AAN73209838 Genuine OEM LG Washer Drain Pump & Cabinet Base Assembly
The AAN73209838 is a genuine LG OEM combined drain pump and cabinet base assembly for LG washers. This assembly bundles the washer's drain pump — which pumps water out of the drum and through the drain hose at the end of each cycle — together with the cabinet base structure it's mounted to. Because these two components ship together as one assembly, replacing this part addresses both the drain pump function and the base structure it sits in at the same time.
Common causes of failure include a worn or jammed drain pump motor, or physical damage or corrosion to the cabinet base itself over years of use. A failing assembly typically shows up as the washer failing to drain, unusual noise during the drain phase, or water leaking from underneath the unit.
Quick Answer
The AAN73209838 Genuine OEM LG Washer Drain Pump & Cabinet Base Assembly fixes LG washers that won't drain, make unusual noise during the drain phase, or are leaking water from underneath the unit. Combined drain pump and cabinet base assembly. This is a larger, heavier assembly than a standalone drain pump — installation involves more disassembly than a simple pump swap.
Common Problems This Part Fixes
Washer not draining — standing water left in the tub after a cycle
Unusual noise during the drain phase of the cycle
Water leaking from underneath the washer
Cycle stalling or failing to advance past the drain step
Visible damage or corrosion to the cabinet base structure
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AAN73209838, 4873470, 4985882, AHA75673401, AP6991753, AP6991765, EAP12580277, EAP16222263, FIX16222263, PS12580277, PS16222263, ALG51685, PD00091778
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This drain pump and cabinet base assembly is compatible with select LG top-load washers, including model numbers such as WT7060CW, WT7100CW, WT7250CW, WT7300CV, T1780WFHT, and T1789EFH5T/T1789EFH5U/T1789EFHT/T1789EFHKD variants.
Note: This is a combined assembly, not a standalone drain pump — if your washer only needs the pump replaced and the cabinet base is intact, ask our support team whether a standalone pump option is available for your model before ordering this larger assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified pump and base assembly
Combined drain pump and cabinet base assembly in a single part
Resolves "won't drain," "noisy drain phase," and "leaking underneath the washer" symptoms
Direct drop-in replacement — matches the original mounting and hose connections
Compatible with a range of LG top-load washer models
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AAN73209838
Part Type
Washer Drain Pump & Cabinet Base Assembly
Condition
Genuine OEM
Brand
LG
Application
Top-Load Washers
Function
Pumps water from the drum through the drain hose; provides the cabinet base structure
Repair Difficulty
Moderate to Hard — larger assembly than a standalone pump
Quantity
1 combined assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Remove Standing Water First Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. If there's standing water left in the tub from the original failure, remove as much as possible by hand with a cup or towel before starting the repair. Because this is a combined pump and cabinet base assembly rather than a standalone pump, access typically requires tipping the washer back or removing more of the cabinet than a simple pump swap — check your model's service diagram for the exact disassembly sequence, since it varies by model. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connections from the old assembly, remove the fasteners securing it to the washer frame, and carefully remove it, noting how the base supports the rest of the cabinet. Install the new AAN73209838 assembly in the same position, reconnect the drain hose connections securely, reconnect the electrical connector fully, and secure all mounting fasteners. Reassemble the cabinet in reverse order, restore the water supply and power, then run a cycle and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, socket set, pliers, towels or a small cup for removing standing water, work gloves.
Frequently Asked Questions
Do I need this whole assembly, or is there a smaller drain pump option for my model?
Some LG washer models offer a standalone drain pump as a separate, smaller part, while others require this combined pump-and-base assembly because the two are integrated on that particular platform. Check with our support team using your model number to confirm whether a standalone pump is available for your washer before ordering this larger assembly, since it can save you time and cost if a smaller part fits your model.
Why is this repair more involved than a typical drain pump replacement?
Because this part includes the cabinet base structure along with the pump, accessing and replacing it typically involves more disassembly than swapping a standalone pump alone — you're not just disconnecting a pump, you're also working with part of the washer's supporting frame. Budget more time for this repair than you would for a simple pump-only replacement, and consider having a second person help support the cabinet during removal and installation.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original pump design, hose connections, and cabinet base mounting configuration of the assembly originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 8318084 Washer Lid Switch Replaces WP8318084
The XPARTCO 8318084 is an aftermarket replacement lid switch assembly compatible with a wide range of Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Amana, Magic Chef, Crosley, and Admiral direct-drive top-load washing machines. The lid switch is a safety component located under the control panel at the top rear left corner of the washer — it detects whether the lid is open or closed and prevents the washer from spinning and agitating when the lid is open. When the lid is closed, the switch signals the control that it's safe to operate. Without a functioning lid switch, the washer may refuse to start, won't spin, won't agitate, won't drain, or stop advancing through its cycle.
Gray and white plastic housing. Electrical rating: 125–250V, 50–60Hz, 1/2 HP. Dimensions: 3"L x 2"W x 1-15/16"H. Features 3 flat terminals that the wiring harness plugs onto, plus a green grounding wire. It directly replaces WP8318084, WP8318084VP, AP3180933, AP6012742, AH886960, EA886960, EAP11745957, ES8084, TJ90ES8084, PD00002474, PN8318084, PS886960, PS11745957, and 11480-61. This is one of the most widely used lid switches across the Whirlpool direct-drive platform, fitting hundreds of top-load washer models. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO 8318084 Washer Lid Switch fixes Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Amana, and Crosley direct-drive top-load washers that won't start, won't spin, won't agitate, won't drain, won't advance through the cycle, or have a burning smell from the motor. Gray/white, 125–250V, 50–60Hz, 1/2 HP. 3"L x 2"W x 1-15/16"H. 3 flat terminals + green grounding wire. Replaces WP8318084, WP8318084VP, AP3180933, AP6012742, AH886960, EA886960, EAP11745957, ES8084, TJ90ES8084, PD00002474, PN8318084, PS886960, PS11745957. Classic symptom: won't spin but may still fill.
Common Problems This Part Fixes
Washer won't spin — the classic lid switch failure symptom on direct-drive washers
Washer won't start at all — control not detecting a closed lid
Washer won't agitate — lid switch blocking motor engagement
Washer won't drain — drain is tied to the spin/lid interlock on many models
Wash cycle not advancing past fill — stuck waiting for lid-closed signal
Burning smell from the motor area — motor stalling because the switch won't engage
Lid won't close properly or switch doesn't activate when lid is shut
Intermittent operation — washer sometimes works, sometimes doesn't, depending on lid position
Lid switch visibly cracked, broken, or with a failed lever
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer lid switch directly replaces the following OEM and cross-reference part numbers:
WP8318084, 8318084, WP8318084VP, ES8084, TJ90ES8084, 045903691979, 11480-61, PN8318084, AWP48129, EAP11745957, 11480-61, PN8318084, PD00002474, AP6012742, PS11745957.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid switch assembly is compatible with select direct-drive top-load washing machines from the following brands:
Whirlpool top-load washers — direct-drive models (including 1CLBR, 1CLSQ, 1CLSR, LSQ, LSR, LSW, WTW series and many more)
Kenmore and Kenmore Elite top-load washers (select Whirlpool-built models — 110-series)
KitchenAid top-load washers (select models)
Roper top-load washers (select models)
Estate top-load washers (select models)
Maytag top-load washers (select Whirlpool-built models)
Amana top-load washers (select models)
Magic Chef top-load washers (select models)
Crosley top-load washers (select models)
Admiral top-load washers (select models)
Note: This lid switch is specific to direct-drive top-load washers on the Whirlpool platform. It is NOT the same switch used on stacked laundry centers, washer/dryer combos, or front-load washers — those use different lid switch or door lock part numbers. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-drive washer lid switch assembly — detects whether the lid is open or closed and prevents spinning, agitating, and draining when the lid is open
Resolves "won't start," "won't spin," "won't agitate," "won't drain," "cycle not advancing," and "burning smell" symptoms caused by lid switch failure
Gray and white plastic housing — durable construction
Electrical rating: 125–250V, 50–60Hz, 1/2 HP
Dimensions: 3"L x 2"W x 1-15/16"H
3 flat terminals that the wiring harness plugs onto, plus a green grounding wire
Located under the control panel on the top rear left corner of the washer
One of the most widely used lid switches on the Whirlpool direct-drive platform — fits hundreds of top-load washer models
Replaces WP8318084, WP8318084VP, AP3180933, AP6012742, AH886960, EA886960, EAP11745957, ES8084, TJ90ES8084, PD00002474, PN8318084, PS886960, PS11745957, and 11480-61
Compatible with Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Amana, Magic Chef, Crosley, and Admiral direct-drive top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
8318084
OEM Part Number
WP8318084
Part Type
Washer Lid Switch Assembly (Direct-Drive Top-Load)
Condition
Aftermarket Replacement
Application
Direct-Drive Top-Load Washing Machines (Whirlpool platform)
Voltage
125–250V
Frequency
50–60 Hz
Motor Rating
1/2 HP
Dimensions
3"L x 2"W x 1-15/16"H
Terminals
3 flat terminals + green grounding wire
Color
Gray / White
Material
Plastic housing
Location
Under the control panel, top rear left corner
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Amana, Magic Chef, Crosley, Admiral
Installation Notes
⚠️ Unplug Washer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves to protect your hands. The lid switch is located under the control panel at the top rear left corner of the washer. To access it, you'll need to remove the control panel: on most direct-drive washers, use a putty knife or flat-blade screwdriver to release the spring clips at the bottom edge of the control panel (typically two clips), then flip the control panel up and back on its hinges to rest against the wall behind the washer. You should now see the lid switch mounted on the left side with two screws. Photograph the wiring before disconnecting. Unplug the wiring harness from the 3 flat terminals on the old lid switch — note how the harness connects. Remove the two mounting screws holding the old switch in place. Also disconnect the green grounding wire (it's attached separately with its own screw). Remove the old switch. Install the new 8318084 switch in the same position using the two mounting screws. Reconnect the green grounding wire with its screw. Plug the wiring harness back onto the 3 flat terminals, matching your photos. Flip the control panel back down and press it into place until the spring clips snap. Plug the washer back in and test by closing the lid and running a cycle — confirm the washer starts, agitates, spins, and drains. Tools needed: Phillips screwdriver, putty knife or flat-blade screwdriver (for spring clips), work gloves.
Frequently Asked Questions
My washer won't spin but still fills — is the lid switch the problem?
Very likely, yes. On direct-drive top-load washers, the lid switch is a safety interlock that prevents spinning and agitating when the lid is open. When the switch fails, the control never receives the "lid closed" signal, so it blocks the spin (and often the agitate and drain) as a safety measure — but filling still works because that doesn't require the lid interlock. If your washer fills but won't advance past that point, or agitates but refuses to spin, the lid switch is the prime suspect. You can confirm by testing the switch for continuity with a multimeter when the lever is pressed — a working switch shows continuity when activated.
Why would a bad lid switch cause a burning smell?
This happens when the motor tries to engage but the lid switch isn't signaling correctly, causing the motor to stall or repeatedly attempt to start without completing the cycle. A stalling direct-drive motor generates heat that produces a burning smell. If you notice a burning smell AND the washer isn't spinning or agitating properly, check the lid switch first — it's far more likely (and cheaper) than a motor failure. If the burning smell continues after replacing the switch, have the motor and motor coupling inspected by a technician.
What's the difference between 8318084 and WP8318084?
These are the same lid switch across production revisions. 8318084 was the original part number and WP8318084 is the Whirlpool-era part number (with the "WP" prefix Whirlpool adopted). WP8318084VP is a variant packaging code. All are physically and functionally identical — if your washer's parts diagram shows any of these numbers, this listing is the correct replacement. The many additional cross-references (AP3180933, AP6012742, ES8084, PS886960, PS11745957, etc.) are catalog identifiers from various parts distributors for the same switch.
Does this fit my stacked laundry center or front-load washer?
No — the 8318084 is specifically designed for standalone direct-drive top-load washers on the Whirlpool platform. Stacked washer/dryer laundry centers use different lid switch part numbers (such as the 3355806 for Whirlpool thin twin units), and front-load washers use door lock assemblies instead of lid switches. Always search by your appliance's model number to confirm the correct part. Contact our support team with your model number if you're unsure which switch fits your machine.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications (125–250V, 50–60Hz, 1/2 HP), dimensions (3"L x 2"W x 1-15/16"H), 3-flat-terminal configuration, grounding wire, and lid-detection function of the original WP8318084 lid switch used in compatible Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Amana, and related direct-drive top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10528947 Washer Drive Hub Kit
The XPARTCO W10528947 is an aftermarket replacement washer basket drive hub kit compatible with select top-load washing machines from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. The drive hub is a critical transmission component that connects the spin basket to the spin shaft, transferring power from the motor to rotate the wash basket and agitate laundry during each cycle.
This kit includes one basket drive hub and one drive block retainer — everything needed to restore proper spinning and agitation function. Common causes of drive hub failure include normal wear over time, strain from heavy or unbalanced loads, and physical damage from impact. A worn or cracked hub typically results in the basket slipping, failing to spin, or producing loud clicking and grinding noises during operation.
Quick Answer
The XPARTCO W10528947 Washer Drive Hub Kit fixes washers that won't spin, spin weakly, make clicking or grinding noises, or leave clothes too wet after the cycle. It connects the spin basket to the spin shaft and is compatible with select Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis top-load washers.
Common Problems This Part Fixes
Washer not spinning or agitating at all
Weak or slow spin — clothes coming out too wet
Clicking, grinding, or loud noises during spin cycle
Basket slipping under load
Washer pumping but not spinning
Excessive shaking or movement during operation
Replaces Part Numbers
This kit directly replaces the following OEM and cross-reference part numbers:
W10528947, 2684908, W10396887, W10528947VP, W11771931, EAP6012095, AWP40580, PD00024946, AP5665171, PS6012095.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drive hub kit is compatible with select top-load washers from the following brands:
Whirlpool top-load washers
Maytag top-load washers (including Bravos series)
Kenmore top-load washers (select models)
Amana top-load washers
Admiral top-load washers
Crosley top-load washers
Inglis top-load washers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Connects the spin basket to the spin shaft — restoring proper agitation and spin performance
Aftermarket replacement built to OEM-equivalent quality standards
Kit includes one basket drive hub and one drive block retainer for a complete repair
Made from durable plastic construction designed to withstand regular wash cycle stress
DIY-friendly repair — installs with basic hand tools in 30–60 minutes
Budget-friendly alternative to OEM at a lower cost without sacrificing performance
Product Specifications
Part Number
W10528947
Part Type
Washer Basket Drive Hub Kit
Condition
Aftermarket Replacement
Application
Top-Load Washing Machine
Material
Durable Plastic (ABS)
Hub Dimensions
3-5/8" Diameter x 13/16" H
Retainer Clip Length
2-7/8"
Kit Includes
1 Basket Drive Hub + 1 Drive Block Retainer
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, Inglis
Installation Notes
⚠️ Safety First — Disconnect Power and Water Before Starting Unplug the washer from the power source and shut off the hot and cold water supply valves before beginning any repair. Remove the agitator or impeller (depending on your model) to access the drive hub. Unscrew the old hub and retainer, install the new drive hub kit in the same position, and reassemble the washer. Tools needed: multi-bit screwdriver, 7/16-inch socket with extension, and a nut driver. Allow 30–60 minutes for a complete repair. Consult your washer's service manual for model-specific instructions.
Frequently Asked Questions
Will the W10528947 fit my washer?
This kit is compatible with select top-load washers from Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, and Inglis. Always verify your washer's model number before ordering. Contact our support team if you need help confirming compatibility.
What does the drive hub do?
The drive hub connects the spin basket to the spin shaft beneath the agitator. It transfers power from the motor to rotate the wash basket during the spin and agitation cycles. When the hub wears out or cracks, the basket can slip or stop spinning entirely.
What are the signs that my drive hub needs replacement?
Common signs include: the washer won't spin or agitate, the spin cycle is weak or slow, clothes come out too wet, or you hear clicking and grinding noises during operation. Excessive shaking or movement during the cycle can also indicate a worn hub.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is designed to deliver reliable, long-lasting performance at a more affordable price point.
What is included in the kit?
The kit includes one basket drive hub and one drive block retainer — the two components needed for a complete drive hub replacement.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. Our team is available to help you verify compatibility before you buy.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH01X20826 Washing Machine Shock Absorber
The XPARTCO WH01X20826 is an aftermarket replacement shock absorber (damper) for GE front-load washers. The wash tub inside a front-load washer hangs suspended inside the cabinet, and a set of these shock absorbers is what controls that movement — dampening the tub's vibration and motion during spin so it doesn't bang against the cabinet or shake the whole machine. These washers typically use four shock absorbers working together around the tub, and this listing is for a single individual shock absorber.
Over time the internal damping material in these shocks wears out, or the shock can physically separate from its mounting point — something that can also happen if the washer is moved or shifted without the tub properly secured first. Because all four shocks on a given washer are typically the same age and under the same stress, if one has failed the others are often not far behind — many technicians recommend ordering four of this same part and replacing the full set together as a preventative measure. A worn or detached shock absorber produces a very recognizable symptom: excessive vibration, shaking, or banging noise during the spin cycle, sometimes strong enough that the washer visibly moves or "walks" across the floor. It directly replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
Quick Answer
The XPARTCO WH01X20826 Washing Machine Shock Absorber fixes GE front-load washers (and select Hotpoint, Haier, Monogram, Café, and Kenmore models built on the GE platform) that vibrate, shake, or bang excessively during spin, or seem to "walk" across the floor. Sold as a single individual shock absorber. Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. These washers use four shock absorbers total — if one has failed, order four of this part to replace the full set, since they wear on the same schedule.
Common Problems This Part Fixes
Excessive vibration or shaking during the spin cycle
Loud banging or knocking noise from inside the cabinet during spin
Washer that seems to "walk" or move across the floor during operation
Tub striking the cabinet frame or nearby panels
Shock absorber that has visibly separated or detached from its mounting point
Noise or vibration that started or worsened after the washer was moved or relocated
Visible wear, cracking, or looseness in the shock absorber material
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washing machine shock absorber directly replaces the following OEM and cross-reference part numbers:
WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shock absorber is compatible with select GE front-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: GE uses several different shock absorber part numbers across its washer lineup, including separate parts such as WH01X10727 and WH03X29516 for other platforms. This WH01X20826 shock is specific to the front-load models listed above and is not interchangeable with those other GE shocks. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement shock absorber — dampens tub vibration and movement during spin
Sold individually — order four to replace the full set on a typical front-load washer
Resolves "excessive vibration," "banging or knocking noise," and "washer walking across the floor" symptoms caused by worn or detached shocks
Durable plastic and rubber construction for long-term damping performance
Direct drop-in replacement — no modification required
Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
Compatible with GE, Hotpoint, Haier, Monogram, Café, and select Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWH01X20826
OEM Part Number
WH01X20826
Part Type
Washing Machine Shock Absorber (Damper)
Condition
Aftermarket Replacement
Application
GE Front-Load Washers
Material
Plastic and rubber
Function
Dampens tub vibration and movement during spin
Typical Quantity Per Washer
4 (this listing is for 1 individual shock)
Quantity
1 shock absorber
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Consider Replacing All Four Shocks Together Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access to the shock absorbers typically requires removing the top and/or front panel of the washer to reach the tub suspension points — check your model's service diagram, since access varies. Photograph how each old shock absorber connects to the frame and the tub before removing anything, since these components are symmetrical around the tub and easy to reverse or mismatch. Disconnect the old shock absorber from its mounting point at both the frame and tub ends, and remove the mounting pin. Install the new shock absorber in the same position with its mounting pin, matching the original orientation. If you're only replacing one shock, be aware the remaining three original shocks are the same age and under the same stress — many technicians recommend ordering three more of this same part and replacing all four together to avoid reopening the washer again soon after. Once installed, gently rock the tub by hand to confirm even resistance at each corner before reassembling the panels. Restore power and run a full spin cycle to confirm the vibration, shaking, or banging noise has resolved. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Do I need to order more than one of these?
This listing is for a single shock absorber, but GE front-load washers use four of them working together around the tub. If one has failed, it's strongly worth ordering four total and replacing the full set, since all four are typically the same age and have been under the same stress — replacing just one risks having to reopen the washer again soon after for the next one.
My washer started shaking right after I moved it to a new spot. Is that related?
Yes, this is a documented cause of shock absorber problems on this platform. If the tub wasn't properly secured or the washer was tilted significantly during a move, one or more shock absorbers can separate from their mounting point. Check that all four shocks are still properly connected at both ends before assuming a shock itself has failed — sometimes reseating a separated shock is all that's needed, though if it shows wear it's worth replacing regardless.
How much vibration is normal, and how do I know it's actually the shocks?
Some vibration during high-speed spin is normal, especially with an unbalanced load. But vibration strong enough to move the washer across the floor, or accompanied by a banging or knocking noise from inside the cabinet, points to a suspension problem rather than a simple unbalanced load. Try redistributing the laundry evenly in the drum and running the spin cycle again — if the shaking persists with a balanced load, inspect the shock absorbers for wear, cracking, or separation.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, mounting configuration, and damping performance of the original WH01X20826 shock absorber used in compatible GE, Hotpoint, Haier, Monogram, Café, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH49X27322 Washer Transmission Platform Assembly Kit
The Genuine OEM GE WH49X27322 is the transmission platform assembly and nut kit for select GE washer-dryer combo units. The platform supports the transmission and keeps it aligned with the drum. When it wears, cracks or shifts out of alignment, the unit can make clunking or grinding noises during the spin cycle or vibrate heavily.
This is the original GE part, not an aftermarket equivalent. It is sold as a kit. Check your model number before ordering.
Quick Answer
The Genuine OEM WH49X27322 Transmission Platform Assembly Kit replaces the transmission platform and nut on a compatible GE washer-dryer combo when the platform has worn or failed. Classic symptoms: loud clunking or grinding during the spin cycle, or excessive vibration.
Common Problems This Part Fixes
Loud clunking or grinding noise during the spin cycle
Excessive vibration or shaking
Worn, cracked or misaligned transmission platform
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This transmission platform kit is listed under the following part number:
WH49X27322, 4588460, AGE26889, AP6328404, EAP12343556, PD00053354, PS12343556
If your old platform shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This kit is listed for GE washer-dryer combo units, including these examples:
GE GUD24ESSM0WW, GUD24ESSM1WW, GUD24GSSM0WW, GUD24GSSM1WW
GE GUD27ESSM0WW, GUD27ESSM1WW, GUD27GSSM0WW, GUD27GSSM1WW, GUD27ESPM0DG, GUD27GSPM0DG
GE GUV27ESSM0WW, GUV27ESSM1WW, XUD27ESSM0WW, XUD27GSSM0WW
Note: The models above are a sample of 27 that retailers list, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE part, not an aftermarket equivalent
Transmission platform assembly and nut kit
Supports the transmission and keeps it aligned with the drum
Sold as a kit
Product Specifications
Part Number
WH49X27322
OEM Part Number
WH49X27322
Part Type
Washer Transmission Platform Assembly Kit
Condition
Genuine OEM
Manufacturer
GE
Quantity
1 Kit
Application
Select GE Washer-Dryer Combos
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the unit and turn off the water supply before you begin. This repair involves the transmission area and is best done with a second person and your model's service guide. Remove the cabinet panels to reach the transmission, remove the screws holding the old platform, install the new platform with the drum and transmission aligned, and secure it with the nut and screws. Reassemble, restore power and water, and run a test cycle.
Frequently Asked Questions
My unit clunks or grinds on spin. Is this the part I need?
It can be. A worn or cracked platform can cause noise and vibration, but worn bearings, drive parts or a loose load can cause similar symptoms. Confirm the platform is the problem before replacing it.
Is this an OEM or aftermarket part?
This is a genuine OEM part from GE, not an aftermarket equivalent.
What is in the kit?
It is sold as the transmission platform assembly and nut kit. Retailers do not list the exact contents, so contact our support team if you need to confirm them before ordering.
Will this fit my washer-dryer?
It is listed for 27 GE washer-dryer combo models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WH42X10650 Washer Control Panel, White
Replaces Part Numbers: WH42X10650, AP3995175, 1264621, AH1482468, EA1482468, PS1482468.
The WH42X10650 is a genuine GE replacement part, specifically designed as a control panel for GE washing machines. It houses and operates the control buttons and display, ensuring compatibility and reliability for your appliance.
EXP572 Dryer Door Catch – Aftermarket Replacement for Whirlpool, Kenmore, Maytag, GE, Hotpoint
Product Overview
This Door Catch is a replacement part for specific GE, Hotpoint dryer models. It includes the door catch. This part ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently. Common causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly
Replaces Part Numbers
WE1M1011, PS3502777, AP5324728, WE01M0197, WE01X0889, WE01X0903, WE01X1032, WE1M187, WE1M197, WE1M536, WE1X1032, WE1X889, WE1X903. It provides a reliable fit and function similar to OEM components.
Fixes the Following Issues
Dryer door won’t stay closed
Dryer doesn’t start
Door pops open mid-cycle
Worn or damaged door catch
Compatible Brands
Compatible with dryers made by Whirlpool, Kenmore (Whirlpool-built), Maytag, Amana, Roper, Estate, GE and Crosley. Suitable for many front-load and top-load residential models.
Why Buy from Parts-O-Matic
High-quality, durable replacement part
Always Fast and Free U.S. shipping
Easy to install – no special tools required
Trusted by appliance repair professionals and DIYers
WH01X29528 Genuine OEM GE Washer Door Lock
The WH01X29528 is a genuine GE OEM door lock assembly for GE front-load washers and select GE Ultrafast 2-in-1 combo washer/dryers. This is a safety mechanism, not just a switch: when the door closes, the lock engages automatically and secures the door shut for the full length of the cycle, only releasing once the control confirms it's safe to open. This prevents the door from being opened mid-cycle, which would otherwise let water and detergent spill out and create both a mess and a safety hazard.
Rated 120VAC, 60Hz, 16A. Over time, the door lock can fail from physical damage or ordinary wear, and when it does, the symptoms can be wide-ranging: a washer that won't start because the control never confirms the door is locked, a cycle that stops partway through, a door that won't unlock at the end of a cycle, or in some cases excessive noise and shaking during operation since the lock also plays a role in keeping the door assembly seated correctly. It directly replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, and 0024000128GE. As a genuine OEM part, the WH01X29528 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WH01X29528 Genuine OEM GE Washer Door Lock fixes GE front-load washers and GE Ultrafast combo washer/dryers where the door won't lock, the washer won't start, the door pops open or unlocks unexpectedly during the cycle, or the cycle stops partway through. 120VAC, 60Hz, 16A. Replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, 0024000128GE. Before replacing, try a power reset — unplug the washer for 30 seconds and plug it back in — or hold Start/Pause for 15 seconds to command the control to release the lock; either can resolve a door stuck locked without needing a new part.
Common Problems This Part Fixes
Washer won't start because the door lock never confirms as locked
Door lock fails to engage, or the door pops open after locking
Door unlocks unexpectedly during the wash cycle
Cycle stops or interrupts partway through
Door won't unlock at the end of a completed cycle
Excessive noise or shaking during operation related to a loose door seal
Error code related to the door lock displayed on the control panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer door lock directly replaces the following OEM and cross-reference part numbers:
WH01X29528, 4958749, AP6985313, PS12749276, EAP12749276, PD00060769, ITW 12070-71, V13305, AGE26402, PD00060769, 0024000128GE
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door lock is compatible with select GE front-load washers and GE Ultrafast 2-in-1 combo washer/dryers, including model numbers such as:
GFW510SCN0WW, GFW510SCN1WW, GFW510SCN2WW, GFW510SCN3WW, GFW510SCN4WW, GFW510SCN5WW
GFW550SPN0DG, GFW550SPN2DG, GFW550SSN1WW
GFW650SPN1SN, GFW650SPN2SN, GFW650SSN2WW, GFW650SSN3WW
GFW655SSV0WW, GFW655SPV0WW
GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS, GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW, GFW850SSN4WW, GFW850SSN5WW
PFQ97HSPV0DS (GE Ultrafast 2-in-1 combo washer/dryer)
PFW870SPV0RS, PFW870SSV0WW
PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS
Note: Always verify your full model number before ordering, since GE uses several different door lock assemblies across its front-load washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified locking mechanism and switch design
Safety lock that secures the door shut for the full length of the wash cycle
Resolves "won't lock," "won't start," "door pops open," and "cycle interruptions" symptoms caused by lock failure
Rated 120VAC, 60Hz, 16A
Direct drop-in replacement — matches the original mounting and harness connector
Replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, and 0024000128GE
Compatible with GE front-load washers and GE Ultrafast 2-in-1 combo washer/dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WH01X29528
Part Type
Washer Door Lock Assembly
Condition
Genuine OEM
Brand
GE
Application
Front-Load Washers, GE Ultrafast Combo Washer/Dryers
Voltage
120VAC
Frequency
60 Hz
Current Rating
16A
Function
Locks the door shut during the wash cycle; releases when the control confirms it's safe
Quantity
1 door lock assembly
Compatible Brand
GE
Installation Notes
⚠️ Unplug Washer Before Starting — Try A Power Reset First If The Door Is Stuck Locked Before replacing the part, try the simplest fixes first. Unplug the washer, wait 30 seconds, and plug it back in to let the control fully reboot — a simple power reset can release an operational lock and clear the problem without any disassembly. If that doesn't work, try holding the Start/Pause or Power button for 15 seconds to command the control to unlock the door; this doesn't always succeed but is quick to try before opening up the washer. If the door is still locked and you need physical access, never work on the appliance while it's connected to power. Once you've confirmed replacement is necessary, disconnect power at the outlet or shut off the circuit breaker. Wear work gloves. Access is typically from the front, working around the door boot/gasket to reach the lock assembly mounted to the front panel. Photograph the wiring harness connector and mounting position before disconnecting anything. Disconnect the harness connector from the old lock, remove its mounting screws, and pull it free. Install the new WH01X29528 in the same position, secure the mounting screws, and reconnect the harness connector fully. Reseat the door boot/gasket if it was disturbed, restore power, and run a test cycle to confirm the door locks, stays locked through the cycle, and releases normally at the end. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My washer's door is stuck locked. Do I need to replace this part right away?
Not necessarily — try the simple resets first. Unplug the washer for 30 seconds and plug it back in to let the control fully reboot, which can release an operational lock on its own. If that doesn't work, try holding the Start/Pause or Power button for 15 seconds, which commands the control to release the lock electronically. These steps resolve many stuck-door situations without needing to replace the lock assembly at all.
My washer won't start. Is that this part?
It's a strong possibility. The control won't begin a cycle until it receives confirmation that the door is locked, so if this lock has failed and isn't sending that signal, the washer will simply refuse to start even though everything else appears normal. Try the power reset steps above first, then check for a door lock-related error code on the display before assuming the part has failed.
I already replaced this lock once and it failed again. What should I check?
If a newly replaced lock fails again relatively quickly, it's worth having the washer's control board checked, since a board that's sending incorrect signals to the lock can cause repeat failures that look like the lock itself is bad. It's also worth confirming the door boot/gasket is seated correctly, since a misaligned door can put uneven stress on the lock mechanism.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same locking mechanism, switch design, and harness connector as the door lock originally installed in your GE front-load washer or Ultrafast combo washer/dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH11X39237 Washer Drain Pump
The XPARTCO WH11X39237 is an aftermarket replacement drain pump and filter assembly compatible with select GE, GE Profile, and GE 2-in-1 Washer/Dryer Combo front-load washers in the GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series. The drain pump is responsible for removing water from the washer drum during the drain and spin cycles — when it fails, the washer will not drain, will leave standing water in the drum, or will produce unusual noises during the drain cycle.
This complete drain pump and filter assembly operates at 120V, 60Hz, 1.2A and includes the pump motor, impeller housing, and integrated filter. It directly replaces the discontinued WH11X29539 — WH11X39237 is the current manufacturer-approved updated part number. Also replaces AP6986715, 4962370, B25-3A04, and several additional cross-reference numbers. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO WH11X39237 Washer Drain Pump fixes GE front-load washers that won't drain, leave standing water in the drum, display drain error codes, or make loud humming or grinding noises during the drain cycle. Complete pump and filter assembly. 120V/60Hz/1.2A. Replaces discontinued WH11X29539. Compatible with GE GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series.
Common Problems This Part Fixes
Washer not draining — standing water remaining in the drum after a cycle
Drain error codes displayed on GE front-load washers (e.g. E23, E24, or pump-related codes)
Loud humming, grinding, or buzzing noise during the drain cycle
Washer stopping mid-cycle due to a drain fault
Water leaking from around the drain pump area
Drain pump running continuously but water not being expelled
Pump impeller jammed by debris and motor burned out
Replaces Part Numbers
This drain pump directly replaces the following OEM and cross-reference part numbers:
WH11X39237, WH11X29539, Hanyu B25-3A04, 9019841, PD00094541, AGE1260100, AP8054992, PS18351790.
WH11X39237 is the current manufacturer-approved replacement for the discontinued WH11X29539. If your appliance documentation lists WH11X29539, this is the correct updated part.
Compatibility
This drain pump is compatible with select front-load washers and laundry combos from the following GE product lines:
GE front-load washers — GFW510 series
GE front-load washers — GFW550 series
GE front-load washers — GFW650 series
GE front-load washers — GFW655 series
GE front-load washers — GFW850 series
GE Profile front-load washers — PFW870, PFW950, PFW955 series
GE Profile front-load washers — PFQ83 series
GE 2-in-1 Washer/Dryer Combo (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Complete drain pump and filter assembly — pump motor, impeller housing, and integrated filter all included
Removes water from the drum during drain and spin cycles for proper washer operation
Integrated filter traps lint, coins, and debris to prevent pump impeller damage and clogs
Electrical specs: 120V, 60Hz, 1.2A — correct for compatible GE front-load models
WH11X39237 is the current manufacturer-approved replacement for discontinued WH11X29539
Direct replacement — installs into existing pump housing with no modification required
Aftermarket replacement built to OEM-equivalent quality standards
Compatible with GFW510, GFW550, GFW650, GFW655, GFW850, PFW, and PFQ series
DIY-friendly repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
WH11X39237
Supersedes
WH11X29539 (discontinued)
Part Type
Washer Drain Pump and Filter Assembly
Condition
Aftermarket Replacement
Application
GE Front-Load Washers and 2-in-1 Washer/Dryer Combos
Voltage
120V AC
Frequency
60 Hz
Amperage
1.2A
Includes
Pump motor, impeller housing, and integrated filter
Compatible Series
GFW510, GFW550, GFW650, GFW655, GFW850, PFW870, PFW950, PFW955, PFQ83
Compatible Brands
GE, GE Profile
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning any repair. Place towels and a shallow pan under the pump access area to catch residual water. Remove the front lower access panel of the washer. Before removing the pump, first clean the pump filter (WH23X38617) and check for a clogged filter or debris in the pump housing — a jammed impeller is sometimes mistaken for a failed pump. If the pump motor is confirmed failed, disconnect the wire harness and drain hoses from the old pump assembly, then unscrew or unclip the pump from the mounting bracket. Install the new WH11X39237 pump assembly, reconnect the drain hoses and secure with clamps, reconnect the wire harness, and reinstall the access panel. Restore power and water supply, then run a drain-only cycle to verify proper drainage and check for leaks. Tools needed: Phillips screwdriver, pliers, shallow pan or towels.
Frequently Asked Questions
What is the difference between WH11X39237 and WH11X29539?
These are the same drain pump assembly — WH11X39237 is the current updated part number that GE issued to replace the discontinued WH11X29539. If your washer's documentation, parts diagram, or old pump label shows WH11X29539, the WH11X39237 is the correct replacement to order.
Should I check the pump filter before replacing the drain pump?
Yes — always check and clean the pump filter (WH23X38617) before replacing the drain pump. A heavily clogged filter can restrict water flow enough to mimic pump failure symptoms, and a foreign object jammed in the impeller can stall the pump motor without permanently damaging it. Remove the filter, clear any debris from the housing and impeller, and test the washer again. If the pump still fails to drain after cleaning, then pump replacement is the next step.
How do I know if my drain pump has failed?
A failed drain pump typically causes the washer to stop mid-cycle with a drain error code, or to finish a cycle with standing water in the drum. You may also hear a loud humming noise during the drain phase — this indicates the motor is running but the impeller is not turning (jammed or broken). A grinding noise suggests physical damage to the impeller or pump housing. If the pump is completely silent during the drain cycle despite power being delivered to it, the motor has likely burned out.
Is the WH11X39237 compatible with GE Profile and GE 2-in-1 models?
Yes — the WH11X39237 is compatible with select GE Profile front-load washers in the PFW870, PFW950, PFW955, and PFQ83 series, as well as select GE 2-in-1 Washer/Dryer Combo models. Always verify your specific model number before ordering to confirm compatibility.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the electrical specifications and physical dimensions of the original WH11X39237 drain pump assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH08X37938 Washer Lid Switch Assembly
The WH08X37938 is a genuine OEM lid switch (lid lock) assembly from GE for GE and Hotpoint top-load washers, also used on select Kenmore models. The assembly locks the lid while the washer is running and releases it when the cycle ends, and it tells the control board the lid is closed and it's safe to run. When it wears out, cracks, or fails electrically, the washer may refuse to start, stop in the middle of a cycle, show a lid or door lock error, or fail to lock the lid at all.
This assembly replaces the original lock and switch as a unit, so you do not have to diagnose which internal contact has failed. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. It mounts on the washer cabinet with an electrical connector and is a straightforward repair, usually done in under an hour.
Quick Answer
The Genuine OEM WH08X37938 Lid Switch Assembly fixes a GE or Hotpoint top-load washer that won't start, stops mid-cycle, won't lock the lid, or shows a lid or door lock error because the lid lock is worn or has failed. Complete replacement lock and switch assembly, genuine OEM. Classic symptom: you close the lid and nothing happens, or the washer starts then stops and signals a lid or lock fault.
Common Problems This Part Fixes
Washer won't start when the lid is closed
Washer stops partway through the wash, rinse, or spin
Lid will not lock, or stays locked after the cycle ends
Lid or door lock error codes
Loose, cracked, or visibly damaged lid lock
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This lid switch assembly replaces the following part numbers:
WH08X37938, WH08X32697, WH02X24399, WH08X32657, WH01X26694, WH01X24112, WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X31222, 290D1580P001, 290D1580P002, 290D1580P003, 290D1580P004, 290D3070P001, EG-380843 M, AGE26076, AP7225583, EAP17626546, OEM21676758, PD00087323, PS17626546
These are earlier GE numbers for the lid lock, as the part was updated over time. If your old lock or parts diagram shows any of them, match against this list.
Compatibility
This assembly is listed for select top-load washers from:
GE and Hotpoint, including GTUN275EM0WW, GTUN275GM0WW, GTUP240EM0WW, and GTUP240EM2WW
Kenmore, including 363.71542211, 363.71542310, and 363.71542410
Note: The model list above is only a sample, and lid locks differ between GE washer generations. Confirm fit by matching the number on your old lock or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This part is for top-load washers.
Key Features
Genuine OEM GE lid switch (lid lock) assembly, not an aftermarket equivalent
Replaces the lock and switch as a unit, with no need to find the failed contact
Restores starting, locking, and unlocking at the end of the cycle
Cross-references to WH08X32697, WH08X31577, and other earlier GE numbers
Fits select GE, Hotpoint, and Kenmore top-load washers
Mounts on the cabinet with a plug-in electrical connector
Product Specifications
Part Number
WH08X37938
OEM Part Number
WH08X37938
Part Type
Washer Lid Switch (Lid Lock) Assembly
Condition
Genuine OEM
Application
Select GE, Hotpoint & Kenmore Top-Load Washers
Installation Notes
⚠️ Unplug Power and Shut Off Water Unplug the washer and turn off the water supply before starting. Work gloves are recommended. Open the lid and, following your model's service guide, remove the top panel or cabinet section to reach the lid lock mounted on the cabinet. Note the position of the old assembly, disconnect its wiring connector, and remove the screws holding it in place. Fit the new assembly in the same position, secure it, and reconnect the connector. Reassemble the washer, restore power and water, and run a short cycle to confirm the lid locks, the washer starts, and the lid releases at the end.
Frequently Asked Questions
My washer won't start with the lid closed. Is this the part I need?
A failed lid lock is a common cause. The control board won't start a cycle unless it sees the lid is closed and locked. Check that the lid closes fully and that nothing is blocking it. If it still won't start, the lid lock is a likely cause.
Is a lid switch the same as a lid lock?
On these washers, the lid switch and lock are combined in one assembly, which this part replaces.
My old part is marked WH08X32697 or WH08X31577. Will this work?
Those numbers are on the Replaces list. Compare the connector and mounting against your old part, or contact our support team with your model number and we'll confirm.
Will this fit my front-load washer?
No. This is for top-load washers.
Is this an OEM part?
Yes. This is a genuine OEM GE part, not an aftermarket equivalent, so it matches the original factory fit and specification.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WH16X26913 Washer Genuine OEM Suspension Rod and Spring
Rod and spring asm right- black
Description: The Rod and Spring Asm Right-Black is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles.
Replaces Parts Numbers: WH16X26913, WH16X26714, AP6331892, PS12343383.
California Residents only
WARNING: California’s Proposition 65
MDS66290824 Genuine OEM Washer Door Gasket
The Genuine OEM MDS66290824 is a factory-original door boot gasket manufactured by LG for use in LG front-load washers and washer-dryer combo units. The gasket forms the watertight seal between the door, cabinet, and tub, flexing with every door open/close cycle while keeping wash water contained inside the drum. As the rubber ages, it commonly cracks, tears, or develops mold/mildew buildup in its folds, and a compromised seal leads directly to water leaking out around the door during the wash or spin cycle.
This is a current-production part: MDS66290824. As the genuine LG part, it ships in factory black rubber matching the original color, fold pattern, and mounting groove, so it seats and seals exactly like the original.
Quick Answer
The Genuine OEM MDS66290824 Washer Door Gasket fixes LG front-load washers and washer-dryer combo units that leak water around the door, or that have a cracked, torn, or moldy door boot seal. Classic symptom: water pooling on the floor in front of the washer after a cycle, with visible cracking or gaps in the door seal.
Common Problems This Part Fixes
Water leaking from around the door during the wash or spin cycle
Visible cracks, tears, or splits in the door boot rubber
Mold or mildew buildup trapped in the gasket folds that won't clean out
Door boot pulling away from its mounting groove on the cabinet or tub
Musty odor coming from the washer even after cleaning
Door won't seal fully closed due to a warped or damaged gasket
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This door gasket directly replaces the following OEM and cross-reference part numbers:
MDS66290824, 4963077, 4981902, AP6993434, ALG55389, AP7212758, EAP16224172, EAP16879236, PD00084356, PS16224172, PS16879236.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door gasket is compatible with select LG front-load washers and washer-dryer combo units, including:
LG W3S1CVK2EHM, W3S1CVK2ENS, W3S1CVK2EVS, W3S1CVK2RNS, W3S1CVK2RVS
LG WKEX200HBA, WKEX200HGA, WKEX200HWA
LG WKGX201HBA, WKGX201HGA, WKGX201HWA
LG WM4500HBA, WM5500HVA, WM5700HVA
LG F3S1CWK2WN and related WashTower/combo dryer units sharing this door assembly
Note: If your parts diagram or old part still shows MDS66290803, this current MDS66290824 gasket is the correct replacement — the earlier revision has been superseded and is no longer produced new. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM door boot gasket — factory-original fit, seal, and color match
Resolves "leaking around the door," "cracked/torn boot," and "moldy seal" symptoms
Current production part — supersedes the earlier MDS66290803 revision
Black rubber construction matching original factory appearance
Approximately 13"W x 15"L x 10"H, ~3 lb 1 oz
Replaces MDS66290824, MDS66290803, 4963077, 4981902, AP6993434, ALG55389, AP7212758, EAP16224172, EAP16879236, PD00084356, PS16224172, PS16879236
Compatible with select LG front-load washers and washer-dryer combo units
Genuine OEM part — factory-specified rubber compound and mounting groove fit
Product Specifications
Part Number
MDS66290824
OEM Part Number
MDS66290824
Part Type
Washer Door Boot Gasket
Condition
Genuine OEM Replacement
Color
Black
Material
Rubber/elastomer gasket seal
Dimensions
Approx. 13"W x 15"L x 10"H
Weight
Approx. 3 lb 1 oz
Compatible Brand
LG
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power before beginning. Open the door and locate the large outer retaining band (spring clamp) holding the gasket to the front cabinet panel — release it with pliers or a flat-blade screwdriver and pull the gasket's outer lip free from the cabinet opening. Working around the boot, fold the gasket into the drum opening to access the inner retaining band securing it to the tub; release this band as well and remove the old gasket. Check for and transfer any small parts such as the drain/pressure sensor port fitting if your model routes one through the boot. Fit the new MDS66290824 gasket's inner lip into the tub-side mounting groove first, working it evenly around the full circumference, then reinstall the inner retaining band. Fold the gasket back out and seat the outer lip into the cabinet opening, aligning it evenly, then reinstall the outer retaining band. Restore power and run a cycle with the door closed to check for leaks around the full perimeter of the seal. Tools needed: pliers or a flat-blade screwdriver, and a spring clamp tool if your model uses a wire-spring outer band.
Frequently Asked Questions
Is MDS66290824 the same as MDS66290803?
MDS66290824 is the current genuine LG gasket, and it supersedes the earlier MDS66290803 revision, which is no longer produced new. If your washer's parts diagram or old gasket shows MDS66290803, this MDS66290824 is the correct current replacement — LG has updated the part number but the fit and function for your model remain the same.
My washer is leaking water from the door — is this the part I need?
In most cases, yes. A worn, cracked, or torn door boot gasket is the most common cause of water leaking around the door on a front-load washer. Inspect the gasket's folds closely for splits or debris (coins, small items) caught in the seal, since a foreign object trapped in the boot can also prevent a full seal without the gasket itself being damaged.
Do I need to transfer any parts from my old gasket?
Check whether your model routes a drain hose fitting, pressure sensor port, or door lock striker through the boot itself. If so, that fitting typically transfers from the old gasket to the new one, or is a separate reusable part — inspect your old gasket carefully before disposal in case a component needs to be moved over.
Can I clean mold out of the gasket instead of replacing it?
Light surface mold can often be cleaned with a diluted bleach or vinegar solution and a soft brush, and running the washer's tub-clean cycle regularly helps prevent it from returning. However, if mold has caused the rubber to degrade, crack, or lose its seal, cleaning won't restore a proper watertight fit — replacement is the reliable fix once the gasket itself is damaged.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine LG OEM Part ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
