Search results for "washer gasket"

XPARTCO DE60-20066A Microwave Mounting Flat Bolt The XPARTCO DE60-20066A is an aftermarket replacement mounting flat bolt for over-the-range microwaves, including Samsung and Maytag microwave and hood combinations. The flat bolt is the long mounting bolt that holds the microwave in place. If the original is stripped, damaged, or missing, the microwave may no longer stay securely mounted. This bolt also replaces the GE WB01X10180 flat cab mounting bolt. Because it holds a heavy appliance in place, match it to the bolt you are replacing and make sure the microwave is properly supported while you work. Quick Answer The XPARTCO DE60-20066A Mounting Flat Bolt replaces a stripped, damaged, or missing mounting bolt on an over-the-range microwave. Replaces Samsung DE60-20066A and GE WB01X10180. Classic symptom: the microwave is loose on its mounting bracket, or one of the mounting bolts is stripped or missing. Common Problems This Part Fixes Stripped mounting bolt Missing mounting bolt after the microwave was removed or moved Microwave loose or not held securely against its mounting bracket Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This mounting flat bolt directly replaces the following part numbers: DE60-20066A, ASM36399, AP4219712, OEM12659145, EAP4226718, PD00024313, PS4226718, WB01X10180, WB1X10180, AP3205964, AGE20652, AH651196, EA651196, OEM9617901, 942461, PD00035893, PS651196 DE60-20066A is the Samsung number and WB01X10180 is the GE number. Confirm against your microwave's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This bolt is listed for Samsung and Maytag over-the-range microwaves under DE60-20066A, and for GE, Hotpoint, and Kenmore microwaves under WB01X10180, including these examples: Samsung ME18H704SFS/AA-00, ME17R7021ES/AA-00, SMH1816S/XAA-00, SMH9151ST/XAA-00 Maytag MMV1153BAS, MMV5165BAS, UMV1152CAS GE CVM2072SM1SS, DVM1850DM2WW, DVM1850DM4BB Kenmore 36362702200, 36362709200 Note: The models above are a small sample of longer lists, not full lists. Compare your old bolt's length and head style to this bolt, and contact our support team with your model number to verify fit before ordering. Key Features Aftermarket replacement mounting flat bolt for over-the-range microwaves Replaces Samsung DE60-20066A and GE WB01X10180 Approximately 4 inches long Restores a secure mount when the original bolt is stripped or missing Product Specifications Part Number XPDE60-20066A OEM Part Number DE60-20066A, WB01X10180 Part Type Microwave Mounting Flat Bolt Condition Aftermarket Replacement Length Approx. 4 Inches Application Over-the-Range Microwaves (Samsung, Maytag, GE, Hotpoint, Kenmore) Installation Notes ⚠️ Unplug Power And Support The Microwave Unplug the microwave before beginning, and wear work gloves. An over-the-range microwave is heavy, so have a helper support it, or support it from below, while you remove or loosen any fasteners. Follow your model's installation guide. In general, you remove the screws covering the mounting bolts, loosen the mounting bracket screws, replace the old bolt with the new one, then reattach the bracket and cover screws. Return the microwave to position, make sure it is firmly seated and secure, and reconnect power. Frequently Asked Questions My microwave is loose on its mount. Is this the part I need? If a mounting bolt is stripped, damaged, or missing, replacing it is the usual fix. Check the bracket and the other fasteners too, and do not rely on a microwave that is not securely mounted. Is DE60-20066A the same as WB01X10180? DE60-20066A is the Samsung number and WB01X10180 is the GE number. This bolt is listed as a replacement for both. Compare it to your old bolt, or contact our support team with your model number, before ordering. How many bolts come in this order? Retailers list the equivalent GE bolt as sold individually, but do not state a pack count for every listing. Contact our support team if you need to confirm the quantity. Will this fit my microwave? It is listed for many over-the-range microwaves, but the model lists above are only samples. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

PK136277-2 Lower Dishrack Roller and Axle Set Pack of 2 Replaces: WD12X10136,  WD12X10277   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WPW10545291 Genuine OEM Whirlpool Range / Oven Thermal Fuse The WPW10545291 is a genuine Whirlpool OEM thermal fuse mounted next to the heating source inside wall ovens, ranges, and microwave-oven combo units. This fuse is a one-time safety device: as long as the oven stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb high enough — most often during a self-clean cycle, which runs far hotter than normal baking or roasting — the fuse permanently opens the circuit and cuts power. That's why a blown thermal fuse produces such a distinctive symptom: the oven loses power completely, sometimes with the door still electronically locked from the self-clean cycle that triggered the failure. Unlike a thermostat, this thermal fuse cannot be reset once it blows — it must be replaced. Because it's mounted directly behind the control panel on many wall oven models, replacing it typically means pulling the unit partway out from the wall and removing the control section to reach it, rather than a simple rear-panel swap. It directly replaces AP6022803, W10545291, 3021646, PS11756140, PS7783661, and W10436435. Quick Answer The WPW10545291 Genuine OEM Whirlpool Range / Oven Thermal Fuse fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore wall ovens, ranges, and microwave-oven combos that lost power completely — often right after a self-clean cycle. Replaces AP6022803, W10545291, 3021646, PS11756140, PS7783661, W10436435. If the door is electronically locked and won't open, you may need to manually release the lock before you can access the oven for this repair — see the FAQ below. Common Problems This Part Fixes Oven has no power at all — no lights, no display, no response to any button Oven lost power suddenly, especially during or right after a self-clean cycle Oven door remains electronically locked with no power to release it Oven that stopped working after running unusually hot Control panel completely dark and unresponsive Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This range/oven thermal fuse directly replaces the following OEM and cross-reference part numbers: WPW10545291, W10545291, 3021646, W10436435, AP6022803, AWP50815, EAP11756140, PD00032820, PS11756140. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermal fuse is compatible with select Whirlpool wall ovens, ranges, and microwave-oven combo units, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances built on the Whirlpool platform, including model numbers such as WOD77EC7HS, WOD77EC0HV, and WOD51EC7AB02. Note: Whirlpool uses several different thermal fuses across its range/oven lineup, including separate fuse designs used in other model families. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM part — factory-specified opening temperature and terminal configuration One-time safety device that cuts power if the oven overheats Resolves "no power at all," "lost power after self-clean," and "door locked with no power" symptoms caused by a blown fuse Mounts next to the heating source, typically behind the control panel Replaces AP6022803, W10545291, 3021646, PS11756140, PS7783661, and W10436435 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore wall ovens, ranges, and microwave-oven combos Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WPW10545291 Part Type Range / Wall Oven Thermal Fuse Condition Genuine OEM Brand Whirlpool Application Wall Ovens, Ranges, Microwave-Oven Combo Units Location Next to the heating source, typically behind the control panel Resettable No — one-time use, must be replaced once blown Repair Difficulty Moderate to Hard — control panel disassembly required on many models Quantity 1 thermal fuse Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Oven Or Shut Off Breaker Before Starting — Access Is Typically Behind The Control Panel Shut off the oven's power at the breaker before beginning. Wear work gloves. If the door is electronically locked and won't open due to the power loss, you may need to manually release it first — see the FAQ below for a common workaround. Remove the oven's retaining screws and carefully pull the unit out from the wall a few inches to access the screws holding the control section in place. Remove the screws securing the control panel — typically four — and pull the control unit loose, letting the display ribbon cable stay connected while you rest the panel out of the way on top of the oven; avoid pulling it further than the ribbon allows. The thermal fuse is usually mounted right behind the control panel at this point. Photograph the wiring before disconnecting the old fuse's connectors. Pull the connectors off the old fuse and plug them onto the new WPW10545291 fuse in the same orientation. Reconnect the control panel's ground wire and ribbon cable, reinstall the control panel and its screws, and carefully push the oven back into the wall opening, securing it with its retaining screws. Restore power at the breaker and confirm the oven powers on normally and the door unlocks and operates correctly. Tools needed: Phillips screwdriver, power tester (helpful), work gloves. Frequently Asked Questions My oven lost all power right after a self-clean cycle. Is this the thermal fuse? Yes, this is one of the most common and well-documented triggers for this exact failure. Self-clean cycles run at extremely high temperatures compared to normal cooking, and if that heat exceeds what the thermal fuse is rated to tolerate, it blows to protect the oven — cutting all power in the process. A total loss of power during or shortly after a self-clean cycle is a strong sign this fuse is the cause. My oven door is locked and I have no power to release it. How do I get it open? This is a known complication when the thermal fuse blows during or after a self-clean cycle, since the door lock can remain engaged with no power available to release it electronically. One documented workaround: with the house power to the oven confirmed off, some owners have used a thin, flexible material (such as a bent paper clip or a flexible cutting board edge) worked carefully between the door and the lock mechanism to manually trip the lock open. This varies by model and takes patience — if you're not comfortable attempting it, a qualified appliance technician can open the door safely. Can I just reset the thermal fuse instead of replacing it? No. Unlike a thermostat, this thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original opening temperature, terminal configuration, and mounting position of the thermal fuse originally installed in your oven, range, or microwave-oven combo. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WB15X27280 Genuine OEM GE Oven Door Handle and End Cap Assembly — Stainless Steel The WB15X27280 is a genuine GE OEM oven door handle and end cap assembly, finished in stainless steel, for GE ranges. This is the bar you grip every time you open or close the oven door, along with the two end caps that anchor it securely to the door frame. It's a simple mechanical part, but it takes a lot of repeated stress and impact over years of daily cooking, which is exactly why it's a common wear item. The handle measures 27.5 inches long. Over time, frequent use, exposure to high oven temperatures, and accidental impact can loosen, crack, or bend the handle or its end caps, making the door harder or less safe to operate. This is sold as a complete assembly — the handle bar and both end caps come together as one part and are not available individually, since the caps are what secure the handle to the door and the two are engineered as a matched set. It directly replaces AP6030812, WB15T10222, 4456008, and PS11762365. Quick Answer The WB15X27280 Genuine OEM GE Oven Door Handle and End Cap Assembly fixes GE, Hotpoint, RCA, and select Kenmore ranges with an oven door handle that's loose, cracked, wobbly, or has a broken or missing end cap. Stainless steel finish, 27.5" long. Replaces AP6030812, WB15T10222, 4456008, PS11762365. Sold only as a complete assembly — the handle and end caps are not available separately, even if only one end cap has failed. Common Problems This Part Fixes Oven door handle feels loose or wobbly when gripped Handle has cracked, bent, or broken End cap is cracked, broken, or missing entirely Handle has separated or come loose from the door frame Difficulty safely opening or closing the oven door Visible discoloration or heat damage on the handle or end caps Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This oven door handle and end cap assembly directly replaces the following OEM and cross-reference part numbers: WB15X27280, WB15T10222, AP6030812, AGE21582, 4456008, EAP11762365, PD00032591, PS11762365 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This handle and end cap assembly is compatible with select GE ranges, and also fits select Hotpoint, RCA, and Kenmore ranges built on the GE platform. Note — sold as a complete assembly only: The handle bar and end caps for this part are not sold separately, even if only one end cap or only one side has failed — you'll need to replace the complete WB15X27280 assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified fit, finish, and mounting Complete assembly — handle bar and both end caps included as a matched set Resolves "loose or wobbly handle," "cracked or broken handle," and "missing or broken end cap" symptoms Stainless steel finish for durability and a clean, matching appearance 27.5" handle length Direct drop-in replacement for the original door-mounted handle Replaces WB15T10222, AP6030812, 4456008, and PS11762365 Compatible with GE, Hotpoint, RCA, and select Kenmore ranges Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number WB15X27280 Part Type Oven Door Handle and End Cap Assembly Condition Genuine OEM Brand GE Finish Stainless steel Handle Length 27.5 in. Kit Contents Handle bar + 2 end caps (sold as one assembly) Repair Difficulty Moderate — inner door panel removal required Quantity 1 handle and end cap assembly Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Unplug Range Or Shut Off Breaker Before Starting — Support The Door While Working Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Open the oven door and locate the screws along the bottom edge of the door — typically four screws securing the inner door panel. Remove these screws, then carefully remove the inner door panel to expose the screws that hold the handle assembly in place from behind. Photograph the mounting hardware and orientation before removing the old handle. Remove the screws securing the old handle and end caps, and lift the assembly free. Position the new WB15X27280 assembly in the same orientation, secure it with the mounting screws, and reinstall the inner door panel with its bottom screws. Close and open the door a few times to confirm the handle feels solid with no wobble before returning the oven to normal use. Tools needed: Phillips or nut driver screwdriver, work gloves. Frequently Asked Questions Can I just replace one end cap instead of the whole handle? No. GE does not sell the end caps or the handle bar separately for this part — WB15X27280 is sold only as the complete assembly. Even if just one end cap has cracked or broken while the handle bar itself is fine, you'll need to order the full assembly to make the repair. How do I access the handle to replace it? Start at the bottom edge of the oven door, where you'll find screws (typically four) securing the inner door panel. Remove those screws and take off the inner panel, which exposes the screws holding the handle assembly in place from behind. From there, removing the old handle and installing the new one is straightforward. My handle is curved — can I get a flat one instead? This assembly is designed to match your oven's original handle shape and mounting points, so it replicates the curved profile if that's what your model originally came with. A differently shaped handle isn't offered as a substitute for this part number, since the end caps and mounting points are engineered specifically for the original handle's geometry. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original stainless steel finish, length, and mounting configuration of the handle and end cap assembly originally installed on your range. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XP382 Dryer Gas Valve Solenoid for DC62-00201A The XP382 is an aftermarket replacement gas valve solenoid coil kit for Samsung gas dryers, and also fits select Whirlpool, Sears, and Kenmore models using a compatible two-coil gas valve. This is a newer-style coil kit that fits most dryers using a two-coil gas valve design, and it works alongside the gas valve assembly (DC62-00201A) to regulate the precise amount of gas needed to properly combust and generate heat for drying clothes. Over time, these solenoid coils can weaken or fail electrically, preventing the gas valve from opening correctly even when the igniter is functioning normally. Symptoms of a failing gas valve solenoid include the burner not igniting even though the igniter glows, weak or inconsistent heat, or the dryer running a full cycle with little to no heat. Quick Answer The XP382 Dryer Gas Valve Solenoid fixes Samsung, Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil gas valve, where the burner isn't igniting despite the igniter glowing, heat is weak or inconsistent, or the dryer runs without heating. Fits Samsung DC62-00201A gas valve assembly. This is a gas ignition component — always shut off the gas supply and let the dryer cool before working on it, and if you smell gas at any point, stop and call a professional. Common Problems This Part Fixes Burner not igniting even though the igniter glows normally Weak or inconsistent heat Dryer running a full cycle with little to no heat Gas valve failing to open when the igniter calls for gas Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer gas valve solenoid directly replaces the following OEM and cross-reference part numbers: Fits Samsung Dryer Gas Valve Coils Kit for DC62-00201A If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This gas valve solenoid is compatible with select Samsung gas dryers using the DC62-00201A gas valve assembly, and also fits select Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil gas valve design. Note: This is a coil kit that works with the gas valve assembly, not a replacement for the full valve body itself. If your gas valve assembly needs full replacement rather than just the coils, you'll need the complete DC62-00201A assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which part your dryer needs. Key Features Aftermarket replacement gas valve solenoid coil kit Resolves "burner won't ignite," "weak heat," and "no heat" symptoms tied to gas valve solenoid failure Newer-style coil kit fitting most two-coil gas valve designs Direct drop-in replacement matching the original mounting and connection Fits Samsung Dryer Gas Valve Coils Kit for DC62-00201A Compatible with Samsung, Whirlpool, Sears, and Kenmore gas dryers using a compatible two-coil valve Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XP382 OEM Part Number DC62-00201A (compatible coil kit) Part Type Dryer Gas Valve Solenoid Coil Kit Condition Aftermarket Replacement Coil Configuration Two-coil Application Gas Dryers Repair Difficulty Moderate — gas appliance component Quantity 1 solenoid coil kit Compatible Brands Samsung, Whirlpool, Sears, Kenmore Installation Notes ⚠️ Shut Off Gas Supply And Unplug Dryer Before Starting This is a gas ignition component. Turn off the gas supply to the dryer at the shutoff valve and disconnect power at the outlet before beginning. Allow the dryer to cool fully if it has recently been in use. Wear work gloves. If you smell gas at any point during this repair, stop immediately, do not operate any switches, leave the area, and contact your gas utility or a qualified technician from a safe location. Access the gas valve assembly, typically located near the burner housing — consult your dryer's service documentation for the exact access point on your model. Locate the old solenoid coils and disconnect their wiring. Remove the mounting screws or clips securing the old coils to the valve body and pull them free. Install the new XP382 coils in the same position, reconnect the wiring fully, and secure the mounting hardware. Restore the gas supply and power, then test the burner to confirm it ignites reliably with consistent heat. If you are not fully comfortable working with gas line connections, have a qualified technician perform this repair instead. Frequently Asked Questions My igniter glows but the burner doesn't light. Is this the part I need? Yes, this is a classic sign of a failed gas valve solenoid. The igniter can glow and reach ignition temperature normally, but if the solenoid coils that open the gas valve have failed electrically, no gas reaches the burner to actually ignite, leaving the dryer to run without heat. Do I need the whole gas valve assembly, or just this coil kit? If the valve body itself is intact and only the solenoid coils have failed, this coil kit is the more targeted and typically less expensive repair. If the valve body is cracked, stuck, or otherwise physically damaged, you'll need the complete DC62-00201A gas valve assembly instead. Is it safe to replace this myself? This repair involves working around your dryer's gas supply line, so take care to fully shut off the gas and let the appliance cool before starting. If you're not comfortable working around gas appliances, or if you smell gas at any point, stop and contact a qualified technician or your gas utility rather than continuing the repair yourself. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the coil configuration and connection type needed to work with the DC62-00201A gas valve assembly used in compatible Samsung, Whirlpool, Sears, and Kenmore gas dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

306508CM Dryer Front Glide Kit Includes rivets and cushion. Fits specific Maytag dryer models. Replaces Part Numbers: 306508, 1309, 3-12941, 3-6508, 306508VP, 312941, AH1804752, DE747, EA1804752, K35-603, AP4037304, PS1804752. Description: This Tumbler Bearing Kit is a replacement part for specific Maytag, Amana, Whirlpool dryer models. It includes multiple replacement glides that support the movement of the tub. As it rotates during the cycle, the tub experiences friction that the bearings help manage.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309 The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run. Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800. Quick Answer The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation. Common Problems This Part Fixes Dishwasher won't start because the door won't latch or the door switch never registers as closed Door feels loose, doesn't seal tightly, or doesn't hold shut properly Water leaking out around the door during a wash cycle Door latch failing to catch even though the door appears closed Visible wear, bending, or damage on the strike itself Increased door-closing noise since the strike no longer cushions the latch properly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers: 8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including: Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1 KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1 Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200 Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models) Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher. Key Features Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed Works as a mechanical actuator for the door switch, confirming to the control that the door is closed Provides the door tension needed for a proper watertight seal Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage Durable metal construction, approximately 2" in length Direct drop-in replacement — mounts to the original tub location Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800 Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 8580309 OEM Part Number WP8580309 Part Type Dishwasher Door Latch Strike Condition Aftermarket Replacement Material Metal Length Approx. 2 in. Weight Approx. 0.03 lbs. Location Top of the dishwasher tub Function Locks the door latch and actuates the door switch Repair Difficulty Easy — basic hand tools, minor disassembly Quantity 1 door latch strike Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley Installation Notes ⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves. Frequently Asked Questions My dishwasher won't start even though I closed the door. Is this the strike? It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong. Water is leaking around my door during the cycle. Could that be this part? Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash. Is this the same strike used on all Whirlpool dishwashers? No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM WP12028505AP Refrigerator Door Closer Cam The Genuine OEM Whirlpool WP12028505AP is the gray door closer cam for select bottom-mount Whirlpool-built refrigerators, including Maytag, KitchenAid, Kenmore and Amana models. The closer cam installs at the hinge and helps the door close smoothly and seal tightly, keeping cold air in. When it cracks or wears out, the door may not close completely, may not stay closed, or may swing open. This is the original Whirlpool part, not an aftermarket equivalent. Check your model number before ordering, as bottom-mount refrigerators use several different closer and hinge pieces. Quick Answer The Genuine OEM WP12028505AP Door Closer Cam replaces a cracked or worn door closer on a compatible Whirlpool-built bottom-mount refrigerator. Replaces 12028505AP and W10191100. Classic symptoms: the door won't close completely, won't stay closed, or the closer is cracked or worn. Common Problems This Part Fixes Door won't close completely Door won't stay closed, or swings open Cracked or worn door closer Clicking sound at the hinge Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door closer cam replaces or supersedes the following part numbers: WP12028505AP, 12028505AP, 1469168, W10191100, AP6005420, AWP46489, EAP11738468, PD00007976, PS11738468 Whirlpool sells several similar-looking door closers and cams in different colors and for different doors. If your old closer shows a different number, contact our support team and we'll check whether it matches. Compatibility This door closer cam is listed for Whirlpool, Maytag, KitchenAid, Kenmore and Amana bottom-mount refrigerators, including these examples: Whirlpool WRB329RFBM05, WRB329DMBM05, WRB329LFBM05 KitchenAid KRBL109ESS05, KRBR109ESS05; Maytag MBF1958FEZ08, MBF2258FEZ08 Amana ABB1924BRM05; Kenmore 10672003010, 59669332010 Note: The models above are a small sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM Whirlpool part, not an aftermarket equivalent Gray door closer cam that installs at the hinge Helps the door close smoothly and seal tightly Replaces a cracked or worn door closer Product Specifications Part Number WP12028505AP OEM Part Number WP12028505AP Part Type Refrigerator Door Closer Cam Condition Genuine OEM Manufacturer Whirlpool Color Gray Application Select Bottom-Mount Refrigerators Installation Notes ⚠️ Unplug The Refrigerator And Wear Work Gloves Unplug the refrigerator before you begin, and wear work gloves. Access to the hinge may mean raising the leveling legs, removing the base grille, and rolling the unit out from the wall. Removing the door first is often easier. Keep your model's parts diagram handy, note how the old closer and hinge pieces fit together, and replace the closer in the same position. Reinstall the door, check that the refrigerator is level, and test that the door closes and seals. Frequently Asked Questions My refrigerator door won't close completely. Is this the part I need? A cracked or worn door closer is a common cause. If the problem continues after replacing it, check the hinges and door stops, and make sure the refrigerator is level. Is this an OEM or aftermarket part? This is a genuine OEM part from Whirlpool, not an aftermarket equivalent. Do I also need a new hinge or other door pieces? It depends on your model. Closers work together with hinge pieces, and some customers report needing a different or additional piece. Check your parts diagram, or contact our support team and we'll help you confirm what you need. Will this fit my refrigerator? It is listed for select bottom-mount Whirlpool-built refrigerators, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

279769 Dryer Thermostat Kit - Compatible with Whirlpool, Kenmore, Maytag Product Description Keep your dryer running safely with the replacement 279769 Dryer Thermostat Kit. This kit is designed for select Whirlpool, Kenmore, Maytag, Roper, Estate, KitchenAid, and other dryers, featuring a high-limit thermostat (L250-80F) and a thermal cut-off fuse (352F) to prevent overheating. It addresses issues like no heat, not enough heat, overheating, or failure to start, offering a cost-effective alternative to OEM parts. Note: Includes one high-limit thermostat, one thermal cut-off fuse. Disconnect power before installation. Check dryer venting for blockages to prevent repeat failures. Replaces part numbers: 279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, SET184, AH334278, EA334278, EAP334278, PD00002485, AP3094224, PS334278. Compatibility: Compatible with models including but not limited to: Whirlpool: NGD4655EW, WGD4815EW, WGD5000DW, MGDC215EW, MGDX655DW Kenmore: 110.60022010, 110.70102312, 110.78002012 Maytag: MEDC215EW1, MGDX655DW1 Roper: RED4640YQ0 Estate: EED4400WQ0 KitchenAid: YKEHS01PMT0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Roper, Estate, KitchenAid, and other dryers. 🔥 Specifications: High-limit thermostat (L250-80F), thermal cut-off fuse (352F). 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves no heat, not enough heat, overheating, or failure to start. Product Specification Part Number: 279769 Component Type: Dryer thermostat kit Material: Metal and plastic Dimensions: High-limit thermostat: 2" L x 1-1/2" W; Thermal cut-off fuse: 2" L x 1-1/2" W (Based on web:6, web:16) Weight: 2.4 oz (Based on web:1, web:15) Electrical Specs: High-limit thermostat: L250-80F (121°C); Thermal cut-off fuse: 352F (178°C) Mounting: Screw-mounted on heater housing. Operating Conditions: Suitable for high-heat dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running safely today! Add to cart now for a budget-friendly fix!

Read more less

8547168 Dryer Drum Belt - Compatible with Whirlpool, Maytag, Kenmore replaces WP8547168 Product Description Restore your dryer’s performance with the 8547168 replaces WP8547168 Dryer Drum Belt. This replacement dryer drive belt is designed as a replacement for select Whirlpool, Maytag, Kenmore, KitchenAid, and other compatible dryers, offering a cost-effective alternative to the original. It connects the motor to the drum, enabling smooth rotation to tumble clothes during the drying cycle. This part addresses issues like the drum not spinning, unusual noises (e.g., squeaking or thumping), or the dryer stopping mid-cycle, often caused by a worn, stretched, or broken belt. Note: Includes (1) 4-rib dryer drum belt. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: WP8547168, 8547168, 1180091, LB7168, 935H4, WP8547168VP, PD00002997, EAP11746376, AP6013154, PS11746376. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED6200SW0, WED6200SW1, WED6400SB0, WED6400SW0, WED6400SW1, WGD6200SW0, WGD6200SW1, WGD6400SB0, WGD6400SW0, WGD6400SW1, WGD6600VU0, YWED6200SW0, YWED6400SW0 Maytag: MGD6300TQ0, MGD6300TQ1 Kenmore: 110.67032600, 110.67042600, 110.67852600 KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, Magic Chef: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Roper, Estate, Admiral, and Magic Chef dryers. 🔧 Specifications: 4-rib belt, rubber construction, approximately 93.5". 💪 Reliable Performance: Ensures smooth drum rotation for consistent drying. 🛠️ Easy Installation: Requires screwdriver, pliers; typically installed in 20–30 minutes. 🛡️ Effective Fixes: Resolves drum not spinning, squeaking noises, or mid-cycle stopping. Product Specification Part Number: 8547168 Component Type: Dryer drum belt Material: Rubber Dimensions: Approximately 93.5" Compliance: Prop 65 warning for California. Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO DD62-00084A Dishwasher Water Valve – Compatible with Samsung Dishwashers Product Description Restore proper water flow and reliable cleaning performance with the XPARTCO DD62-00084A Dishwasher Water Valve. This Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This replacement part ensures precise water flow control, allowing your dishwasher to operate efficiently and effectively. A faulty water valve can cause no water entering the dishwasher, slow filling, or poor cleaning performance. Replacing it with this dependable XPARTCO valve helps restore consistent water flow and efficient operation. XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and function. Replaces Part Numbers DD62-00084A, 2692215, ASM36078, EAP4222448, PD00002158, 737534554937, OEM15534663, AP5178218, PS4222448 Compatibility This replacement dishwasher water inlet valve fits select Samsung dishwashers. Common compatible models include (but are not limited to): Samsung DW80F600UTS Samsung DW80J3020US Always verify your dishwasher’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM fit and water flow performance 💧 Accurate Water Fill Control – Ensures proper water levels for effective cleaning ⚙️ Fixes Common Issues – Resolves no-fill or slow-fill problems 💪 Durable Solenoid Valve – Designed for reliable long-term use 💰 Cost-Effective Repair – Affordable alternative to OEM valves ⚠️ Symptoms If your dishwasher is experiencing any of the following issues, this part may need replacement: ❌ Dishwasher not filling with water 💧 Slow or weak water flow ⚠️ Poor cleaning performance due to low water level 🔄 Cycle not starting properly 🚫 No water entering during wash cycle Replacing this water valve can restore proper dishwasher operation and cleaning efficiency. 📐 Product Specification Part Number: XPDD62-00084A Component Type: Dishwasher Water Inlet Valve Voltage: 120V AC Application: Dishwasher water supply system Mounting: Screw-mounted with hose connection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, adjustable wrench ⚠️ Safety First: Disconnect power and shut off the water supply before servicing the dishwasher. Basic Steps: Turn off power and water supply. Remove the lower access panel. Disconnect water supply line and electrical connector. Remove mounting screws and remove the old valve. Install the new XPARTCO DD62-00084A valve. Reconnect water line and wiring. Restore power and water, then test for leaks and proper filling. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore reliable dishwasher performance — Add to Cart Now for a dependable repair!

Read more less

XPARTCO W10516085 Dryer lint Screen Replaces Part Numbers: WPW10516085, W10370972, W10516085, AP6022545, PS11755878, W10211906   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less