(8 Pack) 3977394 Dryer Thermal Cut-Off Kit – Replaces 3977394 – Compatible with Whirlpool, Kenmore, Maytag, and KitchenAid Dryers
Product Description
Protect your dryer from overheating with the 3977394 Dryer Thermal Cut-Off Kit. This high-quality aftermarket replacement shuts off the heating element if the dryer temperature rises above safe operating limits. A failed cut-off can cause no-heat issues or overheating during drying cycles. Installing this reliable 3977394 kit restores safe temperature control and helps prevent damage to internal components.
Replaces Part Numbers
XPTC352, 3977394, 352F
Compatibility
This replacement thermal cut-off kit fits select Whirlpool, Kenmore, Maytag, Roper, Estate, Crosley, and KitchenAid dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.86573110, and Maytag MEDC215EW1.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM safety and temperature performance
🔥 Overheat Protection – Automatically shuts off power to the heating element if the dryer overheats
💰 Cost-Effective Fix – Affordable alternative to OEM thermal cut-off kits
🛠️ Easy Installation – Direct-fit design with included thermostats and connectors
🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or shutting off prematurely
📐 Product Specification
Part Number: 3977394
Component Type: Dryer Thermal Cut-Off Kit
Includes: Thermal cut-off, high-limit thermostat, mounting hardware, and wire connectors
Temperature Rating: Cut-off opens at ~352°F.
Material: Metal thermostat housing and heat-resistant components
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Nut driver, Phillips screwdriver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove the rear dryer panel.
Locate the heating element housing and identify the cut-off and thermostat.
Disconnect wires and remove the old components.
Install the new 3977394 cut-off and thermostat in the same locations.
Reconnect wires, reassemble the back panel, and restore power.
Run a short test cycle to verify proper heating.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your dryer safe and efficient — Add to Cart Now for a reliable, budget-friendly repair!
W11126005CM Dishwasher Wash Vane Sensor
Description: This Sensor is a replacement component specifically designed for certain Whirlpool dishwasher models. It plays a crucial role in monitoring cycle conditions like temperature and soil levels to automatically customize wash sequences. Causes of a bad sensor can include leaking or faulty wiring disrupting signals over time, mineral buildup gumming internal mechanisms, or damage from impact.
Replaces Part Numbers: W11126005, W11503875, W10380177, W10380483, W10647239, AP6261394, PS12114437.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
WE04X29793 Dryer Genuine OEM High Limit Thermostat
Fits Specific GE Dryer Models.
Replaces Part Numbers: WE04X29793, OEM20955920, AP6985305, PS12749247.
Description: This High Limit Thermostat is a Genuine OEM replacement part for specific GE electric dryer models. Located internally near heating components .
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10165425 Refrigerator Genuine Defrost Thermostat
Replaces Part Numbers: WPW10165425, W10165425, 126393249SP, 12639324SP, 1455131, OEM24064262, AP6016065, PS11749348.
Description: This Bimetal Defrost Thermostat is a Genuine OEM part for select Whirlpool refrigerator models. It plays a vital role in the defrost system, regulating the freezer temperature to prevent excessive frost buildup. The thermostat serves as a safety device by shutting off power to the defrost heater if the temperature gets too high, thereby protecting the appliance from overheating and potential damage.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WD26X25103 Genuine OEM GE Dishwasher Variable Wash Pump Kit
The WD26X25103 is a genuine GE OEM variable wash pump kit for premium GE, Café, GE Profile, Monogram, Hotpoint, and Haier dishwashers. The wash pump is the heart of the cleaning system — it draws filtered water from the sump and drives it under pressure through the lower spray arm, the middle spray arm, and the upper wash manifold. What makes this a variable pump is its variable-speed motor: instead of running at one fixed speed, the control board modulates pump speed throughout the cycle, ramping pressure up for heavy soil and down for delicate loads, and shifting flow between spray zones. That is why a failing variable pump often produces uneven results — the bottom rack comes out clean while the top rack is barely wet.
This is a complete kit, supplied with the circulation pump assembly and its integrated wiring harness, so you are not transferring connectors from the old unit. Typical failure modes include worn motor bearings that produce a loud humming or grinding during the wash portion of the cycle, a seized or debris-jammed impeller, a shaft seal that begins weeping water into the base pan and trips the flood switch, and electrical failure of the variable-speed motor windings. It directly replaces WD26X22789, AP6973120, PS12730515, and EAP12730515. This is a moderate DIY repair — most people budget 1–2 hours.
Quick Answer
The WD26X25103 Genuine OEM GE Variable Wash Pump Kit fixes GE, Café, GE Profile, Monogram, Hotpoint, and Haier dishwashers with dishes that come out dirty or gritty, a top rack that isn't getting wet, weak or no spray arm rotation, loud humming or grinding during the wash cycle, or water pooling in the base pan from a leaking pump seal. Variable-speed motor; kit includes pump assembly plus integrated wiring harness. Replaces WD26X22789, AP6973120, PS12730515, EAP12730515. Fits premium CDT865/CDT866, PDT845/PDT846/PDT855, and ZDT915/ZDT975 platforms — not the same pump as WD26X23258.
Common Problems This Part Fixes
Dishes not getting clean — food soil, grit, or film left behind after a full cycle
Top rack not getting wet or not getting cleaned while the bottom rack washes normally
Spray arms turning slowly or not turning at all — insufficient water pressure
Loud humming, whining, or grinding noise during the wash portion of the cycle
Dishwasher runs a full cycle quietly with no audible water circulation
Water pooling in the base pan under the dishwasher from a leaking pump shaft seal
Flood switch or leak sensor tripping and shutting the dishwasher down mid-cycle
Cleaning performance that has gradually declined over months as bearings wear
Pump motor humming but the impeller not turning — seized shaft or jammed impeller
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher variable wash pump kit directly replaces the following OEM and cross-reference part numbers:
WD26X25103, WD26X22789, AGE25305, AP6973120, PD00054224, PS12730515, EAP12730515.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This variable wash pump kit is compatible with select premium built-in dishwashers from the following brands:
GE and GE Profile dishwashers (PDT845, PDT846, and PDT855 series)
Café dishwashers (CDT865 and CDT866 series)
Monogram dishwashers (ZDT915 and ZDT975 series)
Hotpoint dishwashers (select GE-built models)
Haier dishwashers (select GE-platform models)
Verified model numbers include: CDT865SSJ0SS, CDT865SSJ2SS, CDT865SMJ0DS, CDT865SMJ2DS, CDT866P2M4S1, CDT866P3M4D1, CDT866P4M4W2, PDT845SSJ0SS, PDT845SSJ2SS, PDT845SMJ0ES, PDT845SMJ2ES, PDT845SBL2TS, PDT845SBL3TS, PDT845SFL3DS, PDT846SSJ0SS, PDT846SSJ2SS, PDT846SMJ0ES, PDT846SMJ2ES, PDT855SSJ0SS, PDT855SSJ2SS, PDT855SMJ0ES, PDT855SMJ2ES, PDT855SIJ0II, PDT855SIJ2II, PDT855SBL2TS, PDT855SBL3TS, PDT855SFL3DS, ZDT915SSJ0SS, ZDT915SSJ2SS, ZDT915SIJ0II, ZDT915SIJ2II, ZDT915SPJ0SS, ZDT915SPJ2SS, ZDT975SSJ0SS, ZDT975SSJ2SS, ZDT975SIJ0II, ZDT975SIJ2II, ZDT975SPJ0SS, and ZDT975SPJ2SS.
Note: GE uses several different circulation pumps across its dishwasher lineup, and they are NOT interchangeable. The WD26X25103 is the variable-speed pump used on premium CDT/PDT/ZDT platforms. It is not the same part as the WD26X23258 circulation pump (GDT695/PDT825 platforms) or the WD26X22518 pump (PDF820/GDT535/ADT521 platforms). Fitting the wrong pump can result in a physical mismatch at the sump or a harness that will not mate with your control board. Always verify your full model number — including the suffix — before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified flow rate, impeller geometry, and motor control profile
Variable-speed motor allows the control board to modulate wash pressure by cycle and soil level rather than running at one fixed speed
Complete kit — includes the circulation pump assembly and integrated wiring harness, so no connectors need to be transferred from the old pump
Drives water through the lower spray arm, middle spray arm, and upper wash manifold
Resolves "dishes not clean," "top rack not getting wet," "spray arms not turning," "loud humming or grinding," and "water in the base pan" symptoms caused by pump failure
Sealed shaft design protects the motor from sump water intrusion
Direct drop-in replacement for the superseded WD26X22789 — no modifications required
Serves GE Profile, Café, Monogram, Hotpoint, and Haier premium dishwasher platforms
Replaces WD26X22789, AP6973120, PS12730515, and EAP12730515
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WD26X25103
Part Type
Dishwasher Variable Wash Pump Kit (Circulation Pump)
Condition
Genuine OEM
Brand
GE Appliances
Motor Type
Variable speed
Voltage
120V / 60 Hz
Function
Circulates water under pressure to the spray arms and upper wash manifold
Kit Contents
Wash pump assembly + integrated wiring harness
Location
Underneath the tub, mounted to the sump housing
Connections
2 hose clamps + 2 electrical connections
Supersedes
WD26X22789
Repair Difficulty
Moderate — 1 to 2 hours
Quantity
1 pump kit
Compatible Brands
GE, GE Profile, Café, Monogram, Hotpoint, Haier
Installation Notes
⚠️ Disconnect Power And Shut Off Water Before Starting Turn off the dishwasher's circuit breaker and close the hot water supply valve under the sink before beginning. Wear work gloves — the tub edges and undercarriage brackets are sharp. Before condemning the pump, run a quick check: remove the lower spray arm and filter assembly, clear any glass chips, seeds, or labels from the sump, and confirm the spray arm ports are not blocked. A clogged filter screen produces the same "dishes not clean" complaint as a failing pump and costs nothing to rule out. To replace the pump, first remove the two screws securing the dishwasher to the underside of the countertop (or to the adjacent cabinets), disconnect the water line and drain hose, and slide the unit out. Most technicians then lay the dishwasher on its front or on its back to reach the pump — put a towel down to protect the door and finish. Photograph the hose routing and wiring before disconnecting anything. Release the two hose clamps and separate the two electrical connections, then unlock the pump from the sump housing — it typically twists to release from a bayonet-style mount — and lift it out. Inspect the sump gasket and seat while the pump is off; replace the gasket if it is hardened, flattened, or nicked. Install the new WD26X25103 in the same orientation, twist to lock, reattach both hoses with their clamps, and reconnect the harness. Reinstall the dishwasher, restore water and power, then run a full cycle and check underneath for leaks before pushing the unit all the way back and reattaching the mounting screws. Tools needed: Phillips screwdriver, nut driver, pliers or hose clamp pliers, towel, work gloves.
Frequently Asked Questions
My top rack isn't getting clean but the bottom rack is fine. Is that the wash pump?
It's the signature symptom of a weakening wash pump, yes — but check two cheaper things first. The upper wash manifold and the middle spray arm are fed last and at the lowest pressure, so they are the first zones to suffer when pump output drops. However, a clogged filter screen or a spray arm with blocked ports will starve the upper rack the same way. Pull the lower spray arm and filter, rinse them under hot water, poke a toothpick through any blocked spray ports, and run a cycle. If the top rack is still dry or dirty after that, the variable pump is losing pressure and should be replaced.
What does "variable" mean on this pump, and does it matter?
It matters a great deal. A variable-speed pump lets the control board change pump speed during the cycle — higher pressure for heavy soil, lower for delicate loads, and different speeds when directing flow to different spray zones. A fixed-speed pump cannot do that. This is why you cannot substitute a standard circulation pump from another GE platform even if it physically resembles this one: the control board expects a variable-speed motor and will not drive a fixed-speed unit correctly.
The dishwasher is making a loud grinding noise. Do I need the whole pump?
Not always — check for foreign objects first. Glass chips, fruit pits, bones, and hard plastic bits routinely get past the filter and rattle inside the pump housing or wedge against the impeller. Remove the filter assembly and inspect the sump thoroughly with a flashlight. If the sump is clean and the noise is a steady hum or grind that rises with the wash cycle, the pump's motor bearings are worn and the complete kit is the correct repair. Bearing noise does not improve on its own and usually precedes a shaft seal leak.
I found water in the pan underneath the dishwasher. Could the pump cause that?
Yes. When the pump's shaft seal wears out, it weeps water down onto the base pan during every wash cycle. GE dishwashers have a flood switch in that pan, so the machine will eventually detect the water and shut itself down mid-cycle or refuse to start. Before ordering, confirm the water is coming from the pump and not from a loose hose clamp, a cracked sump, or the door gasket — dry the pan completely, run a short cycle, and watch where the first drops appear.
Does this kit include everything, or do I need to reuse parts from the old pump?
The kit ships with the wash pump assembly and its integrated wiring harness, so you will not need to cut, splice, or transfer the electrical connector from your old pump. You will reuse your existing hoses and clamps. Inspect the sump gasket while the pump is out and replace it if it looks hardened, flattened, or nicked — a tired gasket is a common cause of a "new pump that still leaks."
What's the difference between WD26X25103 and WD26X22789?
They are the same pump across production revisions. WD26X22789 was the earlier number and WD26X25103 is the current GE part number that supersedes it. If your dishwasher's parts diagram shows WD26X22789, this listing is the correct replacement — order it with confidence. The additional cross-references (AP6973120, PS12730515, EAP12730515) are catalog identifiers used by various parts distributors for the same kit.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original variable-speed motor profile, impeller geometry, flow rate, sump mounting interface, and harness connector of the pump originally installed in your dishwasher, which is important on this platform because the control board is calibrated to drive a variable-speed pump.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
8558953 Dishwasher Touchpad and Control Panel
Genuine OEM
Fits Specific Kenmore Dishwasher Models
Replaces Part Numbers: WP8558953, 8558953, 1066185, 8558928, 8563373, AP6013229, PS11746451.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WE4X800 Dryer Genuine OEM Thermostat
Replaces Part Numbers: WE4X800, 2285, AH268245, EA268245, ET800, WE04X0730, WE04X0800, WE4X730, OEM10477750, AP2619437, PS268245.
Description: This Thermal Cut-Off Kit is a Genuine OEM part for specific GE dryer models. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO W10316760 Refrigerator Thermistor Sensor
The XPARTCO W10316760 is an aftermarket replacement temperature thermistor compatible with a wide range of Whirlpool-built refrigerators sold under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef brands. The thermistor sits inside the fresh food or freezer compartment and continuously reports internal temperature back to the electronic control board, which uses that reading to cycle the compressor, evaporator fan, and damper to keep the compartment in range. When the thermistor drifts out of calibration or fails outright, the control board loses an accurate temperature signal and the refrigerator commonly responds with erratic cooling, a warmer-than-normal compartment, food freezing when it shouldn't, or a flashing/blank temperature display.
This XPARTCO version is built with a quick-connect mounting clip, so it plugs in without cutting or splicing wires — unlike the genuine Whirlpool OEM part, which ships as a splice-in kit requiring you to cut the old thermistor's leads and join the new ones with included wire connectors. It directly replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers listed below. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO W10316760 Refrigerator Thermistor Sensor fixes Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators that are running warm, running constantly, freezing food unexpectedly, or showing a flashing/blank temperature display. This version uses a quick-connect clip — no wire cutting or splicing like the genuine Whirlpool splice-kit version requires. Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944. Classic symptom: fridge or freezer running warmer than the setting, or running nonstop.
Common Problems This Part Fixes
Refrigerator or freezer running noticeably warmer than the temperature setting
Fridge running constantly and never cycling off
Temperature display flashing, showing dashes, or displaying an error code
Food freezing in the fresh food compartment when it shouldn't be
Compressor and fans not cycling normally, or running nonstop
Inconsistent or swinging temperature readings on the display
One compartment (fridge or freezer) running warm while the other stays normal
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is used across a wide range of Whirlpool-built refrigerators from the following brands:
Whirlpool refrigerators (including WRF535SMBM00, WRX735SDBM00, and related French door / side-by-side models)
KitchenAid refrigerators (including KBFS22EWBL1, KBFS22EWMS1, KBFS22EWMS3, KBFS22EWMS5, KBFS22EWMS7, KBFS22EWWH1)
Maytag refrigerators (select Whirlpool-built models, including KRFF302ESS)
Jenn-Air refrigerators (select Whirlpool-built models, including MFI2269VEM)
Amana refrigerators (select models)
Inglis refrigerators (select models)
Magic Chef refrigerators (select models)
Note: Many of these refrigerators use separate thermistors for the fresh food and freezer compartments, so confirm which sensor location your model uses before ordering — appearance can be similar across positions. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement refrigerator temperature thermistor — reports compartment temperature to the electronic control board
Resolves "running warm," "running constantly," "freezing food," and "flashing display" symptoms caused by thermistor failure
Quick-connect mounting clip — no wire cutting or splicing required
Matches OEM electrical resistance curve for accurate temperature sensing
Approximate lead length ~5 inches
Replaces W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402, AH2580944, AP4538142, AWP40532, EA2580944, EAP2580944, PD00006590, PS2580944, and additional cross-reference numbers
Compatible with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
XPW10316760
OEM Part Number
W10316760
Part Type
Refrigerator Temperature Thermistor / Sensor
Condition
Aftermarket Replacement
Application
Whirlpool-Built Refrigerators (Fresh Food / Freezer Compartment)
Mounting
Quick-connect clip (no splicing)
Approx. Lead Length
~5 inches (may vary by model)
Compatible Brands
Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, Magic Chef
Installation Notes
⚠️ Disconnect Power Before Starting Unplug the refrigerator or shut off power at the breaker before accessing internal panels. Locate the thermistor at its mounting position inside the fresh food or freezer compartment (location varies by model — consult your model's parts diagram if unsure). Photograph the wire routing before disconnecting. On this XPARTCO version, simply unplug the old thermistor's connector from the wiring harness — no cutting or splicing needed. Release the old thermistor from its mounting clip or bracket and remove it. Install the new thermistor in the same position, securing it in its mounting clip. Plug the new thermistor's connector into the wiring harness, matching your photos. Reassemble any panels removed for access. Restore power and allow the refrigerator several hours to stabilize before checking temperatures. Tools needed: nut driver or screwdriver (for panel access), needle-nose pliers (for mounting clip).
Frequently Asked Questions
Is this the same as the genuine Whirlpool W10316760 thermistor?
It's a direct-fit aftermarket equivalent, not the genuine Whirlpool part. The key functional difference is installation: the genuine OEM version ships as a splice-in kit requiring you to cut the old wires and use included splice connectors, while this XPARTCO version has a quick-connect clip that simply plugs in — no splicing tools needed.
Will this fit my refrigerator?
W10316760 and its cross-reference numbers span a wide range of Whirlpool-built models across several brands. Confirm fit using your refrigerator's exact model number before ordering, since visually similar thermistors are used across different platforms and compartment locations. Contact our support team with your model number if you're unsure.
My fridge is warm but the freezer is fine (or vice versa) — could this part be the cause?
Yes. Most of these refrigerators use separate thermistors for the fresh food and freezer compartments, so a single failed sensor can cause one section to run warm while the other stays normal. Confirm which sensor location your model uses before ordering.
Do I need any tools to install this?
Basic hand tools to access the interior panel (typically a nut driver or screwdriver) plus needle-nose pliers to release the old mounting clip. Because this version uses a plug-style connector, no wire strippers, cutters, or splice connectors are needed — unlike the genuine OEM splice-kit version.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical resistance curve, mounting position, and temperature-sensing function of the original W10316760 thermistor used in compatible Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 8577274 Dryer Thermistor - Compatible with Whirlpool, Kenmore, Maytag
Product Description
Ensure optimal drying performance with the XPARTCO 8577274 Dryer Thermistor. This replacement temperature-sensing resistor is designed as a replacement for select Whirlpool, Kenmore, Maytag, and other compatible dryers, offering a cost-effective alternative to the original. It monitors air temperature changes during the drying cycle, providing feedback to the control board to regulate heat levels, preventing overheating and ensuring efficient drying. This part addresses issues like prolonged or shortened drying times, inaccurate temperature readings, or error codes, often caused by a faulty thermistor.
Note: Includes (1) thermistor (mounting hardware not included). Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: WP8577274, 8577274, 1181075, 3390292, 3406294, 3976615, 772546, ER8577274, WP8577274VP, PD00002401, EAP11746740, AP6013514, PS11746740.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: 3LCED9100WQ0, 7MGGW9200MW3, 7MWGD8300SW1, 7MWGD8500SR1, WED6200SW1, WED8000DW3, WED8300SW0, MEDB880BW0
Kenmore: 110.60884990, 110.6007299, 110.6093699, 110.7095299
Maytag: 7MMGDB850WL0, MVWC565FW0
KitchenAid, Amana, Inglis, Crosley: Various models (verify with model number)
Verify your model number or contact our support team for assistance.
Key Features:
Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, and Crosley dryers.
Specifications: High-quality thermistor, approximately 11K Ohms at 70°F (21°C), located on blower housing.
Reliable Performance: Monitors drum air temperature to prevent overheating and ensure efficient drying.
Easy Installation: Requires 1/4-inch nut driver, small flathead screwdriver, and pliers; typically installed in 15–30 minutes.
Effective Fixes: Resolves prolonged or shortened drying times, inaccurate temperature readings, or error codes.
Product Specification
Part Number: XPARTCO 8577274
Component Type: Dryer thermistor
Material: Plastic and metal
Electrical Specs: Approximately 11K Ohms at 70°F (21°C), varies with temperature
Compliance: Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running efficiently today!
Add to cart now for a reliable fix!
XPARTCO 00619985 Dishwasher Mounting Bracket Kit - Compatible with Bosch, Thermador, Gaggenau, Kenmore Dishwashers
Product Description
Secure your dishwasher with the replacement XPARTCO 00619985 Mounting Bracket Kit. This kit provides sturdy brackets to fasten select Bosch, Thermador, Gaggenau, and Kenmore dishwashers to kitchen cabinets or countertops, ensuring stability and preventing tipping. It addresses issues like loose mounting, excessive vibration, or noise during operation, offering a cost-effective alternative to OEM parts.
Note: Includes two mounting brackets and mounting screws (for top or side installation). Disconnect power before installation. Verify countertop or cabinet suitability for mounting.
Replaces part numbers: 00619985, 00628371, 00605007, 1567804, 605007, 619985, 628371, AH3478789, EA3478789, PS3478789, PD00000071, AP4538351, PS8728568.
Compatibility:
Compatible with models including but not limited to:
Bosch: SHX88PW55N/01, SHX89PW55N/01, SHX33M06UC/46, SHX33M05UC/46, SHX33M02UC/53, SHX33M02UC/52, SHX33M02UC/50, SHX33M02UC/46, SHEM3AY55N
Thermador: DWHD94EP/50
Gaggenau: Select models requiring 00619985
Kenmore: Select models requiring 00619985
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Bosch, Thermador, Gaggenau, and Kenmore dishwashers.
🔥 Specifications: replacement mounting bracket kit, includes two stainless steel brackets and two 1.5" hex-head screws for top or side mounting.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, wrench, work gloves; typically installed in 10–15 minutes.
🛡️ Effective Fixes: Resolves loose or unstable mounting, excessive vibration, or noise during operation.
Product Specification
Part Number: XP619985
Component Type: Mounting bracket kit
Material: Stainless steel
Weight: 3.0 oz (kit)
Mounting Hardware: Includes two 1.5" hex-head screws
Operating Conditions: Suitable for high-humidity kitchen environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dishwasher from the power source before installation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher stable and secure today!
Add to cart now for a budget-friendly fix!
