Search results for "dishwasher Thermostat"

Genuine Bosch OEM Bosch 00640476 Dishwasher Genuine OEM Terminal Box Original Bosch dishwasher terminal box with terminal block for select Bosch, Thermador, Gaggenau, and Kenmore dishwashers. Product Overview The Bosch 00640476 Dishwasher Terminal Box is a genuine OEM electrical connection enclosure used on compatible dishwashers. It houses the terminal block where household electrical power connects to the dishwasher wiring harness. This assembly is supplied with the terminal block. The separate wiring/terminal-box cover is not included; Bosch identifies the matching cover as part 00640477. Quick Answer 00640476 is a Genuine Bosch OEM dishwasher terminal box with terminal block. It replaces earlier part 640476. The cover is sold separately as 00640477. Common Problems This Part May Fix Dishwasher will not start because of a damaged power connection Burned, overheated, or melted terminal connections Loose or damaged line-voltage wiring connection Damaged terminal block or terminal-box housing Intermittent power caused by compromised terminal connections Replaces and Cross-References 00640476, 1378543, 640476, ABS11577, AP3962500, EAP8729475, PD00023793, PS8729475 Cross-reference numbers are provided for identification. Bosch 00640476 is the Genuine OEM part. Compatibility Used on select Bosch-built dishwashers sold under Bosch, Thermador, Gaggenau, and Kenmore brands. Verified model examples include: SHE55C05UC/58 SHE43F15UC/61 SHE4AM16UC/02 SHX3AM06UC/01 SHX3AR56UC/07 S36KMK15UC/05 DWHD410HPR/60 63013903010 63013909012 Important: This is only a partial compatibility list. Bosch uses E-Nr./model revisions, so verify the complete model number including the suffix before ordering. Key Features Genuine Bosch OEM replacement part Includes terminal box and terminal block Connects household electrical power to dishwasher wiring Replaces Bosch part 640476 For select Bosch-built dishwasher platforms Cover 00640477 is sold separately Product Specifications Manufacturer Part Number 00640476 Manufacturer Bosch Part Type Dishwasher Terminal Box / Terminal Block Assembly Condition New Part Quality Genuine OEM Terminal Block Included Yes Cover Included No Matching Cover 00640477, sold separately Application Select Bosch-built dishwashers Installation Notes Shut off the dishwasher circuit breaker and verify power is off before beginning service. Remove the lower access panel as required for the model. Photograph and label existing wire connections before disconnecting them. Inspect supply wiring and the dishwasher harness for heat damage, burned insulation, or loose conductors. Transfer wiring to the new terminal block according to the dishwasher wiring diagram and installation instructions. Secure strain relief and wiring so no bare conductor is exposed. Install the proper terminal-box cover before restoring power. Electrical safety: This part carries household line voltage. If wiring is burned, melted, or damaged, correct the underlying connection problem and replace damaged wiring as required. Installation should be performed by a qualified person when local electrical codes or conditions require it. Frequently Asked Questions Is 00640476 a Genuine Bosch OEM part? Yes. It is manufactured by Bosch as an original equipment replacement terminal box. Does this include the terminal block? Yes. Bosch describes 00640476 as a terminal box with terminal block. Is the cover included? No. The matching wiring/terminal-box cover is Bosch part 00640477 and is sold separately. Does 00640476 replace 640476? Yes. 640476 is the earlier Bosch part number superseded by 00640476. Will it fit every Bosch dishwasher? No. Compatibility depends on the full Bosch E-Nr./model and revision. Verify the complete model number before purchase. Shop With Confidence Use the complete dishwasher model or E-Nr. to confirm fitment before ordering. Genuine Bosch OEM construction helps ensure the correct electrical connection design for compatible models. Genuine Bosch OEMTerminal Block IncludedCompatibility SupportNew Part

Read more less

DA32-00006W Genuine Samsung OEM Refrigerator Thermistor Refrigerator defrost temperature sensor. Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681. The Samsung Defrost Sensor is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.  

Read more less

DD31-00016B Dishwasher Drain Pump Motor - Compatible with Samsung Dishwashers Product Description Restore your dishwasher’s performance with the DD31-00016B Dishwasher Drain Pump Motor. This genuine OEM replacement pump ensures efficient water drainage during wash and rinse cycles, preventing water pooling and error codes. Designed for Samsung dishwashers. Replaces part numbers: DD31-00016B, AP7244901, PS17504318, EAP17504318, PD00089738. Verify your model number or contact support for assistance. Key Features: ✅ Brand Compatibility: Fits select Samsung dishwasher models. 💧 Specifications: OEM drain pump motor, 120V, 60Hz, 3.5" x 3.5" x 2.5", with plastic impeller and electrical connector for reliable drainage. DD31-00016B Motor Bldc PUMP; BD15-3C, 2800-3400RPM, 230 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, pliers, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves water pooling, poor drainage, or 5E/SE error codes. Safety First: Unplug the dishwasher and turn off the water supply before installation to avoid shock or leaks. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dishwasher running smoothly today! Add to cart now for a budget-friendly fix!

Read more less

WR50X60 Refrigerator Genuine OEM Defrost Thermostat – For GE, Hotpoint, and Kenmore Product Overview The WR50X60 Refrigerator Defrost Thermostat is a genuine OEM part designed to regulate the defrost cycle by monitoring the temperature near the evaporator coils. When the temperature drops to a preset level, the thermostat activates the defrost heater to melt frost and maintain proper airflow. A faulty defrost thermostat can cause excessive frost buildup and cooling problems. This OEM replacement ensures reliable operation and is ideal for long-term use in compatible refrigerator models. Replaces Part Numbers This OEM thermostat replaces WR50X60, 3489, WR23X5030, WR50X0005, WR50X0007, WR50X0010, WR50X0011, WR50X0017, WR50X0021, WR50X0023, WR50X0026, WR50X0027, WR50X0036, WR50X0060, WR50X0076, WR50X0077, WR50X0089, WR50X0091, WR50X0093, WR50X0101, WR50X0105, WR50X0107, WR50X0110, WR50X0111, WR50X0115, WR50X0125, WR50X10, WR50X101, WR50X105, WR50X107, WR50X11, WR50X110, WR50X111, WR50X115, WR50X125, WR50X17, WR50X21, WR50X23, WR50X26, WR50X27, WR50X36, WR50X5, WR50X5009, WR50X5026, WR50X7, WR50X76, WR50X77, WR50X89, WR50X91, WR50X93, AH303547, EA303547, AP2071242, PS303547. It offers a direct fit and performance consistent with original factory-installed components. Compatible Brands Compatible with GE, Hotpoint, and Kenmore refrigerators made by GE. It fits various top-freezer, bottom-freezer, and side-by-side models that use this thermostat in their defrost systems. Fixes the Following Issues Frost accumulation in freezer Refrigerator not defrosting Blocked airflow due to ice Inconsistent cooling performance Why Buy from Parts‑O‑Matic 100% genuine OEM part for guaranteed compatibility Fast and free shipping throughout the U.S. Trusted by appliance technicians and DIYers Hassle-free returns and responsive support

Read more less

WD12X24058 Dishwasher Genuine OEM Detergent Dispenser Detergent Dispenser  Fits select LG Dishwasher models. Replaces Part Numbers: AGM75469801, AP6234070, PS12078829. Description: This Detergent Module is a Genuine OEM part for select LG dishwasher models. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.

Read more less

XPARTCO DD31-00005A Dishwasher Drain Pump Motor The XPARTCO DD31-00005A is an aftermarket replacement drain pump motor for Samsung dishwashers. This pump uses an internal impeller to force wastewater out of the tub and through the drain hose during the drain phase of the wash cycle — it's the component doing the physical work every time your dishwasher empties itself between cycle stages and at the end of the wash. Rated 120V, 0.8A. Over time, the impeller can wear down, debris can jam the motor, or the motor windings themselves can fail electrically. A failing drain pump produces a very recognizable pattern: standing water left in the tub after a cycle finishes, water leaking from underneath the dishwasher, unusually loud or grinding noise during the drain phase, or a pump that audibly tries to run for a moment and then shuts off right away without actually clearing the water. It directly replaces AP4342621 and PS4222308. Quick Answer The XPARTCO DD31-00005A Dishwasher Drain Pump Motor fixes Samsung dishwashers that won't drain, leave standing water in the tub, leak underneath the unit, or run unusually noisy during the drain phase. 120V, 0.8A. Replaces AP4342621, PS4222308. This is the drain pump — not the same part as the wash/circulation pump (DD31-00004B), which handles spraying water during the wash itself rather than draining it afterward. Common Problems This Part Fixes Dishwasher not draining — standing water left in the tub after a cycle Water leaking from underneath the dishwasher Unusually loud, grinding, or strange noise during the drain phase Pump that tries to run briefly, then shuts off right away without draining Dishwasher running noisily overall Cycle that stalls or won't advance past the drain step Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher drain pump motor directly replaces the following OEM and cross-reference part numbers: DD31-00005A, 1550731, DW0005A, AP4342621, ASM35435 PD00002014, PS4222308 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drain pump motor is compatible with select Samsung dishwashers, including model numbers such as: DMR57LFB, DMR57LFS, DMR57LFW DMR77LHB, DMR77LHS, DMR77LHW DMR78AHB, DMR78AHS, DMR78AHW DMT300RFB, DMT300RFS, DMT300RFW DMT400RHB, DMT400RHS, DMT400RHW DMT800RHB, DMT800RHS, DMT800RHW Note — drain pump, not wash pump: This is the drain pump, which removes wastewater from the tub. It is a different part from the DD31-00004B wash/circulation pump motor, which sprays water through the spray arms during the wash itself. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pump your dishwasher needs. Key Features Aftermarket replacement drain pump motor — removes wastewater from the tub during the drain phase Resolves "not draining," "standing water," "leaking underneath," and "noisy drain phase" symptoms caused by pump failure Impeller-driven design for efficient water removal through the drain hose Rated 120V, 0.8A Direct drop-in replacement — matches the original mounting and hose connections Replaces AP4342621 and PS4222308 Compatible with a range of Samsung dishwasher models Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number DD31-00005A OEM Part Number DD31-00005A Part Type Dishwasher Drain Pump Motor Condition Aftermarket Replacement Brand Samsung Function Removes wastewater from the tub during the drain phase Voltage 120V Amperage 0.8 A Related Part DD31-00004B wash/circulation pump (different function, sold separately) Repair Difficulty Moderate — tight working space under the unit Quantity 1 drain pump motor Compatible Brand Samsung Installation Notes ⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting — Remove Standing Water First Unplug the dishwasher and shut off the water supply before beginning. Wear work gloves. If there's standing water left in the tub from the original failure, remove as much as possible by hand with a cup or towel before starting the repair. Access to the drain pump is typically from underneath the unit, which can mean a tight working space — pulling the dishwasher partially out from under the counter, or working from the front after removing the lower access panel, makes this considerably easier depending on your installation. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the drain hose connections from the old pump, remove its mounting screws or clips, and pull it free. Install the new DD31-00005A pump in the same position, reconnect the drain hose connections securely, and reconnect the electrical connector fully. Restore the water supply and power, then run a cycle and check underneath for leaks while confirming the tub drains completely at the end. Tools needed: Phillips screwdriver, pliers, towels or a small cup for removing standing water, work gloves. Frequently Asked Questions My dishwasher pump tries to run for a second, then shuts off. Is that the drain pump? Yes, this is a documented symptom of a failing drain pump motor — one customer described exactly this pattern, where the pump attempted to run and then shut off right away without actually clearing the standing water. This typically points to a motor that's jammed, worn, or electrically failing rather than a clog, since a simple clog usually lets the motor keep running (just ineffectively) rather than shutting off immediately. Access to my drain pump is really tight. Is that normal? Yes, this is a common challenge with under-counter dishwasher installations — the drain pump often sits low and toward the back, and reaching it can mean working in a cramped space regardless of the model. Removing standing water first and having patience with the process makes a real difference, and pulling the unit partially forward, if your installation allows it, can improve access significantly. Is this the same as the wash pump on my dishwasher? No. This DD31-00005A is specifically the drain pump, which removes wastewater from the tub. Your dishwasher's separate wash/circulation pump (DD31-00004B) is what sprays water through the spray arms during the actual wash portion of the cycle. If your dishwasher isn't cleaning dishes well but drains fine, the wash pump — not this drain pump — is more likely the issue. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical rating, impeller design, and mounting configuration of the original DD31-00005A drain pump motor used in compatible Samsung dishwashers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WPW10605057 Genuine OEM Whirlpool Dishwasher Pump & Motor Assembly The WPW10605057 is a genuine Whirlpool OEM circulation pump and diverter motor assembly for Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Ikea dishwashers. This assembly pumps water up through the spray arms throughout the wash cycle, and the integrated diverter motor controls which spray arm receives that water at any given moment. This assembly includes the circulation pump and diverter motor only — it does not include the drain pump, which is a separate component on this platform. Over time, the pump motor's internal windings can wear out or fail electrically, or the diverter mechanism can stick or bind. A failing assembly typically shows up as a dishwasher that isn't washing dishes properly because water isn't circulating through the spray arms, or leaking from underneath the unit. Whirlpool's own guidance recommends checking the motor's resistance with a multimeter if water isn't circulating, to confirm the assembly before replacing it. It directly replaces AP6023350, WPW10482502, W10482502, W10605057, 3021439, 3023239, PS11756692, W10236194, W10534160N, W10300740, and W10500285. Quick Answer The WPW10605057 Genuine OEM Whirlpool Dishwasher Pump & Motor Assembly fixes Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Ikea dishwashers that aren't washing dishes properly because water isn't circulating, or that are leaking from underneath. Includes the circulation pump and diverter motor — not the drain pump. Replaces WPW10482502, W10482502, W10605057, 3023239, W10300740, W10500285, AP6023350, AWP51141, PD00026666, PS11756692. Check the motor's resistance with a multimeter before replacing to confirm this assembly is actually the cause. Common Problems This Part Fixes Dishes not getting clean because water isn't circulating through the spray arms Dishwasher leaking from underneath the unit Weak or absent water spray during the wash cycle Motor humming without spraying water normally Inconsistent washing results from cycle to cycle Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dishwasher pump and motor assembly directly replaces the following OEM and cross-reference part numbers: WPW10605057, WPW10482502, W10482502, W10605057, 3023239, W10300740, W10500285, AP6023350, AWP51141, PD00026666, PS11756692. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This pump and motor assembly is compatible with select Whirlpool dishwashers, and also fits select Kenmore, KitchenAid, Jenn-Air, Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Ikea dishwashers built on the Whirlpool platform, including model numbers such as KDTE104ESS, WDT710PAHZ, KDFE104DSS, WDT780SAEM, and WDT710PAHB. Note — circulation pump only, not the drain pump: This assembly includes the circulation pump and diverter motor. The drain pump on this platform is a separate component and is not included with this assembly. If your dishwasher isn't draining rather than not washing properly, you likely need the drain pump instead. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which part your dishwasher needs. Key Features Genuine Whirlpool OEM part — factory-specified pump and diverter motor design Includes the circulation pump and diverter motor, which controls spray arm water flow Resolves "not washing properly," "water not circulating," and "leaking underneath" symptoms Factory Certified Part built to Whirlpool's engineering specifications Direct drop-in replacement — matches the original mounting and hose connections Replaces WPW10482502, W10482502, W10605057, 3023239, W10300740, W10500285, AP6023350, AWP51141, PD00026666, PS11756692 Compatible with Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag, Amana, Magic Chef, Admiral, Norge, Roper, and Ikea dishwashers Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, typically about 30 minutes Product Specifications Part Number WPW10605057 Part Type Dishwasher Circulation Pump & Diverter Motor Assembly Condition Genuine OEM Brand Whirlpool Function Circulates water through the spray arms; diverter motor controls spray arm flow Includes Drain Pump No — sold separately Repair Difficulty Moderate — approx. 30 minutes Quantity 1 pump and motor assembly Compatible Brands Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag, Amana, Magic Chef, Admiral, Norge, Roper, Ikea Installation Notes ⚠️ Unplug Dishwasher And Shut Off Water Supply Before Starting Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Remove the lower dish rack, the impeller/spray arm, and the drain filter to access the interior floor of the tub. Working from underneath the dishwasher, release the drain hose from the pump using pliers, then hand-unscrew the drain pump and temperature sensor about a quarter-turn each, being careful to release the small clip holding the drain pump in place — leave both of these components in place, since they're not part of this replacement. Release the three levers that clamp the pump and motor assembly to the bottom of the dishwasher, positioned roughly at 0, 120, and 240 degrees around the assembly. Photograph the electrical connections before disconnecting anything, since keeping track of exactly how everything was wired makes reassembly straightforward. Pop the old assembly up and out through the bottom of the dishwasher. If your old assembly used a separate counterweight, transfer it to the new assembly. Install the new WPW10605057 assembly through the same opening, reconnect all electrical connections exactly as photographed, and re-engage the three clamping levers. Reconnect the drain pump, temperature sensor, and drain hose you set aside earlier. Reinstall the drain filter, spray arm/impeller, and lower rack. Restore water and power, then run a test cycle to confirm normal water circulation with no leaks underneath. Tools needed: multi-screwdriver, pliers, work gloves. Frequently Asked Questions My dishwasher isn't cleaning dishes well. How do I know if this is the right part? Whirlpool's own guidance recommends checking the pump motor's resistance with a multimeter first if water isn't circulating properly. If the motor tests outside its expected resistance range, or shows no continuity at all, that confirms this assembly has failed and needs replacing rather than a different component being at fault. Should I replace the drain pump at the same time? Not necessarily — this assembly doesn't include the drain pump, and if your dishwasher is washing normally but just not draining, the drain pump (a separate part) is the more likely cause rather than this circulation assembly. If both symptoms are present, it's worth checking both components, but they aren't sold together in this listing. Do I need to replace the counterweight or reuse the old one? If your dishwasher's original assembly used a separate counterweight component, transfer it from the old assembly to the new one during installation rather than assuming a new one is included. Check your specific model's parts diagram if you're not sure whether this applies to your dishwasher. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original pump design, diverter motor function, and mounting configuration of the circulation pump and motor assembly originally installed in your dishwasher. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ES16100 Dishwasher Door Switch Replaces Part Numbers: WD21X10261, 1263984, AH1481922, AP3994765, EA1481922, 16100, ES16100, PS1481922, WD21X0557, WD21X557 Description: The Interlock Switch is a replacement part for specific GE, Hotpoint electric and gas dryer and dishwasher models. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10757833 Dishwasher Control Panel Fits specific KitchenAid dishwasher models. Replaces Part Numbers: W10757833, 8531268, 3452787, 8531265, 8531537, 8564487, 8564565, AP5956414, PS10064580. Description: This Rack Adjuster is a Genuine OEM part for Whirlpool dishwashers, designed to allow for the easy adjustment of the dishwasher rack's height. This feature accommodates dishes of various sizes. By providing the flexibility to adjust the rack height, this part enhances the dishwasher's adaptability to different washing needs.

Read more less

W11665769 Dishwasher Sump Pump and Motor Pump and Motor Assembly Replaces Part Numbers: W11665769, W11085683, W10917110, W11164469, AP7212556, PS16875975. Description: This dishwasher pump and motor assembly is compatible with specific Whirlpool, Maytag, Kenmore dishwasher models. It is supplied directly by the original manufacturer to ensure that it fits perfectly with your model. The pump and motor are responsible for moving water throughout the dishwasher during the wash cycle. The pump draws water from the tub and pumps it through various channels, such as the detergent dispenser, spray arms, and drain hose. The motor provides the power necessary to drive the circulation pump, causing the pump to rotate and circulate water. If the assembly is faulty, you will notice difficulties starting or filling the dishwasher, poor cleaning performance, incomplete cycles, and water leaks.

Read more less

Choice 8557403 Dryer Thermostat  Replaces Part Numbers: WP8557403, 8557403, 1180102, AP6013164, AWP48681, EAP11746386, PD00003588, PS11746386 Description: This Dryer Thermostat is a replacement part for select Kenmore, Maytag, Whirlpool dryer models. It regulates the temperature inside the dryer, ensuring that it maintains the correct heat levels for safe and efficient drying cycles.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

9759242 Oven Thermal Fuse  This non resettable oven thermal cut out fuse acts as a safety cutting power to the oven if it becomes over heated. Replaces Part Numbers:  WP9759242, 9759242, 4452223, OEM18042050, AP6014015, PS11747248, WP9759242VP Description: This Thermal Fuse is a Genuine part for specific KitchenAid, Kenmore, Whirlpool oven models. It acts as a safety device that cuts off power to the oven if it overheats, preventing potential damage or fire hazards. Common causes of a bad thermal fuse can include prolonged exposure to high temperatures, electrical surges, or faulty oven components that cause overheating. When the fuse blows, it disrupts the electrical circuit, rendering the oven inoperative until the fuse is replaced.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less