine OEM component specifically designed for specific GE laundry machine models. It is a heat-sensing component that monitors and regulates air temperatures inside the dryer drum. Precise thermostat functioning ensures proper drying temperatures are reached and maintained for optimal performance.
