XPARTCO 62-23543-01 Gas Furnace Flame Sensor – Compatible with Rheem, Ruud, and WeatherKing Furnaces
Product Description
Restore safe and reliable furnace operation with the XPARTCO 62-23543-01 Gas Furnace Flame Sensor. This high-quality aftermarket replacement detects the presence of a burner flame and signals the control board to keep the gas valve open. A dirty or failed flame sensor can cause short cycling, ignition failure, or a furnace that won’t stay lit. Replacing it with this durable XPARTCO sensor ensures proper flame detection and dependable heating performance.
Specification :
The furnace flame sensor is designed to detect the flame.
1/4”male quick connect, Angle - sensor offset: 90 degree.
Replaces Part Numbers
62-23543-01,62-23543-02, 62-23543-03, 62-23543-04
Compatibility
This replacement flame sensor fits select Rheem, Ruud, and WeatherKing gas furnaces.
Example compatible models include (but are not limited to):Rheem RGRJ series, Ruud UGDG series, WeatherKing RGRA series.
Always verify your furnace’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM flame-sensing performance
🔥 Accurate Flame Detection – Ensures gas valve remains open only when flame is present
💰 Cost-Effective Repair – Reliable alternative to expensive OEM sensors
🛠️ Simple Installation – Direct-fit design with single mounting screw
🛡️ Fixes Common Issues – Solves furnace short cycling, ignition failure, or burner shutdown
📐 Product Specification
Part Number: 62-23543-01
Component Type: Gas Furnace Flame Sensor
Material: Stainless steel sensor rod with ceramic insulator
Mounting: Single-screw bracket mount
Electrical Connection: Spade terminal
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, fine abrasive pad (optional for cleaning)
⚠️ Safety First: Turn off power and gas supply to the furnace before servicing.
Steps:
Shut off furnace power and gas supply.
Locate the flame sensor near the burner assembly.
Disconnect the wire and remove the mounting screw.
Install the new XPARTCO 62-23543-01 flame sensor.
Reconnect the wire, restore power and gas, and test furnace operation.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & HVAC Parts Supplier
🔄 30-Day Return Policy
Restore safe furnace ignition and heating — Add to Cart Now for a reliable, budget-friendly replacement!
XPARTCO W10195840 Dishwasher Dishwasher Adjuster Position Clip
Fits Specific Whirlpool, Maytag Dishwasher Models
Replaces Part Numbers: WPW10195840, W10195840, W10418323, 1872228, AP6016800, PS11750093.
Description: This Dishwasher Adjuster Position is a replacement part for specific Maytag, Kenmore, Whirlpool dishwasher models. It plays a vital role in adjusting the height of the upper rack, allowing for flexible loading options and accommodating larger items when necessary.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WE12X10014 Dryer Drum Belt
The XPARTCO WE12X10014 is an aftermarket replacement drum belt for GE electric and gas dryers, and also fits select Hotpoint, RCA, Kenmore, and Whirlpool models. This is the most common belt used across this dryer platform. This flat belt wraps around the drum, motor pulley, and idler/tensioner pulley, transmitting the motor's rotation to spin the drum and keep clothes tumbling evenly throughout the drying cycle.
Measures 87.875" long, 1/4" wide, flat with 4 ridges on one side. Over time, the belt dries out, cracks, or breaks from age and regular use. If the dryer motor is running but the drum won't rotate, the belt has likely broken. Symptoms of a failing or broken belt include the drum not spinning even though the motor runs, unusual noise during operation, or the dryer not tumbling clothes at all. It directly replaces WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
Quick Answer
The XPARTCO WE12X10014 Dryer Drum Belt fixes GE, Hotpoint, RCA, Kenmore, and Whirlpool electric and gas dryers where the motor runs but the drum won't rotate, or where you hear unusual noise or no tumbling at all. 87.875" long, 1/4" wide, flat, 4 ridges. Replaces WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043. Clean any dust off the drum with glass cleaner and a paper towel before installing the new belt — soapy cleaners can cause the belt to slip.
Common Problems This Part Fixes
Motor runs but the drum won't turn
Dryer not tumbling clothes at all
Unusual noise during operation
Squealing on startup, possibly indicating a worn belt or bearing
Drum stopping mid-cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum belt directly replaces the following OEM and cross-reference part numbers:
WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select GE electric and gas dryers, and also fits select Hotpoint, RCA, Kenmore, and Whirlpool dryers built on the same platform, including model numbers such as GTD33EASK0WW, GTD42EASJ2WW, GTD42GASJ2WW, and GTD45EASJ2WS.
Note: Always verify your full model number before ordering, since GE uses several different belt lengths across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement drum belt — the most common belt used on this GE/Hotpoint dryer platform
Flat belt with 4 ridges for secure grip against the drum, motor, and idler pulleys
Resolves "motor runs but drum won't turn," "unusual noise," and "won't tumble" symptoms
87.875" long, 1/4" wide
Direct drop-in replacement matching the original length and profile
Replaces WE12X10014, 103C7487, 1472898, WE12X0042, WE12X0082, WE12X42, WE12X42-, WE12X42P, WE12X42R, WE12X82, WE12X82E, WE12X82P, WE12X82R, 132C7487P004, AH2350043, EA2350043, PD00000990, EAP2350043, AGE25021, AP4379804, PS2350043
Compatible with GE, Hotpoint, RCA, Kenmore, and Whirlpool electric and gas dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWE12X10014
OEM Part Number
WE12X10014
Part Type
Dryer Drum Belt
Condition
Aftermarket Replacement
Length
4 ribs, 87.875
Width
1/4"
Profile
Flat, 4 ridges on one side
Function
Transmits motor rotation to spin the drum
Repair Difficulty
Easy to Moderate
Quantity
1 drum belt
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Whirlpool
Installation Notes
⚠️ Unplug Dryer Before Starting — Clean Drum Dust With Glass Cleaner, Not Soap Disconnect power at the outlet before beginning. Wear work gloves. Remove the screws on the back panel and pull the dryer away from the wall for access, or access from the front panel depending on your model — look down inside the front panel for two bolts holding the front assembly in place, removable with a 5/16" socket, taking care to disconnect the friction-fit door switch sensor wires as you pull the panel away. Locate the drive belt and tension pulley. Release tension on the idler pulley and remove the old belt from the motor pulley and drum. If the belt was broken, take note of its orientation and routing path before removing any remnants, since figuring out how it wraps around the tensioner is the trickiest part of reinstallation. Dust buildup on the drum can cause the new belt to slip — clean the drum thoroughly with glass cleaner and a paper towel before installing the new belt. Do not use a soapy cleaner, since soap residue will cause the belt to slip. Feed the new WE12X10014 belt around the drum, then through the idler pulley and motor pulley, matching the original routing. Pull the belt tight, re-tension the idler pulley, and rotate the drum by hand with the front cover off to confirm smooth movement before reassembling. Reinstall the front or back panel. Don't forget to reconnect the exhaust vent hose before restoring power, or you may blow lint and dust throughout your laundry room on the first run. Restore power and run a test cycle to confirm smooth, quiet tumbling. Tools needed: 5/16" socket, Phillips screwdriver, adjustable wrench, glass cleaner, paper towels, work gloves.
Frequently Asked Questions
The motor is running but the drum won't turn. Is this the belt?
Yes, this is the classic and most reliable sign of a broken drum belt. If you can hear the motor running normally but the drum itself stays still, there's a good chance the belt has snapped and is no longer connecting the motor's rotation to the drum.
Why does the installation guide mention cleaning the drum with glass cleaner specifically?
Dust that accumulates inside the drum over time can cause a new belt to slip against the drum surface, undermining the repair before it even gets a fair test. Glass cleaner and a paper towel remove this dust effectively. Avoid soapy cleaners, since soap residue left behind has the same slipping effect you're trying to prevent.
Any tips for figuring out how the belt routes around the tensioner?
If your old belt broke rather than simply wearing thin, take a photo of any remaining belt pieces and their position before removing them completely, since this shows you the correct routing path. One customer specifically noted that figuring out how the belt goes around the tensioner in the proper orientation was the trickiest part of the whole repair — a reference photo or a quick look at an installation video for your model helps considerably.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the length, width, and rib pattern of the original WE12X10014 drum belt used in compatible GE, Hotpoint, RCA, Kenmore, and Whirlpool electric and gas dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
EXPHV13 Microwave High Voltage Diode (Rectifier)
Replaces Part Numbers: W11256462, W10492278, W10886077, WPW10492276, WPW10575765, AP6784287, PS12584264, WPW10687786, W10687786, 4449228, AP6023790, PS11757136, 5304470521, AP4396425, PS2353199, WB27X10597, AH239740, EA239740, AP3192533, PS239740.
CL04-12A=500mA CL04-12 12kV
Description: This Diode Assembly is a replacement part for specific microwave models. It plays a crucial role in converting alternating current (AC) to direct current (DC), which is essential for the microwave’s high-voltage functions, including powering the magnetron to generate microwave energy. Over time, diodes can fail due to electrical surges, excessive heat, or wear and tear. A faulty diode assembly can lead to inefficient or non-functional microwave operation, impacting its ability to heat food properly.
EXPHV13 Microwave High Voltage Diode – OEM-Quality Replacement
Replace your faulty diode with the EXPHV13, a high-quality, aftermarket microwave high voltage diode rated for 12,000V / 500mA. It restores proper heating function and is compatible with many leading microwave brands.
Key Features:
✅ Rated for 12kV, 500mA
✅ Direct replacement for most standard microwaves
✅ Solves issues like no heat, humming, or tripped breakers
✅ Easy-to-install universal fit for GE, LG, Whirlpool, Panasonic, etc.
⚠️ Always disconnect power before installation. For compatibility questions, contact us—we’re happy to help!
📦 Part Number: EXPHV13💯 30-Day Money Back Guarantee
XPHVP-16 Microwave Convection Oven High Voltage Diode – Replaces TurboChef 100481 – Compatible with Commercial & Residential Microwave Models
Product Description
Restore proper heating performance in your commercial or residential microwave with the XPHVP-16 Microwave Convection Oven High Voltage Diode. This high-quality aftermarket diode replaces TurboChef 100481 and is engineered to handle the elevated heat and voltage levels found in high-speed ovens and convection microwave systems. A failing HV diode can cause the microwave to run without heating, blow fuses, or produce loud humming sounds. Installing this XPHVP-16 diode restores safe high-voltage operation and consistent heating.
Replaces Part Numbers
XPHVP-16, TurboChef 100481, HV07-16, HVP-16, TBC100481, CKTE100481 equivalent high-voltage microwave diodes.
Compatibility
This aftermarket high-voltage diode replaces TurboChef 100481 and fits many commercial and household microwave or convection microwave ovens, including:
Fits specific TurboChef models including Bullet, ECO ST, Encore, Encore 2, G5, I3, NGC, NGC2, NGO, Sota/I1, TORNADO 2, i5.
Typical compatible equipment includes:TurboChef High-Speed Ovens, and other convection microwave systems requiring a 12–16kV diode.
Always verify electrical specifications before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to replace TurboChef 100481 and match OEM electrical performance
🔥 High-Heat & High-Voltage Rated – Built for demanding commercial microwave environments
💰 Cost-Effective Commercial Repair – A reliable alternative to costly OEM replacement parts
🛡️ Solves Common Issues – Fixes no-heat conditions, humming, blown fuses, and weak heating output
📐 Product Specification
Part Number: XPHVP-16
Replaces: TurboChef 100481
Component Type: High Voltage Rectifier Diode
Voltage Rating: 12–16 kV peak
Current Rating: Max. Forward Current 750MA
Polarity: Standard microwave HV polarity (stripe = cathode)
Material: Heat-resistant high-voltage diode with insulated leads
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Screwdriver, insulated gloves, needle-nose pliers
⚠️ Safety First: Microwave and commercial oven repairs involve dangerously high voltage even when unplugged. Only qualified technicians should replace HV components.
Steps (for trained professionals):
Disconnect power and properly discharge the HV capacitor.
Remove the microwave or oven’s service cover.
Locate the HV diode near the capacitor and transformer.
Remove the old diode and install the new XPHVP-16, ensuring correct polarity.
Reassemble unit and test heating performance.
⏱️ Time Required: 20–30 minutes (professional repair recommended)
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & Commercial Equipment Parts Supplier
🔄 30-Day Return Policy
Restore powerful, consistent heating — Add to Cart Now for a reliable and cost-effective replacement!
XPARTCO W11220230 Washer Water Inlet Valve
The XPARTCO W11220230 is an aftermarket replacement washer water inlet valve designed to control the flow of hot and cold water into your washing machine during each cycle. This Water Inlet Valve is a replacement part compatible with specific Maytag, Whirlpool washing machine models. This valve controls water flow into the tub by opening at predetermined points in the cycle. Proper water regulation is necessary for optimum cleaning performance..
Over time, inlet valves can fail due to mineral buildup, electrical issues, or worn internal seals — leading to slow filling, no fill, or continuous water flow. Replacing the valve restores proper water control and helps prevent leaks or cycle errors.
Quick Answer
The XPARTCO W11220230 Washer Water Valve fixes washers that won’t fill, fill too slowly, or won’t stop filling with water. It controls incoming water flow and restores proper wash cycle operation.
Common Problems This Part Fixes
Washer not filling with water
Slow water fill during cycles
Water continuously flowing into washer
Incorrect water temperature
Washer stopping due to fill errors
Leaking or stuck inlet valve
Replaces Part Numbers
This water inlet valve replaces the following part numbers:
W11220230, W10853296, 4591408, W10632527, W10758829, W11096268, AWP43504, EAP12349461, PD00042661, AP6329544, PS12349461
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select washers from the following brands:
Whirlpool washers
Maytag washers
Amana washers
Kenmore / Sears washers (select models)
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Key Features
Three coil hot and cold water valve.
OEM-equivalent fit, performance, and durability
Restores proper water fill levels and cycle operation
Durable construction resists mineral buildup and wear
Prevents leaks and overfilling issues
Direct replacement for W11220230 valve assembly
Product Specifications
Part Number
W11220230
Part Type
three coil hot and cold water inlet valve.
Application
Top Load / Front Load Washers
Condition
Aftermarket Replacement
Function
Controls Water Flow
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore
Installation Notes
⚠️ Safety First — Disconnect Power & Water Supply Unplug the washer and turn off the water supply before servicing. Remove the rear or top panel to access the inlet valve. Disconnect water hoses and electrical connectors, then remove the mounting screws to replace the valve. Reconnect hoses securely to avoid leaks and test for proper operation after installation.
Frequently Asked Questions
What does a washer water inlet valve do?
It controls the flow of hot and cold water into the washer. When the valve fails, the washer may not fill properly or may overfill.
Will this fix a washer that won’t fill?
Yes, a faulty inlet valve is one of the most common causes of no-fill or slow-fill issues.
Is this an OEM part?
This is a high-quality aftermarket replacement built to OEM-equivalent standards for performance and durability.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in high-quality replacement parts. Fast shipping from our U.S. warehouse and expert support available to help verify compatibility.
✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout
ERP 4560EL3001A Dryer Idler Pulley
Replaces Part Numbers: 4560EL3001A, PS3523032, AP4438625
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from extreme overheating with the XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F), Normally Closed. This high-temperature safety device is designed to remain closed (conductive) during normal operation and open permanently when internal temperatures exceed 180℃, immediately cutting power to prevent serious damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe and reliable operation.
Replaces Part Numbers
XPMTC-180, MTC-180, Microwave Thermal Fuse 180C NC, 356F Normally Closed Thermal Cutoff, WB24X29270, 4586233, PD00045446, EAP12170419, KSD1 BR1 180, AP6262395, PS12170419, 6930W1A003X, 1365203, AH3530468, EA3530468, PD00001857, AP4443816, PS3530468.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 180℃ (356°F) NC thermal cutoff.
Commonly used near the magnetron, high-heat zones, or cavity protection points.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 180℃ (356°F) Rating – Designed for high-temperature protection zones
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Prevents overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-180
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 180℃ (356°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or high-heat cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or high-heat area.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-180 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety under extreme heat conditions — Add to Cart Now for a dependable, budget-friendly repair!
ERP WD12X10231 Dishwasher Lower Rack Roller
Replaces Part Numbers: WD12X10231, 1263942, AH1481883, EA1481883, AP3994981, PS1481883.
Description: This Lower Dishrack Stud and Roller Assembly is a replacement part for select GE dishwasher models. It is essential for the smooth operation of the dishwasher's lower dishrack, allowing it to slide in and out. This assembly includes the roller that attaches to the dishrack and the studs that secure these rollers in place.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO DD61-00222A Dishwasher Middle Dish Rack Roller - Compatible with select Samsung models
Product Description
Restore smooth operation to your dishwasher with the XPARTCO DD66-00022A Dishwasher Lower Dish Rack Roller. This replacement roller is designed as a replacement for select Samsung dishwashers, offering a cost-effective alternative to the original. It supports the lower dish rack, ensuring it glides smoothly in and out for easy loading and unloading. This part addresses issues like the rack sticking, wobbling, or falling off the rails, often caused by worn or broken rollers.
Note: Includes (1) lower dish rack roller. Disconnect power before installation. Verify compatibility with your dishwasher model.
Replaces part numbers: DD66-00023A, PD00002184, EAP4222532, DW0023A, AP4342187, 2002711, PS4222532.
Compatibility:
Compatible with select Samsung dishwasher models, including but not limited to:
Samsung: DW80J3020US/AA-0000, DW80J3020US/AA-0001, DW80J3020US/AA-0002, DW80J3020US/AA-0003, DW80J3020US/AA-0004, DW80J3020US/AA-0005, DW80J3020US/AA-0006, DW80J3020US/AA-0007, DW80J3020US/AA-0008, DW80J3020US/AA-0009, DW80J3020US/AA-0010, DW80J3020US/AA-0011, DW80J3020US/AA-0012, DW80J3020US/AA-0013, DW80J3020US/AA-0014
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dishwashers.
🔧 Specifications: High-quality plastic roller with metal axle.
💪 Reliable Performance: Ensures smooth gliding of the lower dish rack.
🛠️ Easy Installation: Tool-free; typically installed in 5–10 minutes.
🛡️ Effective Fixes: Resolves sticking, wobbling, or falling rack issues.
Product Specification
Part Number: XPARTCO DD66-00023A
Component Type: Dishwasher lower dish rack roller
Material: Plastic
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today!
Add to cart now for a reliable fix!
